Develop Bugs

Bottom buttons stops working.

Hi.
I have strange problem. It starts few weeks ago with no purpose..
Sometimes my bottom buttons doesn't work. It happneds for example, when I'm tying to scroll email with Dpad. Sometimes when i try to scroll thru files in total commander. After scrolling few lines, they just stop working. Upper buttons works. Screen works.
What I did untill now with no results:
- flashed official rom thru PC
- flashed AT&T Official
- disassembling and cleaning lower buttons.
It looks like software problem, but it happends on clean official roms without any 3-rd apps..
Some suggestions?
Thx

do a search for white screen in titles...ur problem may be the dpad connector comes loose and the white screen thread talks about how to fix it

try a new rom my wifes phone did the same thing with at&t official wm6 rom I have since flashed almost every rom from here and never had a problem hope this helps

brorex said:
try a new rom my wifes phone did the same thing with at&t official wm6 rom I have since flashed almost every rom from here and never had a problem hope this helps
Click to expand...
Click to collapse
Thank You. I've tried few roms.. Now running CRC 11
I think it's a hardware problem. I've found some thread about similiar problem. Now I'm testing
Thx Dillsnik

I had this problem with a Hermes and I couldn't fix it no matter what I did. And I tried everything.
It seems it's some weird hardware problem. Soon you'll have problems with the softkeys too.
If anyone fixed this (except flashing a new rom, because that doesn't work), it would be an interesting thing to know.

Well, when it happends, all lower buttons stops working. gren, red phone, softkeys etc.
I just plug and unplug connector few times and for now it;s ok.
I will report if there will be some changes.
Maybe it's time for some changes I think Kaiser's will be cheaper in a moment

anichillus said:
I had this problem with a Hermes and I couldn't fix it no matter what I did. And I tried everything.
It seems it's some weird hardware problem. Soon you'll have problems with the softkeys too.
If anyone fixed this (except flashing a new rom, because that doesn't work), it would be an interesting thing to know.
Click to expand...
Click to collapse
mine has been doing that for months (lucky my hermes is my backup device). its really strange but then again expected after ive dropped it so many times as well as throw it at my colleagues when they piss me off.
1) dpad stops responding after some time.
2) call/end buttons stop responding
3) softkeys dont work after this
4) 90% white screen - i can still see whats on the screen but it looks like its washed out and saturated to a sever point
the only thing you can do is if your device is still under warranty get it fixed.

Warrianty it's a faaaar away past

I can't say with any certainty this will help anybody - but I experience this same issue, regardless of the rom... What I always do - hit the Email button... I know it sounds odd, but it always seems to work... It launches email, which (if i don't need it) I just close right away and then the other buttons seem to magically work... I know it sounds lame - but honest - it works on my phone...

If that doesn't work, you may have to try the following link regarding d-pad and white screen

I had same problems, d-pad buttons stopped working then I got the white screen of death. I replaced the ribbon cable but it didn't help. I replaced the d-pad pcb board and everything is back.

Where did You get this board? Ebay?

http://www.cellulardr.com/products.php?cat=156

I don't think they send to Poland, but thx anyway..

Sorry for diggin this topic, but cellurar.dr is not responding my emails and I can't find/buy this board..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Maybe someone know where can I buy this??

Lenovo A-3000 Factory Mode (Chinese List) Explained

Factory Mode (Chinese List) Explained:
You can get into this mode (and do some useful and dangerous stuff) by:
1. Power the device off.
2. Hold “Volume Down” then connect USB cable.
This is what you get:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
According to documentation [& a lot of time and effort on google-translate:silly:] those mean:
Code:
[COLOR="RoyalBlue"]工厂模式
Factory Mode[/COLOR]
感应器校准 Sensor Calibration
自动测试 Automatic Test
单项测试 Individual Tests
测试报告 Test Report
调试测试项 Debugging Test Items
浦除e MMC Format e-MMC
版本信息 Version Information
重启手机 Restart The Phone
And If you get into the indevidual tests screen:
those mean:
Code:
[COLOR="RoyalBlue"]单项测试
Individual Test[/COLOR]
按键 Buttons
触摸屏 Touch Screen
背光等级 Backlight Levels
e MMC e-MMC
存储卡 Memory Cards
S I M卡探测 SIM Card Probe
振动器 Vibrator
L E D灯 LED Lights
实时时钟 Real-Time Clock
接收器 Receiver
扬声器OC测试 Speaker OC Test
耳机 Headphones
加速度传感器 Accelerometer
加速度传感器校准 Accelerometer Calibration
光传感器距离传感器 Proximity & Light Sensors
主照相机 Main Camera
副照相机 Secondary Camera
GPS定位 GPS Receiver
F M收音机 FM Radio
蓝牙 Bluetooth
Wi - F i Wi-Fi
电池和充电 Battery & Charging
闲置电流 Standby
Hope this helps.....

