I'd like to find a mount/dock/stand of some kind that would have a USB 3 cable that I could mount somewhere in my car where the Fold 2 could be open -- or closed and sitting tightly and not move around. The only ones I found so far would only work if it was closed. I even looked for ones for tablets but it doesn't look like there is much to choose from.
For my Note 8, I had two devices strapped together that locked into one of my cup holders about 10" high in the center area between the front seats. I could just sit the phone into for charging and Android Auto and easily view the screen if I needed to.
Go to www.Proclip.com. Get the tablet holder for up to 7.6 inches.
I saw this video looked decent ...https://youtu.be/1MBJkZR758Q
Edit I see it not in stock on Amazon
StormCell said:
Go to www.Proclip.com. Get the tablet holder for up to 7.6 inches.
Click to expand...
Click to collapse
Page not found?
You want this holder in Medium. You will need a mount.
https://www.proclipusa.com/product/spring-loaded-tablet-holder
This One Charges Wirelessly
This one should charge the Fold wirelessly when open. I have not gotten my Custom Fold 2 yet, but I bought this in anticipation.
It fits my current Note 10+ with a case so it should work with the Fold 2. Won't let me post an actual link.
amazon.com/gp/product/B07XCMFL3J/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
bpress said:
This one should charge the Fold wirelessly when open. I have not gotten my Custom Fold 2 yet, but I bought this in anticipation.
It fits my current Note 10+ with a case so it should work with the Fold 2. Won't let me post an actual link.
amazon.com/gp/product/B07XCMFL3J/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I too have a Note 10+ that I am considering upgrading to the Fold 2... Are you trading yours in for the $500 credit and going with Samsung finance??
Trade In
emtownsend said:
I too have a Note 10+ that I am considering upgrading to the Fold 2... Are you trading yours in for the $500 credit and going with Samsung finance??
Click to expand...
Click to collapse
YES!
It was the only way I could aford to do it. Money is tight, but I just had to have this phone. It is the first phone that I have been really excited about in years.
This one works for me with the phone opened or closed:
https://www.amazon.com/gp/product/B08DP6Y5NW/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
I'm using this one. Works great while it's fully open. The motorised clamp holds it in place.
We'll see if this can last long in terms of durability.
Thank you for sharing really excited to try this out! Do you have a link to this haven't been able to find it?
myth1001 said:
I'm using this one. Works great while it's fully open. The motorised clamp holds it in place.
We'll see if this can last long in terms of durability.
Click to expand...
Click to collapse
I love that, but wish it had a USB C plug instead of Qi charging for Android Auto.
Wade
Wadester said:
This one works for me with the phone opened or closed:
https://www.amazon.com/gp/product/B08DP6Y5NW/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Sweet. Thanks for the pics and the link!
I've been using this mount for years and years and it has lasted through lots of phones. Works great for the Z fold 2 also. I use it as a vent mount, but there are so many possibilities and so easy to change quickly. It takes a bit of working with to get it right, but I have used it for over 5 years in my current car and never have taken it out of the vent, just changed it a bit for each phone. Works perfect with it in open position. Not fancy or anything, just a holder. https://www.breffo.com/products/breffo-spiderpodium
myth1001 said:
I'm using this one. Works great while it's fully open. The motorised clamp holds it in place.
We'll see if this can last long in terms of durability.
Click to expand...
Click to collapse
Wadester said:
I love that, but wish it had a USB C plug instead of Qi charging for Android Auto.
Wade
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have it already, and I agree. It also has to go in "Buttons Down", which isn't terrible, but I'll live w/it and cut a slot in the left grab arm so I can Qi and USB, or flip it and use only USB. (Which is exactly what you want!)
HelloG3_MotoNoMore said:
I have it already, and I agree. It also has to go in "Buttons Down", which isn't terrible, but I'll live w/it and cut a slot in the left grab arm so I can Qi and USB, or flip it and use only USB. (Which is exactly what you want!)
Click to expand...
Click to collapse
Does it actually wirelessly charge?? In the video, whenever he had it in the mount, it was never charging??
