Hi! I use a Huawei P9 smartphone, Chinese version EVA-AL10. Recently acquired a Huawei watch (US version). The android wear app from Huawei app store only recognises the watch for pairing initially, but disconnects immediately thereafter with a message saying...Please use an official wear in china device! Android wear app from Google play store doesn't recognize watch at all....Will a firmware change be required on my phone? Or is it possible to change the firmware on the watch to a Chinese one.
sudhirkumar001 said:
Hi! I use a Huawei P9 smartphone, Chinese version EVA-AL10. Recently acquired a Huawei watch (US version). The android wear app from Huawei app store only recognises the watch for pairing initially, but disconnects immediately thereafter with a message saying...Please use an official wear in china device! Android wear app from Google play store doesn't recognize watch at all....Will a firmware change be required on my phone? Or is it possible to change the firmware on the watch to a Chinese one.
Click to expand...
Click to collapse
Did you see this? It might or might not help you. Maybe do the opposite?
http://forum.xda-developers.com/huawei-watch/general/tutorial-complete-guide-how-to-flash-t3307137
Thanks, I realised that it's the china specific firmware on my phone that's crippling the connectivity. If anyone can suggest a different firmware (International ROM)for my phone, I would be grateful. This phone HUAWEI P9 (EVA-AL10) is sold in Europe and USA, so I am sure there must be other compatible firmware
sudhirkumar001 said:
Thanks, I realised that it's the china specific firmware on my phone that's crippling the connectivity. If anyone can suggest a different firmware (International ROM)for my phone, I would be grateful. This phone HUAWEI P9 (EVA-AL10) is sold in Europe and USA, so I am sure there must be other compatible firmware
Click to expand...
Click to collapse
Hi, check info over in your phone's forum here http://forum.xda-developers.com/p9
Looks like a lot of rom, etc development...
Thanks...I am a newbie at this...need more help...anyone e with the same phone who has overcome this problem?
I would also suggest try getting hiapp.apk which is huawei china app store. There you can get china wear app version for your phone.
Maybe chineese wear app will not restrict connection to the watch
Sent from my HUAWEI CRR-L09 using Tapatalk
No, even that doesn't work...Android wear app from hiapp says ...use Android wear in china device
My problem was solved by resetting my phone to factory settings and after downloading playstore app through Hiapp, I deleted nearly every Huawei app, including hiapp and did not log in to Huawei id:good:
Hi,
If you have a Galaxy Watch without Samsung Pay enabled, is it enough to change the CSC with SDB (in my case to Australia) to enable it, or do you need to flash an Australian firmware as well?
Also, can you manage Samsung Pay on the watch with a non-Samsung android phone, like Huawei P20 (e.g configure payment cards)?
Thanks
Biermann said:
Hi,
If you have a Galaxy Watch without Samsung Pay enabled, is it enough to change the CSC with SDB (in my case to Australia) to enable it, or do you need to flash an Australian firmware as well?
Also, can you manage Samsung Pay on the watch with a non-Samsung android phone, like Huawei P20 (e.g configure payment cards)?
Thanks
Click to expand...
Click to collapse
I don't know the answer to the first question but I'm using SPay in the S3F and OnePlus 6T with out any issue. It's the only way to get MST payment without buying a SS phone.
Sent from my ONEPLUS A6013 using Tapatalk
Biermann said:
Hi,
If you have a Galaxy Watch without Samsung Pay enabled, is it enough to change the CSC with SDB (in my case to Australia) to enable it, or do you need to flash an Australian firmware as well?
Also, can you manage Samsung Pay on the watch with a non-Samsung android phone, like Huawei P20 (e.g configure payment cards)?
Thanks
Click to expand...
Click to collapse
I have a Samsung galaxy watch 42mm and Nokia 7 Plus, i live in India, since i got the watch there is no option of Samsung pay in Galaxy wear app. I manually installed latest Samsung pay plugin ( https://www.apkmirror.com/apk/samsu...n/samsung-pay-watch-plug-in-1-7-5906-release/ ) , and changed the region to Australia and after that when i paired the watch again with galaxy wear app Samsung pay is showing in it, and i then followed the instructions in the app to set it up.
I followed the below instructions samsung pay works on my nokia 7 plus.
You do NOT need root.
But this is how you do it.
1. So first, download SDBstarterKidv1 from the following link please:
https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
WARNING: This will reset your watch, so make sure you back it up so you can restore it later.
