Hi, i have a gear watch r800 ITV CSC. In recent days an update has been released with the 4.0.0.7 system. I had the 4.0.0.6 system and I changed the CSC setting to XAR. I got the new update but now the command launch_app csc-manager.csc-pre-configuration not work. Sdb find the wear and I can navigate with sub shell but when I send the command I have the following message: launch_app csc-manager.csc-pre-configuration ... successfully launched but in the gear not appear nothing.
Have solution?I have tried various versions of sdb.
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Look into this thread...
Maybe similar way work with SM-R800... SM-R810...
Combination Firmware for SM-R800 is for instance here:
https://forum.xda-developers.com/showpost.php?p=80895699&postcount=5
Be carefully... UNTESTED aaand:
At your own risk!
Best Regards
adfree said:
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Look into this thread...
Maybe similar way work with SM-R800... SM-R810...
Combination Firmware for SM-R800 is for instance here:
https://forum.xda-developers.com/showpost.php?p=80895699&postcount=5
Be carefully... UNTESTED aaand:
At your own risk!
Best Regards
Click to expand...
Click to collapse
this method downgrade my gear?
mago988 said:
this method downgrade my gear?
Click to expand...
Click to collapse
I'm also curious how to change CSC on 4.0.0.7
works like a charm with Samsung pay!!!!:good:
I changed my CSC to Australia to get the Samsung Pay but this disabled VoLTE on my watch. I m now not able to call or receive any calls. I m from India. Watch was originally purchased in Australia.
During this process I was prompted for update which I did and now I m stuck with 4.0.0.7 version and no way to change the CSC back to INU using shell access way.
Only way now looks to use the combination firmware and Odin. But not sure where to find the Combination Firmware for SM-R805F LTE version.
Anyone can point me to right direction to get the required binaries ?
Device Details:
AP : R805FXXU1FSL4
CP: R805FXXU1FSL4
CSC: R805FOXX1FSL4
Hello everybody. i am from Greece and today i updated my gw2 to Tizen 5.5.0.1. can i change the csc so i can install the ecg and bp apps? i tried other methods to install ecg and bp app but ecg wont work( hope my sensor is ok). is there any solution?
regards
oranje1021 said:
Hello everybody. i am from Greece and today i updated my gw2 to Tizen 5.5.0.1. can i change the csc so i can install the ecg and bp apps? i tried other methods to install ecg and bp app but ecg wont work( hope my sensor is ok). is there any solution?
regards
Click to expand...
Click to collapse
Yes you.
I changed from XAR to KOO after upgrading to 5.5.0.1
Sent from my SM-N975F using Tapatalk
M.Noury said:
Yes you.
I changed from XAR to KOO after upgrading to 5.5.0.1
Sent from my SM-N975F using Tapatalk
Click to expand...
Click to collapse
how did you do it? did you only pull and push csc file withe the correct csc code? KOO is preffered than XAR usa?
oranje1021 said:
how did you do it? did you only pull and push csc file withe the correct csc code?
Click to expand...
Click to collapse
Flashed combination rom
Pushed the files with update csc code
Flashed 3 files rom
Sent from my SM-N975F using Tapatalk
Yes I moved from XAR 5.5.0.1 to DBT, because I had problem with wifi on XAR.
M.Noury said:
Flashed combination rom
Pushed the files with update csc code
Flashed 3 files rom
Sent from my SM-N975F using Tapatalk
Click to expand...
Click to collapse
i asked you because because i thouth that the roms available are previous than the 5.5.0.1 i am on now.
so if i do this method (How To Change Region On Galaxy Watch Active 2 | How To Get Samsung Pay On Watch Active 2 TechnoProz), i can get the official us 5.5.0.1 and the official ecg and bp apps?
i thank you again for your time.
any ideas? thanks!
oranje1021 said:
any ideas? thanks!
Click to expand...
Click to collapse
+1, same question
It makes sense to differ between LTE crap like SM-R825F and so on...
And BT only crap... SM-R820 blabla...
