Related
SM-R805F, bought in Germany.
Changing CSC works flawlessly on this one, the usual method:
* Connect via SDB (wireless or wired connection)
* Run launch_app csc-manager.csc-pre-configuration
* Choose CSC, wait for the watch to reset, all done. SPay works as well now.
eSIM: The Gear S3 LTE models have eSIM RSP v1.x, in case anybody was wondering why LTE/3G connections were not possible in many countries (where operators are probably a bit concerned or regulated WRT security).
Galaxy Watch (well, at least my SM-R805F) supports ONLY RSP v2.x, which means it will work on most European carriers, including Telekom.de. From esim-server, in IDA:
Gear S3: std::string::string(&v8, "/gsma/rsp1/es9plus/initiateAuthentication", &v7);
Galaxy Watch: sub_64FD4(&v14, "/gsma/rsp2/es9plus/initiateAuthentication", "");
Thanks Samsung.
Small update:
The activation of the eSIM should be done on the same CSC as the eSIM network and the mobile phone paired. Once the eSIM is provisioned and the watch has GSM connectivity, the CSC can be changed again, the eSIM profile will stay.
Samsung pay does not work in Germany right now. The app is not available in the app store. Would your procedure allow me to use Samsung pay in Germany?
Gesendet von meinem SM-G965F mit Tapatalk
Samsung Pay works in Germany as a payment method. If you want to enroll your card, it must be supported, which means your bank must accept you to use the card they issued in SPay. I do not know of any German bank that accepts it ... I personally usr a foreign card with SPay (Swiss). It works on all NFC terminals.
It is more about the app not being available for my region (Germany). It is not officially released around here yet.
Gesendet von meinem SM-G965F mit Tapatalk
The app on the watch as well as the SPay companion app on the phone (not to be confused with the one that allows one to pay with the phone) will become available as soon as you change the CSC, say to Italy. If you find a card you can enroll, you can pay with the watch, but not with the phone. The SPay for the phone and the one for the watch are two different animals.
P.S. The original post instructions are just for changing the CSC and getting SPay to run on the watch. How to find a bank to provide a credit card that supports it is a long story that we do not really want to start discussing here.
Hi, I have a Korean SM-R810 and I am very interested in changing it to a US CSC for Samsung pay. You mention aboove that you used the "usual method" is there a thread you could recommend as a guide to the usual method? I searched and came up with this:
https://forum.xda-developers.com/gear-s3/how-to/succesfully-changed-csc-to-xar-to-t3718236
However, I am not sure where you got your mom files, and I can't seem to find any that would be applicable to my model either. My watch is an SM-R810NZDAKOO. The model I want to change it to is SM-R810NZDAXAR.
Thanks for any assistance.
Jenoin said:
Hi, I have a Korean SM-R810 and I am very interested in changing it to a US CSC for Samsung pay. You mention aboove that you used the "usual method" is there a thread you could recommend as a guide to the usual method? I searched and came up with this:
https://forum.xda-developers.com/gear-s3/how-to/succesfully-changed-csc-to-xar-to-t3718236
However, I am not sure where you got your mom files, and I can't seem to find any that would be applicable to my model either. My watch is an SM-R810NZDAKOO. The model I want to change it to is SM-R810NZDAXAR.
Thanks for any assistance.
Click to expand...
Click to collapse
What I did was far easier, but I don't know if the same will work on your model:
* Connect via SDB (wireless or wired connection) e.g. run sdb shell and you should be getting a shell prompt on the watch
* Run launch_app csc-manager.csc-pre-configuration - a list of the available CSC codes will be shown on the watch screen for you to choose from
That's all - no need to flash anything, the watch will either let you change the CSC or not - mine works.
Good luck, and please let me know if it worked out for you.
What's CSC?
Does that mean you can change the region of the watch, i.e. buying it in US or Korea and make it identical to one bought in Europe regarding Samsung Pay?
eloisant said:
What's CSC?
Does that mean you can change the region of the watch, i.e. buying it in US or Korea and make it identical to one bought in Europe regarding Samsung Pay?
Click to expand...
Click to collapse
Yes. You cannot change the model, e.g. SM-R805U to SM-R805F, but often the firmware contains the CSC for multiple countries / regions. In such cases you can switch between them - again, if the firmware allows it.
Run launch_app csc-manager.csc-pre?
