Develop Bugs

Which screen protector to get?

I'm looking for a new screen protector for my 3T. Here's my requirements:
Tempered glass
Doesn't let dust get under it over time
Doesn't keep me from seeing pixels along the edges (rules out OnePlus 3/3T Curved Tempered Glass Screen Protector; see https://youtu.be/rVtWOmDrVGU?t=119)
Covers up the entire display area (rules out OnePlus 3/3T Tempered Glass Screen Protector; see my attached photo)
Works with at least one of the big protective cases like Otterbox Case for OnePlus 3/3T, Spigen Neo Hybrid OnePlus 3 Case / OnePlus 3T Case with Flexible Inner Protection and Reinforced Hard Bumper Frame for OnePlus 3 2016 - Gunmetal, or OnePlus 3T / OnePlus 3 Case, TUDIA Slim-Fit HEAVY DUTY [MERGE] EXTREME Protection / Rugged but Slim Dual Layer Case for OnePlus 3T, OnePlus 3 (Matte Black)
Are there any screen protectors that meet all of these criteria?

the unicorn..gl

Doesn't exist.. that I've seen.

Sigh... Why did OnePlus have to curve the screen? :crying:

Yeah,there's no good tempered glass protector. The only option is a plastic protector.

B3501 said:
Yeah,there's no good tempered glass protector. The only option is a plastic protector.
Click to expand...
Click to collapse
Yeah, it's looking that way. I really don't want to go that route because plastic has next to no impact protection.

I have the Orzly tempered glass protector, no issues here... Recommend it

dsdavis6 said:
I have the Orzly tempered glass protector, no issues here... Recommend it
Click to expand...
Click to collapse
It comes off eventually,you get the rainbow effect and dust eventually gets underneath it as it only sticks to the edges.

I bought a couple of cheap ones off eBay that go around the home button and speaker. Don't even notice it's on most of the time. I get a little oil spill type effect but that's only when the screens off and not noticeable unless I look for it. Think the key is getting it really stuck down. When I first put it on I ended up with tobacco underneath it from my pocket but carefully took it off and reapplied it and so far it's been fine. Had it on about 2 months maybe 6 weeks and it's been great

I'm having the same issue as you. I'm not sure which tempered glass screen protector to use..
After a little search, it seems like the issue with the official curved screen protector from OnePlus has been fixed. I'm gonna bite the bullet and just go for that once, since it's "official". Will report back with images.

exb0 said:
After a little search, it seems like the issue with the official curved screen protector from OnePlus has been fixed.
Click to expand...
Click to collapse
Where'd you see that? I'm under the impression that they said they were going to fix it, but all they ended up doing was adding a disclaimer about the problem to the description page.

Hey everyone,
I bought the curved tempered glass and it was so so so bad I removed it 1 minute after using it.
When you put your finger on the fingerprint sensor, I get the feeling that i'm putting my finger into a hole.
The feeling I get when I look at the screen, its the same as if my phone was outside a window...
It was expensive and I'm not using it. Tried to refund it and the support didnt allowed it.
The curved tempered glass does protect the whole phone into a point that it kills the whole feeling you get when
the phone is naked.
Please do not buy it!
I bought recently the normal tempered glass but I still didnt received it.
When it arrives I'll give some news.

I received these today and applied the first one perfectly. I can't tell there is anything on the screen. They do not attract smudges anymore than the phone's glass which is good.
I am more so trying to protect against micro scratches so do not necessarily need the better protection of glass.
OnePlus 3 / OnePlus 3T Screen Protectors, Multi-Pack of 5 Orzly Transparent Screen Guards Sheets for the ONE PLUS THREE SmartPhone (Original 2016 Mode https://www.amazon.com/dp/B01H7BTSM0/ref=cm_sw_r_cp_apap_8PbcRUUQS3tVw
Sent from my ONEPLUS A3000 using Tapatalk

Using the orzly v2 glass and its cool. Yes you can see the dot matrix in direct sunlight, yes you get random rainbow in in hot/humid places. But overall its usually clear and perfect. If you use a case it just blends in and although the extra height is daunting on the home button at first, after a month I can say I can't even tell anymore, not obtrusive at all.