---------- Post added at 07:39 PM ---------- Previous post was at 07:33 PM ----------
Just found this on YouTube...https://www.youtube.com/watch?v=350g6d_cTxg
Sent them an email to see how much it will cost shipped to US.
CtK4949 said:
Does it actually wirelessly charge?? In the video, whenever he had it in the mount, it was never charging??
Click to expand...
Click to collapse
HelloG3_MotoNoMore said:
I have it already, and I agree. It also has to go in "Buttons Down", which isn't terrible, but I'll live w/it and cut a slot in the left grab arm so I can Qi and USB, or flip it and use only USB. (Which is exactly what you want!)
Click to expand...
Click to collapse
I guess I wasn't quite clear enough? Buttons down = Qi charging works, but no button access.
---------- Post added at 07:49 PM ---------- Previous post was at 07:42 PM ----------
CtK4949 said:
Does it actually wirelessly charge?? In the video, whenever he had it in the mount, it was never charging??
---------- Post added at 07:39 PM ---------- Previous post was at 07:33 PM ----------
Just found this on YouTube...https://www.youtube.com/watch?v=350g6d_cTxg
Sent them an email to see how much it will cost shipped to US.
Click to expand...
Click to collapse
Here ya go...
HelloG3_MotoNoMore said:
I guess I wasn't quite clear enough? Buttons down = Qi charging works, but no button access.
---------- Post added at 07:49 PM ---------- Previous post was at 07:42 PM ----------
Here ya go...
Click to expand...
Click to collapse
Oh OK, thanks for the clarification and thanks for the link. The one from Amazon looks a little different. But at least I can get it much sooner than Aliexpress.
CtK4949 said:
Oh OK, thanks for the clarification and thanks for the link. The one from Amazon looks a little different. But at least I can get it much sooner than Aliexpress.
Click to expand...
Click to collapse
I'm pretty sure it's the same one. Aliexpress is likely selling a Chinese clone.
Related
I know you can purchase small tripods and clamps for Smartphones but of the ones I have seen the clamps only open up to 7cm.
The Galaxy Note however requires a wider 8.3cm
Therefore, has anyone seen a Tripod & Clamp suitable for the Galaxy Note?
Thanks in advance.
Beards
i want one too
but need one for Note + Hybrid case
i want one too
for video work
Im looking for one too! with a cover!
I made one myself from a Credit Card!
Hi,
I made one myself from a Credit Card!
Check This out:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.facebook.com/photo.php?f...=a.120610443632.94088.724543632&type=1&ref=nf
http://www.facebook.com/photo.php?f...=a.120610443632.94088.724543632&type=1&ref=nf
---------- Post added at 09:56 PM ---------- Previous post was at 09:55 PM ----------
another picture:
http://www.facebook.com/photo.php?f...=a.120610443632.94088.724543632&type=1&ref=nf
rorijam said:
Hi,
I made one myself from a Credit Card!
Check This out:
http://www.facebook.com/photo.php?f...=a.120610443632.94088.724543632&type=1&ref=nf
http://www.facebook.com/photo.php?f...=a.120610443632.94088.724543632&type=1&ref=nf
---------- Post added at 09:56 PM ---------- Previous post was at 09:55 PM ----------
another picture:
http://www.facebook.com/photo.php?f...=a.120610443632.94088.724543632&type=1&ref=nf
Click to expand...
Click to collapse
Dude. . .
Your Links are not opening.....
http://www.amazon.com/GTMax-Universal-Optical-Telescope-Jetstream/dp/B006YN7PEG
What about this one? Someone buy it and review please
Qvp said:
http://www.amazon.com/GTMax-Universal-Optical-Telescope-Jetstream/dp/B006YN7PEG
What about this one? Someone buy it and review please
Click to expand...
Click to collapse
Looks good? This cheap optical lenses intrigue me but don't know or if its worth the money. But looks like you can use that holder without the lenses.
What would you guys use one of these for?
Sent from my GT-N7000 using Tapatalk
Qvp said:
http://www.amazon.com/GTMax-Universal-Optical-Telescope-Jetstream/dp/B006YN7PEG
What about this one? Someone buy it and review please
Click to expand...