Could you help explain what is Run launch_app csc-manager.csc-pre-configuration, is this a application or a command?
This is a command you run from SDB. SDB is a command line application for Samsung hardware:
https://forum.xda-developers.com/gear-s3/how-to/guide-how-to-change-gear-s3-r760-csc-t3784226
(That's a detailed explanation for the Gear S3, but it should be similar for Galaxy Watch)
ecoco1 said:
What I did was far easier, but I don't know if the same will work on your model:
* Connect via SDB (wireless or wired connection) e.g. run sdb shell and you should be getting a shell prompt on the watch
* Run launch_app csc-manager.csc-pre-configuration - a list of the available CSC codes will be shown on the watch screen for you to choose from
That's all - no need to flash anything, the watch will either let you change the CSC or not - mine works.
Good luck, and please let me know if it worked out for you.
Click to expand...
Click to collapse
I can't get it to work yet, after a lot of trouble I was unable to get it to connect directly to watch over WiFi. The rsa notification would never come up on the watch.
I then attempted to connect via USB through my phone (Essential PH-1) which worked ok. However, when I run "launch_app csc-manager.csc-pre-configuration" I get the response "/system/bin/sh: launch_app: not found"
Any advice? An ls of /system/bin does not show a launch_app command.
Thanks for any assistance!
---------- Post added at 12:56 PM ---------- Previous post was at 12:48 PM ----------
I connected my S3 up using the same process and it also didn't work, so I think the issue is that I am only connecting to the phone and not connecting to the watch at all. Not sure how to correct this issue.
I did get my S3 to connect using wifi, it appears that nothing I do will enable the SM-R810 to connect over wifi, I have even installed galaxy watch designer and it is unable to connect to the watch. The RSA authorization just never appears and GWD acts like it didn't detect anything.
---------- Post added at 03:19 PM ---------- Previous post was at 02:24 PM ----------
I finally got it working. I have no idea why I had so much trouble. Steps that I took in order:
* Using Windows 10
* I started by enabling debugging and developer mode and enabling wifi, connecting and getting IP address.
Tried using SDB 2.26 found here https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
- This didn't work, I couldn't see my watch over wifi at all, tried it over and over, never saw the RSA authentication popup, got errors saying it couldn't find device or something (Not "connecting to 192.168.1.118:26101 ... device unauthorized. Please approve on your device.")
Installed Tizen Studio
Installed Galaxy Watch Designer
Tried to connect using Galaxy watch designer, basically same as above but now with a pretty GUI that gave no feedback on why it wasn't working.
Tried to connect over usb cable to phone through BT. SDBoverBT installed on phone but kept giving an error that it wouldn't work to check SPP or BT connection.
GWD did detect my phone just fine though.
I noticed that my S3 would also not connect through my phone at this point. I never figured out why I couldn't get a wired/BT connection to work. Does this maybe require a Samsung phone? Mine is a PH-1.
I did a factory reset on my watch around this point and tried again with GWD but no luck.
Tried using Tizen Studio version of SDB
When starting SDB from Tizen Studio package I would get "* The version of SDB client (3.1.7) and server (2.3.0) are different. This may cause version compatibility problems. It is recommended to use SDB server 3.1.7. *"
According to other forums this was fine. But it wasn't working for me so I decided to try and get rid of the message. I tried to kill the server and restart but it just kept saying the same message. Finally I closed GWD and then killed the server and got the message "info: Server is not running" Great!
Now with server 3.1.7 running I could see the watch finally. I repeatedly tried to connect and finally got the right message "connecting to 192.168.1.118:26101 ... device unauthorized. Please approve on your device."
But the notification didn't popup on the watch. I restarted the watch for about the 10th time and tried to connect again. this time it finally got the RSA popup!
Success!
My Korean SM-R810 (SM-R810NZDAKOO) is now a US model SM-R810 (SM-R810NZDAXAR) by changing CSC. This turned out to be a lot of work to save $40 (Ebay) but I did really want Samsung pay, and it wasn't really worth trying to send it back to Korea.
For those interested, there were about 40 different CSC options available. If useful I can provide a list.
Thanks to the OP for the guide.
Good stuff
Great stuff am happy you got it working, hopefully I get mine sorted soon as well. Having connection issues also
Good to see it works Jenoin!