Experience with official tempered glass protector
So just to share my experience with the official curved tempered glass protector from oneplus after using it for some weeks.
I'm using it with the Otterbox case and it does work well together overall. It did happen very rarely that an edge was pushed off by the case when the phone was in my pocket. The visibility of the edges of the screen is impaired, but not to the point that I find it disturbing in every day usage.
So my point is, overall this combination works well and provides good protection while adding reasonable bulk. I think it's a very solid choice as of now.

dsdavis6 said:
I have the Orzly tempered glass protector, no issues here... Recommend it
Click to expand...
Click to collapse
Yup, quite happy with that. But I'm not 100% persuaded that's actually tempered glass. I managed to get it chipped just by holding it in my pocket with some coins (I assume, as I never dropped it). Nothing major, but never happened with any other glass screen protector before. So, guess that's still going to provide some level of protection but wouldn't trust it too much for major protection.
Apart from that, that's ok for the price.
IMHO

Has anyone tried:
https://www.ultimateshield.co.uk/collections/oneplus-3t-3

SlyUK said:
Has anyone tried:
https://www.ultimateshield.co.uk/collections/oneplus-3t-3
Click to expand...
Click to collapse
It seems to have the same problem as the official OnePlus full-coverage protector where you lose some edge pixels, according to the 3-star review on the white model.

I'm on my 2nd Orzly V2 now and it's not too bad. I have limited rainbow affect which is only visible under fluorescent lights and the touch sensitivity is generally OK. It's not great by any means but it's adequate, will protect the screen and is the best out of a poor lot.

Make by my self based on polyurethane film

Tempered Glass Screen Protectors

Bought a tempered glass last night (link below, along with image), and it adhered perfectly, and looks amazing.
Moto G5 Plus Screen Protector, Yootech [2-Pack] Moto G5 Plus Tempered Glass Screen Protector [ANTI-SCRATCH] [BUBBLE-FREE][ULTRA-CLEAR] for Motorola Moto G plus 5th Generation https://www.amazon.com/dp/B06XMY75GX/ref=cm_sw_r_cp_apa_o8g4ybG5GRYKJ

The speaker cutout at the top is wider than needed. Doesn't cover proximity sensor and looks asymmetric.
How did you put it by yourself without any air bubbles?

No matter what brand of tempered glass you buy for the G5, on Amazon or anywhere else, they all have the same size top cutout. The proximity sensor is not going to get damaged with how thin the opening is.
As for the bubbles, if you follow the directions included with any of the tempered glass these days, you should never have bubbles, otherwise, you did it wrong. Very easy to install without any bubbles.

Not necessarily. A badly made tempered glass brand will have sub par results, even with a perfect install. I'm coming from a phone with a slightly curved edge, where it was trial and error to find a good one. Thank goodness the Moto G5 plus has a flat screen <3.

I've used some "tempered glass" screen protectors that were good, but the most recent one I got for my Oneplus One seemed like really cheap glass that chips much easier (even just from hitting other stuff in my pocket like keys).
Now I've got a Moto G5 Plus on the way and I want to find out which of these dozen different brands of "9H Hardness" screen protectors are the best quality/durable - and, if the once that claim "oleophobic anti-fingerprint coating" actually work well?
I'm guessing some of the protectors actually have a good coating and some just said "let's write that so they sell better" even if they don't.

Has anyone used the fingerprint sensor one-button nav with a tempered glass screen protector on? Does it interfere in any way or make it more difficult to register proper swipes?

batters13 said:
Has anyone used the fingerprint sensor one-button nav with a tempered glass screen protector on? Does it interfere in any way or make it more difficult to register proper swipes?
Click to expand...
Click to collapse
I haven't had any issues with mine at all

batters13 said:
Has anyone used the fingerprint sensor one-button nav with a tempered glass screen protector on? Does it interfere in any way or make it more difficult to register proper swipes?
Click to expand...
Click to collapse
I got this one: http://a.co/4TGZKPS
I've had no problem with the finger print scanner or one button navigation. I even found one button nav easier since the home button is more recessed.
It went on perfectly with no bubbles and seems to have a good oleophobic coating.

