So what's everyone planning on getting or using?
I'm not a fan of tempered glass, so I still tend to rock the film ones.
Have been using the Ringke Dual Easy Film on my S10e, and they're perfect, however they're not yet available for the Pixel 5 (They are coming though!)
Grabbed myself some of the Atfolix ones https://www.amazon.co.uk/gp/product/B08KLV9P1W/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1, again, used these in the past on the Pixel 2 (I think it was) similar to the Ringke, just a different type of installation method.
Is it wet install film protector?
Had wet on my last phone and nothing beats it
y2grae said:
Is it wet install film protector?
Had wet on my last phone and nothing beats it
Click to expand...
Click to collapse
No it's not the wet installs
I'm in the same boat. I've never had a tempered glass screen protector that I liked. I picked up this since it was the only non-glass one I could find. Hopefully it doesn't suck.
Gibsonflyingv said:
I'm in the same boat. I've never had a tempered glass screen protector that I liked. I picked up this since it was the only non-glass one I could find. Hopefully it doesn't suck.
Click to expand...
Click to collapse
Let me know what they're like!
Ringke dual easy film are out on Amazon, however, it's the wings version, which wraps around the side of the phone. :/
I've just ordered a 'Brotect' screen protector having previously had a positive experience on Nokia 8, will report back.
Man i can't seem to find any good screen protectors on amazon, all those already there are either not available before November (though it already has comments...) Or doesn't fit... Didn't check on other websites though (Fr here).
I too ordered a brotect airglass screen protector, 3 pack for £8.19.
Previously I had purchased one off amazon that I returned as the punch hole cutout would not align - most of the ones on amazon have the same issue of alignment based on the odd reviews coming in. I hope brotect will be good as it's made in Germany.
Screen Protector
I just fitted my Supcase Unicorn Beetle case w/ built in screen protector - it is amazing, makes my P5 feel much better in my giant hands.
if I didnt get this i'd wait for the spigen Glas-T, they fit like a glove and work well on their own or with their cases (liquid air is on order as a backup)
kinny314 said:
I just fitted my Supcase Unicorn Beetle case w/ built in screen protector - it is amazing, makes my P5 feel much better in my giant hands.
if I didnt get this i'd wait for the spigen Glas-T, they fit like a glove and work well on their own or with their cases (liquid air is on order as a backup)
Click to expand...
Click to collapse
Can you post a pic?
Pics
y2grae said:
Can you post a pic?
Click to expand...
Click to collapse
https://ibb.co/M5vDrRz
https://ibb.co/cbXRDGF
https://ibb.co/1LNVN0w
https://ibb.co/qy8Dqx8
Looks a little bulky
How is the screen protector?
Laughing at the speaker holes when it's under the screen
a naked Pixel is just too dainty for my hands, protector is nice and responsive.
I can recommend the Brotect air glass screen protector. Precise width (which has led to me having half a mm uncovered on the right as it's the same amount over on the left...) but very easy application and looks great. Fits fine with a Spigen case.
TonySpoons said:
I can recommend the Brotect air glass screen protector. Precise width (which has led to me having half a mm uncovered on the right as it's the same amount over on the left...) but very easy application and looks great. Fits fine with a Spigen case.
Click to expand...
Click to collapse
Are you talking about this one?
https://www.amazon.co.uk/brotect-Protector-compatible-Resistant-AirGlass-Clear/dp/B08KS88SDT/ref=sr_1_9?dchild=1&keywords=brotect+pixel+5&qid=1603365855&sr=8-9
Does it come with a cutout for the camera as shown in the picture on amazon?
bilalmwirk said:
Are you talking about this one?
https://www.amazon.co.uk/brotect-Protector-compatible-Resistant-AirGlass-Clear/dp/B08KS88SDT/ref=sr_1_9?dchild=1&keywords=brotect+pixel+5&qid=1603365855&sr=8-9
Does it come with a cutout for the camera as shown in the picture on amazon?
Click to expand...
Click to collapse
I ordered mine from here but it looks like the same one. Yes it has that style of cutout.
Avoid the AtFolix range. I've used them before and theyre usually fine, these are another level of poor!
https://imgur.com/a/KyGb30W
Ordered a pack of the Media Devil Protectors - Hopefully these will be better!
I have applied the brotect screen protector. If you apply it properly (my second attempt) then you can cover the entire screen. First time using it but on appearance it does not seem like glass at all, looks more plastic so cannot comment on the durability. But it is very thin and looks great.
Only the top left camera portion is unprotected as there is no punch hole but rather a corner cut out in the protector
I have the LK tempered glass. It is not bad at all. A bit small for my liking. It covers all of the screen though. Has a cut out and sticks well. Tempered glass is going to
be interesting for this phone as I think they will all look very narrow and short. While the screen is flat the gloss border curves away and you have to choose where protection ends. My personal preference might be for film this time but will see. This is fine for now. I had a Zagg protector ordered from them but it got cancelled. Frustrating.
