Related
Hello community, I hope you are fine.
I bought recently a Galaxy Watch and I noticed that Samsung Pay was not on it, at least it's not being displayed, I synchronize it with my Note 8 and still nothing.
This watch has been made in Samsung Vietnam and the model of course is the SM-R800:
Tizen 4.0.0.1
Software R800XXU1BRK3
Know version 2.3.0
From my Galaxy Note 8 I am using without any issues Samsung Pay, but I can't make it appears into my watch.
I live in France which is totally available Samsung Pay.
Any suggestions? Looking in Internet I could see that people are having the same issue and it's fixed with a new Rom from other country different than the one I have but I can't find any source and neither how to do it.
CSC issue?
Please help!!
Thanks in advance :good:
Hey, I have exactly the same problem. Everything is working on my phone, but because my galaxy watch is an international one I don't have Samsung Pay.
I'll be really happy if someone has a solution .
Thanks !
Benjamin40 said:
Hey, I have exactly the same problem. Everything is working on my phone, but because my galaxy watch is an international one I don't have Samsung Pay.
I'll be really happy if someone has a solution .
Thanks !
Click to expand...
Click to collapse
My phone (Note 8) and watch (46mm LTE version) are both Verizon OEM, neither rooted. Phone has Samsung Pay which works well. I had to install Samsung Pay on the watch, and the credit cards did NOT sync automatically. When you add credit cards to the watch it gives you the option to enter a new one from scratch or "Import" card/s from your phone. I selected import and you have to do one card at a time. Also about a third of the time, the import does not take and you have to re-do it. Also you still need the physical cards with you because for each import you need to re-verify the CCD. Lastly, I noticed when doing one of the imports, for one of the cards it thought that card was already on two other instances of Samsung Pay (my old Note 5, and my Note 8 presumably). I do not see any issue with having to do it this way - they try to be extremely careful with this credit card information and it's better to be safe than sorry!
- R. Kruse Ludington
Galaxy Note 8<-5<-3<-S3<-Nexus; Droid X; HTC HD2<-Touch Pro 2<-Tilt<-8525; O2 XDA II<-XDA; Motorola StarTac
ronaldcuadra said:
From my Galaxy Note 8 I am using without any issues Samsung Pay, but I can't make it appears into my watch.
I live in France which is totally available Samsung Pay.
Any suggestions? Looking in Internet I could see that people are having the same issue and it's fixed with a new Rom from other country different than the one I have but I can't find any source and neither how to do it.
CSC issue?
Please help!!
Thanks in advance :good:
Click to expand...
Click to collapse
I had the same issue where Samsung Pay did not appear on my watch. I reset the watch and reconnected it with my phone. After the reconnection setup has finished, few minutes later Samsung Pay appeared on the watch.
Hello everyone.
I have a Galaxy Watch 46mm bought in France (serial number: R5AKA0GCX9T). Samsung Pay not yet available on the watch in France.
I also have a MAX pay card and a Xiaomi Pocophone phone with Android 9.
Before making the CSC switch, I would like to know if it is imperative to have a Samsung brand phone for it to work?
I ask the question if someone was successful with a non-Samsung phone, knowing that Samsung Pay is available only on the phones of the brand.
So basically it is imperative to have Samsung Pay installed on the phone so that it works?
Thanks for your help
BCN06 said:
Hello everyone.
I have a Galaxy Watch 46mm bought in France (serial number: R5AKA0GCX9T). Samsung Pay not yet available on the watch in France.
I also have a MAX pay card and a Xiaomi Pocophone phone with Android 9.
Before making the CSC switch, I would like to know if it is imperative to have a Samsung brand phone for it to work?
I ask the question if someone was successful with a non-Samsung phone, knowing that Samsung Pay is available only on the phones of the brand.
So basically it is imperative to have Samsung Pay installed on the phone so that it works?
Thanks for your help
Click to expand...
Click to collapse
Try to not necro old posts please.
And for your question, no, it's not necessary to have samsung pay on the phone.
I have a Samsung galaxy watch 42mm and Nokia 7 Plus, i live in India, since i got the watch there is no option of Samsung pay in Galaxy wear app. I manually installed latest Samsung pay plugin ( https://www.apkmirror.com/apk/samsu...n/samsung-pay-watch-plug-in-1-7-5906-release/ ) , and changed the region to Australia and after that when i paired the watch again with galaxy wear app Samsung pay is showing in it, and i then followed the instructions in the app to set it up.