Could you post a list of available CSC? I'm planning to buy a Korean watch too (really cheap in Seoul airport duty free) and I'd like to confirm I can set it to a French CSC.
eloisant said:
Good to see it works Jenoin!
Could you post a list of available CSC? I'm planning to buy a Korean watch too (really cheap in Seoul airport duty free) and I'd like to confirm I can set it to a French CSC.
Click to expand...
Click to collapse
After I posted that it was 40 before I was kind of second guessing myself, because it didn't seem like it could be so many.
I was way off, it was actually 70! Hope some people find this useful. I still had some trouble this time getting SDB connected. What seemed to work, is to make sure you have enabled developer mode, debugging, and wifi. Restart and wait a couple minutes for it to complete any startup routine that may be running in the background. Ensure the screen is ON but at the home screen/main watch face and then attempt to connect via IP.
XAR ACR AFR ARO ATO AUT BGL BRI BTU BVO
CAC CAM CHC CHO COO DBT ECT EGY EUR ILO
INU ITV KOO KSA LUX LYS MID MWD MXO MYM
NEE NPL PAK PEO PHE PHN ROM SEB SEE SEK
SER SKZ TGY THO THR TMC TPA TPH TTT TUN
TUR UPO UYO XAC XEF XEH XEO XEZ XFA XJP
XME XNZ XSA XSE XSG XSK XSP XTC XXV ZTO
Out of curiosity, what is the price at the duty free store in Korea?
Good luck!
Thank you!
The 46mm bluetooth is roughly 265USD duty free in Korea.
Samsung pay
I successfully changed my region from Korea to EUR and I have not received any prompt for Samsung pay. It's been over 6 hours now. Anyone know how long it should take?
Samsung pay
I successfully changed my region from Korea to EUR and I have not received any prompt for Samsung pay. It's been over 6 hours now. Anyone know how long it should take? I have a non Samsung android phone
I followed this and restarted, restarted and restarted.... still no RSA prompt, any hints to help please?
---------- Post added at 09:46 AM ---------- Previous post was at 09:45 AM ----------
Jenoin said:
After I posted that it was 40 before I was kind of second guessing myself, because it didn't seem like it could be so many.
I was way off, it was actually 70! Hope some people find this useful. I still had some trouble this time getting SDB connected. What seemed to work, is to make sure you have enabled developer mode, debugging, and wifi. Restart and wait a couple minutes for it to complete any startup routine that may be running in the background. Ensure the screen is ON but at the home screen/main watch face and then attempt to connect via IP.
XAR ACR AFR ARO ATO AUT BGL BRI BTU BVO
CAC CAM CHC CHO COO DBT ECT EGY EUR ILO
INU ITV KOO KSA LUX LYS MID MWD MXO MYM
NEE NPL PAK PEO PHE PHN ROM SEB SEE SEK
SER SKZ TGY THO THR TMC TPA TPH TTT TUN
TUR UPO UYO XAC XEF XEH XEO XEZ XFA XJP
XME XNZ XSA XSE XSG XSK XSP XTC XXV ZTO
Out of curiosity, what is the price at the duty free store in Korea?
Good luck!
Click to expand...
Click to collapse
I followed this and restarted, restarted and restarted.... still no RSA prompt, any hints to help please?
Hi, i have a gear watch r800 ITV CSC. In recent days an update has been released with the 4.0.0.7 system. I had the 4.0.0.6 system and I changed the CSC setting to XAR. I got the new update but now the command launch_app csc-manager.csc-pre-configuration not work. Sdb find the wear and I can navigate with sub shell but when I send the command I have the following message: launch_app csc-manager.csc-pre-configuration ... successfully launched but in the gear not appear nothing.
Have solution?I have tried various versions of sdb.
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Look into this thread...
Maybe similar way work with SM-R800... SM-R810...
Combination Firmware for SM-R800 is for instance here:
https://forum.xda-developers.com/showpost.php?p=80895699&postcount=5
Be carefully... UNTESTED aaand:
At your own risk!
Best Regards
adfree said:
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Look into this thread...
Maybe similar way work with SM-R800... SM-R810...
Combination Firmware for SM-R800 is for instance here:
https://forum.xda-developers.com/showpost.php?p=80895699&postcount=5
Be carefully... UNTESTED aaand:
At your own risk!
Best Regards
Click to expand...
Click to collapse
this method downgrade my gear?
mago988 said:
this method downgrade my gear?