Puzzling why the Supcase has 2 extra holes on the top of the protector in the middle... very weird.
Related
Has anyone bought this screen protector for the N5? I'm considering it since I want a fingerprint-resistant screen protector, but I don't know whether the cut outs will be faulty as their clear screen protector...
If not any other recommendations for a fingerprint-resistant screen protector for N5?
Link to it
http://www.spigen.com/nexus-5-screen-protector-glas-t-slim-premium-tempered-glass.html
I'm a huge spigen fan, considering the GLAS.tR SLIM as they say the t non-rounded chips more easily?
Has anyone used these?
My TR screen should be coming in today. First time using a glass screen, high expectations.
garyHal said:
My TR screen should be coming in today. First time using a glass screen, high expectations.
Click to expand...
Click to collapse
I have been using one on my iphone and love it. Never going back to normal screen protectors.
Rattles said:
I have been using one on my iphone and love it. Never going back to normal screen protectors.
Click to expand...
Click to collapse
2nd that. Have used one on an S4 and loved it. Ordered one for the N5. Should be in this week - can't wait.
garyHal said:
My TR screen should be coming in today. First time using a glass screen, high expectations.
Click to expand...
Click to collapse
please post some pics i've bought the tR last week and i'm waiting it too
There's been high praise for the Spigen glass protectors so I ordered the GLAS.t SLIM. I think the cheaper of the two should provide enough protection as I generally take care of my phones pretty well. The lower profile of the GLAS.t seemed better for me although the rounded corners of the GLAS.tR would have been nice.
I've used cheaper anti-glare film screen protectors in the past, and they worked but didn't last long due to normal wear and tear, so I'm hoping this glass screen protector goes the distance. I hate applying new screen protectors =/
Edit: As for the recommendations, I would NOT advise Clarivue anti-glare. It works well initially but diminishes screen quality and the anti-glare coating wears out quickly in higher-use areas like where the keyboard is. Went through three in the past year.
If you're in Canada, they are now fulfilled by amazon.ca, that means free shipping! http://www.amazon.ca/SPIGEN-Protect...id=1383316041&sr=1-12&keywords=spigen+nexus+5
I'm really interested in getting the glass.t or glass.tr protectors. However, one thing that has always worried me about tempered glass protectors is the possible space between the screen and the protector.
Since glass protectors are not flexible, but the protector and actual screen must be perfectly flat or there will be bubbles due to points of non-contact between the two. Does anyone have experience applying one, and do they fit well together or are there problems?
EDIT: Also, would these protectors work with the Spigen cases or would the extra thickness cause a problem?
Anyone got theirs yet? I'm thinking of getting the GLAS.t Slim since I'd prefer the thinner one.
I'm wondering if the upper lip on the Spigen cases will actually cover the edges of the protector or if there will be a gap. Since I'm planning to use it in combination with a case, if the case covers the edges of the protector I can't see any advantage of the GLAS.tR Slim.
I've also read some other glass protectors have a grid of dots on them. I think this would really annoy me. Do the Spigen protectors have this?
Do they affect viewing angles at all?
Finally, is a cracked or shatter glass protector likely to scratch up the screen? They are of similar hardness...
Thanks.
I turst Spigen
I have not tried the tempered glass on Nexus 5, but I would trust Spigen products all time, they are getting very positive review on Amazon as well, so I would say go for it and I believe they have the money back guarantee, so why to worry
Xodus22 said:
I'm really interested in getting the glass.t or glass.tr protectors. However, one thing that has always worried me about tempered glass protectors is the possible space between the screen and the protector.
Since glass protectors are not flexible, but the protector and actual screen must be perfectly flat or there will be bubbles due to points of non-contact between the two. Does anyone have experience applying one, and do they fit well together or are there problems?
Click to expand...
Click to collapse
I have the Sir Lancelot Armor-Holy Grail for my N4. I have tried them all. First off stay away from Clarivue and Maru, both are just not good.
Haven't tried any others since SLA and ILoome(which have GREAT customer service!) on my N4, so I hope the Spigen can play well with the hybrid case!
The Spigen site recommends using a case along with their GLAS products, so I'm going to assume they fit cases (or at least Spigen cases) just fine.
b.spec said:
The Spigen site recommends using a case along with their GLAS products, so I'm going to assume they fit cases (or at least Spigen cases) just fine.
Click to expand...
Click to collapse
I remember using a SGP screen protector three years ago. I had tried two. The adhesive was bad and it curled off my phone.
FloppyDrive said:
I remember using a SGP screen protector three years ago. I had tried two. The adhesive was bad and it curled off my phone.
Click to expand...
Click to collapse
I've heard this from some people as well. I personally will keep my phone without a case or a bumper at the most, so I can't speak from experience. If it's a wet application screen protector, it's probably much more likely that it will curl off since those tend to extend to the edges of the screen.
Here's what is on the Spigen site:
As this is a glass product, please note that the edges of the glass are the most vulnerable areas. We highly recommend that you use a case along with your GLAS.t SLIM to avoid chipping or cracking the edges of your GLAS.t SLIM
Click to expand...