Click to collapse
I have a sneaky feeling it will not open wide enough to accommodate the Galaxy Note.
I know under the list of devices it mentions the Note but I'm skeptical of it's truth.
It's currently un-available to order on Amazon UK here.
I'll do a bit of reading later to see if I can find any further information on it's specifications.
The zoom lens doesn't interest me.... but the clamp and tripod yes.
http://www.aliexpress.com/product-f...e-and-universal-Mobile-Phone-wholesalers.html
youre right it doesnt fit. 7.5 cm max width
Qvp said:
http://www.aliexpress.com/product-f...e-and-universal-Mobile-Phone-wholesalers.html
youre right it doesnt fit. 7.5 cm max width
Click to expand...
Click to collapse
Sadly I thought as much..... So, we are back to square one on the search.
Tripod holder
I just purchased this from amazon. I will post pictures when I got it.
http://www.amazon.com/gp/product/B005LY9FVU
It can hold the phone vertically and can also be used with a tripod (like gorilla pod).
Also this year at macWorld I bought this (http://flygrip.com/)
It is perfect for the Note! can be used as a stand (a bit unbalanced)
antonioeram said:
I just purchased this from amazon. I will post pictures when I got it.
http://www.amazon.com/gp/product/B005LY9FVU
It can hold the phone vertically and can also be used with a tripod (like gorilla pod).
Also this year at macWorld I bought this (http://flygrip.com/)
It is perfect for the Note! can be used as a stand (a bit unbalanced)
Click to expand...
Click to collapse
Wow nice finds. Going to order the first one as well
Sent from my GT-N7000 using Tapatalk
antonioeram said:
I just purchased this from amazon. I will post pictures when I got it.
Click to expand...
Click to collapse
I'll be interested to read if it opens up wide enough to accommodate the Note.
I have the Zenus Mastrige Block Folio case. It has kickstand so i can use it as a tripod to take photos with timer.
captainhakan said:
I have the Zenus Mastrige Block Folio case. It has kickstand so i can use it as a tripod to take photos with timer.
Click to expand...
Click to collapse
Pleased this works for you.... but for me not a chance.
I need to be able to attach the clamp to a true tripod such as a Joby Gorillapod.
This allows you to put the phone into any angle you desire and have it held firmly in place.
http://www.breffo.com/
dehenry21988 said:
http://www.breffo.com/
Click to expand...
Click to collapse
Thanks but I'd rather not...... It frightens the bejeebers out of me!!
Beards said:
I'll be interested to read if it opens up wide enough to accommodate the Note.
Click to expand...
Click to collapse
Is the note not thinner than an iPhone which they show it holding? . Its a clamp and should work fine and looks like the best option thus far!
Sent from my GT-N7000 using Tapatalk
DOGSofDOOM said:
Is the note not thinner than an iPhone which they show it holding? . Its a clamp and should work fine and looks like the best option thus far!
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Normal clamps open to accommodate the 'Width' of the phone not the depth.
I couldn't make it out with this clamp but are you saying it is held by clamping the depth of the phone. If so surely that would mean clamping the back of the phone to the glass front?
Finally I found an awesome cover for my One X.
Edit: Link to site http://www.billigamobilskydd.se/
Edit: Price, 70 SWE KR (abt 10.3 USD)
The best part is that the risk of it slipping from your hand is very very minimal.
Cheap and good, and the design is pretty sweet
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hope ya like it!
Cheers
Where did you pick it up from?
Telling us that is't good and cheap and putting up nice pictures without giving us a link. That's trolling to me
That case can be ordered at amazon.co.uk or amazon.de incl. screenprotector and "sock"
They also have the clear one
Search for: Kolay htc one x
Bloody hell that is cheap & does look quite cool. Both are below from the UK Amazon site (95p each) :-
http://goo.gl/2gSQr
http://goo.gl/d1ypc
plus delivery £2.95
I have ordered this white one of ebay with free screen protector.
