Develop Bugs

[Q] Problem of SMS saving into SIM not phone memory

I have seen this problem creep up a few times in the bug sections but solutions on it are scarce. Having used S8500XPKG6 FW since it's release this problem never showed up until today
Having checked the settings menus and text settings there seems to be no way of solving this? Sorry if this is repeated but I felt it needs a separate section for us to work in.

Many people have had this problem too. But no one has found the solution. The only alternative is to install the firmware again.
ps Forgive my bad english

Hmm I will wait to see what happens when the SIM memory is full..............don't really fancy reflashing the firmware again

zm15011992 said:
I have seen this problem creep up a few times in the bug sections but solutions on it are scarce. Having used S8500XPKG6 FW since it's release this problem never showed up until today
Having checked the settings menus and text settings there seems to be no way of solving this? Sorry if this is repeated but I felt it needs a separate section for us to work in.
Click to expand...
Click to collapse
If you installed the firmware with the original OXA csc, then you should select DBT in pre-configuration setting.
If you created your own csc, then you should select the appropriate csc in pre-Configuration setting.
Try this, and please let me know if it solved your problem.
Best of luck.

A factory reset can solve this. But how long ? I don't know.

Tend to find I hit this problem about 1300 texts every time, and then once SIM is full it shows no messages even though notification comes up. Might be something to do with text limits?

Get the same problem in S8500XPKG7 again at around 1300 limit

[Q] I9082 self off or self restart

Welcome. I have a little problem with SGD. Phone often turns itself off or restarts itself (at least 1-2 times per day). It happens even if is not used (I can hear the sound then restart). I have the original ROM XXAMCD region of TPH but I use the Polish language. Does anyone else have this problem?
PS. sorry for my english

zygzag said:
Welcome. I have a little problem with SGD. Phone often turns itself off or restarts itself (at least 1-2 times per day). It happens even if is not used (I can hear the sound then restart). I have the original ROM XXAMCD region of TPH but I use the Polish language. Does anyone else have this problem?
PS. sorry for my english
Click to expand...
Click to collapse
Install latest firmware and check if the exists or not. Last solution is service center..
Sent from Gt-I9082

Your firmware version is old. The problem will disappear after system update.

Which ROM I can flash to have polish language? May it be XXAME1 from BLG, EUR or SEB?

Some answers? Please

I did not wait for answers, I did it, flashed rom XXAME1 EUR and since last night there is no restart (for now)

May be it restarts because you phone gets heated up.
Sent from my GT-I9082 using xda premium

zygzag said:
Welcome. I have a little problem with SGD. Phone often turns itself off or restarts itself (at least 1-2 times per day). It happens even if is not used (I can hear the sound then restart). I have the original ROM XXAMCD region of TPH but I use the Polish language. Does anyone else have this problem?
PS. sorry for my english
Click to expand...
Click to collapse
if ur rooted then disable root and root again...nd check for radio or system app in superuser..and deny permissions..
maybe it will help..!!

evil22 said:
if ur rooted then disable root and root again...nd check for radio or system app in superuser..and deny permissions..
maybe it will help..!!
Click to expand...
Click to collapse
No, I have no root. Now I have the newest stock XEO ROM but this problem still repeat but occasionally. I observe one thing. My phone still works with 2 SIM card:
1. 3G internet only (Aero2.pl)
2. 2G talks, SMS, MMS (T-mobile.pl)
Always, when I hear starting sound and I get phone it was hot on the rear panel (see below)
Suriya357 said:
May be it restarts because you phone gets heated up.
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
and I don't know why. For few days phone works only with one SIM card in first slot (3G T-mobile, card 2 is off) and no offs or restarts. Maybe when phone works with two cards I must unmark in Settings->SIMcard menaging-> recieve calls by other simcard when data are used"?
PS.sorry for grammar

