My Rmx1901 has bricked. It's no boot, no fastboot. When it was been pluged in computer, it show "unknow device". I installed all usb driver, qualcomn driver. I need a board to test point qualcomn 9008 edl. Everybody help me?!!! Thaks all !
did you fix your phone? im facing this problem. help]
did you fix your phone? im facing this problem. help]
It stay in edl mode
It stay in edl mode or connect disconnect happen after plugging in to computer
Related
Hello, I can't get into Quallcom 9008 mode. My phone is bricked. Won't turn on. When I plug it via USB and make a testpoint, Windows show notification 'Device not recognized' I'm using Windows 10 64 bit, can you help me? How to unbrick my phone
benmon152 said:
Hello, I can't get into Quallcom 9008 mode. My phone is bricked. Won't turn on. When I plug it via USB and make a testpoint, Windows show notification 'Device not recognized' I'm using Windows 10 64 bit, can you help me? How to unbrick my phone
Click to expand...
Click to collapse
Are you shorting the phone with or without the battery plugged in? I think you need to unplug the battery before shorting the pins
Sent from my LG-D800 using Tapatalk
I tried with battery and without. Any more solutions?
Did anyone managed to unbrick his lg g3 in following mode and how ?
No boot, No recovery, No fastboot or download mode working, phone is completely in dead boot state,
and is recognized as lge androidnet usb serial port, when connected to PC
not as Qualcomm HS-USB QDLoader 9008 ,
kindly help me if you can.
thank you
aeroexpert said:
Did anyone managed to unbrick his lg g3 in following mode and how ?
No boot, No recovery, No fastboot or download mode working, phone is completely in dead boot state,
and is recognized as lge androidnet usb serial port, when connected to PC
not as Qualcomm HS-USB QDLoader 9008 ,
kindly help me if you can.
thank you
Click to expand...
Click to collapse
Search in this forum about "Qualcomm 9008".
But you need to disassembly a little parts of your phone and... you need a little piece of wired.
Good Luck!:good:
Hello...
i've got a bricked phone from a friend of mine because he's out of options to put it back to fully function.
he told me that he had flashed the phone while it was in 9008 usbbulk whith a recovery thats not suitable for this
phone. now the only thing the phone is doing is turn backlight on when connect to pc ... it will not be recognized. all drivers are installed .... windows runs on test mode with no verfication for drivers or else ... is it possible to rescue the phone or is it good white brick ?
Phone Data:
LG K10 (420N)
16 GB
TheRazcall said:
Hello...
i've got a bricked phone from a friend of mine because he's out of options to put it back to fully function.
he told me that he had flashed the phone while it was in 9008 usbbulk whith a recovery thats not suitable for this
phone. now the only thing the phone is doing is turn backlight on when connect to pc ... it will not be recognized. all drivers are installed .... windows runs on test mode with no verfication for drivers or else ... is it possible to rescue the phone or is it good white brick ?
Phone Data:
LG K10 (420N)
16 GB
Click to expand...
Click to collapse
Do you see anything in device manager?
No... device manager shows nothing and there is no satisfaing "da ding" noise after plug in the USB to my PC...
So,
Now I got the issue that was the main culprit of the error happening while flashing in EDL mode through mi flash tool .. .
Current status of my phone- Nothings working no buttons working
Black screen
When I connect to PC blue led flashes. Without battery red led flashes only one time
Phone detects as Qualcomm HS USB qdloader 9008 port
And after that when I try to flash it .. the port kepps refreshing and the phone connects and disconnects...
On the device manager it seems that the qdloader 9008 converts into diagonastics 9006 then reverts back to 9008. And in the disk management the Qualcomm mmc storage do the same just connects and 2 or 3 second later disconnects. Then reconects and disconnects..
And at that point the flash tool gives the error....
Changing usb wire and changing pc gives the same result .
Now please suggest me a way to get rid out of it.
The thread is very long sorry for that ....
Please help me out .
Windows driver issue maybe?
Are you sure that this is not a driver problem in Windows?
I have never tried flashing in Download Mode, but I'm just making a (possibly silly) guess.
Enable Test-signing in Windows and try again :-
Put this command in an elevated command prompt and restart the computer to enable test signing:-
Code:
bcdedit /set testsigning on
Good luck!
First trying with disable driver signature enforcement from boot option and now tried with cmd ran the code but same result. Is this my windows 7 problem?
I haven't tried it on windows 10....
My LG G7 phone enters edl mode, my computer does not recognize it. At first it received qualcomm port 9008 but when I ran QFIL it was no longer recognized
Keep trying change port reinstall drivers