Very very useful info. thanks a lot.

azam426 said:
Very very useful info. thanks a lot.
Click to expand...
Click to collapse
any idea to transplant some roms to this tablet？
maybe there‘re little users who using this tablet。

I've asked someone who's having a look at source see if he can port kk but said some permission problems with source straight away, still looking at it though
Sent from my IdeaTab A3000-F using XDA Premium HD app

thanx mr hosamn u helped me :angel:

wsdyleon said:
any idea to transplant some roms to this tablet？
maybe there‘re little users who using this tablet。
Click to expand...
Click to collapse
I believe there are lots of users having A3000. But the tablet is a bit special and maybe that causes headaches to devs.
Does anybody know if the tablet has additional locks, like locked bootloader?

thanks so much
I say a million thank you to you for this useful post

one question
thanks a lot for the details. I have a lenovo s968t and i am getting the same menu in factory mode. my issue is there is no option for installing zip or doing anything with the phone. how then do i remove this and get a menu for modifying and installing stuff? i am downloading a custom rom from needrom and then will try to install. i am not sure how that'll go. any suggestions?

Dear all, i entered into the factory mode.how can i get out of it? I have a lenovo tab a10-70

Same bootloader on phone
I have the same bootloader on a phone I got, it's some generic chinese model probably meant to imitate a Samsung or something

Thank You! You helped me a lot. In my case, I had my acceleration sensor Y-axis off, for some reason. My phone is Just5 Blaster2, which is kind of the same as Elephone P6000. My chinese menus structure was different, but I was able to find one that you translated "Accelerometer Calibration", and it did just that. Awesome! :good:
I was pretty pissed off about incorect null-zone of that thing, now it is fixed. :victory:

thnks a lotttttttttt it really helped me!!!!!!!!!!!!

Lenovo Yoga Tablet
Thanks for this, it was really helpful.
I have a Lenovo Yoga Tablet 10 and accessing the boot menu is not great. Instead of going to the English menu I accessed the Chinese menu and might have accidentally selected the Accelerometer sensor calibration and one of the options because the auto-rotation has stopped working when I turned on the tablet. What to do in this case? Lay the tablet on flat surface and do not touch while calibrating? There are three options there, my guess is: Clear Calibration, Do Calibration (20%), Do Calibration (40%). What do these do?

Hello!
Where can I find an option to wipe cache partition in this menu?
Thank you

I can not see where viewing a bunch of Chinese characters without a translation is any help at all.

Weird notification UI changes in Android 11/OneUI 3.0 update.

I've been working with the new update the last few days, and noticed some odd changes made by Samsung.
Most annoying is this huge gap between my toggles and brightness slider/notifications. I have disabled the media controls and have no background apps running.
I think they attempted to make notifications easier to access for one hand operation, but we need a way to change this! Or give me the option to add all of my toggles into the gap!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I think it's the place for "Device and Media buttons". Try to activate in "Quick panel layout". There's "Show device and media buttons above notification" option. Maybe on then off.

I don´t have that gap in my Note 10+. Just below the 6 icons I have the brightness slider. Weird.

No gap here either.