zygzag said:
No, I have no root. Now I have the newest stock XEO ROM but this problem still repeat but occasionally. I observe one thing. My phone still works with 2 SIM card:
1. 3G internet only (Aero2.pl)
2. 2G talks, SMS, MMS (T-mobile.pl)
Always, when I hear starting sound and I get phone it was hot on the rear panel (see below)
and I don't know why. For few days phone works only with one SIM card in first slot (3G T-mobile, card 2 is off) and no offs or restarts. Maybe when phone works with two cards I must unmark in Settings->SIMcard menaging-> recieve calls by other simcard when data are used"?
PS.sorry for grammar
Click to expand...
Click to collapse
There is absolutely no waya phone restarts becausee of usins sim 2
Try enabling 'do not keep activities' and 'limit background processes' to 'no background processes' in devoloper options.
also clear RAM often by holding the home button and click the 1st button and go to ram no click clear.

solution
Did you find a solution? I have the same problem. If you could write in prv in Polish...

Now I have ME1 ROM and restarts are sometimes, not so many as earlier, but happens. Indeed - it restarts when the phone is hot. Maybe it happens when the phone is synchronizing data? I am nor sure. But it is not burdensome just now. After some weeks (months?) I can tell that this phone is not top of my dreams (my last was SGS II), but I can't found at this moment nothing better then this one, which works with two SIM cards and WCDMA 900Mhz (AERO2 - 3G internet mobile operator works in that frequency for free in Poland). Few weeks earlier I have used ZTE V970 - it was good phone, but not so good like SGGD though some drawbacks.

Same Issue but I don't see how to implement the suggestions being an end-user
I have the same problem (random reboot) but cannot see developer options anymore (I saw it in the past but it seems Samsung locked it, i don't know).
I notice it happens more when I am driving and using Waze or playing music thru Bluetooth in the car speaker. Maybe it gets hot but I am not sure. But my concern is many of the suggestions I cannot implement bacause I am an end user that has not many tools or skills to play with the phone. I am sure I have the last firmware, but the phone keeps rebooting once or twice every couple of days...
It is annoying and makes me feel like I should have bought a proprietary solution like Apple...

Your:
Rom
Firmware
Android Version ?
??Thank Me Up If I Helped You ??

What I see here is:
Model: GT-I9082L
Version: 4.2.2
Base Band: I9082LUBUBND1
Kernel: 3.0.31 - 2659936 [email protected] #1 Tue Apr 29 02:05 KST 2014
Compilation Number: JDQ39.I9082LVJUBND1
I am not sure it answers your questions, but this is all I see in the "About" session.
Thanks!

This is the worst brand of smartphones ever... Samsung Galaxy grand should be shut down!!

[Help]
Hello everyone... this is my first time to post here and im also a new member in this forum and for
information about my self is
im just an ordinary man and dont have some knowledge about phones, softwares and etc. ..
im just hoping that there is someone who can help me regarding about my issue so this is what happens.
I have a phone samsung galaxy grand dous GT-i9082 i have this phone for about 3 years but my phone suddenly not working
properly. There is sometimes my phone works when there is simcard and when days pass it suddenly off and it will stock
in the logo Samsung galaxy Grand Duos GT-i9082. when i off my phone and i will remove my simcard it will work properly again
and then days pass it will do the same. at first it is just ok for me in that rotation of my phone but in this month it gets
worse..when i only put one simcard in sim 1 the same will happened on my phone it will on and in seconds it off directly and so on..
but when i put 2 simcards it will
work properly again and days pass my phone same as always..
i tried the method of factory data reset many times but my phone is still the same. last week im thinking that maybe my phone is outdated
for not upgrading it so i came up my mind to watch a tutorial on how to upgrade my phone jellybean to kitkat. i just flash a new ROM and follow
the steps in the tutorial but the files which is in the tutorial is not working everytime im doing the steps and other files
which website he gave is in error..so i download
another files related to my phone not just 1 but 3 files for my phone just to make sure which one is working.. and last night it work!
my phone got upgraded i got it to explore it for about 30 mins.. but so sad after that it off and it is still the same as always with sim
and without sim
... sorry for my bad english guys.. if there is someone
who can fix my issue im gladly to thanks a lot for your help have a good day everyone!

