Hello!
I unlocked bootloader in my SXS yesterday and installed OpenSEMC Beta 3. Everything looks fine but I can't connect to pc with usb cable in file transfer mode. I don't see it in My Computer. I can only use fastboot mode. Tried on other OSes on other computers- same thing. PC Comanion doesn't see it as well. Tell me what to do. My backups of stock rom are in CWM location but now is TWRP installed on my device. Help!
I downloaded to phone OpenSemc beta-3 (earlier was 3.2) and installed. And problem with connection was gone I hope it will help someone.
Related
Hi guys,
Just got my new note 2 (international-n7100). I first updated to jb 4.1.2.
Then rooted the phone after several tries to detect drivers (install/uninstall etc).
After that installed rom manager and ROM toolkit pro.
I never achieved to boot in cmw through ROM manager or by using the 3 keys combination, I keep getting the default android boot.
Tried everything to reflash cmw with adb or Odin but now my PC says drivers are not recognized because of a "corrupted attempt to connect the device before" (use win 7, changed usb ports, tried different pc).
I uninstalled every drivers, kies and reinstall either directly from Samsung or using toolkit for note 2.
Nothing...
Please help, I need to get my phone conected to the PC so that I can boot in cmw and backup my ROM.
Thanks
I am having a hell of a time trying to get my phone back to a fully operable phone. I was running SlimBean but had GPS issues so I switched to Carbon. GPS works, but MMS (sending AND receiving) and data connection after WiFi disconnect doesn't work. But now my real problem is not being able to flash a new ROM. I hoped to install a 4.4 ROM, but that requires me to install an update to my recovery. When I boot to bootloader, I select Fastboot (it is highlighted in red), but it does nothing to allow me to install a newer .IMG. Am I missing something?
Not only that, but I'm not able to get my phone to be recognized by the computer that I previously never had an issue with. The phone charges via USB but is not visible by the computer. I've turned on USB debugging in settings, but the computer does not even see it as a device in Device Manager. Is it possible that I've fouled something up physically on my USB port or is it a software/ROM issue? I have even installed a stable 4.3 ROM (cyanogen), and I still can't get the PC to see that I'm connected.
Anyone have any ideas?
Try Flashify from the market to flash the recovery img.
Sent from my Galaxy Tab 10.1
dear all, my first post here @xda
i am using ignorance v4 on my htc one v and i trying to move to shpongle.i did everything.i flash the kernel before flashing the ram but after the rom flash, when i go to fastboot mood, my laptop says cannot recognize the device by saying maybe the device is not working properly try reconect the device. I have all drivers installed and before this i used many roms but never faced this problem.android sdk installed.al in one toolkit and every other option.when i go to the adb or fastboot whatever you say, the laptop stop recognizing my device.it works when my phone is in normal mode and i can transfer files or anything.htc sync manager is also there.I can reinstall the ignorance from my sd card and it works normally.but shpongle stucks on boot screen, which mean i need to flash the kernel.but how can i flash the kernel file.it stop recognizing usb connection when i try to connect fastboot usb.
i change ports,laptop, cable but nothing works.
plz plz help me on this,i cant go back to stock rom in this situation
Can I get some help guys? My phone got bricked after I stupidly installed Chainfire3D, the phone is in a boot loop state for now.
My phone's firmware version is 6.1.A.2.55 and I have an unlocked bootloader, my CWM was gone after flashing 6.1.A.2.55 before but my phone is unlocked and it's USB Debugging is turned ON before I bricked it.
After 2 days of researching, here's what I've got (and tried):
My phone's vibrator is not functioning so I don't know how many times my phone vibrate when I hold Power + Volume Up.
My phone's USB port is faulty, it charges but it can't be recognized on a computer then I found a guide here on the forum about cleaning the USB port using a toothpick, and I think it's working fine now.
I am using Windows 8.1 Pro 64-bit and I found out that there are issues regarding the ADB drivers, I tried some solutions I found online but my phone is still not detected.
I installed a bootable Windows 7 SP1 64-bit on a external HDD and tried to use Flashtool there. I installed the Fastboot, Flash Mode, Xperia Acro S drivers from C:\Flashtool\drivers and still my phone is not detected.
I tried to install Flashtool again from my girlfriend's computer, Windows 7 64-bit, my phone is detected in Flash Mode but can't stay there for long, it will exit Flash Mode then goes to charging, unlike in Fastboot wherein it stays there.
Tried installing Flashtool again from my mom's computer and borrowed her USB cable, it stays in Flash Mode then I tried to flash LT26w_1265-3909_6.1.A.2.55_GENERIC-user_CUST_1266-3278_R4G from there, but it stops with an error Error processing loader.sin, again I did some research about it and then I tried flashing it again, but this time Flashtool didn't gave me an error but it stops at Checking header right after Processing loader.sin
I also tried to flash only the kernel.sin on Fastboot mode but the Flashtool crashed.
Again, from my mom's computer, I installed Sony PC Companion, it was detected as Xperia Acro HD but my mom's computer don't have internet so I wasn't able to try to repair from there.
I also have another question, could it be that my USB port is not functioning? Are there any other methods to make my USB function again aside from bringing it to a service center?
0x013666f said:
Can I get some help guys? My phone got bricked after I stupidly installed Chainfire3D, the phone is in a boot loop state for now.