Because BT only devices are easier to handle... :good: :good:
If you have SM-R820 or SM-R830... and you are on CTI4... you can use also my rooted files... to get ROOT access.
This is the whole magic...
You need ROOT.
This is why we flash Combination Firmware, because ROOT access inside.
CTI4 Root for SM-R820:
https://forum.xda-developers.com/showpost.php?p=83640791&postcount=937
CTI4 Root for SM-R830
https://forum.xda-developers.com/showpost.php?p=83653845&postcount=938
Only as info.
Best Regards
I am having trouble downloading files - antivirus keeps blocking says malware / ransomware any ideas besides disabling antivirus software?
ajb_111 said:
I am having trouble downloading files - antivirus keeps blocking says malware / ransomware any ideas besides disabling antivirus software?
Click to expand...
Click to collapse
Its natural response from your antivirus/antimalware software. After all this is considered for them "hacking tool" nevertheless...our dear friend @adfree wouldn't have any reason to try and infect anyone...for what?? just think his timeless efforts of hard working to get this tool ready for you, FREE of charge to use.....sometimes comments like this leave me speechless...but i think its about time for everyone, to speak freely how they consider appropriate...
This has got lost in interpretation. No comment on adfree or anyone else who I know how much effort they put in and are such great helps to us all. Sorry if this is how it was received. My comment is the frustration of not being able to download because keep getting blocked and cannot turn off because of company policy... Sorry again
adfree said:
It makes sense to differ between LTE crap like SM-R825F and so on...
And BT only crap... SM-R820 blabla...
Because BT only devices are easier to handle... :good: :good:
If you have SM-R820 or SM-R830... and you are on CTI4... you can use also my rooted files... to get ROOT access.
This is the whole magic...
You need ROOT.
This is why we flash Combination Firmware, because ROOT access inside.
CTI4 Root for SM-R820:
https://forum.xda-developers.com/showpost.php?p=83640791&postcount=937
CTI4 Root for SM-R830
https://forum.xda-developers.com/showpost.php?p=83653845&postcount=938
Only as info.
Best Regards
Click to expand...
Click to collapse
Dear friend
Could you please tell me If we some day want to roll back, can we? unroot posable or not? And how?
As you know in the samsung phones root will trip knox and binary changed and even flashing official firmware can not fixed it and we never can use samsung pay or secure folder!
Sorry for bad english
@hamid.seyedani
Warranty Void 0 0x0000 aka Knox untouched.
So Samsung Pay will still work...
Unroot... easiest way IMHO to flash Stock Firmware of your Choice...
Then also FOTA update method enabled again...
Best Regards
Don't want to brick again
l did the following steps to change CSC
thanks @adfree for procedure this part worked ..
Rooted files for SM-R820 CTI4 (Tizen 5.5.0.1)
Round 1.
With netOdin
Combination Firmware RAMDISK from SM-R500 to disable Security checks...
Code:
ramdisk_only_smR500_ASL2_FT40.tar
Round 2.
With netOdin
Code:
2020_October_smR820_CTI4_ROOT_v1.tar
Was successfull thanks @adfree in rooting my device then tried to change CSC as follows:
Afer device restart regularly
Connect watch to wifi and with sdb did the following:
sdb connect
sdb root on
sdb shell
sdb pull /csa/csc/csc-active-customer.inf
sdb pull /csa/imei/prodcode.dat
edit /csa/csc/csc-active-customer.inf and replace csc code (I entered KOO )
edit /csa/imei/prodcode.dat and replace last three characters to csc code you want
sdb push /csa/csc/csc-active-customer.inf
sdb push /csa/imei/prodcode.dat
reboot the device
run netodin again and select AP, BL and CSC to flash stock used stock rom R820XXU1CTI4
In the end watch rebooted instead of csc being KOO Korea csc was Singapore
Watch working fine not bricked second time but wrong csc...https://forum.xda-cdn.com/images/icons/icon9.gif
I think error is did not flash into recovery at two stages at before root stage and after changing csc and when reflashed stock rom am I correct?
