Hi, i have a gear watch r800 ITV CSC. In recent days an update has been released with the 4.0.0.7 system. I had the 4.0.0.6 system and I changed the CSC setting to XAR. I got the new update but now the command launch_app csc-manager.csc-pre-configuration not work. Sdb find the wear and I can navigate with sub shell but when I send the command I have the following message: launch_app csc-manager.csc-pre-configuration ... successfully launched but in the gear not appear nothing.
Have solution?I have tried various versions of sdb.
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Look into this thread...
Maybe similar way work with SM-R800... SM-R810...
Combination Firmware for SM-R800 is for instance here:
https://forum.xda-developers.com/showpost.php?p=80895699&postcount=5
Be carefully... UNTESTED aaand:
At your own risk!
Best Regards
adfree said:
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Look into this thread...
Maybe similar way work with SM-R800... SM-R810...
Combination Firmware for SM-R800 is for instance here:
https://forum.xda-developers.com/showpost.php?p=80895699&postcount=5
Be carefully... UNTESTED aaand:
At your own risk!
Best Regards
Click to expand...
Click to collapse
this method downgrade my gear?
mago988 said:
this method downgrade my gear?
Click to expand...
Click to collapse
I'm also curious how to change CSC on 4.0.0.7
works like a charm with Samsung pay!!!!:good:
I changed my CSC to Australia to get the Samsung Pay but this disabled VoLTE on my watch. I m now not able to call or receive any calls. I m from India. Watch was originally purchased in Australia.
During this process I was prompted for update which I did and now I m stuck with 4.0.0.7 version and no way to change the CSC back to INU using shell access way.
Only way now looks to use the combination firmware and Odin. But not sure where to find the Combination Firmware for SM-R805F LTE version.
Anyone can point me to right direction to get the required binaries ?
Device Details:
AP : R805FXXU1FSL4
CP: R805FXXU1FSL4
CSC: R805FOXX1FSL4
I'm using GWA2 with LG V50 in South Korea. I found out that it's possible to use ECG and BP function on non-Samsung device by installing tpk through SDB. I tried it but it said General error [-1] on both 23.tpk and BP.tpk. I already tried reset my watch but it still doesn't work and keep saying same error code. Is there anyone who knows the solution?
You can't install Space Shuttle parts onto a chinese bicycle.
hklee28 said:
I'm using GWA2 with LG V50 in South Korea. I found out that it's possible to use ECG and BP function on non-Samsung device by installing tpk through SDB. I tried it but it said General error [-1] on both 23.tpk and BP.tpk. I already tried reset my watch but it still doesn't work and keep saying same error code. Is there anyone who knows the solution?
Click to expand...
Click to collapse
You can try with this for non samsung phone https://forum.xda-developers.com/sm...3/enable-ecgbp-featur-samsung-phones-t4168567
I am trying to have both ECG & BP on my Galaxy Active 2 watch. I have side loaded the BP last June by a tread here (thanks again for that) and yersterday afyer a major update (to Tizen 5.5.0.1) all I could is installing the ECG (which is less important for me) and I can not load the BP.Tpk I keep getting an error from the Tizen Studio Device Manager "Failed to install app. Old version is greater than update request version [ -29] failed. Is there a workaround/solution for that. I really need the BP to work. Even a rollback f the Tizen version is ok.
Many Thanks
Hi
For some reasons I can't get OTA update to tizen 5.5 even if my CSC (ITV) already got it.
Does someone have the netodin files for the R820 ?
There's not yet new firmware for NetOdin...
I have an Active 2 (no LTE version) R820 and a P30 pro with android 10.
History:
- I changed my CSC to Korea (KOO).
- after full update to tizen 5.5.0.1 (OTA), I tried to install both bp and ecg (thread https://forum.xda-developers.com/sm...3/enable-ecgbp-featur-samsung-phones-t4168567)
- bp refused to install (generic error -1)
- ecg installed, paired with modified Samsung Health Monitor Version 1..1.0.175.Caravana.
- When running, it ask to "rest my finger on back button". Tried everything, nothing happens. After maybe 1 minute it exit (probably a timeout check). In the meantime, the green led is very strong and continuous (no pulsing light).
- I downgrade to Tizen 4.0.0.6 (folowing the steps from changing CSC). Installed both bp and ecg (and yes now bp can be installed, but on 4.0.0.6 it's not running with a message 'system not ready')
- update to 4.0.0.8 (OTA) and now BP works flawlessly. ECG has the same problem; could pair with phone, but not starting measurement.
- update to 5.5.0.1 and the same. BP still working, ECG same problem.
Any advice, please?
Maybe it's a VERY stupid question, but... the semi circular contacts near the green led seems somehow coated. Is that ok?
button contact must be broken
adrianzagar said:
I have an Active 2 (no LTE version) R820 and a P30 pro with android 10.
History:
- I changed my CSC to Korea (KOO).
- after full update to tizen 5.5.0.1 (OTA), I tried to install both bp and ecg (thread https://forum.xda-developers.com/sm...3/enable-ecgbp-featur-samsung-phones-t4168567)
- bp refused to install (generic error -1)
- ecg installed, paired with modified Samsung Health Monitor Version 1..1.0.175.Caravana.
- When running, it ask to "rest my finger on back button". Tried everything, nothing happens. After maybe 1 minute it exit (probably a timeout check). In the meantime, the green led is very strong and continuous (no pulsing light).
- I downgrade to Tizen 4.0.0.6 (folowing the steps from changing CSC). Installed both bp and ecg (and yes now bp can be installed, but on 4.0.0.6 it's not running with a message 'system not ready')
- update to 4.0.0.8 (OTA) and now BP works flawlessly. ECG has the same problem; could pair with phone, but not starting measurement.
- update to 5.5.0.1 and the same. BP still working, ECG same problem.
Any advice, please?
Maybe it's a VERY stupid question, but... the semi circular contacts near the green led seems somehow coated. Is that ok?
Click to expand...
Click to collapse
i have same problem,before i was on ZTO and ecg working great and then make the procedure that u do so i can make BP installed and then ECG not starting measurement.do u find any solution?
pornogeroc said:
i have same problem,before i was on ZTO and ecg working great and then make the procedure that u do so i can make BP installed and then ECG not starting measurement.do u find any solution?
Click to expand...
Click to collapse
No, nothing yet. But now I have some hope that is not a hardware problem.
So, the issue is still open, I am open to any advice!
i have changed again to ZTO region that before is working great but now is not working,i have installed previous samsung health monitor but nothing
pornogeroc said:
i have changed again to ZTO region that before is working great but now is not working,i have installed previous samsung health monitor but nothing
Click to expand...
Click to collapse
Tried again with a friend watch (R820, 4.0.0.8) without changing CSC. Same thing. Ecg is running (and Samsung Heatlh recognize it) but no measurement. So definitely not hardware problem.