-Dial: ##634#
-Press the "call" button
-On the MFG screen input this password: 277634#*# and press enter. Now the MFG icon is listed on the "programs list".
-Now you can access to many options, tests.....
i.e.
-You can enable Tethering: download modem drivers here: (ops..I cannot put the link...try to find "PilotesLGe900.exe" driver by your own.... )
- Switch off data connections.
-Enter "Engineer menu"-->"Port settings"-->"USB Switching"-->"QC composite"
-Reboot
-Link smartphone to pc via USB cable.
-Autoinstalling of drivers.
-Into your pc select "modem settings"
-Add: + CGDCONT = 1, “IP”, “orange” (or other for your operator).
-Create "new modem connection" with this number: *99#
-On the smartphone, under "USB Switching" select "MS.." again.
-Enable data connection
i have tried this on my optimus and the password does not work
my phone came from vodafone and is on there network
edited the site i read the password from had a . after the last hash confirmed working on voda fone optimus thanks
No network Service
I'm using Lg optimus 7 for the past 6 months...Had no problem but suddenly before a week i could find no network in my phone but the SIM card works perfectly in al d other fones...Is my mobile is sim locked? when i go to settings>>about>>under the phone information the CARRIER is OPEN!
NOTE
1. I'm able to retrive the contacts from the sim(i.e the sim slot is working)
2. I'm experiencing this problem only when I tried to unlock my device in order to use XAP apps(DFT BT file transfer), I hava a doubt if Microsoft has blocked me or something...
3. I tried factory reset too but still the problem exists..!
Pls somebody help me out to resolve.....THNX
Ganesh Kannan said:
I'm using Lg optimus 7 for the past 6 months...Had no problem but suddenly before a week i could find no network in my phone but the SIM card works perfectly in al d other fones...Is my mobile is sim locked? when i go to settings>>about>>under the phone information the CARRIER is OPEN!
NOTE
1. I'm able to retrive the contacts from the sim(i.e the sim slot is working)
2. I'm experiencing this problem only when I tried to unlock my device in order to use XAP apps(DFT BT file transfer), I hava a doubt if Microsoft has blocked me or something...
3. I tried factory reset too but still the problem exists..!
Pls somebody help me out to resolve.....THNX
Click to expand...
Click to collapse
pls
ihave big trouble
my lg e900h imade update to wp7.5 and that download too late i make stop and resume after finished update i found tha my phone never her any one ecxept head phone or speaker fone only after that i make downgrade to wp7 and make another update to v 7.10.7720.68 aim found after that update the same trouble in my lg pls told me is that bad microphone hardware or bad software
:
[email protected]
khaled
hello guys, my device is galaxy note 2, i updated my phone to android 4.3 manually, the update is successful, i got all the features of the new firmware, but i have a problem: the network connection signal is appearing normally but i can't do any call or send/receive a massage it says (not registered on network), no problems with the device's IMEI, is it because the room is not for my region?? or modem file problem? an help please
bilalmaskaleh said:
hello guys, my device is galaxy note 2, i updated my phone to android 4.3 manually, the update is successful, i got all the features of the new firmware, but i have a problem: the network connection signal is appearing normally but i can't do any call or send/receive a massage it says (not registered on network), no problems with the device's IMEI, is it because the room is not for my region?? or modem file problem? an help please
Click to expand...
Click to collapse
BTW you should post in Galaxy Note 2 Q&A forum ( use xda device search engine to locate it)
A modem change might give you results only after you have checked your APN ,
Quick Guide
First Check your settings > about phone > status > your phone number ( IF UNKNOWN )
You won't be able to send SMS by any third party sms apps or Have a Network connection
Solution :-
You need to edit that "unknown" number to your phone number, by putting your SIM card on any old phone that has a "my number/owner number" option, (most old phones do). Edit and save it to the proper phone format as your Sim Card number (Example: +63913XXXXXXX). Now put the SIM back to M110S, to solve this problem.
Than check your system settings, in Settings > Wireless & Networks > Mobile Networks > Access Point Names.(APN) as provided by your Network provider . If your Apn is not set, you wont be able to have data connection, so set it first
If still no data connection, Common Trick is to toggle WIFI and Airplane mode or
1. Turn ON WIFI
2. Set the phone to Flight Mode
3. Power down the phone for a few Minutes
4. Power it back up
5. Turn OFF flight mode
6. Turn OFF WIFI
Should get Data back
also read this
Check this out! Links to useful Guides and " Banned " Documentaries
Hello.
Is there any way to enable LTE on Orange on P605? I have bussines everywhere card and I am in the range of LTE network, but when I've inserted card to my sexy P605 it only shows HSDPA network. I have contacted Samsung helpdesk and they told me that this Tablet was released when Orange was not a LTE provider so I must wait for an update od Note's software to be able to use LTE.
Finaly...
Maybe there is a way to modify some configuration file to tell my Note that Orange is LTE ready? Best way would be not to root my Note :S
If you know which file should I edit or what actions must I do I would be gratful.
Best Regards.
Problem solved. How did i do it without root?