Click to collapse
tmagritte said:
Since I'm planning to use it in combination with a case, if the case covers the edges of the protector I can't see any advantage of the GLAS.tR Slim.
Click to expand...
Click to collapse
I believe the point of the tR is precisely to be used without a case (the tR product page doesn't have the paragraph about using it with a case to protect the edges). So if you're going to use a case, get the t, if not you should get the tR.
I used the glas TR with my work iphone, and they're fantastic. Very durable and they almost feel better than the naked screen. I have one on order for the N5, but not sure if ill put it on right away. You can't go wrong with one of these though, well worth the money if you are looking for long lasting screen protection.
From Spigen's website:
GLAS.T - Our first and original GLAS.t screen protector. Made of real tempered glass and premium silicone adhesive. It is about 0.4mm thick.
GLAS.tR - The "R" stands for rounded. This glass protector has beveled edges to to help prevent chipping on the edges of the glass. Recommended for users that are not using a case or a minimal case design. About 0.55mm thick.
GLAS.T Slim - We've made our popular GLAS.t even slimmer. Same concept and material as our GLAS.t, but it ranges from 0.23-0.26mm depending on the product.
GLAS.tR Slim - Also the rounded version of the GLAS.t Slim. The thickness is about 0.4mm
Click to expand...
Click to collapse
I'm having some trouble with the GLAS.tR. I just installed it, and the bottom left corner is not sticking, and there is a spot that's not sticking on the right side of the headset speaker. I'm trying to leave some weight on top of it and see if that will fix it.
wormbaby11 said:
I'm having some trouble with the GLAS.tR. I just installed it, and the bottom left corner is not sticking, and there is a spot that's not sticking on the right side of the headset speaker. I'm trying to leave some weight on top of it and see if that will fix it.
Click to expand...
Click to collapse
same here! I have three rather large "bubbles" (though thankfully none are on the screen), one of which is in the bottom left corner. When I apply pressure, it reduces to a tiny bubble, but after about a minute, it will have expanded again. I tried putting a textbook on top overnight, but this morning when i lifted the book, it just grew back in a minute.
If it doesn't fix itself in another 24 hour, I'm going to call Spigen.
What are good film screen protectors for our device? With full coverage and proper cutouts. Clear and not soft.
Looks like there won't be any decent tempered glass option, so I'm starting this thread.
This is what I use, and I am happy with it.
I did figure out that it was polarized the other day when using my 10 for navigation in my car. I could not see it in portrait with my sunglasses on. I had to either turn my head or rotate to landscape to be able to see the phone display.
EDIT: The screen is polarized *Not* the screen protector
http://www.amazon.com/Screen-Protec...&redirect=true&ref_=oh_aui_detailpage_o03_s00
amq said:
What are good film screen protectors for our device? With full coverage and proper cutouts. Clear and not soft.
Looks like there won't be any decent tempered glass option, so I'm starting this thread.
Click to expand...
Click to collapse
Spigen crystal is pretty good. I tried a couple of TGSP's and they sucked really bad so I turned to the PET film from Spigen. It's really thin, clear, and precisely cut. It could be a tiny bit wider, but it does cover the viewable area. It feels pretty decent for a film (not a lot of friction) and you can barely tell it's there. $7.99 for a 3-pack on Amazon.
I second the Spigen Crystal Film screen protector. I've been using it and it's done a decent job so far. Not as nice as a TGSP would be in regards to feel but decent smudge/fingerprint resistance.
Post some pictures of your phone with the Spigen film?
Patiently waiting for Maximus to come to the HTC 10
Another vote for Spigen
Sent from my HTC 10 using Tapatalk
Currently awaiting my Spigen Crystal.
I've Spigen Crystal PET screen protectors were my go-to before tempered glass became the norm, so I'll probably be pretty happy with them (although I will miss the feel of glass)
Spigen Crystal
Fitment is perfect at the top of the phone. Could be wider but otherwise it's awesome.
Sent from my One M9 using XDA Labs
rdmack said:
Spigen Crystal
Fitment is perfect at the top of the phone. Could be wider but otherwise it's awesome.
Click to expand...
Click to collapse
This is the first picture I've seen regarding the fit of this screen pro. Cheers!
I'm using the Spigen crystal too; unless the light is just right, it's hard to see it at all.
The surface is less 'slippy' to the finger than the glass, but having used a similar protector (not Spigen) on my old phone, I find it familiar.
Definitely a much better fit than any of the tempered glass protectors.
However, I've noticed that it's much thinner/flimsier than the older Spigen Crystal PET protectors.
I split a 3-pack with two buddies of mine with the HTC 10, but unfortunately I think mine warped slightly during install:
http://imgur.com/a/AbAW8
Sent an e-mail through asking for a warranty replacement - we'll see if they are willing to replace it.
