Hi,
Other phone models can use EFS Tool, QPST tool to do all the mentioned tasks.
And some phones to do that requires rooting phone since they dont have Engineering mode, and some with Engineering mode support doesnt need rooting to use the mentioned tools for example OnePlus phone.
So my question, does LG phone also has this thing called Engineering mode? since LG wing is not supported for bootloader unlocking by LG yet.
Anyone has more experience with LG phone and perhaps the mentioned tool can shed some lights on the concern? Thanks.
Goid app. Well made
on LM-F100EMW,
1) use dialer code #*462633*#100#
2) go to Field Test > LTE Data Test > Tethering Mode, and select QMICM
3) go all the way back to first menu and go to SVC Menu> Port Check Test> Port Check Test and select enable
after that I am able to connect QPST. I used EFS explorer to fix CA-combos and carrier policy for my region/provider.
After doing your work, revert the changes to have a regular USB connection!!
for VOLTE first try to
1) make a new file or folder with name "enable_ue" (without quotes) on your phone's internal storage.
2) use dialer code #*462633*#100#
3) go to Field Test> Universal Enabler > Create New Config , enable VoLTE and confirm.
to add VOLTE indicator next to battery and signal strength on notification bar
1) use dialer code #*462633*#100#
2) go to Field Test > GPRI VoLTE/VoWiFi > IMS> select Sim Slot > Registration > VoLTE > and enable VoLTE Indication.
after all these
1) use dialer code #*462633*#100#
2) go to Field Test> IMS Settings> select Sim Slot > Test > Restart IMS process > select Yes
now you should have VoLTE enabled with notification bar indication
rigasLee said:
on LM-F100EMW,
1) use dialer code #*462633*#100#
2) go to Field Test > LTE Data Test > Tethering Mode, and select QMICM
3) go all the way back to first menu and go to SVC Menu> Port Check Test> Port Check Test and select enable
after that I am able to connect QPST. I used EFS explorer to fix CA-combos and carrier policy for my region/provider.
After doing your work, revert the changes to have a regular USB connection!!
Click to expand...
Click to collapse
rigasLee said:
on LM-F100EMW,
1) use dialer code #*462633*#100#
2) go to Field Test > LTE Data Test > Tethering Mode, and select QMICM
3) go all the way back to first menu and go to SVC Menu> Port Check Test> Port Check Test and select enable
after that I am able to connect QPST. I used EFS explorer to fix CA-combos and carrier policy for my region/provider.
After doing your work, revert the changes to have a regular USB connection!!
Click to expand...
Click to collapse
This is a good write up!Thanks for this!But,what modifications are you making in EFS Explorer to fix CA-combos and the carrier policies?I have a T-Mobile branded Wing,and I'm trying to enable VoLTE AND VoWifi for AT&T since this 3g shutdown went in effect?Mostly conerned with the VoLTE part because I can't make voice calls without it.Thanks for your help.
surgemanx said:
This is a good write up!Thanks for this!But,what modifications are you making in EFS Explorer to fix CA-combos and the carrier policies?I have a T-Mobile branded Wing,and I'm trying to enable VoLTE AND VoWifi for AT&T since this 3g shutdown went in effect?Mostly conerned with the VoLTE part because I can't make voice calls without it.Thanks for your help.
Click to expand...
Click to collapse
For volte i didnt change anything from EFS.
The changes i did in EFS was to add 5G for any carrier, because my carrier was not supported, and also to take the CA string from another phone's firmware, that my carrier has good support, and paste it where the outdated ca string was inside my wing's EFS.
rigasLee said:
For volte i didnt change anything from EFS.
The changes i did in EFS was to add 5G for any carrier, because my carrier was not supported, and also to take the CA string from another phone's firmware, that my carrier has good support, and paste it where the outdated ca string was inside my wing's EFS.
Click to expand...
Click to collapse
Okay thank!I've been trying to get this to work for 2 days now,and so far no go.I have even tried loading the mbn files with PDC and still no luck...
surgemanx said:
Okay thank!I've been trying to get this to work for 2 days now,and so far no go.I have even tried loading the mbn files with PDC and still no luck...