John
http://www.ebay.co.uk/itm/251040276515?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2648
MancUK said:
Bloody hell that is cheap & does look quite cool. Both are below from the UK Amazon site (95p each) :-
http://goo.gl/2gSQr
http://goo.gl/d1ypc
Click to expand...
Click to collapse
Looks like it's this one, but can't seem to find the black version, the one that is in black on the site doesn't have the cut out for the docking points.
http://www.amazon.co.uk/Yousave-Accessories-Protector-Micro-Fibre-Polishing/dp/B007JUMWEQ/ref=sr_1_fkmr1_3?s=electronics&ie=UTF8&qid=1334607501&sr=1-3-fkmr1
---------- Post added at 09:34 PM ---------- Previous post was at 09:26 PM ----------
Johnny0906 said:
Finally I found an awesome cover for my One X.
The best part is that the risk of it slipping from your hand is very very minimal.
Cheap and good, and the design is pretty sweet
Hope ya like it!
Cheers
Click to expand...
Click to collapse
Is it thick enough so the camera lens isn't touching anything it lies on?........looks from the pic that if laid on its back the lens may be flat on the surface it sits on?
I was looking was looking for the docking port cut out myself, until i released you most like cannot use it with a cover on anyway, cut out or not.
John.
craftycarper1 said:
Looks like it's this one, but can't seem to find the black version, the one that is in black on the site doesn't have the cut out for the docking points.
http://www.amazon.co.uk/Yousave-Accessories-Protector-Micro-Fibre-Polishing/dp/B007JUMWEQ/ref=sr_1_fkmr1_3?s=electronics&ie=UTF8&qid=1334607501&sr=1-3-fkmr1
---------- Post added at 09:34 PM ---------- Previous post was at 09:26 PM ----------
Is it thick enough so the camera lens isn't touching anything it lies on?........looks from the pic that if laid on its back the lens may be flat on the surface it sits on?
Click to expand...
Click to collapse
Tons of those on eBay, search for "one x cover s line". I've ordered 3 different cases, all hard. Don't really like those silicone ones..
I always buy gel cases, the silicone ones are a nightmare for collecting dust and fluff.
I would not have a hard case, as it gives no shock protection when you drop the phone, it does not absorb some of the impact as gel or silicone does.
John.
Presterin said:
Tons of those on eBay, search for "one x cover s line". I've ordered 3 different cases, all hard. Don't really like those silicone ones..
Click to expand...
Click to collapse
ynischa said:
Telling us that is't good and cheap and putting up nice pictures without giving us a link. That's trolling to me
Click to expand...
Click to collapse
I think you're the one trolling for not having patience my friend, I didnt think about where I got it because I got it from where I live, Sweden.
Website link: http://www.billigamobilskydd.se/ (Hope you read swedish).
craftycarper1 said:
Looks like it's this one, but can't seem to find the black version, the one that is in black on the site doesn't have the cut out for the docking points.
http://www.amazon.co.uk/Yousave-Accessories-Protector-Micro-Fibre-Polishing/dp/B007JUMWEQ/ref=sr_1_fkmr1_3?s=electronics&ie=UTF8&qid=1334607501&sr=1-3-fkmr1
---------- Post added at 09:34 PM ---------- Previous post was at 09:26 PM ----------
Is it thick enough so the camera lens isn't touching anything it lies on?........looks from the pic that if laid on its back the lens may be flat on the surface it sits on?
Click to expand...
Click to collapse
Just checked it out, and yes it is thick enough to NOT let the camera touch anything when its back is on a desk or whatever.
I have the exact same case on my galaxy nexus. It is pretty good for the price. However, im passing on this one since it doesnt protect the camera part.
Sent from my HTC One X using Tapatalk 2
ROCK hardcase nakedshell is really good. In fact, anything branded ROCK is GOOD.
and cheap too for my country, RM30 only.
Johnny0906 said:
I think you're the one trolling for not having patience my friend, I didnt think about where I got it because I got it from where I live, Sweden.
Website link: http://www.billigamobilskydd.se/ (Hope you read swedish).
Click to expand...
