Hi, i was trying to find out if I could be connected to WiFi with ny nexus 7 and then use a Hotspot to broadcast the WiFi I am connected to. The reason I want to do this is because my ps4 is blocked on the router so I wanted to try this to get around it. Any help is appreciated.
JazzieBoi said:
Hi, i was trying to find out if I could be connected to WiFi with ny nexus 7 and then use a Hotspot to broadcast the WiFi I am connected to. The reason I want to do this is because my ps4 is blocked on the router so I wanted to try this to get around it. Any help is appreciated.
Click to expand...
Click to collapse
You can't do it this way because when you broadcast WiFi, you disconnect from any WiFi you were previously connected to.
If you have a spare router, you can connect it to 'the router' using an ethernet cable and use it as an access point.
Anyone succeed in enabling Internet via Bluetooth? I know i can setup the wifi tether and I have tasker doing that now on Bluetooth connect... BUT that drains the batteries...
I can connect my tablet to the internet via bluetooth why not my car stereo?
MTCB running latest 4.4.x firmware...
dpackham said:
Anyone succeed in enabling Internet via Bluetooth? I know i can setup the wifi tether and I have tasker doing that now on Bluetooth connect... BUT that drains the batteries...
I can connect my tablet to the internet via bluetooth why not my car stereo?
MTCB running latest 4.4.x firmware...
Click to expand...
Click to collapse
would love this. Android N killed my wifi hotspot..so bluetooth tethering would be great.
Hi guys, I try to figured out if it's possible to connect a 4G USB Dongle to have internet without Wifi.
I see a lot of you use the Huawei e8372 or E5573. My question is about using one of these (or something else cheaper) without Wifi, and directly through USB. Is it possible?
cheers
btrax said:
Hi guys, I try to figured out if it's possible to connect a 4G USB Dongle to have internet without Wifi.
I see a lot of you use the Huawei e8372 or E5573. My question is about using one of these (or something else cheaper) without Wifi, and directly through USB. Is it possible?
cheers
Click to expand...
Click to collapse
I don't know about your unit but should be no problem. Get mobile data SIM card from your provider and set connection as per modem instructions. Like your mobile phone. Ask your provider for details about plans and prices.
Sent from my SM-G935F using Tapatalk
Hello guys how are you?
Recently I bought a Dasaita PX6 Android 10 for my Toyota CHR. Camera working OK, Sound OK... but I have a problem with WIFI connection.
As soon as setup my phone as hotspot, I search that WIFI on DASAITA. I find it and connect to it but as soon as IP address is raised WIFI turns off automatically.
Here I show you a video of the problem:
youtube.com/watch?v=akjF7q0NvJc&feature=youtu.be&spm=a2g0s.imconversation.0.0.560b3e5f2rShbE
Thanks
I had the same issue. I think it has to do with the Zlink app which tries to put the HA in hotspot mode. I managed to switch on wifi after closing the Zlink app manually and disabling the hotspot in the dropdown menu(the icons which appear if you swipe down from the top of the screen). Unfortunately the wifi connection with the hotspot of my iPhone is nog always stable. Sometimes it disconnects after a couple of minutes.
SYoung said:
I had the same issue. I think it has to do with the Zlink app which tries to put the HA in hotspot mode. I managed to switch on wifi after closing the Zlink app manually and disabling the hotspot in the dropdown menu(the icons which appear if you swipe down from the top of the screen). Unfortunately the wifi connection with the hotspot of my iPhone is nog always stable. Sometimes it disconnects after a couple of minutes.
Click to expand...
Click to collapse
Thanks for your reply.
If you saw the video I linked I have closed all apps and the problem is still there. I don't know what happens
CyrusMzRG said:
Thanks for your reply.
If you saw the video I linked I have closed all apps and the problem is still there. I don't know what happens
Click to expand...
Click to collapse
Yes, a saw that, but as far as I can see, you did not disable the hotspot before turning on wifi. I needed to do that as well.
SYoung said:
Yes, a saw that, but as far as I can see, you did not disable the hotspot before turning on wifi. I needed to do that as well.
Click to expand...
Click to collapse
I think as soon as wifi is set to ON, hotspot turns off automatically. It can be shown also on the video.
Actually I use CAR PLAY but I would like to swap between both options with no connection problems :crying:
I thought my suggested method worked, but today it did not work for me either. I agree with you that this is quite annoying. Hopefully someone else can help us out.
i have same issue... looking forward to somebody do a stable update that solve this problem
I have this unit. What works for me is to use usb hookup for CarPlay, then you can use phone hotspot on radios WiFi. You have to turn WiFi on a few times after connecting phone through usb for it to stick. For wireless CarPlay, the radio uses the WiFi resources and turns off selectable WiFi.
Sent from my iPad using Tapatalk
the problem for me is that my iphone is not connect well to the bluetooth of the Dasaita, the issue is that i can't answer or make a call through the Dasaita (android)..... When i'm able to connect to BT and the Zlink start then the BT disconnects, when switch shut down Zlink app BT won't connect anymore
CyrusMzRG said:
I think as soon as wifi is set to ON, hotspot turns off automatically. It can be shown also on the video.
Actually I use CAR PLAY but I would like to swap between both options with no connection problems :crying:
Click to expand...
Click to collapse
I think Syoung (above) is correct.