paoloroeseke said:
Bought a tempered glass last night (link below, along with image), and it adhered perfectly, and looks amazing.
Moto G5 Plus Screen Protector, Yootech [2-Pack] Moto G5 Plus Tempered Glass Screen Protector [ANTI-SCRATCH] [BUBBLE-FREE][ULTRA-CLEAR] for Motorola Moto G plus 5th Generation https://www.amazon.com/dp/B06XMY75GX/ref=cm_sw_r_cp_apa_o8g4ybG5GRYKJ
Click to expand...
Click to collapse
I picked up the same tempered glass off your recommendation. It looks great and was easy to install. Thanks for sharing. I looked at a few others and think the Yootech was a smart choice.

Picked up the op's protector as well. It's a little annoying that the holes don't perfectly line up, but it went on without a hitch and works well.

Is this good?
I ordered it (Cash on Delivery so I can always cancel)
https://www.flipkart.com/crook-temp...glass/p/itmerweyynnqvv7g?pid=ACCERWEYSGTPAZEC

I picked up a 3 pack by Mr. Shield. The only complaint I have is the glass doesn't quite extend all the way to the edges, I don't mind the oversized speaker and camera cutout's

Nuglass screen protectors are available for Moto G5 Plus. I have found them to have an excellent fit and are resistant to finger prints.
Sent from my SM-G900I using Tapatalk

yourSAS said:
The speaker cutout at the top is wider than needed. Doesn't cover proximity sensor and looks asymmetric.
How did you put it by yourself without any air bubbles?
Click to expand...
Click to collapse
Use the bathroom method... Turn on hot water in shower for about 3 to 5 min to get it steamy in there. Turn off water and let the steam settle the dust out of the air. Then apply the protector.

critofur said:
I've used some "tempered glass" screen protectors that were good, but the most recent one I got for my Oneplus One seemed like really cheap glass that chips much easier (even just from hitting other stuff in my pocket like keys).
Now I've got a Moto G5 Plus on the way and I want to find out which of these dozen different brands of "9H Hardness" screen protectors are the best quality/durable - and, if the once that claim "oleophobic anti-fingerprint coating" actually work well?
I'm guessing some of the protectors actually have a good coating and some just said "let's write that so they sell better" even if they don't.
Click to expand...
Click to collapse
I'm not sure if you're aware, but 9H hardness only refers to scratch hardness and doesn't mean it will be chip or crack resistance.

I have gone through 3 different brand "tempered glass" protectors from ebay and not one has fit properly or stayed on. Even those that said 2.5d... I used to have a galaxy alpha and the first 3$ TG protector I bought from ebay worked flawlessly... Is it because it's still a fairly new phone?

I just wish the protectors fit the speaker better. Everyone single one on Amazon seems to fit slightly off

You should definitely go for Orzly Tempered Glass. I've used this brand's glass on my moto G2 and the protection was perfect. It was not too thick, so I was able to use a TPU case and have the glass installed as well.

KamiCartier said:
I just wish the protectors fit the speaker better. Everyone single one on Amazon seems to fit slightly off
Click to expand...
Click to collapse
If you're talking about the cutout for it being a little wider on the left, that is for a sensor. If you hold the phone up to the light, you can see the sensor there.

jrc2 said:
If you're talking about the cutout for it being a little wider on the left, that is for a sensor. If you hold the phone up to the light, you can see the sensor there.
Click to expand...
Click to collapse
Okay now I see it. It just seems like wasted space because the sensor blends in really well.

What screen protector doesn't suck?

These new tempered glass protectors with the black surround adhesive are terrible. Poor touch sensitivity and a weird hollow feel/sound because they don't actually sit flat on the screen. Are there any non-adhesive tempered glass protectors that are worth looking into? Amazon reviews are spotty. for every brand and every type of protector for the G8.