Hello All,
I would like to be sure and don't brick my device.
I have BT SM-R820 currenty running R820XXU1CTJ5 with XAR CCS (changed in the past). Getting updates, SPay and ECG working, everything smooth.... except BP with lates updates.
Because of BP was kinda "disabled" for XAR I would like to move to BTU (UK) CCS. What I read about that it should do the trick because XAR is only problematic version.
Is it safe to use any older combination firmware to make the CCS chnage in general? Or it's being checked somehow?
If not is there a way for R820XXU1CTJ5 FW yet?
Thnaks a lot.
welcome.jn said:
Hello All,
I would like to be sure and don't brick my device.
I have BT SM-R820 currenty running R820XXU1CTJ5 with XAR CCS (changed in the past). Getting updates, SPay and ECG working, everything smooth.... except BP with lates updates.
Because of BP was kinda "disabled" for XAR I would like to move to BTU (UK) CCS. What I read about that it should do the trick because XAR is only problematic version.
Is it safe to use any older combination firmware to make the CCS chnage in general? Or it's being checked somehow?
If not is there a way for R820XXU1CTJ5 FW yet?
Thnaks a lot.
Click to expand...
Click to collapse
You can try with COMBINATION-FT40_R820XXU1ATH1 here https://drive.google.com/file/d/1USardEAYBlf3TnnlOapzc8zH3wx0nDxT/view?usp=sharing
Huy.tq said:
You can try with COMBINATION-FT40_R820XXU1ATH1 here https://drive.google.com/file/d/1USardEAYBlf3TnnlOapzc8zH3wx0nDxT/view?usp=sharing
Click to expand...
Click to collapse
Hi,
First of all thanks from you and others that are helping us with these things. Could you please provide me tutorial of something like that how to change CSC using this "COMBINATION-FT40_R820XXU1ATH1" bthw I'm running on active2 R820XXU1CTJ5-XAR CSC i want to change it to use BP monitor.
After I rooted galaxy active 2 updates stop working, samsung pay stop working saying "you made modifications to devices, contact us for help"
How to unroot galaxy active 2? They show numbers while rebooting, after I rooted them. No matter which firmware I flesh, alway that numbers
@forux
In theory I could help you...
But no idea yet what you have... Model Name...
And what your Goal is...
Best Regards
I'm using GWA2 with LG V50 in South Korea. I found out that it's possible to use ECG and BP function on non-Samsung device by installing tpk through SDB. I tried it but it said General error [-1] on both 23.tpk and BP.tpk. I already tried reset my watch but it still doesn't work and keep saying same error code. Is there anyone who knows the solution?
You can't install Space Shuttle parts onto a chinese bicycle.
hklee28 said:
I'm using GWA2 with LG V50 in South Korea. I found out that it's possible to use ECG and BP function on non-Samsung device by installing tpk through SDB. I tried it but it said General error [-1] on both 23.tpk and BP.tpk. I already tried reset my watch but it still doesn't work and keep saying same error code. Is there anyone who knows the solution?
Click to expand...
Click to collapse
You can try with this for non samsung phone https://forum.xda-developers.com/sm...3/enable-ecgbp-featur-samsung-phones-t4168567
I am trying to have both ECG & BP on my Galaxy Active 2 watch. I have side loaded the BP last June by a tread here (thanks again for that) and yersterday afyer a major update (to Tizen 5.5.0.1) all I could is installing the ECG (which is less important for me) and I can not load the BP.Tpk I keep getting an error from the Tizen Studio Device Manager "Failed to install app. Old version is greater than update request version [ -29] failed. Is there a workaround/solution for that. I really need the BP to work. Even a rollback f the Tizen version is ok.
Many Thanks
I'm relatively new to the watch. I have the ECG but no BP monitor.
When I try to sideload 23.tpk or bp.tpk I get the error that says the old version is newer than the update version.
SM-R830
Tizen 5.5.0.1
Just realized it's because I'm on 5.5.0.1
I don't see a way to close this