Hi,
My watch sm-r820 on tizen 5.5.0.1 CSC XEF .. i tried to push the epk file on my watch and install the shm on my note 8 android 9 ..
The installation was a really success .. the bp is working fine but the ECG didn't response . I got an advice to check with 2test and they told me that i have to get 0 as value in L-O parameter and if i got 5 as value that's mean that my ecg sensor is failed.. i need your help cause my guarantee will be over in 10 days ..
What that mean this parameter ( L-O) and is it tue that the value 5 means ecg faillure
I am experiencing the same issue now. Have you got any answer about this issue or have you been able to reslove it? My GWA2 was measuring both BP and ECG properly until last month but the ECG suddenly stopped working. L-0 is returning 5 and rhe watch doesn't detect me tuching the sensor button. Can a HW Reset help?
Related
Hello,
I'm thinking To buy a Watch GT activ (1) and read on different sources the the stress feature is displayed in the Phone app but it's not possible To enable on the international watch version.
What about your experience ?
Thanx
Yeah it's in the app but doesn't work.
i have huawei watch gt. in start stress test was working but after some software updates it stop working. now its says connect supported devices.
DiGGeR2 said:
Hello,
I'm thinking To buy a Watch GT activ (1) and read on different sources the the stress feature is displayed in the Phone app but it's not possible To enable on the international watch version.
What about your experience ?
Thanx
Click to expand...
Click to collapse
Stress works fine with me. Xiaomi mi A2 lite with GT 2.
eljom said:
Stress works fine with me. Xiaomi mi A2 lite with GT 2.
Click to expand...
Click to collapse
For now with up to date firmware there is NO stress measure function in Gt Active 1.
i have huawei watch gt. in start stress test was working but after some software updates it stop working. now its says connect supported devices
Hey all,
recently my SMR-810 has been playing up.
Battery usually would last me 2-3 days, but for the last few weeks I've only been getting 12 hours out of it.
It all started after one night when it turned off by itself, even though the battery was still on 40%.
Since then, it has also been having slow down issues, where it will act as if it is in battery saver mode.
Some days the step counter stops working as well, until I do a restart.
Gestures also stop working sometimes until I do a restart.
I've done a factory reset, and that didn't fix any issues.
Watch is running One watch UI 1.5 with Tizen version 4.0.0.7.
Any suggestions as to what I can do?
Please be more specific about your Firmware...
Enter this Code like you would call someone...
Code:
*#1234#
Write here infos you see...
Best Regards
Ap r810xxu1dsl1
CSC r810oxa1dsl1
For US CSC they offered Version DTA4...
https://doc.samsungmobile.com/SM-R810/XAR/doc.html
For India and Korea meanhwile DTC1...
https://doc.samsungmobile.com/SM-R810/INU/doc.html
No idea if something goes better if you try...
Best Regards
Thanks for the reply.
Any ideas which version is better?
EDIT: The Indian one came out later, so I'll assume that's better. Probably the same though.....
EDIT EDIT: What's the best guide to change region on SMR-810?
adfree said:
For US CSC they offered Version DTA4...
https://doc.samsungmobile.com/SM-R810/XAR/doc.html
For India and Korea meanhwile DTC1...
https://doc.samsungmobile.com/SM-R810/INU/doc.html
No idea if something goes better if you try...
Best Regards
Click to expand...
Click to collapse
Where can we download DTC1 for indian version R810
AP R810XXU1DSL1
CSC R810OXA1DSL1
Hi guys,
I have an Active 2 (SM—R820 RFAMBOJELZJ). I have an OnePlus 8 Pro. I had an update one week ago, to Tizen 5.5.0.1.
My problem is that I can connect to the phone, via Bluetooth, BUT I cannot connect to Samsung Galaxy Store. I can’t even get to load watch faces without a message „An error has occurred. Try again.“ All together, there is now to way to get a Samsung Account.
Please, please help me.
OK, got it! Samsung Accessory Service... all couple of things charged and it's working. Phew!
Hello ,
I'm using this https://github.com/satcar77/miband4 repository for reading data from miband5 everything is working good,except i can't read spo2 data.
my last try was getting this pocket when i requested spo2 on band
b'\x19S\x00\x00\xff\x05\x05\x80\x80S\x02\x00\xff\x05\x05\x80\x80'
here is the problem it seems it's not a real hex data so how can i make it work
Bought Mi Smart Band 5 a couple of days ago, york global version.
You can't read spO2 due to software restriction or cause spO2 is not available?
Thanks.
Ok so let me start this by saying that I really don't know what I am doing and I really need help with this. I ordered an SM-R825U samsung galaxy active 2 watch off of ebay and it came from the US (I live in Canada). I found out that to use LTE and Samsung pay, I needed to flash different firmware and change the csc code (I followed the tutorial entirely). I get that my watch is now 825F and thats all fine, but what I don't get is why my watch is now downloading samsung pay in sweden and refuses to connect to LTE. I've tried changing stock firmwares (I somehow haven't bricked my watch) but I have a different problem every time (Updates won't work, samsung pay wont work, lte wont work, etc). My watch is currently on Tizen 5.5.0.2. If someone could please walk me through how to change my watch to Canadian and give me the right files, that would be amazing!
I've done a bit more research and I was wondering if these files would work?
https://easy-firmware.com/index.php?a=downloads&b=file&id=339111 (Combination files)
https://easy-firmware.com/index.php?a=downloads&b=file&id=327322 (Stock Firmware)
If I follow the normal instructions, should these work just fine?
Yeah so in case anyone has the same problem as me, as long as you follow this Youtube video (
) and use the files that I put in my last reply (unfortunately they are paid. Maybe you can find them somewhere for free, I'm not sure) instead of the ones in the video, you should be good. I followed those steps and now my watch is working with Samsung Pay and LTE!