Alexsha said:
These new tempered glass protectors with the black surround adhesive are terrible. Poor touch sensitivity and a weird hollow feel/sound because they don't actually sit flat on the screen. Are there any non-adhesive tempered glass protectors that are worth looking into? Amazon reviews are spotty. for every brand and every type of protector for the G8.
Click to expand...
Click to collapse
I use these no real complaints GPEL Screen Protector for LG G8... https://www.amazon.com/dp/B07QHF8BSV?ref=ppx_pop_mob_ap_share

caligood3 said:
I use these no real complaints GPEL Screen Protector for LG G8... https://www.amazon.com/dp/B07QHF8BSV?ref=ppx_pop_mob_ap_share
Click to expand...
Click to collapse
Sticky surround and leaves an air gap between the screen and protector. Also, 50% of the reviews are poor.

Alexsha said:
Sticky surround and leaves an air gap between the screen and protector. Also, 50% of the reviews are poor.
Click to expand...
Click to collapse
I'm using it right now & it's fine with a case but whatever

caligood3 said:
I'm using it right now & it's fine with a case but whatever
Click to expand...
Click to collapse
The air gap doesn't annoy you? And the loss of touch sensitivity?

Alexsha said:
The air gap doesn't annoy you? And the loss of touch sensitivity?
Click to expand...
Click to collapse
I don't notice it it's pretty close to the screen if you ask me & screen sensitivity is about 98% also our g8's have a feature to increase screen sensitivity when using a screen protector idk if you knew that

caligood3 said:
I don't notice it it's pretty close to the screen if you ask me & screen sensitivity is about 98% also our g8's have a feature to increase screen sensitivity when using a screen protector idk if you knew that
Click to expand...
Click to collapse
Tried that and it still doesn't feel right.
I'm thinking of trying a film protector like Ringke. I've also got all these on the way:
https://www.amazon.com/gp/product/B07QSPLMPG
https://www.amazon.com/gp/product/B07Q1HZCXN
https://www.amazon.com/gp/product/B07SDM2JX7

Alexsha said:
Tried that and it still doesn't feel right.
I'm thinking of trying a film protector like Ringke. I've also got all these on the way:
https://www.amazon.com/gp/product/B07QSPLMPG
https://www.amazon.com/gp/product/B07Q1HZCXN
https://www.amazon.com/gp/product/B07SDM2JX7
Click to expand...
Click to collapse
Post how they turn out maybe I'll try them in the future

Tried this 32nd Extra Armoured Tempered Glass Screen Protector which is equivalent to the GPEL and seems to be alright but the adhesive isn't great I managed to move the screen protector out of position by a little force. Probably may to consider ones with full adhesive...

amFilm protector
Used these on my wifes pixel 2 and they are great. You get a free one if it breaks.
My new g8 has one. it comes with a jig to be sure it lines up perfect. curves on the edges and extremely good fit. No issue with the case.
https://www.amazon.com/gp/product/B07QDVJNR2/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

FJ40dan said:
Used these on my wifes pixel 2 and they are great. You get a free one if it breaks.
My new g8 has one. it comes with a jig to be sure it lines up perfect. curves on the edges and extremely good fit. No issue with the case.
https://www.amazon.com/gp/product/B07QDVJNR2/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Gonna try after I run through my 2 gpels lol just put one on should be good unless I drop it awkwardly then it's on to the 2nd one

Using the LK film protector I linked earlier. Goes on like the ringke film, using multiple steps and doing 1/2 at a time. Feel is good. A little stickier than a tempered glass protector, but it's solid on the screen. No air gap. I think it might be interfering with the crystal sound display a bit. Volume seems a little lower now.

Alexsha said:
Using the LK film protector I linked earlier. Goes on like the ringke film, using multiple steps and doing 1/2 at a time. Feel is good. A little stickier than a tempered glass protector, but it's solid on the screen. No air gap. I think it might be interfering with the crystal sound display a bit. Volume seems a little lower now.
Click to expand...
Click to collapse
I have several of the Ringke stocked up, they have a great installation process. I personally enjoy the film (dry application) protectors more than glass as they have a much slimmer profile. The downside is that they offer little impact protection and can be imprinted, but they're cheap enough that I just keep a few around and change them as needed.