Click to expand...
Click to collapse
I'm also curious how to change CSC on 4.0.0.7
works like a charm with Samsung pay!!!!:good:
I changed my CSC to Australia to get the Samsung Pay but this disabled VoLTE on my watch. I m now not able to call or receive any calls. I m from India. Watch was originally purchased in Australia.
During this process I was prompted for update which I did and now I m stuck with 4.0.0.7 version and no way to change the CSC back to INU using shell access way.
Only way now looks to use the combination firmware and Odin. But not sure where to find the Combination Firmware for SM-R805F LTE version.
Anyone can point me to right direction to get the required binaries ?
Device Details:
AP : R805FXXU1FSL4
CP: R805FXXU1FSL4
CSC: R805FOXX1FSL4
Hello everybody. i am from Greece and today i updated my gw2 to Tizen 5.5.0.1. can i change the csc so i can install the ecg and bp apps? i tried other methods to install ecg and bp app but ecg wont work( hope my sensor is ok). is there any solution?
regards
oranje1021 said:
Hello everybody. i am from Greece and today i updated my gw2 to Tizen 5.5.0.1. can i change the csc so i can install the ecg and bp apps? i tried other methods to install ecg and bp app but ecg wont work( hope my sensor is ok). is there any solution?
regards
Click to expand...
Click to collapse
Yes you.
I changed from XAR to KOO after upgrading to 5.5.0.1
Sent from my SM-N975F using Tapatalk
M.Noury said:
Yes you.
I changed from XAR to KOO after upgrading to 5.5.0.1
Sent from my SM-N975F using Tapatalk
Click to expand...
Click to collapse
how did you do it? did you only pull and push csc file withe the correct csc code? KOO is preffered than XAR usa?
oranje1021 said:
how did you do it? did you only pull and push csc file withe the correct csc code?
Click to expand...
Click to collapse
Flashed combination rom
Pushed the files with update csc code
Flashed 3 files rom
Sent from my SM-N975F using Tapatalk
Yes I moved from XAR 5.5.0.1 to DBT, because I had problem with wifi on XAR.
M.Noury said:
Flashed combination rom
Pushed the files with update csc code
Flashed 3 files rom
Sent from my SM-N975F using Tapatalk
Click to expand...
Click to collapse
i asked you because because i thouth that the roms available are previous than the 5.5.0.1 i am on now.
so if i do this method (How To Change Region On Galaxy Watch Active 2 | How To Get Samsung Pay On Watch Active 2 TechnoProz), i can get the official us 5.5.0.1 and the official ecg and bp apps?
i thank you again for your time.
any ideas? thanks!
oranje1021 said:
any ideas? thanks!
Click to expand...
Click to collapse
+1, same question
It makes sense to differ between LTE crap like SM-R825F and so on...
And BT only crap... SM-R820 blabla...
Because BT only devices are easier to handle... :good: :good:
If you have SM-R820 or SM-R830... and you are on CTI4... you can use also my rooted files... to get ROOT access.
This is the whole magic...
You need ROOT.
This is why we flash Combination Firmware, because ROOT access inside.
CTI4 Root for SM-R820:
https://forum.xda-developers.com/showpost.php?p=83640791&postcount=937
CTI4 Root for SM-R830
https://forum.xda-developers.com/showpost.php?p=83653845&postcount=938
Only as info.
Best Regards
I am having trouble downloading files - antivirus keeps blocking says malware / ransomware any ideas besides disabling antivirus software?
ajb_111 said:
I am having trouble downloading files - antivirus keeps blocking says malware / ransomware any ideas besides disabling antivirus software?
Click to expand...
Click to collapse
Its natural response from your antivirus/antimalware software. After all this is considered for them "hacking tool" nevertheless...our dear friend @adfree wouldn't have any reason to try and infect anyone...for what?? just think his timeless efforts of hard working to get this tool ready for you, FREE of charge to use.....sometimes comments like this leave me speechless...but i think its about time for everyone, to speak freely how they consider appropriate...
This has got lost in interpretation. No comment on adfree or anyone else who I know how much effort they put in and are such great helps to us all. Sorry if this is how it was received. My comment is the frustration of not being able to download because keep getting blocked and cannot turn off because of company policy... Sorry again
adfree said:
It makes sense to differ between LTE crap like SM-R825F and so on...
And BT only crap... SM-R820 blabla...