I followed the below instructions samsung pay works on my nokia 7 plus.
You do NOT need root.
But this is how you do it.
1. So first, download SDBstarterKidv1 from the following link please:
https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
WARNING: This will reset your watch, so make sure you back it up so you can restore it later.
2. Next make sure your watch is set up as follows:
- Debugging Mode turned ON
- Connect watch to WiFi and get its IP address (To find the IP address on Galaxy Watch: Settings > Connections > Wifi > Wifi Networks > [your network] > Scroll down to IP address)
3. Next, from SDBstarterKidv1 double click on 'install.bat' (it will not install, it just flashes a window, but this step is required)
4. From the subfolder data\tools double click on 'sdb.exe' (it will not install, it just flashes a window, but this step is required too)
After noting IP address of the Galaxy Watch, Launch ‘Ansicon.exe’ from sdb_2.2.60_windows-64\data\tools (this thing will open a command prompt window, and all the action is done here)
5. Type: sdb connect [IP of Galaxy Watch]
6. Look at Galaxy Watch, it will prompt you to accept a message
7. If you try the sdb connect [IP address] again, it will say "already connected". This means we are connected and good to continue.
8. Type: sdb shell and Enter
9. Copy Paste: launch_app csc-manager.csc-pre-configuration and Enter
So this lets you change the region of the watch. Now for me I changed mine to Austrailia. The code for Austrailia is XSA
Once the watch is reset, pair it back up with your phone.
10. Once pared with your phone you will need to:
- Turn on developer mode again
- Turn on debugging mode
- Turn off the watch and turn it back on again.
- You may need to wait a few minutes.
11. Once you have done this, you can open the Samsung Galaxy Wearable app and go to settings. When you scroll down you should see samsung pay.
If you dont see pay, hold down the back button (Top right button) on the watch till samsung pay opens up and follow the instuctions to set it up. But initially the Samsung pay app is not recognising my compatible Indian Debit and Credit card and not allowing me to add, i thought this might be that i had changed the region to Australia, but i tried again after an hour and then to my surprise i am able to add all my 4 cards to Samsung pay app , and it is working also, i tried a payment at NFC enabled terminal and payment works flawlessly
Enjoy your new watch with Samsung Pay enabled
ca_guri01 said:
I have a Samsung galaxy watch 42mm and Nokia 7 Plus, i live in India, since i got the watch there is no option of Samsung pay in Galaxy wear app. I manually installed latest Samsung pay plugin ( https://www.apkmirror.com/apk/samsu...n/samsung-pay-watch-plug-in-1-7-5906-release/ ) , and changed the region to Australia and after that when i paired the watch again with galaxy wear app Samsung pay is showing in it, and i then followed the instructions in the app to set it up.
I followed the below instructions samsung pay works on my nokia 7 plus.
You do NOT need root.
But this is how you do it.
1. So first, download SDBstarterKidv1 from the following link please:
https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
WARNING: This will reset your watch, so make sure you back it up so you can restore it later.
2. Next make sure your watch is set up as follows:
- Debugging Mode turned ON
- Connect watch to WiFi and get its IP address (To find the IP address on Galaxy Watch: Settings > Connections > Wifi > Wifi Networks > [your network] > Scroll down to IP address)
3. Next, from SDBstarterKidv1 double click on 'install.bat' (it will not install, it just flashes a window, but this step is required)
4. From the subfolder data\tools double click on 'sdb.exe' (it will not install, it just flashes a window, but this step is required too)
After noting IP address of the Galaxy Watch, Launch ‘Ansicon.exe’ from sdb_2.2.60_windows-64\data\tools (this thing will open a command prompt window, and all the action is done here)
5. Type: sdb connect [IP of Galaxy Watch]
6. Look at Galaxy Watch, it will prompt you to accept a message
7. If you try the sdb connect [IP address] again, it will say "already connected". This means we are connected and good to continue.
8. Type: sdb shell and Enter
9. Copy Paste: launch_app csc-manager.csc-pre-configuration and Enter
So this lets you change the region of the watch. Now for me I changed mine to Austrailia. The code for Austrailia is XSA
Once the watch is reset, pair it back up with your phone.