This was the only full-adhesive glass protector I could find. DON'T buy it! I left pics in my Amazon review showing why: Our screen glass curves before the pixels end. The only way to have a flat piece of glass stick to the whole screen is to cut it smaller than the visible screen edges. This one hangs off the sides by 3mm, rendering the edges useless.
[2 Pack] LG G8 ThinQ Screen... https://www.amazon.com/dp/B07NZZ6YGY?ref=ppx_pop_mob_ap_share
I've just ordered the only one I could find that claims to be smaller than the screen area, but the description still makes it a bit tough to know what to expect.
https://www.amazon.com/Compatible-Protector-Coverage-Tempered-Adhesive/dp/B07QJ41M2H
Update: DON'T BUY THESE. This one is even worse, as it's way too tall. Again, the scroll bars don't work because you can't touch them. Total trash.
Unfortunately, unless they make one with genuinely curved glass that follows the screen, there won't be a useful full-adhesive protector for our phone. It looks like every glass protector is flat. They advertise rounded edges, but are still flat glass. If you don't believe me, please look at the pictures I've left in the Amazon reviews. These should never have been made.

Tempered glass is used to protect the screen from scratches and also Protect direct damage of the screen. any branded Tempered Glass is famous with their Hard surface and smooth working. I always prefer Casper Tempered Glass and Whitestone dome Glass.

Add this one to the list of screen protectors that don't work. It won't lay flat on the sides. Long air gaps up/down both sides.
Here's the item description on Amazon. I can't post links yet.
J&D Compatible for 3-Pack LG G8 ThinQ/LG G8 Glass Screen Protector, [Tempered Glass] [Not Full Coverage] Ballistic Glass Screen Protector for LG G8, LG G8 ThinQ Screen Protector - Not for LG G8S ThinQ
by J&D

Full Body Skin
You may want to think about giving the Skinomi Full Body Skin a try. I wouldn't say that it feels as smooth as a glass protector, but it does wonders at protecting the back of the phone. It also keeps it from slipping off of surfaces and easier to hold! Very nice for those times when you don't want to wear a case. The back protector doesn't interfere with any cases, and the front protector covers the entire screen of the device. Skinomi's warranty is pretty legit too.
I've used it on my Nexus 4, v30 and now the G8.

I'm using an AILUN screen protector with a SPIGEN TOUGH ARMOUR case and they fit and work perfectly together. Got them both off EBay.

I was wondering if screen protectors might dull the sound, since the screen itself is a speaker.

I just placed the wet install IQ Shield on my new G8. I haven't even turned it on yet as I'm in a contract on a stupid Note 9,but I like them on my last 4 devices.

Screen Protectors - UK

So what's everyone planning on getting or using?
I'm not a fan of tempered glass, so I still tend to rock the film ones.
Have been using the Ringke Dual Easy Film on my S10e, and they're perfect, however they're not yet available for the Pixel 5 (They are coming though!)
Grabbed myself some of the Atfolix ones https://www.amazon.co.uk/gp/product/B08KLV9P1W/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1, again, used these in the past on the Pixel 2 (I think it was) similar to the Ringke, just a different type of installation method.

Is it wet install film protector?
Had wet on my last phone and nothing beats it

y2grae said:
Is it wet install film protector?
Had wet on my last phone and nothing beats it
Click to expand...
Click to collapse
No it's not the wet installs

I'm in the same boat. I've never had a tempered glass screen protector that I liked. I picked up this since it was the only non-glass one I could find. Hopefully it doesn't suck.

Gibsonflyingv said:
I'm in the same boat. I've never had a tempered glass screen protector that I liked. I picked up this since it was the only non-glass one I could find. Hopefully it doesn't suck.
Click to expand...
Click to collapse
Let me know what they're like!
Ringke dual easy film are out on Amazon, however, it's the wings version, which wraps around the side of the phone. :/

I've just ordered a 'Brotect' screen protector having previously had a positive experience on Nokia 8, will report back.

Man i can't seem to find any good screen protectors on amazon, all those already there are either not available before November (though it already has comments...) Or doesn't fit... Didn't check on other websites though (Fr here).

I too ordered a brotect airglass screen protector, 3 pack for £8.19.
Previously I had purchased one off amazon that I returned as the punch hole cutout would not align - most of the ones on amazon have the same issue of alignment based on the odd reviews coming in. I hope brotect will be good as it's made in Germany.

