Hello,
I'm thinking To buy a Watch GT activ (1) and read on different sources the the stress feature is displayed in the Phone app but it's not possible To enable on the international watch version.
What about your experience ?
Thanx
Yeah it's in the app but doesn't work.
i have huawei watch gt. in start stress test was working but after some software updates it stop working. now its says connect supported devices.
DiGGeR2 said:
Hello,
I'm thinking To buy a Watch GT activ (1) and read on different sources the the stress feature is displayed in the Phone app but it's not possible To enable on the international watch version.
What about your experience ?
Thanx
Click to expand...
Click to collapse
Stress works fine with me. Xiaomi mi A2 lite with GT 2.
eljom said:
Stress works fine with me. Xiaomi mi A2 lite with GT 2.
Click to expand...
Click to collapse
For now with up to date firmware there is NO stress measure function in Gt Active 1.
i have huawei watch gt. in start stress test was working but after some software updates it stop working. now its says connect supported devices
Related
Hi guys hope you can help,
I recently got a MI Band and tried different versions of the apps but could only sync it once with a very old version (think 1.0.xx) but the step counter got stuck and the sleep data was not recognized (NOTE: Even though i could connect and sms/call notifications worked aswell)
so i tried different versions of the app but could not sync it with the newer versions...
My phone is a THL T11 (BLE supported) and the band works perfectly with"gliderun" (its an open beta app which works with the band but only got step counter yet , but this prooves that my band is working)
is it only the app which isnt working probably with my device?
what can i do about it?
is it possibly to pair it with a tablet, i got a e-Ceros revolution but couldnt paired it with my band
Thanks for help:good:
Im unable to decline calls in my mi band 4. But im able to silent calls
Device:- Redmi note 7
Android version:- android 10(Atom os)
Mi band is chinese version
I also tried with other devices as well
I have the same problem th lat I can't decline calls.;(
Try to remove telephone permission from Mi Fit in Android app settings. Then run Mi Fit and allow the permission when it asks for it (you might need to disable/enable call notification in Mi Fit to trigger it). Then try the function again.
_mysiak_ said:
Try to remove telephone permission from Mi Fit in Android app settings. Then run Mi Fit and allow the permission when it asks for it (you might need to disable/enable call notification in Mi Fit to trigger it). Then try the function again.
Click to expand...
Click to collapse
Thank you for your answer. I tried it but it didn't work. I have 3 mi band 4's and in one of them I'm not able to silent calls whereas in 2 of them im not able to decline calls. It is really annoying
i am having the same problem with mi band 4. Earlier i had mi band 3 and Honor 7x phone, everything worked. Then i got mi band 4 and oneplus 7t pro, everything works here except call decline feature. Tried all permissions, pairing unpairing nothing working. Any help?
P.S. btw the mi band 3 that was working perfectly with honor phone, also have this problem now when its paired to my wife's phone i.e. some Vivo model.
I have a Redmi note 8T and works like to know if there is a way to activate the call recorder feature on my phone without unlocking/rooting it or installing another ROM ?
The app is available on my phone but I believe that it is disabled due to EU laws.
Jamesyk34 said:
I have a Redmi note 8T and works like to know if there is a way to activate the call recorder feature on my phone without unlocking/rooting it or installing another ROM ?
The app is available on my phone but I believe that it is disabled due to EU laws.
Click to expand...
Click to collapse
well without unlocking the only other option you have is to search for some call recording apps on play store...good luck
hi. i need help. I am stuck at odin mode in my galaxy watch 46mm. i flashed with wrong firmware on my galaxy watch 46mm. instead of R805f i flashed it with R805U.
now it is shows only 2 screens- ODIN MODE or reboot options screen. Any thing i select at reboot mode , bring me back to odin mode.
Please help.
Check this Youtube Video... inside this post...
SM-R765F Teardown
Dear friends, I found that the LTE connection is very useful when you have to leave your mobile somewhere and you can get calls and notifications through mobile connection. I bought a Gear S3 LTE (R765) from a Singapore site because in Italy it...
forum.xda-developers.com
Best Regards
adfree said:
Check this Youtube Video... inside this post...
SM-R765F Teardown
Dear friends, I found that the LTE connection is very useful when you have to leave your mobile somewhere and you can get calls and notifications through mobile connection. I bought a Gear S3 LTE (R765) from a Singapore site because in Italy it...
forum.xda-developers.com
Best Regards
Click to expand...
Click to collapse
Thanks for replying. my watch was in warranty. service center guy put it back working. Do you think there is way to put R805U on my watch??
I recently bought a watch 3 from facebook marketplace. The seller said that he simply forgot the pin code. I figured, easy fix, and I have a cheap watch 3. Turns out that it was actually a part of the West Point Covid Tracing program and is locked down, HARD. No recovery option in boot menu, can't change wi-fi, bluetooth or connections settings. Will not allow connecting to a phone. Can't reset through the watch itself.
I've tried to connect it to my computer and use Odin. It will connect to my computer using the boot menu option Download wirelessly, but Odin will not see it. The watch keeps saying start Odin. My Note 20 Ultra connects to Odin just fine. So, it's not a firewall issue.
I even went so far as to contact the West Point email address the watch pointed me too. I got a response from a scientist stating that the program is over, and she doesn't have any additional info, or a way to get passed the restrictions. She also said that he wasn't supposed to sell it. Well, great!
Does anyone have any hints, tips, tricks, info, workarounds? The watch is in damn near mint condition. I can get into the developer menu, it will let me run all of the diagnostics, but nothing to do with resetting. I really want to be able to use this.
Thanks for any and all help.
Are you using NetOdin to conmect to your Watch? It is not the same Odin, which is used to connect to phones (like your Note 20 Ultra).
profi_fahrer said:
Are you using NetOdin to conmect to your Watch? It is not the same Odin, which is used to connect to phones (like your Note 20 Ultra).
Click to expand...
Click to collapse
Uhhhh, NOPE! lol I was trying to use plain ol Odin. Well, THAT might be the issue... Since you responded, and seem to have a grasp (this is ALL new to me), how do I know WHICH firmware version that I need? It's a Galaxy Watch 3 SM-R840. What other info would you need? Thank you for this help, so far!
profi_fahrer said:
Are you using NetOdin to conmect to your Watch? It is not the same Odin, which is used to connect to phones (like your Note 20 Ultra).
Click to expand...
Click to collapse
I was able to use Netodin and flash the watch. It worked for a bit, and then knox came back biting. I've been looking for the workaround for this. Do you know the direction to look?
Normally Knox should not be a problem, because you have flashed an official firmware. Maybe you can try a factory reset.
@mobleaudio1
If still unsolved... we could try with Conversation... formally known as Private Message...
Best Regards
Hello I have the same problem, they managed to have a solution, if you can help me please
adfree said:
@ [USER = 11645237] mobleaudio1 [/ USER]
Si aún no se resuelve ... podríamos intentarlo con Conversación ... formalmente conocido como Mensaje Privado ...
Atentam
Click to expand...
Click to collapse
adfree said:
@mobleaudio1
If still unsolved... we could try with Conversation... formally known as Private Message...
Best Regards
Click to expand...
Click to collapse
you know how to solve this problem since I have a problem almost the same