Click to expand...
Click to collapse
Try to extract and load .mbn file from T-mobile's firmware
rigasLee said:
Try to extract and load .mbn file from T-mobile's firmware
Click to expand...
Click to collapse
I'm on T-Mobile firmware,and I have tried and no go.If you extract modem_a or modem_b from the firmware it has all the carriers listed.
Hi. I have LG wing unlocked dual sim. But not getting volte. Tried the hidden menu option. It is showing in settings but looks ims not registered. Can you tell if you were able to get Volte on LG Wing without mbn loading. Also if mbn loading is needed, what is the process and where do you find the files for LG wing Malaysia carriers that I can use. I have another Samsung phone and that is fully volte supported. Can I copy something from it?
fuadhdmini said:
Hi,
Other phone models can use EFS Tool, QPST tool to do all the mentioned tasks.
And some phones to do that requires rooting phone since they dont have Engineering mode, and some with Engineering mode support doesnt need rooting to use the mentioned tools for example OnePlus phone.
So my question, does LG phone also has this thing called Engineering mode? since LG wing is not supported for bootloader unlocking by LG yet.
Anyone has more experience with LG phone and perhaps the mentioned tool can shed some lights on the concern? Thanks.
Click to expand...
Click to collapse
Were you able to get volte enabled on lg wing? I use this set in Malaysia.
rigasLee said:
for VOLTE first try to
1) make a new file or folder with name "enable_ue" (without quotes) on your phone's internal storage.
2) use dialer code #*462633*#100#
3) go to Field Test> Universal Enabler > Create New Config , enable VoLTE and confirm.
to add VOLTE indicator next to battery and signal strength on notification bar
1) use dialer code #*462633*#100#
2) go to Field Test > GPRI VoLTE/VoWiFi > IMS> select Sim Slot > Registration > VoLTE > and enable VoLTE Indication.
after all these
1) use dialer code #*462633*#100#
2) go to Field Test> IMS Settings> select Sim Slot > Test > Restart IMS process > select Yes
now you should have VoLTE enabled with notification bar indication
Click to expand...
Click to collapse
When i go to field test and click on ims settings it is showing not supported. I formated my phone and it became like this. Before formatting it used to work and I could see ims settings. My phone I bought from a shop and the shop keeper sent it rooted. Thatd when IMS settings were working..but after I did a reset saying not supported. How to bring it back?
surgemanx said:
This is a good write up!Thanks for this!But,what modifications are you making in EFS Explorer to fix CA-combos and the carrier policies?I have a T-Mobile branded Wing,and I'm trying to enable VoLTE AND VoWifi for AT&T since this 3g shutdown went in effect?Mostly conerned with the VoLTE part because I can't make voice calls without it.Thanks for your help.
Click to expand...
Click to collapse
Where are you located and what condition is your phone in? I've got an AT&T branded phone but I'm on TMO...maybe we can switch!
When I go to field menu in my Lg Wing, I go to IMS settings, it is completely blank. Someone please help me in registering the Volte in my Lg Wing. I am already rooted by able to patch the stock boot.img using magisk. My phone came with an unlocked bootloader and its the European firmware. I am trying to use this phone in Asia (Malaysia). Surprisingly, when I got the phone from the seller, it was not enabled volte but IMS settings in field menu would also show up (unlike now when I go there and it is blank), and also surprisingly, my volte worked also but by mistake I formatted my phone and after that it never worked. I then tried to flash the stock firmware and did root, installed voenabler but nothing seems to be helping.
I even tried loading mbn files of different carriers via PDC but no help. IMS settings always stay blank and volte doesn't get activated. Such a good phone but not able to work because my carrier here only supports volte.
If someone has an interest in helping, will be great.