I too had this problem. It is probably your battery. Change it. Your battery is probably degraded. It cant support the power requirement of mobile hence the mobile shuts down.

Change your battery.
zygzag said:
Welcome. I have a little problem with SGD. Phone often turns itself off or restarts itself (at least 1-2 times per day). It happens even if is not used (I can hear the sound then restart). I have the original ROM XXAMCD region of TPH but I use the Polish language. Does anyone else have this problem?
PS. sorry for my English
Click to expand...
Click to collapse
Buy a new battery for your phone.

My first OP device (OP3), can I check a few things with the Comm

Hey folks
This is the first OP device Ive ever used (OP3).. I bought it BNIB (used once and sold on), but it can from a 2nd hand / Trade in store, Ive looked online but some websites are conflicting between 3000 and 3003 so..
The device model is an A3003.. and Im in UK .. is this the right region?,, I ask because it has 2 sims.. and the UK dont support dual sim yet.
Ive posted my device info.. is it all ok.. and is my device an Unbranded stock UK rom:
Thanks all

A3000 is the Chinese specific version.
A3003 is the EU/Asia/India version
So everything okay i think

Yes everything is fine i am in the UK too and dual Sims are allowed on every major carrier my device is also the a3003 so nothing to worry about

Thanks for the help.. Appreciated.. Im really enjoying it.. It was actually between the 3 and the 3T, but I was going to have to put another £70 for a 3T,,, Im a light to moderate user.. the 3k battery is fine and have no interest in selfies, so I thought ide put that cash towards a GTX 1060 instead
Can I ask, 703 looks like the latest UK rom, which my 3 updated via OTA when i first connected to wifi, but Ive read theres 710 (7.1.1) available if I setup a VPN to canada or germany.. Im not sure what this means?.,

If you want android 7.1.1 then download opera VPN from the play store and change your location to Germany it's easy really there will be a list of countries that you can change to so just select Germany then minimise the app and check for updates you should get a update for android 7.1.1

Thanks alot Xceeder, got that, much appreciated... Can I add.. as soon as the download starts, re-open Opera and disconnect from the VPN... as its agonisingly slow through VPN... but disconnect and the 351MB download in seconds, then do a full factory reset/cache wipe via Recovery to remove VPN and return to your region (UK for me) and all is good again
Thanks

Mi Max Helium strange Sim-Card Behaviour

I own a Mi Max Helium and from the first day I use it with open bootloader and Custom Roms.
After 4 Weeks of using the strange things began:
- I lost network sometimes, but most of the times it was back in seconds. (once or twice a day)
- then randomly the MiMax said there is no sim card installed. Ok reboot phone and everything was okay. (once or twice a day)
- then it happened every hour
- and then sometimes after some hours or some minutes - not replicatable
- as a last step rebooting the phone doesn´t help. I have to kick out the Sim, wait some seconds and put it in again
Ok I thought it was a fault with the custom roms.
Made a real big factory reset with mi flash tool and cleaned the whole phone like a new device after the delivery.
After the first reboot it wasn´t able to find any simcard (IMEI und EFS was okay), so I thought phone or SimCard has a defect.
Took a simcard from my girlfriend - everything was working fine. Took my simcard in the MiMax and curiously everything was working fine
Flashed Xenon HD Custom Rom and everything worked well the last 4 Weeks and now the whole Sh*t begins again in the same way like described above.
Wtf is that behaviour? Can anybody report similar things?
Using SIM-Slot 1 or SIM-Slot 2 makes no difference. Its not logical or reproducible for me