I have similar problem. Only that i have a problem with whole screen notification window even though it is empty.

blake .l said:
No gap here either.
Click to expand...
Click to collapse
What carrier and version are you on?

paggps said:
I don´t have that gap in my Note 10+. Just below the 6 icons I have the brightness slider. Weird.
Click to expand...
Click to collapse
Carrier/version?

sarjarim said:
I think it's the place for "Device and Media buttons". Try to activate in "Quick panel layout". There's "Show device and media buttons above notification" option. Maybe on then off.
Click to expand...
Click to collapse
Here. I have tried it off and on and it's the same gap. I can swipe for media controls at all times even though my running media app is closed.

deepen915 said:
What carrier and version are you on?
Click to expand...
Click to collapse
AT&T

deepen915 said:
Here. I have tried it off and on and it's the same gap. I can swipe for media controls at all times even though my running media app is closed.
Click to expand...
Click to collapse
Maybe u can leave it on, just so it wouldn't look wierd.

sarjarim said:
Maybe u can leave it on, just so it wouldn't look wierd.
Click to expand...
Click to collapse
Figured it out! Tidal was running in the background but not showing, so I turned off the app notifications for it.
Spoiler: Screen shot

deepen915 said:
I've been working with the new update the last few days, and noticed some odd changes made by Samsung.
Most annoying is this huge gap between my toggles and brightness slider/notifications. I have disabled the media controls and have no background apps running.
I think they attempted to make notifications easier to access for one hand operation, but we need a way to change this! Or give me the option to add all of my toggles into the gap!
View attachment 5198899
Click to expand...
Click to collapse
That usually happen when no factory format is made between hard UI changes.
The objects and placeholders stay there even though they are empty. Have you tried a factory reset after UI3 update?
That also happened on KITKAT to Marshmellow and was a usual issue when the update wasn't factory reset afterwards.
The UI would update and new elements were put in place but the old ones would still be there and originated large gaps or invisible toggles.

Bomn said:
That usually happen when no factory format is made between hard UI changes.
The objects and placeholders stay there even though they are empty. Have you tried a factory reset after UI3 update?
That also happened on KITKAT to Marshmellow and was a usual issue when the update wasn't factory reset afterwards.
The UI would update and new elements were put in place but the old ones would still be there and originated large gaps or invisible toggles.
Click to expand...
Click to collapse
Turned out to be a rogue app but thanks!

Question how to disable that mini wakeup screen on pixel6 pro when touching the phone having fingerprint unlock ?

https://photos.app.goo.gl/BinpgKL3U8sFzcy38
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
there's the screen im talking about, when you even touch the phone that screen seems to happen for you not to even touch the screen to input the fingerprint.
i've walked the whole config and found nothing.
it's deffinitely NOT the raise to wake, it's somethign else, but i dont know if its even workaroundable otherthan disaling the FPR which i dont want to.

Did a quick search and found there is an ADB command to disable it. I haven't tried it, so I am not sure if it works or if there are any issues that come up after running it, but if you want to check it out here you go
https://www.reddit.com/r/GooglePixel/comments/qvper2

robertbarber said:
Did a quick search and found there is an ADB command to disable it. I haven't tried it, so I am not sure if it works or if there are any issues that come up after running it, but if you want to check it out here you go
https://www.reddit.com/r/GooglePixel/comments/qvper2
Click to expand...
Click to collapse
Thanks robert !
found this one also will try that one out.
i really really appreciate it.

I think I am missing something....thats a setting in Lock Screen....

cmh714 said:
I think I am missing something....thats a setting in Lock Screen....
Click to expand...
Click to collapse
I'm confused also. That just looks like the aod. What's the problem here?

You mean that you have AOD off, and when you touch the screen you want to go directly to homescreen instead of the AOD, right?
The behavior on mine is exactly this one, I would like to have the AOD instead...

That "quick pickup" BUG has been really annoying me. It started with the december update -- did not exist before then. Glad to see a solution for it.

96carboard said:
That "quick pickup" BUG has been really annoying me. It started with the december update -- did not exist before then. Glad to see a solution for it.
Click to expand...
Click to collapse
the bug is from nov, or maybe from beginning.