How to edit CA String.
jazbaesu said:
When I go to field menu in my Lg Wing, I go to IMS settings, it is completely blank. Someone please help me in registering the Volte in my Lg Wing. I am already rooted by able to patch the stock boot.img using magisk. My phone came with an unlocked bootloader and its the European firmware. I am trying to use this phone in Asia (Malaysia). Surprisingly, when I got the phone from the seller, it was not enabled volte but IMS settings in field menu would also show up (unlike now when I go there and it is blank), and also surprisingly, my volte worked also but by mistake I formatted my phone and after that it never worked. I then tried to flash the stock firmware and did root, installed voenabler but nothing seems to be helping.
I even tried loading mbn files of different carriers via PDC but no help. IMS settings always stay blank and volte doesn't get activated. Such a good phone but not able to work because my carrier here only supports volte.
If someone has an interest in helping, will be great.
Click to expand...
Click to collapse
Lg g8x,g8,v60 Volte enable for all carriers, unlisted countries also
I will try to keep this post as small as possible. This will enable Volte for Phone ranging from Lg g8x, g8 and V60 without root or modifying the system files. Many have posted ways to get it, Iam only trying to help out the small bits missing...
forum.xda-developers.com
so i can just change my nt code to eu open with a korean firmware and volte and 5g starts working?
Related
I've spent 3 days trying to enable GSM and LTE bands in my Swift following this guide from here. But when I try to use the QPST, the software does not recognize my device.
Does anyone knows the secret code to enter in the USB Settings? I've tried a lot of them but without success.
My steps were:
Unlock the OEM - check
Install CyanogemMOD 13 (6.0.1. Marshmallow) - check
Enable Developer Options and enable debugging and Root Access (I couldnt install SuperSU coz I got bootloop twice) - check
Access to USB Settings to change from AP to CP - uncheck
Does anybody knows how to proceed?
I'm from Brazil and I really need to add new bands to get a better signal reception for GSM and the right band for LTE (700Mhz).
Anyone?
I just need the secret code to enable the usb settings.
The problem was my carrier and not the phone.
I've changed the carrier and boom... 4G working nicely.
I have found a bunch of codes as seen on the screenshots below. These are from the h932 but might work on other variants.
*#*#52325929766#*#* - LCD test(weird we have a oled)
*#*#54635564#*#* - Modem Protocol
*#*#00*4#*#* - IPV4
*#*#00*46#*#* -IPV4V6
*#*#00*6#*#* - IPV6
*#*#00*77710#*#*
*#*#00*77720#*#* these five are sim toggles that aren't
*#*#00*77730#*#* supported by my phone
*#*#00*77740#*#*
*#*#00*77790#*#*
*#*#1472365#*#* - United Protocol Debug tool( this has a bunch of options like a on device adb shell but its very limited)
*#*#244773825625#*#* - Version Info
*#*#366243#*#* - EMMC ID
*#*#762646427225#*#* - Fake Roaming settings
*#*#5773282#*#* - LPP Data Viewer[this has alot of interesting toggles]
*#*#32823787#*#* - Data Sanity Test Suite
*#546368#*XXX# - Replace the XXX with model number like 998/930/932. This is the hidden menu.
I can confirm this also works on the v20.
R800x_user said:
I have found a bunch of codes as seen on the screenshots below. These are from the h932 but might work on other variants.
Click to expand...
Click to collapse
Very interesting, but i have no idea what they are for.
zrzhu said:
Very interesting, but i have no idea what they are for.
Click to expand...
Click to collapse
I'll be editing in a while for what code does what, But I think the most important one should be the united protocol debug tool.
R800x_user said:
I'll be editing in a while for what code does what, But I think the most important one should be the united protocol debug tool.
Click to expand...
Click to collapse
I saw your PM about this, but not sure what they will do. After messing up one V30 US998 with hidden menu LTE bands, I'm a little leery.
Still don't know if that one is messed up or not. I switched to V30+, bought my wife a different V30, and that other one (my original with static LTE band issue) which I factory reset is my backup.
I can try these in hidden menus on that one.
Sent from my official carrier unlocked LG V30+ US998
ChazzMatt said:
I saw your PM about this, but not sure what they will do. After messing up one V30 US998 with hidden menu LTE bands, I'm a little leery.