T-Mobile? There has been reports not only fo Mi Max but One Plus X and some other Chinese brands killing particular tipes of T-Mobile sim cards by constantly trying to write on them. Sounds exactly what you are describing.
Solution is call T-Mobile, they know the issue and should replace sim card with the right tipe.

nijel8 said:
T-Mobile?...
Click to expand...
Click to collapse
Interesting. No I´m using a german multiple provider called 1&1 and they use Vodafone D2 Network here.
They also use Telefonica (ePlus & O2), but the reason for that behaviour could be the same. I will call my provider and hope the know similar cases.
Thanks for the advice so far :good:

Well I share you problem I am.from Chile and this started to happen after updating to official ROM 8.2.3.0
I tried for months to find a fix but in the end I've noticed in my country all operators started using 4g band 28 (700mhz aggregation) band is not compatible with my Max prime (helium)
This doesn't explain why the card is lost until rebooting the Phone though.
A good thing is to set auto turn off in security app at 7:00am then enable auto turn on at 7:10 am this way your phone will work in the morning and not lose any important phone calls.
Check out this thread
Do you have any similar symptoms? Can you search for networks manually? I can't
https://forum.xda-developers.com/showthread.php?t=3604428
Sent from my MI MAX using Tapatalk

DJ_Tomato said:
Well I share you problem I am.from Chile and this started to happen after updating to official ROM 8.2.3.0
I tried for months to find a fix but in the end I've noticed in my country all operators started using 4g band 28 (700mhz aggregation) band is not compatible with my Max prime (helium)
This doesn't explain why the card is lost until rebooting the Phone though.
A good thing is to set auto turn off in security app at 7:00am then enable auto turn on at 7:10 am this way your phone will work in the morning and not lose any important phone calls.
Check out this thread
Do you have any similar symptoms? Can you search for networks manually? I can't
https://forum.xda-developers.com/showthread.php?t=3604428
Click to expand...
Click to collapse
Try cleaning the sim card with acetone.

nijel8 said:
T-Mobile? There has been reports not only fo Mi Max but One Plus X and some other Chinese brands killing particular tipes of T-Mobile sim cards by constantly trying to write on them. Sounds exactly what you are describing.
Solution is call T-Mobile, they know the issue and should replace sim card with the right tipe.
Click to expand...
Click to collapse
can you please explain smart cpu efficiency feature in new miui nougat update it will be very helpful I tied to create a port regarding this but can't

Even i had than issue on xenon and aosp extended rom could not able to find workaround so jumped to miui

Anyone running Hong Kong (TGY) firmware on their SM-N9750 (vs Taiwan (BRI)?)

I switched to the N9750 from a Galaxy S9+ (SM-G9650) from the same "family" (Hong Kong & Snapdragon) because I was so pleased with many of the firmware customizations present in the S9+, including the Hiya integration in the stock Dialer app. (You know it's there if there is a "Places" tab and if a contact search also searches businesses in your area.)
However, my N9750 sadly did not come with this feature, but I did notice that there is a second region option for this model (namely my beloved Hong Kong!)
Can anyone running the Hong Kong firmware comment on whether Hiya integration is there or not?
TIA!

waqqas.khokhar said:
I switched to the N9750 from a Galaxy S9+ (SM-G9650) from the same "family" (Hong Kong & Snapdragon) because I was so pleased with many of the firmware customizations present in the S9+, including the Hiya integration in the stock Dialer app. (You know it's there if there is a "Places" tab and if a contact search also searches businesses in your area.)
However, my N9750 sadly did not come with this feature, but I did notice that there is a second region option for this model (namely my beloved Hong Kong!)
Can anyone running the Hong Kong firmware comment on whether Hiya integration is there or not?
TIA!
Click to expand...
Click to collapse
N9750(BRI) have hiya service

zjhao said:
N9750(BRI) have hiya service
Click to expand...
Click to collapse
Really? Can you share a screenshot?

waqqas.khokhar said:
Really? Can you share a screenshot?
Click to expand...
Click to collapse
here

zjhao said:
here
Click to expand...
Click to collapse
Thank you. I checked my apps list and the Hiya service is not there, which is strange. I'm wondering if it is only installed for certain locales when the phone is initially set up?