Other than that warp bubble, I'm pretty happy with it overall. Not as slick as glass, but does the job.
mazubo said:
This is the first picture I've seen regarding the fit of this screen pro. Cheers!
Click to expand...
Click to collapse
I posted some a while ago at people's request in my case OP. That's probably why you didn't see them, but the Spigen Crystal fits perfectly and works well. Ive been using one on my 10 since I got it
Pilz said:
I posted some a while ago at people's request in my case OP. That's probably why you didn't see them, but the Spigen Crystal fits perfectly and works well. Ive been using one on my 10 since I got it
Click to expand...
Click to collapse
I found your post! I love your reviews, keep em coming !
I have the spigen based on comments here and I don't like it. The adhesion is poor and I already had to replace my initial protector after a week, not to mention its a little tacky and not smooth, and looks wavy and uneven under light. As far as dimensions are concerned its good, I just wish it lasted longer than a week.
Another vote for the spigen. Applied properly, mine has no bubbles and is not wavy. Also, the comments about it being too small are incorrect. It is sized perfectly for the flat part of the screen. At the edges on all sides the glass on the 10 is beveled. If the screen protector went to the edges there would be bubbles or the protector would peel off.
I just placed an order for the zagg film.
Ill report back when i receive it
Just received in the mail the spigen crystal screen protector, and incipio NGP case. Both fit perfectly! The screen pro fit as close to the edge as possible, and no issues with edge lifting while putting the case on the phone! After installing the screen pro there are very small little waves which I've seen on other screen protectors, which disappear within a day or two..
Prior to this film protector I tried the nillkin glass and was a horrible fit. (I did receive a refund for it however..)
I am now content with case and screen protector!
Cheers,
I installed Spigen crystal film, it could be 2mm each side wider but I dont mind. Its not bad.
Check out my review for the spigen Crystal screen protector on the below thread
http://forum.xda-developers.com/showthread.php?p=67144597
Sent from my HTC 10 using XDA-Developers mobile app
Zzan said:
This is what I use, and I am happy with it.
I did figure out that it was polarized the other day when using my 10 for navigation in my car. I could not see it in portrait with my sunglasses on. I had to either turn my head or rotate to landscape to be able to see the phone display.
http://www.amazon.com/Screen-Protec...&redirect=true&ref_=oh_aui_detailpage_o03_s00
Click to expand...
Click to collapse
I don't know if you figured this out yet, but it is your screen that is polarized, not the film protector you applied.
For some reason, the Tianma display panels are polarized. Probably for enhanced viewing in sunlight, is my guess.
Since there is only a thread for the Nillkin cases and tempered glass I thought it would be nice to have some thread for the accessories in general.
Until this day I tried 3 cases, two screen protectors (films) and two tempered glass protectors.
Case No. 1 ) Slim, silicone case http://www.ebay.com/itm/Transparent-Clear-Silicone-Slim-Gel-Case-For-Huawei-Honor-9/112446352466?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 - Very slim and light case made from nice silicone BUT the protection when dropped would be none. It's not made 100% precisely and since it's silicone it doesn't look any good on the back where it creates bubbles. I've ordered this as the first case to have at least some protection. Nice thing is they include free screen protector but the quality isn't very good - doesn't cover the whole display (I'm not talking about edge-to-edge) and there are 2mm gaps on each side and when the display is on it looks terrible. 2/5
Case No. 2) Nillkin Super Frosted http://www.ebay.com/itm/For-HUAWEI-Honor-9-NILLKIN-Super-Frosted-Shield-Hard-Plastic-Back-Covers-Cases-/152596952252?var=&hash=item23877cb4bc:m:mtNLCAV-KRHaAK2TUOYLPTg - very nice case, really sturdy BUT I have few complaints - it's kinda slippery on the sides but this will go away after some use maybe and the bottom side around jack, charging port and speaker is a bit sharp and if you're holding the phone with the little finger on the bottom it't not really comfortable. Besides that it's really nice case for the price but I expected a bit more. But once again for the price it's more than OK. 4/5
Case No. 3) TPU Shockproof case with "carbon" http://www.ebay.com/itm/Luxury-Carbon-Fiber-Slim-Shockproof-Soft-TPU-Back-Case-For-Huawei-Honor-9-Magic/112325496837?ssPageName=STRK%3AMEBIDX%3AIT&var=412748326145&_trksid=p2060353.m2749.l2649 - as you can imagine, there is absolutely no carbon at all, just some kind of "sticker" or what it is. Nevermind, this case is the best of the three. Really nice case made from TPU, sturdy, should have the best drop protection and fits just perfectly. There is a small "rim" around the screen that should protect the screen from scratches when the phone is "face down". 5/5
Screen protector (film) No. 1) Nillkin Super Clear Protective Film - in terms of size the best screen protector I've had. Obviously it's not edge-to-edge but it does cover the whole display with gaps on the edges BUT the display is fully protected so thumbs up for me. In terms of "anti-fingerprint" it's nowhere close to the display or the back but is much better than some noname protector I've got with TPU case. Overall very nice screen protector for free but I'm still waiting for the Nillkin H+ tempered glass and some noname edge-to-edge tempered glass. 4/5
Tempered glass No. 1) Edge-to-edge blue 2.5D tempered glass http://www.ebay.com/itm/9H-2-5D-Full-Cover-Real-Tempered-Glass-Screen-Protective-Film-For-Huawei-honor-9/152593109357?ssPageName=STRK%3AMEBIDX%3AIT&var=452016649496&_trksid=p2060353.m2749.l2649 - really nice tempered glass (2 pcs) for the price. It has the adhesive only on the top, bottom and the sides but the application was very easy and the glass holds on even with any of tested cases. It has some "dots" in the screen area so I got no rainbow effect whatsoever. The blue color is a bit different from the original color od the phone but it's not a problem since you have your phone in a case. Overall for the price pretty good. 4/5
Tempered glass No. 2) Normal tempered glass Caliber (bought in CZE) - not edge-to-edge, doesn't cover the whole screen, gaps on the sides. Overall sh*t. 1/5
Still waiting for the Nillkin H+ tempered glass.