Click to collapse
the "" marks that I'm joking
Tack för länken!
ynischa said:
the "" marks that I'm joking
Tack för länken!
Click to expand...
Click to collapse
Inga problem!
Yes, I ordered the white version, 7p cheaper than the blue
What is the screen protector like Johnny0906 ????
John.
Johnny0906 said:
Just checked it out, and yes it is thick enough to NOT let the camera touch anything when its back is on a desk or whatever.
Click to expand...
Click to collapse
So my back cover has two electrical contacts, I swear wireless charging works.... hehe JK. You definitely need the right cover but the phone DOES support QI charging.
After I pre-ordered the G3 I ordered an OEM slim case from Korea, not realizing it had different electrical contacts than the US version. I read the Anandtech review, they had the 855, figured the US versions had it built in... Sadly, we know the story. So I pulled the wireless charging coil from the OEM slim case and moved it into my original back. It took me two tries to get it lined up but QI wireless charging does work. I have pics but I've only been a lurker on the forum so I can't upload pics. With the placement right now NFC doesn't work... but I mainly just wanted to confirm that QI worked.
I tested with two different QI chargers, both older that were designed with the Nexus 4. The nexus 4 orb wcp-400 and the flat wcp-700. Both were able to charge the G3. However, as others have reported the G3 is very picky about placement on the charger. On both chargers I get 'charging slowly' messages on most placements on the charger. It takes perfect placement for them to display a 'normal' charging message. However, I'm skeptical of these messages, because it does say that the phone IS charging and it didn't matter what charger I had connected, (1.8A, 2.4A, QI,good/bad placement) the estimated battery recharge time was exactly the same.... I'll do some tests and see how long it takes to charge from ~50%, with perfect placement and the non perfect placement too vs the cable.
So TLDR any of the US carriers QI back covers should enable wireless charging with the Tmobile 851. Maybe once I have enough posts I can upload pics. :cyclops:
I can also confirm that this back works for Qi wireless charging one the d851 - http://www.ebay.com/itm/151340368484?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
I am thinking of moving the coil to my Quickcircle- then I will have what they should of delivered...
My backplate will be here early next week. No carrier branding on it so win win
All of G3 varients support wireless charging...just matter of finding the right cover or grabbing the circle case
---------- Post added at 03:10 PM ---------- Previous post was at 03:10 PM ----------
arcanexvi said:
My backplate will be here early next week. No carrier branding on it so win win
Click to expand...
Click to collapse
Mind linking us? I want a gray one
mgbotoe said:
All of G3 varients support wireless charging...just matter of finding the right cover or grabbing the circle case
---------- Post added at 03:10 PM ---------- Previous post was at 03:10 PM ----------
Mind linking us? I want a gray one
Click to expand...
Click to collapse
I ordered the white one but there are links to Grey and Gold if needed on that page. Same seller. Just a heads up though, AT&T has locked theirs down so that it only supports powermat chargers not qi. The other 3 "should" be fine with this backplate.
Edit: suppose the link would help lol
http://m.ebay.com/itm?itemId=151340368484
personally looking for a stock back plate that'll work. the Quick Cover is nice and all, but I'd probably trash it like throwing money into the toilet.
Tidbits said:
personally looking for a stock back plate that'll work. the Quick Cover is nice and all, but I'd probably trash it like throwing money into the toilet.
Click to expand...
Click to collapse
That's what I just linked
Sorry I don't trust ebay at all. The first 5 times is my last 5 times
Not all, support Qi. AT&T's does PMA for some retarded reason.
They have a deal with PMA so of course they are going to request and push that standard.
Personally I think PMA and Qi need to be locked into a room and come up with a single standard.
PMA can suck it
charging through a case
anyone tried wireless charging through a slim case?
Um are the prices going to get lower than $40? I thought the back would be a cheap purchase.
Well got my cover today. Can confirm that it does work with QI charging . Unbranded is a double win. It's an actual LG cover intended for these units just before they stamp the carrier logo on it. Win win.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gpgorbosjr said:
Um are the prices going to get lower than $40? I thought the back would be a cheap purchase.
