My device is Indonesian Android 10. I have twrp and root.
When I connect the device with the phone turned on normally, I cannot see the storage.
I see it at twrp and wifi ftp too.
The pc on the usb cable has no problem, tried it with another wire.
win x64 2004 20H1. but the problem is not caused by the pc. I made a full backup via twrp. as if this problem occurred after that.
please help
What is your pc processor? Have you updated your windows?
win x64 2004 20H1. but the problem is not caused by the pc. I made a full backup via twrp. as if this problem occurred after that.
Related
I've searched google/xda and no one seems to address this very clearly.
I was having problems connecting my SGSIII via USB to my computer(s). Yes, I was using the cable that came with the phone. When trying to simply transfer files via USB (MTP or PTP) windows would not recognize the phone and a message saying "usb device has malfunctioned" popped up from the notification area of the taskbar. I had all of the drivers installed. I tried connecting the phone to my laptop (thinkpad) and desktop (homebuilt) computers, which were both win7 64bit. I tried every single USB port of each computer. Sometimes the device would show up in my computer, but I couldn't access any of the files. I was able to get odin to recognize my phone, however, and (foolishly) tried to flash a rom to my phone. Odin would fail every time at a different point in the process. I was stuck with a phone that would not bootup.
Then, I tried a computer (old dell, win XP) at work. I tried to flash the rom with Odin again. On the third attempt it worked! (after changing to a back (instead of the front) USB port) It was a big relief that I didn't brick my phone. Also, with this computer I could connect to my phone via MTP or PTP. I thought, therefore, that the problem was win7. So, I went back, installed win XP on my computer at home. This computer would still not play nice with the phone. (USB device malfunctioned error appeared again.) So, if you're having problems try a different computer. I had to try 3 before I found one that worked.
TL;DR: Try a different computer and different USB ports on that computer before you give up on connecting your phone to a computer via USB.
Finally, I NEVER had these problems with my HTC Hero, or HTC Evo. The phone would connect to ANY computer or ANY USB port. This was true for transferring files and for ADB also. With my S3 I'm transferring files by removing the SD card and connecting that to my computer. Kind of a pain in the ass. Thanks samsung.
Hello!
I unlocked bootloader in my SXS yesterday and installed OpenSEMC Beta 3. Everything looks fine but I can't connect to pc with usb cable in file transfer mode. I don't see it in My Computer. I can only use fastboot mode. Tried on other OSes on other computers- same thing. PC Comanion doesn't see it as well. Tell me what to do. My backups of stock rom are in CWM location but now is TWRP installed on my device. Help!
I downloaded to phone OpenSemc beta-3 (earlier was 3.2) and installed. And problem with connection was gone I hope it will help someone.
Hi,
I'm having some issues where the MTP driver fails to load. Tried all the obvious stuff and did a lot of reading of forums and stuff but can't find a fix. Could anyone help me to fix it please?
Here's what hardware I have and what I've tried so far:
Tab Pro 8.4 16gb wifi UK model, rooted.
Connected via cable to Dell XPS 17, latest USB drivers installed, win 7 x64.
First of all, I enabled USB debugging and windows installed drivers for all except MTP.
Tried installing the Samsung driver package, same problem. Uninstalled at present.
Installed kies, didn't work, wouldn't even connect to the device. Uninstalled.
Followed the instructions on the wiki but the suite software installs the driver succesfully but then windows won't accept the driver. Tried the workarounds in the wiki but still no luck.
Tried rebooting the tablet and leaving the cable connected.
Tried wiping the cache.
Tried restarting both the tablet and laptop after reinstalling software and drivers, still no luck.
Found several workarounds on my travels, one was a command line for windows to add to usergroup ( it's on the laptop downstairs, will add it to the post tomorrow).
One post said to change a registry entry...really? Tried that, and another registry trick, but still no.
Using the same laptop, I had similar problems trying to flash a custom rom onto an s4, but the CM installer worked first time. I've done a fresh install of win 7 since then.