My phone's firmware version is 6.1.A.2.55 and I have an unlocked bootloader, my CWM was gone after flashing 6.1.A.2.55 before but my phone is unlocked and it's USB Debugging is turned ON before I bricked it.
After 2 days of researching, here's what I've got (and tried):
My phone's vibrator is not functioning so I don't know how many times my phone vibrate when I hold Power + Volume Up.
My phone's USB port is faulty, it charges but it can't be recognized on a computer then I found a guide here on the forum about cleaning the USB port using a toothpick, and I think it's working fine now.
I am using Windows 8.1 Pro 64-bit and I found out that there are issues regarding the ADB drivers, I tried some solutions I found online but my phone is still not detected.
I installed a bootable Windows 7 SP1 64-bit on a external HDD and tried to use Flashtool there. I installed the Fastboot, Flash Mode, Xperia Acro S drivers from C:\Flashtool\drivers and still my phone is not detected.
I tried to install Flashtool again from my girlfriend's computer, Windows 7 64-bit, my phone is detected in Flash Mode but can't stay there for long, it will exit Flash Mode then goes to charging, unlike in Fastboot wherein it stays there.
Tried installing Flashtool again from my mom's computer and borrowed her USB cable, it stays in Flash Mode then I tried to flash LT26w_1265-3909_6.1.A.2.55_GENERIC-user_CUST_1266-3278_R4G from there, but it stops with an error Error processing loader.sin, again I did some research about it and then I tried flashing it again, but this time Flashtool didn't gave me an error but it stops at Checking header right after Processing loader.sin
I also tried to flash only the kernel.sin on Fastboot mode but the Flashtool crashed.
Again, from my mom's computer, I installed Sony PC Companion, it was detected as Xperia Acro HD but my mom's computer don't have internet so I wasn't able to try to repair from there.
I also have another question, could it be that my USB port is not functioning? Are there any other methods to make my USB function again aside from bringing it to a service center?
Click to expand...
Click to collapse
Instead of trying to install rom, try installing cwm, then if cwm is installed and working, you can use that to flash zip through sideload from pc.
Mufrad said:
Instead of trying to install rom, try installing cwm, then if cwm is installed and working, you can use that to flash zip through sideload from pc.
Click to expand...
Click to collapse
Okay sir I will try your suggestion, thanks. Can I install CWM using an SD card?
By the way, I brought my phone at the Sony Service Center here, they told me that they can not repair my phone since their computer couldn't detect it and the phone's problem is the motherboard. My phone has dents on it, so I'm pretty sure that they used it as a reason. And also, they told me that my phone was rooted. I was so frustrated because I know that my phone's problem is the USB since the phone charges and goes into bootloop after installing Chainfire3D.
Hi folks,
I previously managed to get Cyanagenmod installed on my HTC One X but since made a mess of it trying to get a stock ROM on there (to unlock my SIM). I have since given up on getting a stock ROM back on there and am now trying to get Cyanogenmod back on there, but I have hit some problems.
I have CWM on there and my PC can see the phone in Fastboot, but not via ADB (which I am trying to use to 'push' the ROM on there so I can install it). My PC (Win 8.1) is giving me a "device descriptor request failed" when connecting to USB when on the boot menu, and is showing up just as "One" in device manager when I load CWM. However neither of these situations are allowing my computer or ADB to recognise the SD card.
I have tried 'mounting' it in CWM, updating drivers through device manager, installing Sync (and uninstalling/reinstalling it), installing HTCDriver_4.10.0.001.msi all to no avail.
Does anyone have any advice to get my PC to recognise my phone or otherwise get a customer ROM installed (if there is another way.)
Thanks in advance all.
Bglamb said:
Hi folks,
I previously managed to get Cyanagenmod installed on my HTC One X but since made a mess of it trying to get a stock ROM on there (to unlock my SIM). I have since given up on getting a stock ROM back on there and am now trying to get Cyanogenmod back on there, but I have hit some problems.
I have CWM on there and my PC can see the phone in Fastboot, but not via ADB (which I am trying to use to 'push' the ROM on there so I can install it). My PC (Win 8.1) is giving me a "device descriptor request failed" when connecting to USB when on the boot menu, and is showing up just as "One" in device manager when I load CWM. However neither of these situations are allowing my computer or ADB to recognise the SD card.
I have tried 'mounting' it in CWM, updating drivers through device manager, installing Sync (and uninstalling/reinstalling it), installing HTCDriver_4.10.0.001.msi all to no avail.
Does anyone have any advice to get my PC to recognise my phone or otherwise get a customer ROM installed (if there is another way.)
Thanks in advance all.
Click to expand...
Click to collapse
Flash Philz 5.15.9 recovery use it to mount sd card then to copy the rom you need then flash recovery for your rom for CM12 is one for CM11 is other and for Sense is third. For sense rom you can use Philz 5.15.9. And for the new layout is fourt recovery
Thanks!
I couldn't find it so I downloaded a newer version, but it didn't work, so I looked for longer and found a version, but that wouldn't even boot. In the end I used openrecovery-twrp-2.1.7, which did let me mount the SD and install the ROM.
Then I got stuck on the loading screen, but I discovered I needed to just flash a boot.img (which wasn't in either of the guides I was following, for some reason?!) and now I'm all up and running.
Thank you kind sir!