Click to expand...
Click to collapse
It's price gouging. Can't cost more then $3 to produce
anything in grey/metallic color with the strips yet? all I see are the white ones and gold for sale with the strips for charging the phone.
---------- Post added at 06:33 AM ---------- Previous post was at 05:52 AM ----------
arcanexvi said:
Well got my cover today. Can confirm that it does work with QI charging . Unbranded is a double win. It's an actual LG cover intended for these units just before they stamp the carrier logo on it. Win win.
Click to expand...
Click to collapse
what seller did u get that from. I notice there are ones on sale for $21.95 but only for white and gold at the moment. waiting on the grey metallic ones.
evilteo said:
anything in grey/metallic color with the strips yet? all I see are the white ones and gold for sale with the strips for charging the phone.
---------- Post added at 06:33 AM ---------- Previous post was at 05:52 AM ----------
what seller did u get that from. I notice there are ones on sale for $21.95 but only for white and gold at the moment. waiting on the grey metallic ones.
Click to expand...
Click to collapse
Grey keeps selling out rather fast as that color seems to be more popular. The listing for this one was http://m.ebay.com/itm?itemId=151340368484. All the ~$20 backplates I've seen are just replacements and don't have the charging coil, just NFC.
If you keep an eye on that seller they'll probably come back. When I ordered mine, all 3 colors were available.
1195
arcanexvi said:
Grey keeps selling out rather fast as that color seems to be more popular. The listing for this one was http://m.ebay.com/itm?itemId=151340368484. All the ~$20 backplates I've seen are just replacements and don't have the charging coil, just NFC.
If you keep an eye on that seller they'll probably come back. When I ordered mine, all 3 colors were available.
Click to expand...
Click to collapse
the black metallic ones are available now but from outside the US. I just bought one, hopefully I will get it within a month...lol will update when I receive it.:good:
evilteo said:
the black metallic ones are available now but from outside the US. I just bought one, hopefully I will get it within a month...lol will update when I receive it.:good:
Click to expand...
Click to collapse
by any chance can you help me out whit the link to it I've been looking on ebay found a couple off white ones and gold but not the black metallic whit the wireless charging
Sent from my LG-D851 using XDA Premium 4 mobile app
COCODRILO45 said:
by any chance can you help me out whit the link to it I've been looking on ebay found a couple off white ones and gold but not the black metallic whit the wireless charging
Sent from my LG-D851 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Here you go! :good:
http://www.ebay.com/itm/Rear-Cover-Back-Cover-Battery-Cover-LG-G3-D855-Metallic-Black-New-ORIGINAL-Brand-/161373824300?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item2592a1252c
I found a low price docking station in China Market and using it happily. Wanna share with all guys here. It only cost USD$4.00
http://item.taobao.com/item.htm?spm=a1z09.2.9.9.kAvndw&id=38478266696&_u=dlhf6d43a5e
i noticed OPO the charging port direction is the opposite direction than the others.
lunarken said:
i noticed OPO the charging port direction is the opposite direction than the others.
Click to expand...
Click to collapse
One of the images on the website:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wow! It would indeed fit given that the OPO MicroUSB port is oriented the sale as the One M8 :good:
I found the exact same one on Amazon for $10
http://www.amazon.com/gp/product/B00JLG0ZD6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I get it tomorrow. I'll update this when I use it.
UPDATE: Here it is... it's GREAT! For $10 it's a no brainer. It looks perfect with the phone.
Any luck to fit a phone with a generic tpu case inside the dock?
Pordilatis said:
Any luck to fit a phone with a generic tpu case inside the dock?
Click to expand...
Click to collapse
Yes. You can remove a part for plugging the phone with case
thanks... will order 1.
---------- Post added at 09:58 AM ---------- Previous post was at 09:51 AM ----------
this looks better
lunarken said:
thanks... will order 1.
---------- Post added at 09:58 AM ---------- Previous post was at 09:51 AM ----------
this looks better
Click to expand...