Can anyone shed any light on this for me please? Is there any kind of workaround? Running out of ideas!
Thanks
Fixed this, well, kind of. Here's a quick rundown of what I did, for people like me who are struggling with connection problems.
I thought I had tried everything, was going to dump the whole thing and then remembered that I'd fixed some previous USB problems (sound card) by doing a clean boot.
First, remove Kies.
The only other thing that is required are the samsung mobile drivers from their website. I tried with and without and this would only work with them installed.
Restart your tablet, make sure MTP is selected.
You can find out how to do a clean boot for you version of windows here.
Leave your device connected via USB cable. Once you have clean booted into windows, windows will attempt to install the drivers from windows update, let it do this. It can take a minute or two to complete. You should then see a green tick in the notification area rather than the dreaded red cross.
If, for some reason, the driver doesn't install first time, you can unplug and then plug back in the USB cable and this should do the trick.
What I did find, is that the connection wasn't consistent, I could restart either my laptop or tablet and then it wouldn't connect, so I'd have to go through the above process again to get it to connect.
Doing this allowed me to flash the Clockworkmod recovery with odin 3.09, but for whatever reason, I was still unable to use the recommended Eimdall suite to flash cyanogenmod.
In the end, I downloaded the CM11 zip file to my tablet (via http) and then used ES file manager to move it to the SDCard root and then clockworkmod picked it up from there.
Also, once CM was installed, there were no connection problems at all, as far as I can see.
Hopefully this will help others in the same predicament.
Once I installed the USB Mass Storage enabler zip on stock Lollipop, now whatever rom I flash (be it stock or custom), MTP is not working, though the PC detects the phone when it is connected through the usb.
Please help...
Driver is not installed duly
tamalnag said:
Once I installed the USB Mass Storage enabler zip on stock Lollipop, now whatever rom I flash (be it stock or custom), MTP is not working, though the PC detects the phone when it is connected through the usb.
Please help...
Click to expand...
Click to collapse
Employ USB driver tool by googling this would resolve your agony.
Regards,
689alza
alza689 said:
Employ USB driver tool by googling this would resolve your agony.
Regards,
689alza
Click to expand...
Click to collapse
Thanks for your reply, but drivers are already installed.
When I'm connecting to a different laptop running Windows 10 (where drivers are not installed), there the MTP is working normally.
But not in my laptop running Windows 7.
tamalnag said:
Thanks for your reply, but drivers are already installed.
When I'm connecting to a different laptop running Windows 10 (where drivers are not installed), there the MTP is working normally.
But not in my laptop running Windows 7.
Click to expand...
Click to collapse
Uninstall the drivers on the laptop with Win 7 and reboot the laptop, thereafter reinstall the drivers using the tool stated above for MTP . Occasionally the drivers are not installed duly (i.e. Device manager may not indicate the exclamation (We may presume the drivers are appropriately loaded,when in fact the contrary usually occurs) mark or error for the driver) but the transfer of data will be precluded.
Uninstall and reinstall the drivers for Win 7 laptop for resolution.
Thank you
689alza
Hey guys,
I'm facing a problem: my W10 PC won't install the phone's usb drivers at all. It stay with the yellow sign and can't find the drivers anywhere - not even through Win Update.
I searched for them everywhere I could and without any positive results.
Do you know or have the USB drivers for this phone so I can install them manually?
On my laptop, there are no problems and I tried exporting all the drivers installed on the laptop and load them onto the PC but didn't find any driver so the PC could extract them. I can't access my internals on my PC cause of this.
Anyone?
Thanks in advance.
Solved: Apparently, Windows 10 Home Ed. is not capable of installing any kind of USB drivers (MPT, file transfer, fastboot, USB-debugging - nothing worked) for the device but re-installing with the Windows 10 Pro version, the phone got detected instantly and fully without any problems. Razer CC wasn't helpful at all, this time.