10. Once pared with your phone you will need to:
- Turn on developer mode again
- Turn on debugging mode
- Turn off the watch and turn it back on again.
- You may need to wait a few minutes.
11. Once you have done this, you can open the Samsung Galaxy Wearable app and go to settings. When you scroll down you should see samsung pay.
If you dont see pay, hold down the back button (Top right button) on the watch till samsung pay opens up and follow the instuctions to set it up. But initially the Samsung pay app is not recognising my compatible Indian Debit and Credit card and not allowing me to add, i thought this might be that i had changed the region to Australia, but i tried again after an hour and then to my surprise i am able to add all my 4 cards to Samsung pay app , and it is working also, i tried a payment at NFC enabled terminal and payment works flawlessly
Enjoy your new watch with Samsung Pay enabled
Click to expand...
Click to collapse
Everything works great until I have to type in the launch_app part. It tells me it launched successfully, however nothing happens and the watch does nothing.
imtheblackcrow said:
Everything works great until I have to type in the launch_app part. It tells me it launched successfully, however nothing happens and the watch does nothing.
Click to expand...
Click to collapse
R u on tizen version 4.0.0.7?
Sent from my Redmi K20 Pro using XDA Labs
Is there any way of getting Samsung pay on the latest firmware of Tizen? Didn't find anything but the above method, which doesn't work anymore. Or maybe at least a roadmap for Samsung pay rollout in other countries? Romanian user here.
Flaminel said:
Is there any way of getting Samsung pay on the latest firmware of Tizen? Didn't find anything but the above method, which doesn't work anymore. Or maybe at least a roadmap for Samsung pay rollout in other countries? Romanian user here.
Click to expand...
Click to collapse
sorry my english, i'm from brazil and i'm fluent in google translator ...
you have a friend, but this process only works with the older version, that is, you will have to downgrade. if your version is tizen 4.0.0.7 do the process below, it worked for me.
check out the links below.
rom here: https://forum.xda-developers.com/smartwatch/galaxy-watch/change-csc-downgrade-galaxy-watch-t4016185 ## https://androidfilehost.com/?fid=11410963190603915888
Odin here: https://forum.xda-developers.com/sm...re-netodin-t3895010/post78800094#post78800094
Hi,
If you have a Galaxy Watch without Samsung Pay enabled, is it enough to change the CSC with SDB (in my case to Australia) to enable it, or do you need to flash an Australian firmware as well?
Also, can you manage Samsung Pay on the watch with a non-Samsung android phone, like Huawei P20 (e.g configure payment cards)?
Thanks
Biermann said:
Hi,
If you have a Galaxy Watch without Samsung Pay enabled, is it enough to change the CSC with SDB (in my case to Australia) to enable it, or do you need to flash an Australian firmware as well?
Also, can you manage Samsung Pay on the watch with a non-Samsung android phone, like Huawei P20 (e.g configure payment cards)?
Thanks
Click to expand...
Click to collapse
I don't know the answer to the first question but I'm using SPay in the S3F and OnePlus 6T with out any issue. It's the only way to get MST payment without buying a SS phone.
Sent from my ONEPLUS A6013 using Tapatalk
Biermann said:
Hi,
If you have a Galaxy Watch without Samsung Pay enabled, is it enough to change the CSC with SDB (in my case to Australia) to enable it, or do you need to flash an Australian firmware as well?
Also, can you manage Samsung Pay on the watch with a non-Samsung android phone, like Huawei P20 (e.g configure payment cards)?
Thanks
Click to expand...
Click to collapse
I have a Samsung galaxy watch 42mm and Nokia 7 Plus, i live in India, since i got the watch there is no option of Samsung pay in Galaxy wear app. I manually installed latest Samsung pay plugin ( https://www.apkmirror.com/apk/samsu...n/samsung-pay-watch-plug-in-1-7-5906-release/ ) , and changed the region to Australia and after that when i paired the watch again with galaxy wear app Samsung pay is showing in it, and i then followed the instructions in the app to set it up.
I followed the below instructions samsung pay works on my nokia 7 plus.
You do NOT need root.
But this is how you do it.
1. So first, download SDBstarterKidv1 from the following link please:
https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
WARNING: This will reset your watch, so make sure you back it up so you can restore it later.