Because BT only devices are easier to handle... :good: :good:
If you have SM-R820 or SM-R830... and you are on CTI4... you can use also my rooted files... to get ROOT access.
This is the whole magic...
You need ROOT.
This is why we flash Combination Firmware, because ROOT access inside.
CTI4 Root for SM-R820:
https://forum.xda-developers.com/showpost.php?p=83640791&postcount=937
CTI4 Root for SM-R830
https://forum.xda-developers.com/showpost.php?p=83653845&postcount=938
Only as info.
Best Regards
Click to expand...
Click to collapse
Dear friend
Could you please tell me If we some day want to roll back, can we? unroot posable or not? And how?
As you know in the samsung phones root will trip knox and binary changed and even flashing official firmware can not fixed it and we never can use samsung pay or secure folder!
Sorry for bad english
@hamid.seyedani
Warranty Void 0 0x0000 aka Knox untouched.
So Samsung Pay will still work...
Unroot... easiest way IMHO to flash Stock Firmware of your Choice...
Then also FOTA update method enabled again...
Best Regards
Don't want to brick again
l did the following steps to change CSC
thanks @adfree for procedure this part worked ..
Rooted files for SM-R820 CTI4 (Tizen 5.5.0.1)
Round 1.
With netOdin
Combination Firmware RAMDISK from SM-R500 to disable Security checks...
Code:
ramdisk_only_smR500_ASL2_FT40.tar
Round 2.
With netOdin
Code:
2020_October_smR820_CTI4_ROOT_v1.tar
Was successfull thanks @adfree in rooting my device then tried to change CSC as follows:
Afer device restart regularly
Connect watch to wifi and with sdb did the following:
sdb connect
sdb root on
sdb shell
sdb pull /csa/csc/csc-active-customer.inf
sdb pull /csa/imei/prodcode.dat
edit /csa/csc/csc-active-customer.inf and replace csc code (I entered KOO )
edit /csa/imei/prodcode.dat and replace last three characters to csc code you want
sdb push /csa/csc/csc-active-customer.inf
sdb push /csa/imei/prodcode.dat
reboot the device
run netodin again and select AP, BL and CSC to flash stock used stock rom R820XXU1CTI4
In the end watch rebooted instead of csc being KOO Korea csc was Singapore
Watch working fine not bricked second time but wrong csc...https://forum.xda-cdn.com/images/icons/icon9.gif
I think error is did not flash into recovery at two stages at before root stage and after changing csc and when reflashed stock rom am I correct?
Hello All,
I would like to be sure and don't brick my device.
I have BT SM-R820 currenty running R820XXU1CTJ5 with XAR CCS (changed in the past). Getting updates, SPay and ECG working, everything smooth.... except BP with lates updates.
Because of BP was kinda "disabled" for XAR I would like to move to BTU (UK) CCS. What I read about that it should do the trick because XAR is only problematic version.
Is it safe to use any older combination firmware to make the CCS chnage in general? Or it's being checked somehow?
If not is there a way for R820XXU1CTJ5 FW yet?
Thnaks a lot.
welcome.jn said:
Hello All,
I would like to be sure and don't brick my device.
I have BT SM-R820 currenty running R820XXU1CTJ5 with XAR CCS (changed in the past). Getting updates, SPay and ECG working, everything smooth.... except BP with lates updates.
Because of BP was kinda "disabled" for XAR I would like to move to BTU (UK) CCS. What I read about that it should do the trick because XAR is only problematic version.
Is it safe to use any older combination firmware to make the CCS chnage in general? Or it's being checked somehow?
If not is there a way for R820XXU1CTJ5 FW yet?
Thnaks a lot.
Click to expand...
Click to collapse
You can try with COMBINATION-FT40_R820XXU1ATH1 here https://drive.google.com/file/d/1USardEAYBlf3TnnlOapzc8zH3wx0nDxT/view?usp=sharing
Huy.tq said:
You can try with COMBINATION-FT40_R820XXU1ATH1 here https://drive.google.com/file/d/1USardEAYBlf3TnnlOapzc8zH3wx0nDxT/view?usp=sharing
Click to expand...
Click to collapse
Hi,
First of all thanks from you and others that are helping us with these things. Could you please provide me tutorial of something like that how to change CSC using this "COMBINATION-FT40_R820XXU1ATH1" bthw I'm running on active2 R820XXU1CTJ5-XAR CSC i want to change it to use BP monitor.