Still don't know if that one is messed up or not. I switched to V30+, bought my wife a different V30, and that other one (my original with static LTE band issue) which I factory reset is my backup.
I can try these in hidden menus on that one.
Click to expand...
Click to collapse
I can relate i had a similar incident but a hard reset fixed my issue. Ive updated the op.
Lg v30+ LS998U
R800x_user said:
I have found a bunch of codes as seen on the screenshots below. These are from the h932 but might work on other variants.
*#*#52325929766#*#* - LCD test(weird we have a oled)
*#*#54635564#*#* - Modem Protocol
*#*#00*4#*#* - IPV4
*#*#00*46#*#* -IPV4V6
*#*#00*6#*#* - IPV6
*#*#00*77710#*#*
*#*#00*77720#*#* these five are sim toggles that aren't
*#*#00*77730#*#* supported by my phone
*#*#00*77740#*#*
*#*#00*77790#*#*
*#*#1472365#*#* - United Protocol Debug tool( this has a bunch of options like a on device adb shell but its very limited)
*#*#244773825625#*#* - Version Info
*#*#366243#*#* - EMMC ID
*#*#762646427225#*#* - Fake Roaming settings
*#*#5773282#*#* - LPP Data Viewer[this has alot of interesting toggles]
*#*#32823787#*#* - Data Sanity Test Suite
*#546368#*XXX# - Replace the XXX with model number like 998/930/932. This is the hidden menu.
I can confirm this also works on the v20.
Click to expand...
Click to collapse
I just tried all of these on my Ls998U and none work I have these so far for the LS998U
LG LS998U Codes
Hidden Menu: 5689#*998#
IMEI Display: *#06#
DIAG Mode: ##3424#
Data Mode: ##3282#
Net Reset(SCRTN): ##72786#
Rtn Menu : ##786#
Debug Mode: ##33284#
Error log: ##564#
De-Brand : ##27263#
zxhwk said:
I just tried all of these on my Ls998U and none work I have these so far for the LS998U
LG LS998U Codes
Hidden Menu: 5689#*998#
IMEI Display: *#06#
DIAG Mode: ##3424#
Data Mode: ##3282#
Net Reset(SCRTN): ##72786#
Rtn Menu : ##786#
Debug Mode: ##33284#
Error log: ##564#
De-Brand : ##27263#
Click to expand...
Click to collapse
Get an app called engineer mode test tool it will show you the rest of the dailer codes that are hidden
R800x_user said:
Get an app called engineer mode test tool it will show you the rest of the dailer codes that are hidden
Click to expand...
Click to collapse
It seems like they don't work with the Google phone app. That's a bummer ?
guytano86 said:
It seems like they don't work with the Google phone app. That's a bummer ?
Click to expand...
Click to collapse
Yeah they won't work on that but will work on the stock phone app.
I did try and use your suggestion and install that app but for some reason most of the codes I found for the LS998 are NOT listed in the engineering mode app and most of the ones that are listed in the app for some reason CRASH the APP and basically useless app for my Ls998 could be I have most of the stock apps blocked and disabled could be the problem this APP crashes but I am still working on a work around of unlocking the bootloader in some way there has to be a way because this is man made meaning it can be done at some time or another
zxhwk said:
I did try and use your suggestion and install that app but for some reason most of the codes I found for the LS998 are NOT listed in the engineering mode app and most of the ones that are listed in the app for some reason CRASH the APP and basically useless app for my Ls998 could be I have most of the stock apps blocked and disabled could be the problem this APP crashes but I am still working on a work around of unlocking the bootloader in some way there has to be a way because this is man made meaning it can be done at some time or another
Click to expand...
Click to collapse
Could be the issue. You wont know until you try it again but with most Packages re-enabled and see if that makes a change. If not you're out of luck
I did try it again and when I choose Engineering mode and chose Phone info it tells me this App will not work for this device and Like I said before Most if not all the codes it generates do Nothing at all that are useful .