1. Install "Advanced Signal Status" from play store
2. In application enter:Additional Info -> Device Information
3. change settings to: "LTE/GSM auto (PRL)"
4. Restart your Note and wait a little.
Ready
I've spent 3 days trying to enable GSM and LTE bands in my Swift following this guide from here. But when I try to use the QPST, the software does not recognize my device.
Does anyone knows the secret code to enter in the USB Settings? I've tried a lot of them but without success.
My steps were:
Unlock the OEM - check
Install CyanogemMOD 13 (6.0.1. Marshmallow) - check
Enable Developer Options and enable debugging and Root Access (I couldnt install SuperSU coz I got bootloop twice) - check
Access to USB Settings to change from AP to CP - uncheck
Does anybody knows how to proceed?
I'm from Brazil and I really need to add new bands to get a better signal reception for GSM and the right band for LTE (700Mhz).
Anyone?
I just need the secret code to enable the usb settings.
The problem was my carrier and not the phone.
I've changed the carrier and boom... 4G working nicely.
Hi,
Other phone models can use EFS Tool, QPST tool to do all the mentioned tasks.
And some phones to do that requires rooting phone since they dont have Engineering mode, and some with Engineering mode support doesnt need rooting to use the mentioned tools for example OnePlus phone.
So my question, does LG phone also has this thing called Engineering mode? since LG wing is not supported for bootloader unlocking by LG yet.
Anyone has more experience with LG phone and perhaps the mentioned tool can shed some lights on the concern? Thanks.
Goid app. Well made
on LM-F100EMW,
1) use dialer code #*462633*#100#
2) go to Field Test > LTE Data Test > Tethering Mode, and select QMICM
3) go all the way back to first menu and go to SVC Menu> Port Check Test> Port Check Test and select enable
after that I am able to connect QPST. I used EFS explorer to fix CA-combos and carrier policy for my region/provider.
After doing your work, revert the changes to have a regular USB connection!!
for VOLTE first try to
1) make a new file or folder with name "enable_ue" (without quotes) on your phone's internal storage.
2) use dialer code #*462633*#100#
3) go to Field Test> Universal Enabler > Create New Config , enable VoLTE and confirm.
to add VOLTE indicator next to battery and signal strength on notification bar
1) use dialer code #*462633*#100#
2) go to Field Test > GPRI VoLTE/VoWiFi > IMS> select Sim Slot > Registration > VoLTE > and enable VoLTE Indication.
after all these
1) use dialer code #*462633*#100#
2) go to Field Test> IMS Settings> select Sim Slot > Test > Restart IMS process > select Yes
now you should have VoLTE enabled with notification bar indication
rigasLee said:
on LM-F100EMW,
1) use dialer code #*462633*#100#
2) go to Field Test > LTE Data Test > Tethering Mode, and select QMICM
3) go all the way back to first menu and go to SVC Menu> Port Check Test> Port Check Test and select enable
after that I am able to connect QPST. I used EFS explorer to fix CA-combos and carrier policy for my region/provider.
After doing your work, revert the changes to have a regular USB connection!!
Click to expand...
Click to collapse
rigasLee said:
on LM-F100EMW,
1) use dialer code #*462633*#100#
2) go to Field Test > LTE Data Test > Tethering Mode, and select QMICM
3) go all the way back to first menu and go to SVC Menu> Port Check Test> Port Check Test and select enable
after that I am able to connect QPST. I used EFS explorer to fix CA-combos and carrier policy for my region/provider.
After doing your work, revert the changes to have a regular USB connection!!
Click to expand...
Click to collapse
This is a good write up!Thanks for this!But,what modifications are you making in EFS Explorer to fix CA-combos and the carrier policies?I have a T-Mobile branded Wing,and I'm trying to enable VoLTE AND VoWifi for AT&T since this 3g shutdown went in effect?Mostly conerned with the VoLTE part because I can't make voice calls without it.Thanks for your help.
surgemanx said:
This is a good write up!Thanks for this!But,what modifications are you making in EFS Explorer to fix CA-combos and the carrier policies?I have a T-Mobile branded Wing,and I'm trying to enable VoLTE AND VoWifi for AT&T since this 3g shutdown went in effect?Mostly conerned with the VoLTE part because I can't make voice calls without it.Thanks for your help.
Click to expand...
Click to collapse
For volte i didnt change anything from EFS.
The changes i did in EFS was to add 5G for any carrier, because my carrier was not supported, and also to take the CA string from another phone's firmware, that my carrier has good support, and paste it where the outdated ca string was inside my wing's EFS.
rigasLee said:
For volte i didnt change anything from EFS.
The changes i did in EFS was to add 5G for any carrier, because my carrier was not supported, and also to take the CA string from another phone's firmware, that my carrier has good support, and paste it where the outdated ca string was inside my wing's EFS.
Click to expand...
Click to collapse
Okay thank!I've been trying to get this to work for 2 days now,and so far no go.I have even tried loading the mbn files with PDC and still no luck...
surgemanx said:
Okay thank!I've been trying to get this to work for 2 days now,and so far no go.I have even tried loading the mbn files with PDC and still no luck...