Nilkin Amazing H+ Pro is No Go
Got the 0.2mm H+ Pro. It's cover the display area for like 99%, with-out just about 0.5mm on each side, after all still the best.
BUT. The silicon layer doesn't hold the tempered glass on both sides, looks like the phone display curve started a bit earlier than its needed for the protector.
It doesn't stick to the display, making it looks like ****, with 3mm frame from each side. Top/bottom sides stick OK, all the way to edges.
So Nilkin Amazing H+ Pro is No Go for me.
Well, got it yesterday so I'm still waiting to try it but not sure if wan't to :laugh:
cases
sooooo, I bought these from tvc mall. They were so cheap that I bought three different ones with the intent of disposing of whichever were poor. Thing is, they are all good in their own way. The plain bumper is just very slimline. The rugged looking one is cool as it has a stand in landscape mode, and the wallet is exceptional quality, given the price. All three fit perfectly, but the plain bumper makes the power and volume buttons so much more tactile. The rugged one looks really cheap in silver, perhaps black would have been a good choice. As i wasn't expecting much from the wallet one, I also oredered the nilkin wallet but that hasn't arrived yet.
https://www.tvc-mall.com/details/dr...r-9-auspicious-dragon-black-sku10174840d.html
https://www.tvc-mall.com/details/fo...casing-with-kickstand-black-sku10174919a.html
https://www.tvc-mall.com/details/ma...ot-for-huawei-honor-9-black-sku10175044a.html
https://www.tvc-mall.com/details/ni...se-for-huawei-honor-9-black-sku10174916a.html
I have also ordered the ultimate sheild screen protector, which is edge to edge, in black as I think it will make an excellent contrast to the silver rear of the handset....which wont be visible when the (absolutely necessary) bumper is fitted!
Ultimate sheild screen protector
.... And the ultimate sheild protector turned up. It is excellent. A word of caution, unless this is fitted absolutely perfectly, it will render one or both of the capacitance keys inoperable. This happened to me as i fitted the sheild a fraction of a millimetre to the right. I carefully removed and replaced it with more accuracy.
Here is a pic of the black sheild fitted to my silver H9, and a photo of the plain bumper fitted from my previous post. Svelt but rugged!
After a couple of hours of use I can say that there has been no loss of sensitivity on the screen or capacitive buttons, but on darker details and the blacks, it does look like the screen is behind a sheet of glass. You will know what i mean if you have used a screen protector which bonds over its entirety, whereas this one has a mild adhesive at the top and bottom of the protector, where the bezels are. A small price to pay i think to protect my new device. It is mostly noticeable in bright light, not so much in low light. And I love the new black look of the bezels with the silver fingerprint sensor still visible.
Right, so, some more hours on....the ultimate sheild has begun to show its flaws. Towards the middle of the screen there is now what i can only describe as a "woodgrain" effect. This could be caused by tiny amounts of moisture getting between the screen and protector, which I guess there is nothing to stop that happening. They offered a refund for dissatisfaction so I guess I will be chasing that up. Pfffft. So disappointed.....
Is there a smart cover for it ?!
Just bought the TPU Shockproof case and it is amazing! It's a very good quality and it doesn't makes the phone feel like a toy.
I really like it and definitely recommend it!
NotoriousNick said:
Just bought the TPU Shockproof case and it is amazing! It's a very good quality and it doesn't makes the phone feel like a toy.
I really like it and definitely recommend it!
Click to expand...
Click to collapse
Can you upload a photo of the phone with the case applied?! That would be awesome
The nilkin "sparkle series" wallet turned up. Its awful. Unlike the cheap wallet I purchased, which remains closed under magnetism, the nilkin just falls open and feels poorer quality.
The Ipaky bumper with the clear perspex back is, however, very nice. The only caveat, it sits flush with the screen so offers no protection if you decide to place your device screen down.
