My LG G7 phone enters edl mode, my computer does not recognize it. At first it received qualcomm port 9008 but when I ran QFIL it was no longer recognized
Keep trying change port reinstall drivers
Related
Did anyone managed to unbrick his lg g3 in following mode and how ?
No boot, No recovery, No fastboot or download mode working, phone is completely in dead boot state,
and is recognized as lge androidnet usb serial port, when connected to PC
not as Qualcomm HS-USB QDLoader 9008 ,
kindly help me if you can.
thank you
aeroexpert said:
Did anyone managed to unbrick his lg g3 in following mode and how ?
No boot, No recovery, No fastboot or download mode working, phone is completely in dead boot state,
and is recognized as lge androidnet usb serial port, when connected to PC
not as Qualcomm HS-USB QDLoader 9008 ,
kindly help me if you can.
thank you
Click to expand...
Click to collapse
Search in this forum about "Qualcomm 9008".
But you need to disassembly a little parts of your phone and... you need a little piece of wired.
Good Luck!:good:
I need help getting my phone into the correct mode to be recognized by Windows as a Diagnostic PORT, so the phone registers in QPST.
The phone works for ADB and storage in charging mode and MTP mode, respectively.
However, the phone is not detected at all when i choose RNDIS mode, which I understand is the necessary setting to configure a diagnostic port for QPST.
- I have also tried booting in BP TOOLS from fastboot, same results.
Motorola Device Manager is installed, phone is XT1676 3GB/16GB running LineageOS 14.1 with superuser, TWRP.
did uh find any solution bruh same problem is goin on with me !!!???
So,
Now I got the issue that was the main culprit of the error happening while flashing in EDL mode through mi flash tool .. .
Current status of my phone- Nothings working no buttons working
Black screen
When I connect to PC blue led flashes. Without battery red led flashes only one time
Phone detects as Qualcomm HS USB qdloader 9008 port
And after that when I try to flash it .. the port kepps refreshing and the phone connects and disconnects...
On the device manager it seems that the qdloader 9008 converts into diagonastics 9006 then reverts back to 9008. And in the disk management the Qualcomm mmc storage do the same just connects and 2 or 3 second later disconnects. Then reconects and disconnects..
And at that point the flash tool gives the error....
Changing usb wire and changing pc gives the same result .
Now please suggest me a way to get rid out of it.
The thread is very long sorry for that ....
Please help me out .
Windows driver issue maybe?
Are you sure that this is not a driver problem in Windows?
I have never tried flashing in Download Mode, but I'm just making a (possibly silly) guess.
Enable Test-signing in Windows and try again :-
Put this command in an elevated command prompt and restart the computer to enable test signing:-
Code:
bcdedit /set testsigning on
Good luck!
First trying with disable driver signature enforcement from boot option and now tried with cmd ran the code but same result. Is this my windows 7 problem?
I haven't tried it on windows 10....
My Rmx1901 has bricked. It's no boot, no fastboot. When it was been pluged in computer, it show "unknow device". I installed all usb driver, qualcomn driver. I need a board to test point qualcomn 9008 edl. Everybody help me?!!! Thaks all !
did you fix your phone? im facing this problem. help]
did you fix your phone? im facing this problem. help]
It stay in edl mode
It stay in edl mode or connect disconnect happen after plugging in to computer
I broke my device, I cannot flash rom in fastboot , and I found a solution by removing the battery, connecting two points and then connecting the device to PC to show me " Qualcomm HS-USB QDLoader 9008 " appeared to me but it does not appear in miflash or any another flash tool
cescer4 said:
I broke my device, I cannot flash rom in fastboot , and I found a solution by removing the battery, connecting two points and then connecting the device to PC to show me " Qualcomm HS-USB QDLoader 9008 " appeared to me but it does not appear in miflash or any another flash tool
Click to expand...
Click to collapse
Please Help Me