2. Next make sure your watch is set up as follows:
- Debugging Mode turned ON
- Connect watch to WiFi and get its IP address (To find the IP address on Galaxy Watch: Settings > Connections > Wifi > Wifi Networks > [your network] > Scroll down to IP address)
3. Next, from SDBstarterKidv1 double click on 'install.bat' (it will not install, it just flashes a window, but this step is required)
4. From the subfolder data\tools double click on 'sdb.exe' (it will not install, it just flashes a window, but this step is required too)
After noting IP address of the Galaxy Watch, Launch ‘Ansicon.exe’ from sdb_2.2.60_windows-64\data\tools (this thing will open a command prompt window, and all the action is done here)
5. Type: sdb connect [IP of Galaxy Watch]
6. Look at Galaxy Watch, it will prompt you to accept a message
7. If you try the sdb connect [IP address] again, it will say "already connected". This means we are connected and good to continue.
8. Type: sdb shell and Enter
9. Copy Paste: launch_app csc-manager.csc-pre-configuration and Enter
So this lets you change the region of the watch. Now for me I changed mine to Austrailia. The code for Austrailia is XSA
Once the watch is reset, pair it back up with your phone.
10. Once pared with your phone you will need to:
- Turn on developer mode again
- Turn on debugging mode
- Turn off the watch and turn it back on again.
- You may need to wait a few minutes.
11. Once you have done this, you can open the Samsung Galaxy Wearable app and go to settings. When you scroll down you should see samsung pay.
If you dont see pay, hold down the back button (Top right button) on the watch till samsung pay opens up and follow the instuctions to set it up. But initially the Samsung pay app is not recognising my compatible Indian Debit and Credit card and not allowing me to add, i thought this might be that i had changed the region to Australia, but i tried again after an hour and then to my surprise i am able to add all my 4 cards to Samsung pay app , and it is working also, i tried a payment at NFC enabled terminal and payment works flawlessly
Enjoy your new watch with Samsung Pay enabled.
I tried to follow your procedure but I`m getting always a "failed to connect" message between PC and watch
peter7 said:
I tried to follow your procedure but I`m getting always a "failed to connect" message between PC and watch
Click to expand...
Click to collapse
The fix is to go into C:\Users\{USER}\.tizen and ether delete that folder or delete the items in it. This changes your key to a new one which make the watch prompt you to accept the new key.
Make sure hidden files are shown in windows Explorer, if this thing doesn't work, then instal the tizen studio, and that will bring the .tizen folder in tha above-mentioned location, and then you can delete that folder
Sent from my Nokia 7 plus using XDA-Developers Legacy app
Hi thanks - on my PC is no tizen folder ?
Tizen studio ? I uderstand I have to install it on my PC ? Which version - any link?
Ok - now I`m a step further...I`m connected
launch_app csc-manager.csc-pre-configuration - when I say enter I will get "either wrong written or could not befound"
How can I know which region my watch is set on? I'm from Mexico and I can not use samsung pay, the model of my watch is SM-R800. Regards
ca_guri01 said:
I have a Samsung galaxy watch 42mm and Nokia 7 Plus, i live in India, since i got the watch there is no option of Samsung pay in Galaxy wear app. I manually installed latest Samsung pay plugin ( https://www.apkmirror.com/apk/samsu...n/samsung-pay-watch-plug-in-1-7-5906-release/ ) , and changed the region to Australia and after that when i paired the watch again with galaxy wear app Samsung pay is showing in it, and i then followed the instructions in the app to set it up.
I followed the below instructions samsung pay works on my nokia 7 plus.
You do NOT need root.
But this is how you do it.
1. So first, download SDBstarterKidv1 from the following link please:
https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
WARNING: This will reset your watch, so make sure you back it up so you can restore it later.
2. Next make sure your watch is set up as follows:
- Debugging Mode turned ON
- Connect watch to WiFi and get its IP address (To find the IP address on Galaxy Watch: Settings > Connections > Wifi > Wifi Networks > [your network] > Scroll down to IP address)
3. Next, from SDBstarterKidv1 double click on 'install.bat' (it will not install, it just flashes a window, but this step is required)
4. From the subfolder data\tools double click on 'sdb.exe' (it will not install, it just flashes a window, but this step is required too)
After noting IP address of the Galaxy Watch, Launch ‘Ansicon.exe’ from sdb_2.2.60_windows-64\data\tools (this thing will open a command prompt window, and all the action is done here)
5. Type: sdb connect [IP of Galaxy Watch]
6. Look at Galaxy Watch, it will prompt you to accept a message
7. If you try the sdb connect [IP address] again, it will say "already connected". This means we are connected and good to continue.