I'm waiting for the smart cover case, if it didn't come fast, I'll go with a skin.
I have bought an honor 9 few days ago. Somebody could suggest me a screen protector that cover whole display? With 3D display is so difficult find a good screen protector....
danygold95 said:
I have bought an honor 9 few days ago. Somebody could suggest me a screen protector that cover whole display? With 3D display is so difficult find a good screen protector....
Click to expand...
Click to collapse
Here you go
https://www.ultimateshield.co.uk/collections/honor-9
PalakMi said:
Here you go
https://www.ultimateshield.co.uk/collections/honor-9
Click to expand...
Click to collapse
Thanks.
I don't like this type of tempered glass (i know that is the only solution for cover 3d display without space).
So, someone has tested "invisible film screen protector"?
danygold95 said:
Thanks.
I don't like this type of tempered glass (i know that is the only solution for cover 3d display without space).
So, someone has tested "invisible film screen protector"?
Click to expand...
Click to collapse
I didn't test, I will try it once I get my honor 9
PalakMi said:
I didn't test, I will try it once I get my honor 9
Click to expand...
Click to collapse
:good:
If someone else has tried this protective film, please give us a feedback.
Did someone try the Mofi screen protector? According to a review on Aliexpress it has minimal space at both sides.
I've seen ones from ultimate shield, I'm considering getting one.
PalakMi said:
I've seen ones from ultimate shield, I'm considering getting one.
Click to expand...
Click to collapse
Good luck with that. Did you read my earlier post? As the protector does not actually sit on the screen, due to the adhesive around the edges, it is susceptible to the "rainbow effect" which i think is caused by humidity between screen and protector. It seemed to manifest itself after the phone had been in my pocket and warmed up. I don't have an overly sweaty crotch.....
Anyhow, they apologised and promptly sent a replacement and the same happened again.
By all means give it a go and they will refund you without issue.
Okay. Here it is. We can start the debate soon about which screen protectors actually work on this phone without Halo and bubble issues. It is always an issue with these curved glass screens but there are always 1 or 2 screen protectors that people can get to actually work. Please post which ones you have purchased and how well they worked.
Posting without pictures is not helpful to anyone.
Ordered the ones through Amazon from Mr. Shields and the case/protector from HanhuaTech. The Mr. Shields order gave me 3 and all 3 were nothing but bubbles. Never used their stuff before and highly disappointed. The latter was a nice case, but the screen protector has a black ring around the edges and is impossible to line-up so it doesn't cover the edges of the display area. No bubbles though. Just cut off part of my screen. Still looking. The Otterbox Defender does not include a screen protector.
I tried those Mr shield protectors with my v30 and they were garbage.
The supershieldz worked well with my v30 but the v40 version has that stupid black border which means it only has adhesive at the edges and will have the rainbow effect
Guess we're all screwed for a bit. For what this thing costs, I refuse not to have the tempered glass protector, but they all have the black ring or bubbles. Early adopter blues I guess.
Curved screens, like the V40 (and pretty much every flagship phone) have tend to have poor tempered glass adhesion, in my experience. It seems they all utilize only adhesive along the outer edge, leading them to come unstuck extremely quickly and easily. All of the reviewed models on Amazon, likewise, have this problem. Hopefully a good one will come out for this phone at some point reasonably soon.
I know that T-Mobile tried to sell me an overpriced one when I purchased my phone, though I'm not certain they had any in stock yet. If no models come out that stay stuck pretty well, I will take purchase one of theirs, as they will replace it every time I come in the store.
Be patient and wait for IQ Shield LiQuidSkin, best on the market for curved screens. Available mid Nov.
I quite enjoy the bodyguardz one I got. It's aluminosilicate like gorilla glass and does have the black border, however I've seen 0 rainbowing. Also comes with lifetime replacements which I will probably thoroughly abuse.
I just ordered a set right from their website. It didn't list that it wasn't in stock and ready to ship, so we'll see!
Don't rush! The earlier you get it, the bigger the risk it's not properly tested yet (especially when it comes to curved screens). This early after release, you're the guinea pig...
While I'm waiting for "IQ Shield LiQuidSkin" I ordered "PULEN Screen Protector"... I'll keep you updated!
I ordered the Poetic tempered glass screen protector. Works like a charm. 3 Days and still sticking no problem. No halo, rainbow effect, etc. Absolutely loving it. Fit is amazing and the feel is as good as the original glass, if not slicker. I'm using it with a Ringke Fusion-X case and they work perfectly together. The screen protector is case friendly and the gap between the glass and case is very minimal.
https://www.amazon.com/gp/product/B07HNNBJLC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
nyttliv7 said:
While I'm waiting for "IQ Shield LiQuidSkin" I ordered "PULEN Screen Protector"... I'll keep you updated!
Click to expand...