I even tried it in several modes enable DIAG mode first and do the tests Nothing
Different Sim Cards Nothing none of the codes work on this version of the V30+ ( LS998) (Sprint)
But I am NOT giving up on this phone since I have never owned an LG phone before and this PHONE cost me Absolutely NOTHING $0 dollars so I have Nothing to loose if I brick it
( It was a free-bee from sprint because of account problems but I never activated it and never plan to unless I have full control over the Phone )
I will stick to my HTC M8 its works and looks perfectly
zxhwk said:
I did try it again and when I choose Engineering mode and chose Phone info it tells me this App will not work for this device and Like I said before Most if not all the codes it generates do Nothing at all that are useful .
I even tried it in several modes enable DIAG mode first and do the tests Nothing
Different Sim Cards Nothing none of the codes work on this version of the V30+ ( LS998) (Sprint)
But I am NOT giving up on this phone since I have never owned an LG phone before and this PHONE cost me Absolutely NOTHING $0 dollars so I have Nothing to loose if I brick it
( It was a free-bee from sprint because of account problems but I never activated it and never plan to unless I have full control over the Phone )
I will stick to my HTC M8 its works and looks perfectly
Click to expand...
Click to collapse
Sprint phones are very locked down.
I know they lock them tight but that intrigues me more to unlock it
I am sure there is a way just have to figure it out.
If I knew what Signature it was looking for during a ADB SideLoad update or recovery I may be able to use the US998 Recovery Image to force a flash and then unlock it I have all the KDZ image files from all versions except the LS998
While in Download mode hit the power key 2 times
This Menu appears but do not know what to do with it
** Select Menu**
** Select : Power Key(Long) **
** Move : Power Key(Short) **
--> MA-USB(WIFI) DL
--> POWER OFF
--> PHONE INFO
--> BACK
zxhwk said:
I just tried all of these on my Ls998U and none work I have these so far for the LS998U
LG LS998U Codes
Hidden Menu: 5689#*998#
IMEI Display: *#06#
DIAG Mode: ##3424#
Data Mode: ##3282#
Net Reset(SCRTN): ##72786#
Rtn Menu : ##786#
Debug Mode: ##33284#
Error log: ##564#
De-Brand : ##27263#
Click to expand...
Click to collapse
So does Hidden Menu: 5689#*998# actually work on your LS998U? None of them works on mine with Android 8.0 updated...
Thanks!
yes they all work at least on my sprint LS998U they do
I am going to just sell the one I have its brand new and everything original with box never been activated so its completely clear
How does ##7764726998 work? The service code is not 000000
None of these bring up the service menu so I can turn off the moisture detection.
Anyone know if any of these codes or the main hidden menu can ask for an APN update push to my US998 using Verizon SIM? Stupid carrier APN lockout since Android 8 means I can't edit the APN setting on my own, even with root. Haven't found an app on the Play store to do it or a Magisk module yet.
Check the LG v30 questions and answers forum for a thread titled "can't receive MMS pictures with third party texting with Verizon"
In the second page there is a post by RockStar2005 to a link that might possibly help you. Click on the "this webpage" link (sorry, not sure how to copy all of that over to this forum).
I took off the file required due to missing registry entrys. will repackage the files needed and upload a new version. stay tuned.
Hey guys, attached is the file required to unlock VoLTE and WiFi-Calling on the Lumia 950DS and Lumia 950 (Att) for T-Mobile. Before attempting these step, you will first unlock Mass Storage mode, using HeathCliff74's method using wpinternals here.
If you need VoLTE and WiFi calling enabled on the Lumia 950XL's take a look at nate0's work here.
Disclaimer: Do this at your own risk. I am not responsible for damage incurred to your mobile device for these modifications. If you have problems, you can always replace the modified file with the originals and then use WDRT to reflash the NVI settings.
Things to Know:
-For the DUAL SIM Models, I turned off the 2nd SIM slot from displaying in the upper left corner as I do not use it. SO DO NOT USE THIS METHOD POSTED HERE IF YOU NEED THE 2ND SIM SLOT WORKING.