Well, I've tried resetting my device to both TGY and BRI firmware (though they both show up the same in "About Phone") and I tried different locales in each, but still no sign of Hiya. I'll just hope that it shows up in a later update. It is even advertised by Samsung as "Smart Call" on their global and Canadian websites.

waqqas.khokhar said:
Well, I've tried resetting my device to both TGY and BRI firmware (though they both show up the same in "About Phone") and I tried different locales in each, but still no sign of Hiya. I'll just hope that it shows up in a later update. It is even advertised by Samsung as "Smart Call" on their global and Canadian websites.
Click to expand...
Click to collapse
Out of topic. I also have a BRI N9750, I am wondering how do you manage to reset to TGY. I also do not see Hiya services on my BRI N9750

meowone said:
Out of topic. I also have a BRI N9750, I am wondering how do you manage to reset to TGY. I also do not see Hiya services on my BRI N9750
Click to expand...
Click to collapse
I should have used the correct terminology. I did a full reset and then flashed the TGY firmware. The two firmware files (BRI and TGY) were exactly the same size, so it was of little surprise that there was no difference as far as Hiya was concerned.
However, even though Hiya was not in my list of apps, when I searched my entire Settings for it, it did show up in my system apps, as did Smart Call. So both services are there, but they just don't seem to be implemented with the current phone app bundled with these firmware releases.
One thing to note about the TGY firmware (before anyone else takes the plunge) was that my signal bars dropped from 4-5 to just 1. I let the phone be for a good 10 minutes and this did not change. When I flashed back to BRI, the bars started off at 1, but then quickly reverted to 3 then 4. It could have been serendipity, but I can't say for sure...

waqqas.khokhar said:
I should have used the correct terminology. I did a full reset and then flashed the TGY firmware. The two firmware files (BRI and TGY) were exactly the same size, so it was of little surprise that there was no difference as far as Hiya was concerned.
However, even though Hiya was not in my list of apps, when I searched my entire Settings for it, it did show up in my system apps, as did Smart Call. So both services are there, but they just don't seem to be implemented with the current phone app bundled with these firmware releases.
One thing to note about the TGY firmware (before anyone else takes the plunge) was that my signal bars dropped from 4-5 to just 1. I let the phone be for a good 10 minutes and this did not change. When I flashed back to BRI, the bars started off at 1, but then quickly reverted to 3 then 4. It could have been serendipity, but I can't say for sure...
Click to expand...
Click to collapse
I see, based on my experience with multi CSC firmware, BRI and TGY firmware are the same with multiple CSC included and it will only switch CSC when the correct sim is inserted. So no matter how many times you flash the firmware, it will stay the same CSC unless you are able to find workarounds.
To answer your question on Hiya, I believe it's also CSC dependent. The services are in the firmware (I have just searched), but it will only be active when the correct CSC is activated. I have been trying to find ways to switch to the TGY CSC to get Places and Smart Octopus but there isn't any working method yet. The Smart Call is advertised as a regional feature (you can find that statement the fine print) and I believe Hiya isn't available in Taiwan. It is available in HK so if the phone has TGY CSC it will might activate Smart Call and Places (since it is advertised in the HK Samsung page)

meowone said:
I see, based on my experience with multi CSC firmware, BRI and TGY firmware are the same with multiple CSC included and it will only switch CSC when the correct sim is inserted. So no matter how many times you flash the firmware, it will stay the same CSC unless you are able to find workarounds.
To answer your question on Hiya, I believe it's also CSC dependent. The services are in the firmware (I have just searched), but it will only be active when the correct CSC is activated. I have been trying to find ways to switch to the TGY CSC to get Places and Smart Octopus but there isn't any working method yet. The Smart Call is advertised as a regional feature (you can find that statement the fine print) and I believe Hiya isn't available in Taiwan. It is available in HK so if the phone has TGY CSC it will might activate Smart Call and Places (since it is advertised in the HK Samsung page)
Click to expand...
Click to collapse
I even tried the Samkey method and I got a "This model is NOT supported for CSC Change" error, even though the Samkey website mentioned the SM-N9750 as a supported model. I emailed the dev for clarification.