Click to collapse
But definitely doesn't fit OPO at all.
looks nice.
eBay link here:
http://www.ebay.com/itm/Desktop-Syn...l_Phone_PDA_Chargers&var=&hash=item4867f82c6f
Dusty Rhodes said:
I found the exact same one on Amazon for $10
http://www.amazon.com/gp/product/B00JLG0ZD6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I get it tomorrow. I'll update this when I use it.
UPDATE: Here it is... it's GREAT! For $10 it's a no brainer. It looks perfect with the phone.
Click to expand...
Click to collapse
http://www.ebay.co.uk/itm/Desktop-D...ories_MobilePhoneChargers&hash=item20e8c2a35a
Found the same one from ebay UK, but concerned about charging time being too long. Please let us know if it works, cheers.
johhn said:
http://www.ebay.co.uk/itm/Desktop-D...ories_MobilePhoneChargers&hash=item20e8c2a35a
Found the same one from ebay UK, but concerned about charging time being too long. Please let us know if it works, cheers.
Click to expand...
Click to collapse
Charging time will be identical since all you're doing is plugging your charger into the back of the dock to provide power.
ShadowClon3 said:
this one looks good. the seller not so much
http://www.ebay.com/itm/OnePlus-One...AU_MobilePhoneAccessories&hash=item3ce05c5e25
Click to expand...
Click to collapse
That usb plug looks backwards for the OPO. The tapered side needs to be towards the back or else the screen will face the wrong way. That dock is a no-go.
hka148 said:
I found a low price docking station in China Market and using it happily. Wanna share with all guys here. It only cost USD$4.00
http://item.taobao.com/item.htm?spm=a1z09.2.9.9.kAvndw&id=38478266696&_u=dlhf6d43a5e
Click to expand...
Click to collapse
looks like ill buy it here instead of the amazon link... time of shipping??
okay maybe ill use the amazon one.. i can't understand how to use the site even when translated LOL
Dusty Rhodes said:
Charging time will be identical since all you're doing is plugging your charger into the back of the dock to provide power.
Click to expand...
Click to collapse
Thanks for clearing that up. I've ordered it.
The reason I was asking is that I found some two of my spare USB cables are working differently when it comes to charging OPO.
One is from my battery pack so it's not working for data at all, but charges the phone normally from USB wall charger or laptop USB socket, however the one works for data normally but the charging takes twice as much.
Dusty Rhodes said:
That usb plug looks backwards for the OPO. The tapered side needs to be towards the back or else the screen will face the wrong way. That dock is a no-go.
Click to expand...
Click to collapse
This dock IS positioned the right way.....look through the pics....last one.....
rcdd said:
This dock IS positioned the right way.....look through the pics....last one.....
Click to expand...
Click to collapse
Sorry! I see. You are correct sir!
Can anyone confirm if it'll fit an OPO with a Distronics TPU case on? Pics please :victory:
is the phone supposed to sense that it's in the dock as opposed to just plugged in to charger?
johhn said:
http://www.ebay.co.uk/itm/Desktop-D...ories_MobilePhoneChargers&hash=item20e8c2a35a
Found the same one from ebay UK, but concerned about charging time being too long. Please let us know if it works, cheers.
Click to expand...
Click to collapse
Thx for the hint... bouhgt one in eBay!
If there's one thing that this beautiful watch is missing is a dedicated stand to protect your investment and also to have the ability to use the watch as a desk clock, while charging. We at Artifex Design have designed the first Huawei Watch stand to be sold on Ebay and Amazon. No more modifying apple stands or buying overly expensive adapters. The stand is 3D printed, which gives it a cool tech appeal and will even be a conversation starter as it sits on your desk at work. The stand is equipped with rubber feet to prevent sliding, and a Microsuede padding on top of the base to prevent the band from getting scratched up. Current pricing for forum members is 23USD shipped within the USA. Visit our website for more information at mod edit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Xda is not the place for advertising! If you broke the rules at least you can insert a link to the stand ! Maybe you don't have 10 posts....
Admin.....