-Also, another limitation right now for this method is, the 5GHz Wi-fi Calling in "WIFI ONLY" mode currently does not work, but the 2.4GHz works for now in WiFi ONLY. I am still working on this, but because of school, i haven't had much time to look into this seeing how it's my last semester. The rest of the stuff should work perfectly, Cellular Prefered, Wifi preferred, Wifi Calling OFF with IMS registration, etc...
After successfully unlocking mass storage, boot to mass storage mode and replace the following files with the ones attached in the zip file.
1. Back up the entire ADC folder in \PROGRAMS\CommonFiles
2. Back up the modemconfiguration.cab file in \PROGRAMS\CommonFiles\OEM\Public\MMO\Multivariant
After backing up the files in Steps 1 and 2:
3. Delete the ADC folder in \PROGRAMS\CommonFiles and replace it with the ADC folder from the attached zip file.
4. Copy and replace the modemconfiguration.cab file from \PROGRAMS\CommonFiles\OEM\Public\MMO\Multivariant with the modemconfiguration.cab from the zip file.
5. Copy the MO_VoWiFi_Operator_Name_15818.dll file to \Windows\System32\ folder.
6. Restart the phone out of mass storage and wait for the prompt to restart your phone for a network update.
Thanks to HeathCliff74 for his awesome work with WPInterals and nate0 for findings on the Lumia 950XL's.
Cool. I found a method that worked for this for me on the XL model here. Use what you need from that if you want to make a guide...
So both americans....
nate0 said:
Cool. I found a method that worked for this for me on the XL model here. Use what you need from that if you want to make a guide...
Click to expand...
Click to collapse
Ok, i'll take a look thanks . Quick question thought, when you successfully unlocked VoLTE, when your in a call, did you have to set the HD Voice string manually? because for some reason the HD Voice string variable doesn't show up, even with the ims registration confirmed for the voice call.
anubis23 said:
Ok, i'll take a look thanks . Quick question thought, when you successfully unlocked VoLTE, when your in a call, did you have to set the HD Voice string manually? because for some reason the HD Voice string variable doesn't show up, even with the ims registration confirmed for the voice call.
Click to expand...
Click to collapse
No. It was provisoned already I belive from the ADC files I replaced. That key is burried somewhere in one of those files.
I am curious, how stable is your WiFi calling? VoLTE works flawlessy for me, on occassion I get kicked off of ims registration before a call, but it comes back (probably signal related). But I have it enabled without Wifi calling, meaning the modem file I use does not enable wifi calling... I ask because I could not find the final entries for the nvi file to make VoLTE and WiFi calling both work reliably, at least from my perspective...
nate0 said:
No. It was provisoned already I belive from the ADC files I replaced. That key is burried somewhere in one of those files.
I am curious, how stable is your WiFi calling? VoLTE works flawlessy for me, on occassion I get kicked off of ims registration before a call, but it comes back (probably signal related). But I have it enabled without Wifi calling, meaning the modem file I use does not enable wifi calling... I ask because I could not find the final entries for the nvi file to make VoLTE and WiFi calling both work reliably, at least from my perspective...
Click to expand...
Click to collapse
I haven't been able to extensively test the configuration yet, but I used the mcfg_sw/hw from the Alcatel Idol 4s files to strip out its modem settings, then recreate then in the nvi format. i just finished enabling the volte now im looking into the hd voice string.
anubis23 said:
I haven't been able to extensively test the configuration yet, but I used the mcfg_sw/hw from the Alcatel Idol 4s files to strip out its modem settings, then recreate then in the nvi format. i just finished enabling the volte now im looking into the hd voice string.
Click to expand...
Click to collapse
Ah nice. I used the 640 LTE tmobile nvi files....Yours might be better off since it is built more for W10M...Gonna keep an eye on this thread. Let me know if you need anything.
I have an Idol 4S if you need help. I really wish the 810 would work
Any update? Steps taken? Its great you got it working, but post the deets man!