Screen Protector
I just fitted my Supcase Unicorn Beetle case w/ built in screen protector - it is amazing, makes my P5 feel much better in my giant hands.
if I didnt get this i'd wait for the spigen Glas-T, they fit like a glove and work well on their own or with their cases (liquid air is on order as a backup)

kinny314 said:
I just fitted my Supcase Unicorn Beetle case w/ built in screen protector - it is amazing, makes my P5 feel much better in my giant hands.
if I didnt get this i'd wait for the spigen Glas-T, they fit like a glove and work well on their own or with their cases (liquid air is on order as a backup)
Click to expand...
Click to collapse
Can you post a pic?

Pics
y2grae said:
Can you post a pic?
Click to expand...
Click to collapse
https://ibb.co/M5vDrRz
https://ibb.co/cbXRDGF
https://ibb.co/1LNVN0w
https://ibb.co/qy8Dqx8

Looks a little bulky
How is the screen protector?
Laughing at the speaker holes when it's under the screen

a naked Pixel is just too dainty for my hands, protector is nice and responsive.

I can recommend the Brotect air glass screen protector. Precise width (which has led to me having half a mm uncovered on the right as it's the same amount over on the left...) but very easy application and looks great. Fits fine with a Spigen case.

TonySpoons said:
I can recommend the Brotect air glass screen protector. Precise width (which has led to me having half a mm uncovered on the right as it's the same amount over on the left...) but very easy application and looks great. Fits fine with a Spigen case.
Click to expand...
Click to collapse
Are you talking about this one?
https://www.amazon.co.uk/brotect-Protector-compatible-Resistant-AirGlass-Clear/dp/B08KS88SDT/ref=sr_1_9?dchild=1&keywords=brotect+pixel+5&qid=1603365855&sr=8-9
Does it come with a cutout for the camera as shown in the picture on amazon?

bilalmwirk said:
Are you talking about this one?
https://www.amazon.co.uk/brotect-Protector-compatible-Resistant-AirGlass-Clear/dp/B08KS88SDT/ref=sr_1_9?dchild=1&keywords=brotect+pixel+5&qid=1603365855&sr=8-9
Does it come with a cutout for the camera as shown in the picture on amazon?
Click to expand...
Click to collapse
I ordered mine from here but it looks like the same one. Yes it has that style of cutout.

Avoid the AtFolix range. I've used them before and theyre usually fine, these are another level of poor!
https://imgur.com/a/KyGb30W
Ordered a pack of the Media Devil Protectors - Hopefully these will be better!

I have applied the brotect screen protector. If you apply it properly (my second attempt) then you can cover the entire screen. First time using it but on appearance it does not seem like glass at all, looks more plastic so cannot comment on the durability. But it is very thin and looks great.
Only the top left camera portion is unprotected as there is no punch hole but rather a corner cut out in the protector

I have the LK tempered glass. It is not bad at all. A bit small for my liking. It covers all of the screen though. Has a cut out and sticks well. Tempered glass is going to
be interesting for this phone as I think they will all look very narrow and short. While the screen is flat the gloss border curves away and you have to choose where protection ends. My personal preference might be for film this time but will see. This is fine for now. I had a Zagg protector ordered from them but it got cancelled. Frustrating.

Puzzling why the Supcase has 2 extra holes on the top of the protector in the middle... very weird.

Tempered glass screen protector (size)

I've had 2 different screen protectors now from differing suppliers on eBay.
The protectors themselves I'm happy with, but both are probably at least 5mm too small (height and width), although they are advertised as for the Pixel 5.
Eg. If I line the protector up pretty much to the top of the screen, then the bottom will line up where the swipe up white line is at the bottom of the screen, so at least 5 or 6mm short in my opinion.
Is anyone else on here using a tempered glass protector, and how are you finding the fit?
Can anyone recommend one that actually covers more of the screen?
Cheers

I have the spigen alignmaster for a day now and it fits nearly perfect, just about 0,5mm too small in every direction

Way back in October i bought a set of screen protectors for my Pixel 5 and all 3 in the pack ended up in the bin. Bubbles galore and badly aligned camera cut outs.
Yesterday i fitted a Spigen one and it went on perfect with the protector fitting up to the start of the bezels , very happy with it indeed.