2. Next make sure your watch is set up as follows:
- Debugging Mode turned ON
- Connect watch to WiFi and get its IP address (To find the IP address on Galaxy Watch: Settings > Connections > Wifi > Wifi Networks > [your network] > Scroll down to IP address)
3. Next, from SDBstarterKidv1 double click on 'install.bat' (it will not install, it just flashes a window, but this step is required)
4. From the subfolder data\tools double click on 'sdb.exe' (it will not install, it just flashes a window, but this step is required too)
After noting IP address of the Galaxy Watch, Launch ‘Ansicon.exe’ from sdb_2.2.60_windows-64\data\tools (this thing will open a command prompt window, and all the action is done here)
5. Type: sdb connect [IP of Galaxy Watch]
6. Look at Galaxy Watch, it will prompt you to accept a message
7. If you try the sdb connect [IP address] again, it will say "already connected". This means we are connected and good to continue.
8. Type: sdb shell and Enter
9. Copy Paste: launch_app csc-manager.csc-pre-configuration and Enter
So this lets you change the region of the watch. Now for me I changed mine to Austrailia. The code for Austrailia is XSA
Once the watch is reset, pair it back up with your phone.
10. Once pared with your phone you will need to:
- Turn on developer mode again
- Turn on debugging mode
- Turn off the watch and turn it back on again.
- You may need to wait a few minutes.
11. Once you have done this, you can open the Samsung Galaxy Wearable app and go to settings. When you scroll down you should see samsung pay.
If you dont see pay, hold down the back button (Top right button) on the watch till samsung pay opens up and follow the instuctions to set it up. But initially the Samsung pay app is not recognising my compatible Indian Debit and Credit card and not allowing me to add, i thought this might be that i had changed the region to Australia, but i tried again after an hour and then to my surprise i am able to add all my 4 cards to Samsung pay app , and it is working also, i tried a payment at NFC enabled terminal and payment works flawlessly
Enjoy your new watch with Samsung Pay enabled.
I tried to follow your procedure but I`m getting always a "failed to connect" message between PC and watch
peter7 said:
I tried to follow your procedure but I`m getting always a "failed to connect" message between PC and watch
Click to expand...
Click to collapse
The fix is to go into C:\Users\{USER}\.tizen and ether delete that folder or delete the items in it. This changes your key to a new one which make the watch prompt you to accept the new key.
Make sure hidden files are shown in windows Explorer, if this thing doesn't work, then instal the tizen studio, and that will bring the .tizen folder in tha above-mentioned location, and then you can delete that folder
Sent from my Nokia 7 plus using XDA-Developers Legacy app
Hi thanks - on my PC is no tizen folder ?
Tizen studio ? I uderstand I have to install it on my PC ? Which version - any link?
Ok - now I`m a step further...I`m connected
launch_app csc-manager.csc-pre-configuration - when I say enter I will get "either wrong written or could not befound"
How can I know which region my watch is set on? I'm from Mexico and I can not use samsung pay, the model of my watch is SM-R800. Regards
ca_guri01 said:
I have a Samsung galaxy watch 42mm and Nokia 7 Plus, i live in India, since i got the watch there is no option of Samsung pay in Galaxy wear app. I manually installed latest Samsung pay plugin ( https://www.apkmirror.com/apk/samsu...n/samsung-pay-watch-plug-in-1-7-5906-release/ ) , and changed the region to Australia and after that when i paired the watch again with galaxy wear app Samsung pay is showing in it, and i then followed the instructions in the app to set it up.
I followed the below instructions samsung pay works on my nokia 7 plus.
You do NOT need root.
But this is how you do it.
1. So first, download SDBstarterKidv1 from the following link please:
https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
WARNING: This will reset your watch, so make sure you back it up so you can restore it later.
2. Next make sure your watch is set up as follows:
- Debugging Mode turned ON
- Connect watch to WiFi and get its IP address (To find the IP address on Galaxy Watch: Settings > Connections > Wifi > Wifi Networks > [your network] > Scroll down to IP address)
3. Next, from SDBstarterKidv1 double click on 'install.bat' (it will not install, it just flashes a window, but this step is required)
4. From the subfolder data\tools double click on 'sdb.exe' (it will not install, it just flashes a window, but this step is required too)
After noting IP address of the Galaxy Watch, Launch ‘Ansicon.exe’ from sdb_2.2.60_windows-64\data\tools (this thing will open a command prompt window, and all the action is done here)
5. Type: sdb connect [IP of Galaxy Watch]
6. Look at Galaxy Watch, it will prompt you to accept a message
7. If you try the sdb connect [IP address] again, it will say "already connected". This means we are connected and good to continue.
8. Type: sdb shell and Enter
9. Copy Paste: launch_app csc-manager.csc-pre-configuration and Enter
So this lets you change the region of the watch. Now for me I changed mine to Austrailia. The code for Austrailia is XSA
Once the watch is reset, pair it back up with your phone.