Sorry about the wait. I uploaded the work that has been done so far. Haven't been able to continue with unlocking the 5ghz in WiFi Only mode because of school schedule so I posted what I have for now. Have fun .
Hi
Talon Pro said:
I have an Idol 4S if you need help. I really wish the 810 would work
Click to expand...
Click to collapse
I have a Lumia 810 but unfortunately, i kind of took it apart for a reason unknown, it was a wonderful phone. It shouldn't be too hard to get WiFi Calling and VoLTE working on it if wpinternals works on it.
anubis23 said:
I have a Lumia 810 but unfortunately, i kind of took it apart for a reason unknown, it was a wonderful phone. It shouldn't be too hard to get WiFi Calling and VoLTE working on it if wpinternals works on it.
Click to expand...
Click to collapse
Problem is, it doesnt do LTE, it has hardly any bands and none that are actually 4G Also, ive never been able to unlock it because i cant find the emergency files (i think its those), but havent tried with the 2.4 version yet.
Ok, so i followed your directions and after rebooting out of mass storage, i get the gears screen over and over and over. I do get the MS start image, but then gears and rebooting again. The progress bar doesnt move on the gear screen though.
@Talon Pro
You can access the full filesystem of the 950 or 950 XL using the sftp method. I have been using that since long before we had mass storage publicly available and it works well. Use swish sftp which integrates in windows explorer and directions from this guide here
In a nut shell:
Gain access to the file systems using Interop Tools app.
- In Interop Tools go the SSH--Account Manager and add an account. The account user name should be System.
- Tap the account System so it is highlighted and then tap templates to use.
- Tap enable full file system access with sftp. Then go to the template options and hit the authentication drop down setting it to password.
- Add the password (4 digit pin of your choice).
- Once your phone is on wifi, add an SFTP Connection under Swish. Set the user to system. Set the path to /c/. Once added double click it, trust the key, and login with the pin you set. Explorer will open with your phones files. The guide above is a bit more detail and additional info on sftp file system access made by snickler if you need.
nate0 said:
@Talon Pro
You can access the full filesystem of the 950 or 950 XL using the sftp method. I have been using that since long before we had mass storage publicly available and it works well. Use swish sftp which integrates in windows explorer and directions from this guide here
In a nut shell:
Gain access to the file systems using Interop Tools app.
- In Interop Tools go the SSH--Account Manager and add an account. The account user name should be System.
- Tap the account System so it is highlighted and then tap templates to use.
- Tap enable full file system access with sftp. Then go to the template options and hit the authentication drop down setting it to password.
- Add the password (4 digit pin of your choice).
- Once your phone is on wifi, add an SFTP Connection under Swish. Set the user to system. Set the path to /c/. Once added double click it, trust the key, and login with the pin you set. Explorer will open with your phones files. The guide above is a bit more detail and additional info on sftp file system access made by snickler if you need.
Click to expand...
Click to collapse
Accessing the files wasnt an issue, but how do i get it out of the boot loop cycle now? WPI cant see it even.
Nvm, i was able to force it into flash mode (up, down and power) and then reboot and WPI saw and grabbed it locked the boot loader and im back into windows and it wants to restart to do the install.
Talon Pro said:
Accessing the files wasnt an issue, but how do i get it out of the boot loop cycle now? WPI cant see it even.
Nvm, i was able to force it into flash mode (up, down and power) and then reboot and WPI saw and grabbed it locked the boot loader and im back into windows and it wants to restart to do the install.
Click to expand...
Click to collapse
There is always a risk to unlocking a boot loader and enabling mass storage mode for Windows phones using Heathcliff74's tools, so it is good to know at least there is alternate way to access the file system on the 950 if we have to.
Now that im back in, neither SIM works at all.
Talon Pro said:
Now that im back in, neither SIM works at all.
Click to expand...