Hope the spigen protectors will come back in stock

saturday_night said:
I have the spigen alignmaster for a day now and it fits nearly perfect, just about 0,5mm too small in every direction
Click to expand...
Click to collapse
Do you have any pics to show what it looks like? I have a cheap Amazon glass screen protector which has around a 2mm gap around which I'm happy with. If the Spigen covers more of the screen I will get that instead.
Looking at the pictures though it seems the Spigen doesn't have a selfie camera cutout? It seems if the selfie camera is covered it has a pretty big impact on the quality of the pics.
Edit: Actually looking at some Youtube videos, it covers only the display part and not the bezel, like most of the screen protectors so I'll be sticking with mine.

Biggenz said:
Do you have any pics to show what it looks like? I have a cheap Amazon glass screen protector which has around a 2mm gap around which I'm happy with. If the Spigen covers more of the screen I will get that instead.
Looking at the pictures though it seems the Spigen doesn't have a selfie camera cutout? It seems if the selfie camera is covered it has a pretty big impact on the quality of the pics.
Edit: Actually looking at some Youtube videos, it covers only the display part and not the bezel, like most of the screen protectors so I'll be sticking with mine.
Click to expand...
Click to collapse
I took some outstanding selfies with the Spigen protector on yesterday, it doesn't affect the quality.
Also, having come from a protector with a cutout, I prefer it being covered because now there isn't a dust trap around the camera due to the protector edge.

Biggenz said:
Do you have any pics to show what it looks like? I have a cheap Amazon glass screen protector which has around a 2mm gap around which I'm happy with. If the Spigen covers more of the screen I will get that instead.
Looking at the pictures though it seems the Spigen doesn't have a selfie camera cutout? It seems if the selfie camera is covered it has a pretty big impact on the quality of the pics.
Edit: Actually looking at some Youtube videos, it covers only the display part and not the bezel, like most of the screen protectors so I'll be sticking with mine.
Click to expand...
Click to collapse
The bezel has a slight curve though so the screen protector would be lifted up and you wouldn't get a perfect seal.
I'm with Stringy on the cut out as well it is better not to have one, the ones i tried did not sit perfectly around the camera, they were always slightly off centre and it quickly trapped dust.

Hello, very bad sound in a noisy environment with spigen https://www.amazon.fr/Spigen-AlignMaster-Technologie-Auto-Alignment-Protection/dp/B08HPWFGKP/ref=sr_1_1?__mk_fr_FR=ÅMÅŽÕÑ&dchild=1&keywords=spigen+pixel+5&qid=1611689948&sr=8-1
I have removed it. sound is clear !
PS : sorry for my english

anyone else having issues with the proximity sensor with the spigen tempered glass? i've noticed sometimes the AOD switches off and the screen won't turn on after a call when the phone is away from my head
only a reboot fixes it.

Rox598 said:
anyone else having issues with the proximity sensor with the spigen tempered glass? i've noticed sometimes the AOD switches off and the screen won't turn on after a call when the phone is away from my head
only a reboot fixes it.
Click to expand...
Click to collapse
I have not noticed anything untoward personally, the phone appears to work as it should.

mfredom said:
Hello, very bad sound in a noisy environment with spigen https://www.amazon.fr/Spigen-AlignMaster-Technologie-Auto-Alignment-Protection/dp/B08HPWFGKP/ref=sr_1_1?__mk_fr_FR=ÅMÅŽÕÑ&dchild=1&keywords=spigen+pixel+5&qid=1611689948&sr=8-1
I have removed it. sound is clear !
PS : sorry for my english
Click to expand...
Click to collapse
Weirdly i thought it improved call quality, it gave the call audio a bit of depth and seems to have removed some of the tinniness.

Anyone use LK glasses from Amazon? I bought a pack of three and I would like to know how good they are; Are they cover usable screen?
Edit: Received them today. Very good tempered glass, good quality (not the best) very easy to install with the plastic tool, no problem with the camera hole. Fits perfectly.