Click to collapse
I know PULEN hasn't got very good reviews, but for now, while waiting for LiQuidSkin, it's all good, fits almost perfect. Nothing I recommend though. The black frame covers a faction of the visibility of the screen (left and right side)
But totally OK. Let's see if it falls off before I get my LiQuidSkin?
tveith said:
I ordered the Poetic tempered glass screen protector. Works like a charm. 3 Days and still sticking no problem. No halo, rainbow effect, etc. Absolutely loving it. Fit is amazing and the feel is as good as the original glass, if not slicker. I'm using it with a Ringke Fusion-X case and they work perfectly together. The screen protector is case friendly and the gap between the glass and case is very minimal.
https://www.amazon.com/gp/product/B07HNNBJLC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I was just looking at the poetic glass on Amazon and can't seem to find a good enough review that specifies it the tempered glass fully seals to the device or only seals around the edges of the glass?
Just heard from Whitestone email support that they do not currently plan on producing Dome Glass for the V40... real shame. Maybe some other V40 owners can chime in to pique their interest?
I was also just looking at the Poetic before I came over here, and also wonder if it is in fact full-adhesive. Anyone?
justinkerng said:
Just heard from Whitestone email support that they do not currently plan on producing Dome Glass for the V40... real shame. Maybe some other V40 owners can chime in to pique their interest?
I was also just looking at the Poetic before I came over here, and also wonder if it is in fact full-adhesive. Anyone?
Click to expand...
Click to collapse
I've been looking at that but but I'm in high doubts it's full adhesive
I just installed the Poetic tempered glass from Amazon and it has a massive rainbow effect. There clearly isn't any adhesive in the middle. Until someone makes a decent one it will have to do.
Blown 89 said:
I just installed the Poetic tempered glass from Amazon and it has a massive rainbow effect. There clearly isn't any adhesive in the middle. Until someone makes a decent one it will have to do.
Click to expand...
Click to collapse
Dang, it seems so difficult to find good tempered glass screen protectors. Poetic seemed promising but glad you confirmed it is not full adhesive, since so many brands don't specify.
nyttliv7 said:
I know PULEN hasn't got very good reviews, but for now, while waiting for LiQuidSkin, it's all good, fits almost perfect. Nothing I recommend though. The black frame covers a faction of the visibility of the screen (left and right side)
But totally OK. Let's see if it falls off before I get my LiQuidSkin?
Click to expand...
Click to collapse
Update!
Amid medium level reviews on Amazon, I have to say I'm surprised this pulen sp is working so well. Some kind of drier than normal glue, covers the whole sp, and if you place it perfectly, it's actually a very nice sp. The black frame slightly covers (1/10 of a mm) of left and right sides, but it really doesn't take away anything, not even the screen off blue notification around the frame. I'm not sure about the physical strength though. I'm a very careful person, never really drop my phone. No rainbow! No dust stuck around the borders. Right now I'm not sure I will order the liQuidSkin? I'm happy with this one
Folks, whitestone dome for LG V40 available for sale @ Amazon :
https://www.amazon.com/dp/B07JQT17Q4/ref=cm_sw_r_em_apa_gAR5BbVS4BYDV
I'm using Key liquid glass screen protector. I can't stand the film protectors so decided to use this. It's a wipe on application, scratch resistant, 9H superior hardness rating, water proof and anti bacterial. Just clean the screen with the included cleaning wipe than apply the liquid screen protector via the included wipe. Let sit for about 5 minutes and you're set.
Can anyone recommend a tempered glass or other quality screen protector for the outer cover display? Something that you've personally used and can vouch for.
Thanks in advance!
Same. Front protector scratched on me 1st day. Also peeled up when I was opening. Need to replace.
JayRolla said:
Same. Front protector scratched on me 1st day. Also peeled up when I was opening. Need to replace.
Click to expand...
Click to collapse
Yep. Mine was basically destroyed on day 1 with normal use.
Whitestone has a ez screen protector and also a liquid adhered protector. I have installed ez one without trouble since a few days before official release and it's still holding strong. You also get 2 for like $10 so you can't really beat it
Sonin66 said:
Whitestone has a ez screen protector and also a liquid adhered protector. I have installed ez one without trouble since a few days before official release and it's still holding strong. You also get 2 for like $10 so you can't really beat it
Click to expand...
Click to collapse
Looks like it might have trouble fitting properly if used with a case. The black border looks problematic. Have you used it with a case and, if so, do you have any pics or comments on that? Thanks.
I'm trying to figure out the best front screen protector as well. I would prefer tempered glass but have only seen a couple and not in stock at the moment. Still have the stock one on it but it's starting to bubble and peel/Crack on the sides.
I'm using these white stone dome front tempered glass screen protector. I got two of them for $10. They work decent with a case. But make sure it is a minimalistic case like the Samsung carbon fiber.
pieces of cake said:
Looks like it might have trouble fitting properly if used with a case. The black border looks problematic. Have you used it with a case and, if so, do you have any pics or comments on that? Thanks.
Click to expand...