No, I do not yet have 10 posts. Why can't a new relevant product be displayed here? This section of the website isn't very active, so any relevant posts should be allowed i would think.
calinormy said:
Xda is not the place for advertising! If you broke the rules at least you can insert a link to the stand ! Maybe you don't have 10 posts....
Admin.....
Click to expand...
Click to collapse
Because here we spend our time to learn something, to help somebody or get help.
I own huawei w1 and I am very interested in your product BUT you could post some pictures, details and NOT the price. You could give to us a relevant way to find your product online withoup self-advertising here....
---------- Post added at 05:11 PM ---------- Previous post was at 05:09 PM ----------
BTW we have a dedicated place for accesories
Ask an moderator to move your post where it belongs
OK, Thanks. Once we have 10 posts we will post up some pictures. I will get in in contact with the mods about moving the thread.
calinormy said:
Because here we spend our time to learn something, to help somebody or get help.
I own huawei w1 and I am very interested in your product BUT you could post some pictures, details and NOT the price. You could give to us a relevant way to find your product online withoup self-advertising here....
---------- Post added at 05:11 PM ---------- Previous post was at 05:09 PM ----------
BTW we have a dedicated place for accesories
Ask an moderator to move your post where it belongs
Click to expand...
Click to collapse
Post a link. I want a stand and I want it at discount price.
Scott said:
Post a link. I want a stand and I want it at discount price.
Click to expand...
Click to collapse
Here you go: http://artifexdesign3d.weebly.com/store.html
And here: https://www.reddit.com/r/hwatch/comments/40ib2x/preorder_sale_on_the_first_huawei_watch_charging/
I ordered the black one myself :good:
Do you have any that are smooth or are they all with the pattern?
Im looking for smooth one.
We have smooth ones in development and may be released soon.
Scott said:
Do you have any that are smooth or are they all with the pattern?
Im looking for smooth one.
Click to expand...
Click to collapse
Artifexdesign said:
We have smooth ones in development and may be released soon.
Click to expand...
Click to collapse
Cool, send me a message when you post them up.
The base looks a bit small. How sturdy is the stand? If for example my dog bumped my nightstand would the watch stand fall over? Thanks.
What is the weight on this? Looks like same design at the platinum from best buy for the Apple watch that I have converted. However that one is solid aluminum and has a nice solid weight. Is there a lead base in this to keep it upright?
Good questions^^^ awaiting a response..........
The base is roughly 2in x 1.5 inch. Its plenty stable for its purpose. The base is about .8 of an inch wider than one of the most popular Apple Watch stands sold on a major shopping website . After seeing how unstable that was between the narrow base and slippery felt under the base, we decided to give ours a wider platform and add rubber non slip feet. Obviously if you try to knock it over it will fall. Put it this way, I have four wild dogs living at my house, and I have been testing this stand for about a month and it has never toppled on me. Hope this helps!
Unfortunately I have yet to actually weight this, but if the math is correct, Length = mass / ( density x pi x ( diameter / 2 )^2 ), then this stand weighs in at around 3.14oz, which is .4oz heavier than a popular apple watch wood stand and about 1 oz heavier than the Maxboost aluminum apple watch stand, so its has considerable weight for what it is, no "lead" needed.
gottahavit said:
What is the weight on this? Looks like same design at the platinum from best buy for the Apple watch that I have converted. However that one is solid aluminum and has a nice solid weight. Is there a lead base in this to keep it upright?
Click to expand...
Click to collapse
Please check my responses, we would love the chance to earn your business. Thanks!
Hanger4life said:
Good questions^^^ awaiting a response..........
Click to expand...
Click to collapse
Detailed responses.
Artifexdesign said:
Please check my responses, we would love the chance to earn your business. Thanks!
Click to expand...
Click to collapse
Thanks for the response,worth the wait.
Just received mine - very nice - great work - fast shipping
Waiting for mine,but I ordered orange,and I'm in Thailand.
Well I can tell you that our prototype orange printed out awesome, as you can see from the pictures. I'd send you that one but it has one small defect on the side. Yours will be out soon though!
Hanger4life said:
Waiting for mine,but I ordered orange,and I'm in Thailand.
Click to expand...
Click to collapse