10. Once pared with your phone you will need to:
- Turn on developer mode again
- Turn on debugging mode
- Turn off the watch and turn it back on again.
- You may need to wait a few minutes.
11. Once you have done this, you can open the Samsung Galaxy Wearable app and go to settings. When you scroll down you should see samsung pay.
If you dont see pay, hold down the back button (Top right button) on the watch till samsung pay opens up and follow the instuctions to set it up. But initially the Samsung pay app is not recognising my compatible Indian Debit and Credit card and not allowing me to add, i thought this might be that i had changed the region to Australia, but i tried again after an hour and then to my surprise i am able to add all my 4 cards to Samsung pay app , and it is working also, i tried a payment at NFC enabled terminal and payment works flawlessly
Enjoy your new watch with Samsung Pay enabled.
Click to expand...
Click to collapse
BUT how about my carrier T Mobile ...will he still work ...because now my phone is saying we are no longer in Germany no now we are in for example Switzerland
AIKON1989 said:
How can I know which region my watch is set on? I'm from Mexico and I can not use samsung pay, the model of my watch is SM-R800. Regards
Click to expand...
Click to collapse
When you do the step 9, it will show the installed csc on your watch, and then you can scroll up or down and select your desired region csc
Sent from my [device_name] using XDA-Developers Legacy app
Great now I switched from Germany to Swiss BUT they do not accept german cards .....................
Any other country which will accept german cards ????
Thanks for your help i am almost Finished but I'm getting the answer despite my card is confirmed by the bank from Samsung pay App confirm your card
Hello . Curve cards now support Samsung pay. Do you think that is a way to get working Samsung pay in not supported country? On galaxy watch LTE?
tomaspavelka18 said:
Hello . Curve cards now support Samsung pay. Do you think that is a way to get working Samsung pay in not supported country? On galaxy watch LTE?
Click to expand...
Click to collapse
Mine is also LTE and it seems we are out of luck. I use Samsung Pay on my phone but it seems I will not be able to change the CSC region cause it is a US LTE model.
If any wiz here know a way, let us know!
So curve will not work?
---------- Post added at 08:35 AM ---------- Previous post was at 08:22 AM ----------
You can definitely change the region on your watch but if the watch will accept curve ?
I think that Curve is win for people which there bank doesn't not support Samsung pay. So they get curve card (where they add there cards) and curve card add to Samsung pay.
Another case is that someone is in country what does not support Samsung pay. So there is a way that you change the CSC region and add curve card. That should work also.
Worst case is if you have LTE model of your watch, there is ( I think) no way to change CSC region and work with cellular data normally.
I hope that I am wrong about the last one and someone correct me and show me way how to get SP working in not supported country and still use my tariff from local operator.
I'm in Germany and changed via csc the region of my watch. My phone Tarif is German. I think you are right.
I tried to combine several cards with sp but without success. So I assume that curve will work either.
Well today I was curious and I change csc on my galaxy watch LTE with working esim (tmobile). From TZM (Czech tmobile) to AUT( Switzerland)
Before I did backup of watch. After change of CSC -> Samsung Pay shows up. I expected that. What I did not expect was that after restoring my backup the esim setup will work like before and it is.
I tried add some cards to Samsung pay but no succes. My bank doesn't support that.
Now I'm waiting for my curve card. It should work with SP.
tomaspavelka18 said:
Well today I was curious and I change csc on my galaxy watch LTE with working esim (tmobile). From TZM (Czech tmobile) to AUT( Switzerland)
Before I did backup of watch. After change of CSC -> Samsung Pay shows up. I expected that. What I did not expect was that after restoring my backup the esim setup will work like before and it is.
I tried add some cards to Samsung pay but no succes. My bank doesn't support that.
Now I'm waiting for my curve card. It should work with SP.
Click to expand...
Click to collapse
I have an LTE version from US but the ZTO code fro Brazil does not show. Was that a similar case as yours? If so, how was the process? I know my bank accept Samsung Pay here, since I use it on my phone already.Let me know.
Cheers,
After step 9 watch showed me lots of CSC, AUT included. I followed instructions from page 1.
Recent purchased a samsung active which dosent have samsung pay installed. Looking into it, the watch should have Samsung Pay pre-installed. I have made sure that the watch is fully up-to-date (Tizen Version 4.0.0.3, Software Version R500XXu1BSD3). When I recived the watched I also noticed that the language was not enlgish (also not sure what it was).
Does anyone know how to solve this issue? The model of the watch is SM-R500 and the phone I have linked is a Samsung S10+
Is there a way to flash a diffrent software onto the active to get samsung pay working?