8. Type: sdb shell and Enter
9. Copy Paste: launch_app csc-manager.csc-pre-configuration and Enter
So this lets you change the region of the watch. Now for me I changed mine to Austrailia. The code for Austrailia is XSA
Once the watch is reset, pair it back up with your phone.
10. Once pared with your phone you will need to:
- Turn on developer mode again
- Turn on debugging mode
- Turn off the watch and turn it back on again.
- You may need to wait a few minutes.
11. Once you have done this, you can open the Samsung Galaxy Wearable app and go to settings. When you scroll down you should see samsung pay.
If you dont see pay, hold down the back button (Top right button) on the watch till samsung pay opens up and follow the instuctions to set it up. But initially the Samsung pay app is not recognising my compatible Indian Debit and Credit card and not allowing me to add, i thought this might be that i had changed the region to Australia, but i tried again after an hour and then to my surprise i am able to add all my 4 cards to Samsung pay app , and it is working also, i tried a payment at NFC enabled terminal and payment works flawlessly
Enjoy your new watch with Samsung Pay enabled.
Click to expand...
Click to collapse
BUT how about my carrier T Mobile ...will he still work ...because now my phone is saying we are no longer in Germany no now we are in for example Switzerland
AIKON1989 said:
How can I know which region my watch is set on? I'm from Mexico and I can not use samsung pay, the model of my watch is SM-R800. Regards
Click to expand...
Click to collapse
When you do the step 9, it will show the installed csc on your watch, and then you can scroll up or down and select your desired region csc
Sent from my [device_name] using XDA-Developers Legacy app
Great now I switched from Germany to Swiss BUT they do not accept german cards .....................
Any other country which will accept german cards ????
Thanks for your help i am almost Finished but I'm getting the answer despite my card is confirmed by the bank from Samsung pay App confirm your card
Hello . Curve cards now support Samsung pay. Do you think that is a way to get working Samsung pay in not supported country? On galaxy watch LTE?
tomaspavelka18 said:
Hello . Curve cards now support Samsung pay. Do you think that is a way to get working Samsung pay in not supported country? On galaxy watch LTE?
Click to expand...
Click to collapse
Mine is also LTE and it seems we are out of luck. I use Samsung Pay on my phone but it seems I will not be able to change the CSC region cause it is a US LTE model.
If any wiz here know a way, let us know!
So curve will not work?
---------- Post added at 08:35 AM ---------- Previous post was at 08:22 AM ----------
You can definitely change the region on your watch but if the watch will accept curve ?
I think that Curve is win for people which there bank doesn't not support Samsung pay. So they get curve card (where they add there cards) and curve card add to Samsung pay.
Another case is that someone is in country what does not support Samsung pay. So there is a way that you change the CSC region and add curve card. That should work also.
Worst case is if you have LTE model of your watch, there is ( I think) no way to change CSC region and work with cellular data normally.
I hope that I am wrong about the last one and someone correct me and show me way how to get SP working in not supported country and still use my tariff from local operator.
I'm in Germany and changed via csc the region of my watch. My phone Tarif is German. I think you are right.
I tried to combine several cards with sp but without success. So I assume that curve will work either.
Well today I was curious and I change csc on my galaxy watch LTE with working esim (tmobile). From TZM (Czech tmobile) to AUT( Switzerland)
Before I did backup of watch. After change of CSC -> Samsung Pay shows up. I expected that. What I did not expect was that after restoring my backup the esim setup will work like before and it is.
I tried add some cards to Samsung pay but no succes. My bank doesn't support that.
Now I'm waiting for my curve card. It should work with SP.
tomaspavelka18 said:
Well today I was curious and I change csc on my galaxy watch LTE with working esim (tmobile). From TZM (Czech tmobile) to AUT( Switzerland)
Before I did backup of watch. After change of CSC -> Samsung Pay shows up. I expected that. What I did not expect was that after restoring my backup the esim setup will work like before and it is.