Click to collapse
I am currently using samsungs silicone case and there is no problems with it coming off. Have not tried with a heavy duty case but I honestly don't see it as a problem
I got my leather case (samsung one) today and love it. However as soon as i applied it the cover screen plastic protector came off in the edge so i just removed it.
since it seems pretty thick on the inside - is there any 9h glass available yet which fits with the case? Or can i go to a samsung store and they reapply the plastic one on the cover screen?
i dont mind paying
I'm using the Whitestone glass screen protector. NOT the EZ. I've used it on all my phones since it was first released, including I Note devices and the Z Fold 2.
I use this for Extra protection
Whitestone Dome Glass UV.
skinnytoo2 said:
I'm using these white stone dome front tempered glass screen protector. I got two of them for $10. They work decent with a case. But make sure it is a minimalistic case like the Samsung carbon fiber.
Click to expand...
Click to collapse
I'm waiting on these to get delivered to me today actually. The stock one on my front screen is starting bubble and peel up on the side. My case kinda covers it up but the stock one is also picking up quite a few scratches. Hopefully these will do the job. Isn't that easy to fine a good tempered glass screen protector for this device. Spigen looks to be coming out with one but not available yet.
pside15 said:
I'm waiting on these to get delivered to me today actually. The stock one on my front screen is starting bubble and peel up on the side. My case kinda covers it up but the stock one is also picking up quite a few scratches. Hopefully these will do the job. Isn't that easy to fine a good tempered glass screen protector for this device. Spigen looks to be coming out with one but not available yet.
Click to expand...
Click to collapse
I had Spigen EZ for front screen and it is crap. Peeled off next day and applied Whitestone Dome.
Damian said:
I had Spigen EZ for front screen and it is crap. Peeled off next day and applied Whitestone Dome.
Click to expand...
Click to collapse
Hmm, not sure what that one is. I haven't seen a front screen protector from Spigen anywhere. The one I was referring to is the one below, which is the only one on their site and doesn't appear to be out yet since it says coming soon.
Galaxy Z Fold 3 Screen Protector GLAS.tR Full Cover Glass + Hinge Film
Shield your Galaxy Z Fold 3 with our premium tempered glass full cover Screen Protector. The Full Cover Glass screen protector is the ultimate solution for screen defense to ensure a flawless fit with seamless case compatibility.
www.spigen.com
pside15 said:
Hmm, not sure what that one is. I haven't seen a front screen protector from Spigen anywhere. The one I was referring to is the one below, which is the only one on their site and doesn't appear to be out yet since it says coming soon.
Galaxy Z Fold 3 Screen Protector GLAS.tR Full Cover Glass + Hinge Film
Shield your Galaxy Z Fold 3 with our premium tempered glass full cover Screen Protector. The Full Cover Glass screen protector is the ultimate solution for screen defense to ensure a flawless fit with seamless case compatibility.
www.spigen.com
Click to expand...
Click to collapse
Yeah, exactly this one. My mistake I wrote EZ.
In UK is available from Amazon.
Anyone got a recommendation for a good case? Id normally use Spigen but some of their case prices are ambitious to say the least.
Razuddin said:
Anyone got a recommendation for a good case? Id normally use Spigen but some of their case prices are ambitious to say the least.
Click to expand...
Click to collapse
I'm using the Ringke Slim and I really like it. I ordered the Spigen S Pen case, but it won't ship for another week or so. Looks bigger than I'd like, but definitely need something I can switch to when I really need to carry the S Pen and don't want to have it loose in a pocket.
I also ordered the official Samsung Aramid case (which also won't arrive for another week or two). Based on the reports I've read and the pics I've seen, the Aramid appears to be the slimmest case available for the ZF3. I hate bulky cases, especially on a device that's as large as the ZF3, so I'm guessing I'll probably settle on the Aramid for 90% of my daily use.
pieces of cake said:
I'm using the Ringke Slim and I really like it. I ordered the Spigen S Pen case, but it won't ship for another week or so. Looks bigger than I'd like, but definitely need something I can switch to when I really need to carry the S Pen and don't want to have it loose in a pocket.
I also ordered the official Samsung Aramid case (which also won't arrive for another week or two). Based on the reports I've read and the pics I've seen, the Aramid appears to be the slimmest case available for the ZF3. I hate bulky cases, especially on a device that's as large as the ZF3, so I'm guessing I'll probably settle on the Aramid for 90% of my daily use.
Click to expand...
Click to collapse
Thanks buddy, how are you finding the ringke slim? I was keen on that until i read a few amazon reviews mentioning the case had scratched their devices? Have you had any such issue? Would be good to hear if you used the sticky pads and if they are easy/hard to remove.
Razuddin said:
Thanks buddy, how are you finding the ringke slim? I was keen on that until i read a few amazon reviews mentioning the case had scratched their devices? Have you had any such issue? Would be good to hear if you used the sticky pads and if they are easy/hard to remove.
Click to expand...
Click to collapse
Great case. No scratches. Not sure how anyone scratched their Fold with this case. You'd have to be pretty damn careless to do that. I used the adhesive strips.