Obviously you can't run hotspot and wifi at the same time. It's one or the other.
If watch the video closely, the hotspot is off. As soon as wifi is turned on and the phone connects SOMETHING turns the hotspot on (you can see it getting turned on at the 19 second mark in the video), which in turn shuts off the wifi.
Maybe try completely disabling hotspot and see what happens
Well. I tried to connect the iPhone to the car via USB cable to launch CARPLAY. I think my car USB port that actually y also connected to DAISATA doesn’t support CARPLAY. Maybe I need to connect another cable to the back of DASAITA module to make it work.
In addition about the HOTSPOT. The DAISATA HOTSPOT is automatically set to ON to link with iPhone CarPlay.
If I turn it off as soon as my iPhone is near (also set use with CarPlay) hotspot back to ON and CARPLAY IS LINKED AND LAUNCHED.
Do you know if I need to use another cable connected to usb connector located in the back of DAISATA??
Thanks
Hello again. This is what I did and noticed:
- Car usb socket (connected to Daisata) doesn't work with USB CARPLAY.
- I connect the extra usb port to DAISATA.
- CARPLAY via USB working OK on that port.
- If using WIRELESS CARPLAY, Dasaita acts as hotspot creating a WIFI network where iPhone connects automatically.
- Now... I connect the iPhone to the new USB port for CARPLAY ( working ok and connecting faster). I disabled Hotspot from DASAITA. I turned ON WIFI and connect Dasaita to my iPhone hotspot . ALL OK.
So as somebody said is not possible use WIRELESS CAR PLAY and also have WIFI on Dasaita software.
I think connecting the iPhone to the new port we have the 2 connections ( car play and wifi) and on the other hand we can recharge the iPhone.
BUT.... now I need to solve another problem. I don't know why I need to switch off the Hotspot on iPhone each time I want The Daisata connects to the iPhone Hotspot. If I leave the hotspot always ON ( as it MUST BE) the wIFI that iPhone creates doesn't appear on DAISATA. As soon as I switch OFF then ON DAISATA connects in 1 sec to my iPhone
Best regards
CyrusMzRG said:
Hello again. This is what I did and noticed:
- Car usb socket (connected to Daisata) doesn't work with USB CARPLAY.
- I connect the extra usb port to DAISATA.
- CARPLAY via USB working OK on that port.
- If using WIRELESS CARPLAY, Dasaita acts as hotspot creating a WIFI network where iPhone connects automatically.
- Now... I connect the iPhone to the new USB port for CARPLAY ( working ok and connecting faster). I disabled Hotspot from DASAITA. I turned ON WIFI and connect Dasaita to my iPhone hotspot . ALL OK.
So as somebody said is not possible use WIRELESS CAR PLAY and also have WIFI on Dasaita software.
I think connecting the iPhone to the new port we have the 2 connections ( car play and wifi) and on the other hand we can recharge the iPhone.
BUT.... now I need to solve another problem. I don't know why I need to switch off the Hotspot on iPhone each time I want The Daisata connects to the iPhone Hotspot. If I leave the hotspot always ON ( as it MUST BE) the wIFI that iPhone creates doesn't appear on DAISATA. As soon as I switch OFF then ON DAISATA connects in 1 sec to my iPhone
Best regards
Click to expand...
Click to collapse
I went into the zlink app preferences and turned off autoload and control system settings. This seems to stop zlink from turning everything back on when you turn it off. Been working for a few days. I do not however use android auto. You would need to play with the app to see how it functions without those permissions.
Hello,
I couldn't make the switch to wifi on. It kept going off. Tried your help, nothing worked.
What helped me today was a complete "power off". A restart.
It's working now.
Hi, I have a Dasaita PX6 with Max10, I have same issue, i have an iPhone 13 Pro Max, I don't know what to do, I can't solve, could you help me? Thank you in advance
I had a similar issue. I recently purchased a Dasaita HD5367-H10 unit and I've been having some trouble with the WiFi.
When the unit turns on, the WiFi turns on and it connects to my phone's hotspot. Shortly after it connects, the WiFi turns off and I have to manually turn it on again. This only happens once upon boot up and it works fine for the rest of the duration. Once I restart the unit, the issue occurs again.
I think I found a workaround. Disabling ZLink from the Factory Settings menu seems to "fix" the problem, but now the ZLink daemon service is not working.
Hello people,
hopefully i am in the right Thread.
I am using now for few days a LTE 4G (from AliExpress) Stick in my car.
Its connected to the USB Port of my Pumpkin Radio.
After few minutes the App EasyConnection-CarbitLink starts and the Stick is NOT connecting to the internet and the WiFi is not enabled. This is very annoying.
So i have to forceclose this app EVERYTIME when i am turning on the engine of my car.
But even then the Stick lose ,while driving, sometimes the connection to the internet and Wifi.
I already tried the Stick at home and have no problems.
Any recommendations?
Hi, mobile-freak.
I also suffered this same problem altought it happened with a Huawei dongle.
The problem is: dongle tries to comunicate by the usb port with HU, but there´s not compatibility in communication.
The only thing you have to do is connect the dongle to a 5V universal usb charger and dongle will connect to the ISP and will establish a wifi network to which you´ll be able to connect without more problems.
This way, EasyConnection will not start.
I got one with WiFi and 4G, USB is only used for power. So I connect with WiFi from the HU to the dongle.