I tried add some cards to Samsung pay but no succes. My bank doesn't support that.
Now I'm waiting for my curve card. It should work with SP.
Click to expand...
Click to collapse
I have an LTE version from US but the ZTO code fro Brazil does not show. Was that a similar case as yours? If so, how was the process? I know my bank accept Samsung Pay here, since I use it on my phone already.Let me know.
Cheers,
After step 9 watch showed me lots of CSC, AUT included. I followed instructions from page 1.
Hi! For earlier I apologize for my English
I have problem with samsung pay in watch.
On a galaxy watch 46" R-805F (purchased with e-Sim), bought with computeruniverse - Samsung Pay does not appear in apps in Samsung wearable in the Russian Federation (I changed the region via sdb to SER), everything in Samsung Pay works normally on the S10 + phone (the card is tied up - it works without complaints) - but on watch written not installed payment application.
Resetting the clock and reinstalling wearable. The versions are the latest. Reset did after the change of region. I also installed the plugin from the header - the application does not display in wearable/watch((
What else can you try? Are there other payment systems at worst?
Thanks for any information about my case!
I have a Galaxy Watch SM-R800 and the Galaxy Wearables app installed on my S10+ but couldn't pair my watch with my phone. Both my phone and watch were bought in India, but I use them here in Italy cause I live here.
I used this watch for many days with no problem at all and then one day I upgraded my phone to One UI 2 (beta) and I encountered this bug with security module, which locked me out from entering the phone even though I was entering the correct Pin or passcode.
After that I rolled back my phone to Android 9 (stable) version.
So my assumption is that the procedure that I followed to upgrade my phone to One UI 2 might have caused this issue with my watch.
Firstly I created a Samsung account with my email which by default is Italian cause of location, but I had to sign up for the beta program using an India account. No beta testing in Italy.
As suggested on XDA forums by someone I had to delete my Italian Samsung account and create Indian account with same email if I want to enroll for the beta program, which I did.
So I didn't use the watch for few days and later when I tried to pair it with my phone it says, "Couldn't Pair your watch" (Try Again/ Cancel)
I'm using the same email Id for Signing In to finish the setup of pairing with which I initially setup both the Phone and watch. It sometimes says I am using a different account from the one I used earlier to setup. I'm definitely sure that I never used any other account of mine or a friend. (No others)
I need your help if someone has a solution for this situation.
Thanks,
Akhil Bellam.
akhilbellam said:
I have a Galaxy Watch SM-R800 and the Galaxy Wearables app installed on my S10+ but couldn't pair my watch with my phone. Both my phone and watch were bought in India, but I use them here in Italy cause I live here.
I used this watch for many days with no problem at all and then one day I upgraded my phone to One UI 2 (beta) and I encountered this bug with security module, which locked me out from entering the phone even though I was entering the correct Pin or passcode.
After that I rolled back my phone to Android 9 (stable) version.
So my assumption is that the procedure that I followed to upgrade my phone to One UI 2 might have caused this issue with my watch.
Firstly I created a Samsung account with my email which by default is Italian cause of location, but I had to sign up for the beta program using an India account. No beta testing in Italy.
As suggested on XDA forums by someone I had to delete my Italian Samsung account and create Indian account with same email if I want to enroll for the beta program, which I did.
So I didn't use the watch for few days and later when I tried to pair it with my phone it says, "Couldn't Pair your watch" (Try Again/ Cancel)
I'm using the same email Id for Signing In to finish the setup of pairing with which I initially setup both the Phone and watch. It sometimes says I am using a different account from the one I used earlier to setup. I'm definitely sure that I never used any other account of mine or a friend. (No others)
I need your help if someone has a solution for this situation.
Thanks,
Akhil Bellam.
Click to expand...
Click to collapse
Hello. did you tried to reinitialise the watch?
The watch is locked (reactivation lock (not other security lock)) by original samsung account used when it was locked. You MUST NOT DELETE this account UNTIL the watch was UNLOCKED. If you delete the original account you will (never) not able to unlock the watch. (or use hack (paid) method))
I can help u have to use netodin and install combination file and then u have to remove reactivation lock and then install official firmware. Indeed a long and complicated process. Msg me on whatsapp 923107671256
Iron_UV said:
Hello. did you tried to reinitialise the watch?