After I rooted galaxy active 2 updates stop working, samsung pay stop working saying "you made modifications to devices, contact us for help"
How to unroot galaxy active 2? They show numbers while rebooting, after I rooted them. No matter which firmware I flesh, alway that numbers
@forux
In theory I could help you...
But no idea yet what you have... Model Name...
And what your Goal is...
Best Regards
I am trying to have both ECG & BP on my Galaxy Active 2 watch. I have side loaded the BP last June by a tread here (thanks again for that) and yersterday afyer a major update (to Tizen 5.5.0.1) all I could is installing the ECG (which is less important for me) and I can not load the BP.Tpk I keep getting an error from the Tizen Studio Device Manager "Failed to install app. Old version is greater than update request version [ -29] failed. Is there a workaround/solution for that. I really need the BP to work. Even a rollback f the Tizen version is ok.
Many Thanks
I have an Active 2 (no LTE version) R820 and a P30 pro with android 10.
History:
- I changed my CSC to Korea (KOO).
- after full update to tizen 5.5.0.1 (OTA), I tried to install both bp and ecg (thread https://forum.xda-developers.com/sm...3/enable-ecgbp-featur-samsung-phones-t4168567)
- bp refused to install (generic error -1)
- ecg installed, paired with modified Samsung Health Monitor Version 1..1.0.175.Caravana.
- When running, it ask to "rest my finger on back button". Tried everything, nothing happens. After maybe 1 minute it exit (probably a timeout check). In the meantime, the green led is very strong and continuous (no pulsing light).
- I downgrade to Tizen 4.0.0.6 (folowing the steps from changing CSC). Installed both bp and ecg (and yes now bp can be installed, but on 4.0.0.6 it's not running with a message 'system not ready')
- update to 4.0.0.8 (OTA) and now BP works flawlessly. ECG has the same problem; could pair with phone, but not starting measurement.
- update to 5.5.0.1 and the same. BP still working, ECG same problem.
Any advice, please?
Maybe it's a VERY stupid question, but... the semi circular contacts near the green led seems somehow coated. Is that ok?
button contact must be broken
adrianzagar said:
I have an Active 2 (no LTE version) R820 and a P30 pro with android 10.
History:
- I changed my CSC to Korea (KOO).
- after full update to tizen 5.5.0.1 (OTA), I tried to install both bp and ecg (thread https://forum.xda-developers.com/sm...3/enable-ecgbp-featur-samsung-phones-t4168567)
- bp refused to install (generic error -1)
- ecg installed, paired with modified Samsung Health Monitor Version 1..1.0.175.Caravana.
- When running, it ask to "rest my finger on back button". Tried everything, nothing happens. After maybe 1 minute it exit (probably a timeout check). In the meantime, the green led is very strong and continuous (no pulsing light).
- I downgrade to Tizen 4.0.0.6 (folowing the steps from changing CSC). Installed both bp and ecg (and yes now bp can be installed, but on 4.0.0.6 it's not running with a message 'system not ready')
- update to 4.0.0.8 (OTA) and now BP works flawlessly. ECG has the same problem; could pair with phone, but not starting measurement.
- update to 5.5.0.1 and the same. BP still working, ECG same problem.
Any advice, please?
Maybe it's a VERY stupid question, but... the semi circular contacts near the green led seems somehow coated. Is that ok?
Click to expand...
Click to collapse
i have same problem,before i was on ZTO and ecg working great and then make the procedure that u do so i can make BP installed and then ECG not starting measurement.do u find any solution?
pornogeroc said:
i have same problem,before i was on ZTO and ecg working great and then make the procedure that u do so i can make BP installed and then ECG not starting measurement.do u find any solution?
Click to expand...
Click to collapse
No, nothing yet. But now I have some hope that is not a hardware problem.
So, the issue is still open, I am open to any advice!
i have changed again to ZTO region that before is working great but now is not working,i have installed previous samsung health monitor but nothing
pornogeroc said:
i have changed again to ZTO region that before is working great but now is not working,i have installed previous samsung health monitor but nothing
Click to expand...
Click to collapse
Tried again with a friend watch (R820, 4.0.0.8) without changing CSC. Same thing. Ecg is running (and Samsung Heatlh recognize it) but no measurement. So definitely not hardware problem.