Click to expand...
Click to collapse
Try to extract and load .mbn file from T-mobile's firmware
rigasLee said:
Try to extract and load .mbn file from T-mobile's firmware
Click to expand...
Click to collapse
I'm on T-Mobile firmware,and I have tried and no go.If you extract modem_a or modem_b from the firmware it has all the carriers listed.
Hi. I have LG wing unlocked dual sim. But not getting volte. Tried the hidden menu option. It is showing in settings but looks ims not registered. Can you tell if you were able to get Volte on LG Wing without mbn loading. Also if mbn loading is needed, what is the process and where do you find the files for LG wing Malaysia carriers that I can use. I have another Samsung phone and that is fully volte supported. Can I copy something from it?
fuadhdmini said:
Hi,
Other phone models can use EFS Tool, QPST tool to do all the mentioned tasks.
And some phones to do that requires rooting phone since they dont have Engineering mode, and some with Engineering mode support doesnt need rooting to use the mentioned tools for example OnePlus phone.
So my question, does LG phone also has this thing called Engineering mode? since LG wing is not supported for bootloader unlocking by LG yet.
Anyone has more experience with LG phone and perhaps the mentioned tool can shed some lights on the concern? Thanks.
Click to expand...
Click to collapse
Were you able to get volte enabled on lg wing? I use this set in Malaysia.
rigasLee said:
for VOLTE first try to
1) make a new file or folder with name "enable_ue" (without quotes) on your phone's internal storage.
2) use dialer code #*462633*#100#
3) go to Field Test> Universal Enabler > Create New Config , enable VoLTE and confirm.
to add VOLTE indicator next to battery and signal strength on notification bar
1) use dialer code #*462633*#100#
2) go to Field Test > GPRI VoLTE/VoWiFi > IMS> select Sim Slot > Registration > VoLTE > and enable VoLTE Indication.
after all these
1) use dialer code #*462633*#100#
2) go to Field Test> IMS Settings> select Sim Slot > Test > Restart IMS process > select Yes
now you should have VoLTE enabled with notification bar indication
Click to expand...
Click to collapse
When i go to field test and click on ims settings it is showing not supported. I formated my phone and it became like this. Before formatting it used to work and I could see ims settings. My phone I bought from a shop and the shop keeper sent it rooted. Thatd when IMS settings were working..but after I did a reset saying not supported. How to bring it back?
surgemanx said:
This is a good write up!Thanks for this!But,what modifications are you making in EFS Explorer to fix CA-combos and the carrier policies?I have a T-Mobile branded Wing,and I'm trying to enable VoLTE AND VoWifi for AT&T since this 3g shutdown went in effect?Mostly conerned with the VoLTE part because I can't make voice calls without it.Thanks for your help.
Click to expand...
Click to collapse
Where are you located and what condition is your phone in? I've got an AT&T branded phone but I'm on TMO...maybe we can switch!
When I go to field menu in my Lg Wing, I go to IMS settings, it is completely blank. Someone please help me in registering the Volte in my Lg Wing. I am already rooted by able to patch the stock boot.img using magisk. My phone came with an unlocked bootloader and its the European firmware. I am trying to use this phone in Asia (Malaysia). Surprisingly, when I got the phone from the seller, it was not enabled volte but IMS settings in field menu would also show up (unlike now when I go there and it is blank), and also surprisingly, my volte worked also but by mistake I formatted my phone and after that it never worked. I then tried to flash the stock firmware and did root, installed voenabler but nothing seems to be helping.
I even tried loading mbn files of different carriers via PDC but no help. IMS settings always stay blank and volte doesn't get activated. Such a good phone but not able to work because my carrier here only supports volte.
If someone has an interest in helping, will be great.
How to edit CA String.
jazbaesu said:
When I go to field menu in my Lg Wing, I go to IMS settings, it is completely blank. Someone please help me in registering the Volte in my Lg Wing. I am already rooted by able to patch the stock boot.img using magisk. My phone came with an unlocked bootloader and its the European firmware. I am trying to use this phone in Asia (Malaysia). Surprisingly, when I got the phone from the seller, it was not enabled volte but IMS settings in field menu would also show up (unlike now when I go there and it is blank), and also surprisingly, my volte worked also but by mistake I formatted my phone and after that it never worked. I then tried to flash the stock firmware and did root, installed voenabler but nothing seems to be helping.
I even tried loading mbn files of different carriers via PDC but no help. IMS settings always stay blank and volte doesn't get activated. Such a good phone but not able to work because my carrier here only supports volte.
If someone has an interest in helping, will be great.
Click to expand...
Click to collapse
Lg g8x,g8,v60 Volte enable for all carriers, unlisted countries also
I will try to keep this post as small as possible. This will enable Volte for Phone ranging from Lg g8x, g8 and V60 without root or modifying the system files. Many have posted ways to get it, Iam only trying to help out the small bits missing...
forum.xda-developers.com
so i can just change my nt code to eu open with a korean firmware and volte and 5g starts working?