Click to expand...
Click to collapse
It doesn't work if you try anything else other than flashing it.
By the way I fixed my watch finally.
I had to use the firmware and other combination files, but I couldn't find them anywhere on the web.
And then finally I found this video on Youtube showing how to remove that re-activation lock on Gear S3. youtube . com/watch?v=Afx3RWWFSfg&t=1s
and I contacted the guy on Facebook.
He redirected me to his website, where I paid him a little money $15 and he provided me with the necessary files to do the task.
https: // electrovo.com/
akhilbellam said:
It doesn't work if you try anything else other than flashing it.
By the way I fixed my watch finally.
I had to use the firmware and other combination files, but I couldn't find them anywhere on the web.
And then finally I found this video on Youtube showing how to remove that re-activation lock on Gear S3. youtube . com/watch?v=Afx3RWWFSfg&t=1s
and I contacted the guy on Facebook.
He redirected me to his website, where I paid him a little money $15 and he provided me with the necessary files to do the task.
https: // electrovo.com/
Click to expand...
Click to collapse
hi bro i have same watch R800 wich is samsung account lock. can you plz share your file with me ?
For Those who are facing problem on the galaxy watch SM-R800 i finally found the solution to by pass the Samsung Account it's a little long method but working fine
Hi!
I was wondering if anyone managed to setup Samsung Pay on their galaxy watch active 2 while their phone is rooted.
I can't setup SPay on my watch since it requires setting it up on my galaxy s10+ phone which is rooted.
Maybe any bypass or any other suggestion?
Thank you!
Neeham said:
Hi!
I was wondering if anyone managed to setup Samsung Pay on their galaxy watch active 2 while their phone is rooted.
I can't setup SPay on my watch since it requires setting it up on my galaxy s10+ phone which is rooted.
Maybe any bypass or any other suggestion?
Thank you!
Click to expand...
Click to collapse
Unfortunately, Knox kills the ability to setup Samsung pay on the watch. Pity because I was considering the Galaxy Note 20 or Galaxy Note S10+ as my next phone due to processor specs.
Once Knox is tripped, one cannot go back (though there is anecdotal discussion on some Samsung devices that people have had Knox reset to 0x0 after being tripped).
Sorry I could not be of more help.
Cheers,
B.D.
Hi guys !
I want to change the region to my active 1 to USA ? Is there Any chances To Change the region In watch active 1. And there is lots of stuff on watch active 2 not for watch active 1.
My Watch Model No. is
SM-R500
Tizen Version - 5.5.0.1
One UI watch Version- 2.0
Software Version- R500XXU1FUD1
Any Links as well as process required too please do Help in this . I seriously want to use Samsung Pay in watch active 1. And anybody have youtube link for watch active 1 change region please do share it.
Thanks
Works fine on my rooted Pixel 2 XL
I decided after my Note 4 finally died to exit the Samsung family and get on with life, they were making it just too hard to do anything if your are a tinkerer....
Neeham said:
Hi!
I was wondering if anyone managed to setup Samsung Pay on their galaxy watch active 2 while their phone is rooted.
I can't setup SPay on my watch since it requires setting it up on my galaxy s10+ phone which is rooted.
Maybe any bypass or any other suggestion?
Thank you!
Click to expand...
Click to collapse
I was able to get it to work on mine. Uninstall the Samsung pay plugin on your phone then reinstall it and use the magisk hide option in magisk to hide it from the 2 plugins I have in my screenshot. Close the magisk manager app and then try it. You have to be fast at signing in and adding a card. If it pops up with the error saying that your device is modified just close the Samsung pay app and open it again and keep going. If it keeps going you might have to block more of the plugins for the Samsung plugin in the magisk manager hide option.
Once you get it running, to keep it working across ROM's, if youre in the habit of flashing different ROM's, and want to keep your Samsung Pay working across flashes, along with the connection to the watch (without having to reset it), heres how i do it:
Keeping Watch Connection And Samsung Pay Across ROMs
This is currently how i keep my Galaxy Active 2 working - connected and Samsung Pay working - across ROM flashes without having to reset it every time, because resetting sucks Please note: At time of writing theres no known way to keep BP...
forum.xda-developers.com
The basic part is to set the same Android ID as when you first got it working....