I had the same issue. You have to sdb command your watch from a computer while on the same wifi. You will be able to change the watches region (I changed to USA). Pay will then be preloaded on your watch. This resets the watch
This works with GWA too:
https://www.google.com/amp/s/forum....-how-to-change-gear-s3-r760-csc-t3784226/amp/
And if you already have sdb installed (for example with GalaxyWatchDesigner) you can skip to point 5
I have a Galaxy Watch SM-R800 and the Galaxy Wearables app installed on my S10+ but couldn't pair my watch with my phone. Both my phone and watch were bought in India, but I use them here in Italy cause I live here.
I used this watch for many days with no problem at all and then one day I upgraded my phone to One UI 2 (beta) and I encountered this bug with security module, which locked me out from entering the phone even though I was entering the correct Pin or passcode.
After that I rolled back my phone to Android 9 (stable) version.
So my assumption is that the procedure that I followed to upgrade my phone to One UI 2 might have caused this issue with my watch.
Firstly I created a Samsung account with my email which by default is Italian cause of location, but I had to sign up for the beta program using an India account. No beta testing in Italy.
As suggested on XDA forums by someone I had to delete my Italian Samsung account and create Indian account with same email if I want to enroll for the beta program, which I did.
So I didn't use the watch for few days and later when I tried to pair it with my phone it says, "Couldn't Pair your watch" (Try Again/ Cancel)
I'm using the same email Id for Signing In to finish the setup of pairing with which I initially setup both the Phone and watch. It sometimes says I am using a different account from the one I used earlier to setup. I'm definitely sure that I never used any other account of mine or a friend. (No others)
I need your help if someone has a solution for this situation.
Thanks,
Akhil Bellam.
akhilbellam said:
I have a Galaxy Watch SM-R800 and the Galaxy Wearables app installed on my S10+ but couldn't pair my watch with my phone. Both my phone and watch were bought in India, but I use them here in Italy cause I live here.
I used this watch for many days with no problem at all and then one day I upgraded my phone to One UI 2 (beta) and I encountered this bug with security module, which locked me out from entering the phone even though I was entering the correct Pin or passcode.
After that I rolled back my phone to Android 9 (stable) version.
So my assumption is that the procedure that I followed to upgrade my phone to One UI 2 might have caused this issue with my watch.
Firstly I created a Samsung account with my email which by default is Italian cause of location, but I had to sign up for the beta program using an India account. No beta testing in Italy.
As suggested on XDA forums by someone I had to delete my Italian Samsung account and create Indian account with same email if I want to enroll for the beta program, which I did.
So I didn't use the watch for few days and later when I tried to pair it with my phone it says, "Couldn't Pair your watch" (Try Again/ Cancel)
I'm using the same email Id for Signing In to finish the setup of pairing with which I initially setup both the Phone and watch. It sometimes says I am using a different account from the one I used earlier to setup. I'm definitely sure that I never used any other account of mine or a friend. (No others)
I need your help if someone has a solution for this situation.
Thanks,
Akhil Bellam.
Click to expand...
Click to collapse
Hello. did you tried to reinitialise the watch?
The watch is locked (reactivation lock (not other security lock)) by original samsung account used when it was locked. You MUST NOT DELETE this account UNTIL the watch was UNLOCKED. If you delete the original account you will (never) not able to unlock the watch. (or use hack (paid) method))
I can help u have to use netodin and install combination file and then u have to remove reactivation lock and then install official firmware. Indeed a long and complicated process. Msg me on whatsapp 923107671256
Iron_UV said:
Hello. did you tried to reinitialise the watch?
Click to expand...
Click to collapse
It doesn't work if you try anything else other than flashing it.
By the way I fixed my watch finally.
I had to use the firmware and other combination files, but I couldn't find them anywhere on the web.
And then finally I found this video on Youtube showing how to remove that re-activation lock on Gear S3. youtube . com/watch?v=Afx3RWWFSfg&t=1s
and I contacted the guy on Facebook.
He redirected me to his website, where I paid him a little money $15 and he provided me with the necessary files to do the task.
https: // electrovo.com/
akhilbellam said:
It doesn't work if you try anything else other than flashing it.
By the way I fixed my watch finally.
I had to use the firmware and other combination files, but I couldn't find them anywhere on the web.
And then finally I found this video on Youtube showing how to remove that re-activation lock on Gear S3. youtube . com/watch?v=Afx3RWWFSfg&t=1s
and I contacted the guy on Facebook.
He redirected me to his website, where I paid him a little money $15 and he provided me with the necessary files to do the task.
https: // electrovo.com/
Click to expand...
Click to collapse
hi bro i have same watch R800 wich is samsung account lock. can you plz share your file with me ?
For Those who are facing problem on the galaxy watch SM-R800 i finally found the solution to by pass the Samsung Account it's a little long method but working fine