Is this about the phone screen constantly waking up whenever you touch the phone, regardless of whether you have disabled things like Always On Display and all the gestures like "Lift to wake phone"? If so, there's a fix you can use through ADB. I found this solution on reddit, and it's worked perfectly for me. No downsides.
Code:
adb shell settings put secure doze_quick_pickup_gesture 0
Found the solution from this reddit thread:
https://www.reddit.com/r/GooglePixel/comments/qvg2nz/_/hkx0fiv

Perhaps I'm a little OT, but can you please help me which settings/adb commands should I use?
I have the AOD set to off, I would like that my phone shows the ambient display of first post when I lift the phone or touch the screen.
Thanks!

gpvecchi said:
Perhaps I'm a little OT, but can you please help me which settings/adb commands should I use?
I have the AOD set to off, I would like that my phone shows the ambient display of first post when I lift the phone or touch the screen.
Thanks!
Click to expand...
Click to collapse
Try going to Settings -> System -> Gestures. In there, toggle the Lift to Check and Tap to Check options.

vlubosh said:
the bug is from nov, or maybe from beginning.
Click to expand...
Click to collapse
No, didn't exist at the beginning. Started with December.

While the options are there to deactivate it I find it far too sensitive to the slightest touch sets it off

96carboard said:
No, didn't exist at the beginning. Started with December.
Click to expand...
Click to collapse
Existed since my phone arrived in October. Adb command fixed it.

btonetbone said:
Try going to Settings -> System -> Gestures. In there, toggle the Lift to Check and Tap to Check options.
Click to expand...
Click to collapse
Yes, thanks, I did this, and when lift to check is set OFF, I have the ambient display when I lift up the phone, and this is OK for me. But if I enable Tap to check, the phone goes to homescreen, if I disable it the screen remains dark.

Question Video Fainting while playing on the device

Hi, well I was new here so I was thinking of starting with one problem at a time but,
Whenever I try to play a video, like from all platforms (Prime Video, Youtube, video players like VLC, websites, etc....), the normal color of the video is hindered like there appears to be some kind of a fainting screen overlapping the video reducing the color and playback experience.
And the main thing is this seems to go away when we press the Volume rocker button and until the volume bar appears on the screen the natural colors of the video appear but as soon as it disappears, it goes back to the hindered color version.
It seems like a film is pasted over the screen area and as soon as you press the volume rocker, it is removed!
I have tried formatting and also deleting specific apps used for playing videos and reinstalling them, but of no avail.
Could someone maybe help me out?

Idk if it will work but I would suggest to turn of all options in menu called "Dark Mode options"
Maybe it will help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

adiraghuwanshi said:
Hi, well I was new here so I was thinking of starting with one problem at a time but,
Whenever I try to play a video, like from all platforms (Prime Video, Youtube, video players like VLC, websites, etc....), the normal color of the video is hindered like there appears to be some kind of a fainting screen overlapping the video reducing the color and playback experience.
And the main thing is this seems to go away when we press the Volume rocker button and until the volume bar appears on the screen the natural colors of the video appear but as soon as it disappears, it goes back to the hindered color version.
It seems like a film is pasted over the screen area and as soon as you press the volume rocker, it is removed!
I have tried formatting and also deleting specific apps used for playing videos and reinstalling them, but of no avail.
Could someone maybe help me out?
Click to expand...
Click to collapse
I've the same issue , did you fixed it?

ama3l said:
Idk if it will work but I would suggest to turn of all options in menu called "Dark Mode options"
Maybe it will help
View attachment 5656305
Click to expand...
Click to collapse
That dosent help but thank you

Varun Dusane said:
I've the same issue , did you fixed it?
Click to expand...
Click to collapse
Nope I have showed it to the xiomi sevice center and they think it might be a motherboard issue and asked me to let them keep the device for a couple of days but since I'm not free enough I couldnt give it to them! Am planning on giving it next week!

Varun Dusane said:
I've the same issue , did you fixed it?
Click to expand...
Click to collapse
Hi there!
I changed my motherboard due to another issue with networks but the video issue still remains!
Now the service center guys are saying that it is a feature in the device but what kind of a feature it is if it doesn't let us use the amoled screen with the original colors and darkness!
Well currently don't know any solution have suggested to feedback app in miui but no updates of the same!
If you have got any solution please do tell!

adiraghuwanshi said:
Hi there!
I changed my motherboard due to another issue with networks but the video issue still remains!
Now the service center guys are saying that it is a feature in the device but what kind of a feature it is if it doesn't let us use the amoled screen with the original colors and darkness!
Well currently don't know any solution have suggested to feedback app in miui but no updates of the same!
If you have got any solution please do tell!
Click to expand...
Click to collapse
Thanks for the update , i've lost hope for the device

this issue was fixed after installing riceDroid rom for me