waqqas.khokhar said:
I even tried the Samkey method and I got a "This model is NOT supported for CSC Change" error, even though the Samkey website mentioned the SM-N9750 as a supported model. I emailed the dev for clarification.
Click to expand...
Click to collapse
I went through Samkey as well and got the same results and also email the dev. Looks like the only way is to switch to TGY right now is to get a provisioned hk sim.

meowone said:
I see, based on my experience with multi CSC firmware, BRI and TGY firmware are the same with multiple CSC included and it will only switch CSC when the correct sim is inserted. So no matter how many times you flash the firmware, it will stay the same CSC unless you are able to find workarounds.
To answer your question on Hiya, I believe it's also CSC dependent. The services are in the firmware (I have just searched), but it will only be active when the correct CSC is activated. I have been trying to find ways to switch to the TGY CSC to get Places and Smart Octopus but there isn't any working method yet. The Smart Call is advertised as a regional feature (you can find that statement the fine print) and I believe Hiya isn't available in Taiwan. It is available in HK so if the phone has TGY CSC it will might activate Smart Call and Places (since it is advertised in the HK Samsung page)
Click to expand...
Click to collapse
meowone said:
I went through Samkey as well and got the same results and also email the dev. Looks like the only way is to switch to TGY right now is to get a provisioned hk sim.
Click to expand...
Click to collapse
So, an inactive SIM won't even do? So much for that idea

waqqas.khokhar said:
So, an inactive SIM won't even do? So much for that idea
Click to expand...
Click to collapse
I tried that lol since I got one lying around and it keep asking for provision and it didn't change CSC.

My N9750 (I'm using it on T-Mobile in the US) has Hiya support. Volte and WiFi calling are also working. I'm on the Taiwan (BRI) CSC.

ajsmsg78 said:
My N9750 (I'm using it on T-Mobile in the US) has Hiya support. Volte and WiFi calling are also working. I'm on the Taiwan (BRI) CSC.
Click to expand...
Click to collapse
Not to sound like I'm doubting you, but do you have the "Places" tab in your Phone app? Can you share a screenshot? Lastly, did you activate with the same t-mobile USA SIM card?

meowone said:
I tried that lol since I got one lying around and it keep asking for provision and it didn't change CSC.
Click to expand...
Click to collapse
SamKey 2.20.2 is out and IT WORKS! Go get 'em!
(I would have posted a screenshot but as per the procedure, my phone is almost blank and I'm still in the process of setting it back up--hopefully for the last time in a while!)

waqqas.khokhar said:
SamKey 2.20.2 is out and IT WORKS! Go get 'em!
(I would have posted a screenshot but as per the procedure, my phone is almost blank and I'm still in the process of setting it back up--hopefully for the last time in a while!)
Click to expand...
Click to collapse
Nice, thanks for the headsup. Going to try it after back up.

Does anyone know which CSC on N9750 has the native call recording?
Sent from my GM1917 using Tapatalk

Abu-khulzat said:
Does anyone know which CSC on N9750 has the native call recording?
Click to expand...
Click to collapse
Neither CSC has native call recording.

meowone said:
Neither CSC has native call recording.
Click to expand...
Click to collapse
ops I just got mine and was surprised HK version didn't had call recording! so, they removed it completely then!
Anyone has any solution for call recording with acceptable quality?
I think they removed network speed in status bar also completely!