Click to collapse
Hi there, which phone are you currently attempting this on? I remember something similar happened to me. I can try and recreate the problem later today after classes and I'll get back to you. I believe the steps included flashing the CustomerNVI file for the model via thor2 that fixed your issue. If you need your know back working asap, you can always replace the files and then restore the NVI data via thor2:
thor2 -mode uefiflash -ffufile "FFU FIle for your phone.ffu" -do_full_nvi_update -do_factory_reset -skip_flash -reboot
anubis23 said:
Hi there, which phone are you currently attempting this on? I remember something similar happened to me. I can try and recreate the problem later today after classes and I'll get back to you. I believe the steps included flashing the CustomerNVI file for the model via thor2 that fixed your issue. If you need your know back working asap, you can always replace the files and then restore the NVI data via thor2:
thor2 -mode uefiflash -ffufile "FFU FIle for your phone.ffu" -do_full_nvi_update -do_factory_reset -skip_flash -reboot
Click to expand...
Click to collapse
Um, the thread is titled 950DS lol. Its not my main phone so i can deal with waiting a bit for a fix. I just booted it back to Mass Storage so reverse it, but ill wait till you get back to me later.
Any update?
I spend days but cannot get volte provisioned on T-Mobile USA.
Things I've done so far
1. Volte Carrier check id already off via *#*#86583#*#*
2. Have temp root access but unable keep edited build.prop, reboot cause a restore of original build.prop, reference link here
3. Try QPST method from this thread and many similar ones, but PDC cannot recognize our phone even QPST see it fine and connected on a com port. Have to use su command "setprop sys.usb.config diag,adb " to make the connection.
Everyone have any ideas?
Your provider may need to enable it from their end as well.
At least that's what mine had to do before I could get VoLTE working.
IkkeZelf1000 said:
Your provider may need to enable it from their end as well.
At least that's what mine had to do before I could get VoLTE working.
Click to expand...
Click to collapse
That's not an option, T-Mobile and all US carriers will not do that, tried already.
It worked for my Familys Phone A2 Lite with Android 9 (don't trust Android 10 update many reports of bugs)
with *#*#86583#*#* then you see HD Symbol in right corner. Your Provider must support VoLTE also some Providers in my Country they only enabled it for certain mobile plan.
Enabling settings
Dial *#546368#*500# Then go to SVC Menu -> LDB -> Enable Usb Debugging
Under SVC Menu -> Port Check Test -> Port Check Test Enabled
Go to Settings -> System -> Developer Options -> Enable OEM Unlock and Usb Debugging
Replacing Carrier Policy to enable 5G
Make sure that LG Mobile Drivers And QPST are installed
Connect your phone to a computer
Once it's connected go to Settings -> Network & Internet -> Tethering -> Enable USB Tethering
Open QPST Configuration
Go to Ports and click Add new port
Then select the LGE Mobile USB Serial Port and Click ok
Then Click Start Clients then EFS Explorer
then select the SM8150 and click ok and wait till it loads
once loaded go to policyman folder
select all the contents then right click then Copy Data File To PC
select a folder you want to save from (This would make a backup) then click ok
then select all the contents then right click and delete
when all the contents are deleted right click Copy Data File from PC
Click Browse and choose the carrier_policy.xml that you've download it and click ok
once it's done close the QPST and disconnect the phone
Reboot the phone
*#*#4636#*#* > Phone Info > Set prefered network type > NR/LTE/TDSCDMA/CDMA/EvDo/GSM/WCDMA
Enjoy until reboot!
After any reboot repeat *#*#4636#*#* > Phone Info > Set prefered network type > NR/LTE/TDSCDMA/CDMA/EvDo/GSM/WCDMA
P.S. I not flashed any modem files from korean (v500n) after crossflash
Tested on Lebara/Vodafone UK (N78 band)
USB connection must be file transfer mode, not charging mode
I am facing 5G issue v500N. Can you tell were you able to achieve call over 5g or even VOLTE or VOWIFI by this method. I want to give a try to this.
hassanulhaq said:
I am facing 5G issue v500N. Can you tell were you able to achieve call over 5g or even VOLTE or VOWIFI by this method. I want to give a try to this.
Click to expand...
Click to collapse
I tried this method 5G is working but volte didn't worked.