Develop Bugs

[GUIDE] Unbrick Your Galaxy Y

This Guide Will Show you how to Unbrick your Galaxy Y​
Things That You Need:
*A Computer(Windows XP, Windows 7, Windows Vista, Windows 8, Windows 10)
*A USB Cable
*Properly Installed Samsung USB drivers to Connect your phone to Computer Click the Link below to download Samsung USB Drivers
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
*Odin 1.84/Odin1.85 Click The Link Below to Download Odin
http://forum.xda-developers.com/showthread.php?t=1262272
Disclaimer: I'm not responsible for any damage done to your phone.
Note: Samfirmware doesn't let you download Stock Roms for Galaxy Y anymore as it is an old device. Updated the guide below since I found another way on how to get the Stock Rom, It might be longer than usual but its the only way to ensure that we get the Official Stock Rom. I no longer have the device(GT-S5360) but the software that I found is the one that I use to download Stock Rom for my old device.
Instructions
1.Download the software below so we can download the Stock Rom. Click on the link then click the Blue Download Button
http://www.mediafire.com/file/2xtp37e2lq4w8wm/Frija-v1.4.2.zip/file
2.Open the Zip File then Extract the files to your folder of Choice or drag and drop it to another folder
3.Go to the Folder where you extracted the files then right click on Frija.exe then press Run as Administrator then press Yes if prompted.
4. Now the Frija Interface will show up. Make sure the Auto Box has Check on it. Now, You should focus only in Model Section and the CSC Section. On the Model Section, Type in GT-S5360.
5. For the CSC Section, We need to search this based on the country of your phone or where you bought the phone. Here is the link: https://www.sammobile.com/samsung/galaxy-y/firmware/#GT-S5360 . Now once you opened the link, You'll need to find the Country/Carrier of the Country where you bought the phone and Carrier too if you bought it of a Carrier. Now once you found the your Country, Tap on the name of the Country and then look for Product Code. You can find below an example of the Product Code so you have a guide on how to find It. Once you found the Product Code, Go back to Frija and then on the CSC Section, Type it in then once your done. Press Check Update.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Now the boxes below the Frija Software will automatically generate the Information of the Stock Rom, Then on the Lower of the Frija Software, Press Download button.
7.A dialog box will show up where you want to save the Stock Rom then once you're done, Press Save.
8. The download will start then wait until it says Download Complete.
9. Go to the Location where you chose to save the Stock Rom then double click on the Zip file.
10.Extract The Zip File You Downloaded Above
11.Open Odin 1.85(Windows 7 Run as Administrator)
(Locate the Firmware files, The Zip files we extracted)
12.Click PDA - PDA_S5360_*****.tar.md5
13.Click Phone - MODEM_S5360_*****..tar.md5
14.Click CSC - CSC_S5360_******.tar.md5
15.Now turn off your Galaxy Y {Remove the battery}
16.Now attach/connect your phone to computer via USB cable.
17.Press and Hold Volume Down button+Home button+Power button for 5 Seconds
18.Now you booted up on Download mode, Press Volume Up button to Continue
19.Wait for a Yellow text to appear
20.Click Start
21.And let ODIN do its work and wait till you see PASS in green color, it means the flashing process is completed successfully
22.You Sucessfully Flashed your phone..!!
23.Insert the battery and Boot up your phone and Enjoy..!!
Comment for Any Problems?? Thank You
Device:Samsung Galaxy Y GT-S5360
Rom:Lenox Evolution 2.2
Kernel:Savie Kernel
Device:Samsung Galaxy S Duos 2 GT-S7582
Rom:Stock Jellybean 4.2.2
Kernel:Stock kernel
Device:Samsung Galaxy J2 SM-J200GU
Rom:Stock Lollipop 5.1.1
Kernel:Stock kernel
Device:Samsung Galaxy J7 Core SM-J701F
Rom:Stock Oreo 8.1.0
Kernel:Stock kernel
Device:Samsung Galaxy A50 SM-A505GN/DS
Rom:Stock Pie 10
Kernel:Stock kernel
Sent from SM-J200GU using Tapatalk 2

you should change following things..
1) you can do this procedure in windows 8
2) its not neccessary that battery must be fully charged.....
you can do whole procedure by removing battery too....
so edit above things....
Sent from my GT-S5360

LetJect said:
you should change following things..
1) you can do this procedure in windows 8
2) its not neccessary that battery must be fully charged.....
you can do whole procedure by removing battery too....
so edit above things....
Sent from my GT-S5360
Click to expand...
Click to collapse
YUP! BROTHER THE WHOLE PROCESS IS ALSO RUN WHEN WE REMOVE THE BATTERY.....CAUSE ODIN FLASH DOES NOT REQUIRE A PHONE WITH BATTERY.....
FOR YOUR KIND INFORMATION Hikachu321 --CONNECT THE PHONE WITHOUT A BATTERY WITH PC BY DATA CABLE;AND PRESS VOL DOWN+POWER+HOME KEY TOGETHER...THEN YOUR PHONE AUTOMATICALLY GOES TO ODIN MODE WITHOUT A SINGLE BATTERY.....
BUT THANKS FOR THE GUIDE......

I Tried to remove the battery to enter to download mode and it works!! Well anyways I updated the guide!!
Device:Samsung Galaxy Y GT-S5360
Rom:Lenox evolution V2
Kernel:Savie kernel#73
Sent from my GT-S5360 using Tapatalk 2

hikachu321 said:
This Guide Will Show you how to Unbrick your Galaxy Y​
Things That You Need:
*A Computer(Windows XP,Windows 7,Windows Vista,Windows 8)
*A USB Cable
*Properly Installed Samsung USB drivers to Connect your phone to Computer Click the Link below to download Samsung USB Drivers
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
*Odin 1.84/Odin1.85 Click The Link Below to Download Odin
http://forum.xda-developers.com/showthread.php?t=1262272
Disclaimer: I'm not responsible for any damage done to your phone.
Instructions
1.Download the firmware of Your Country Click The Link Below
http://forum.xda-developers.com/showpost.php?p=21846620&postcount=1
2.Extract The Two Zip Files You Downloaded Above
3.Open Odin 1.85(Windows 7 Run as Administrator)
(Locate the Firmware files)
4.Click PDA - PDA_S5360_*****.tar.md5
5.Click Phone - MODEM_S5360_*****..tar.md5
6.Click CSC - CSC_S5360_******.tar.md5
7.Now turn off your Galaxy Y {Remove the battery}
8.Now attach/connect your phone to computer via USB cable.
9.Press and Hold Volume Down button+Home button+Power button for 5 Seconds
10.Now you booted up on Download mode, Press Volume Up button to Continue
11.Wait for a Yellow text to appear
12.Click Start
13.And let ODIN do its work and wait till you see PASS in green color, it means the flashing process is completed successfully
13.You Sucessfully Flashed your phone..!!
14.Insert the battery and Boot up your phone and Enjoy..!!
Comment for Any Problems?? Thank You
Device:Samsung Galaxy Y GT-S5360
Rom:Remix V2.5
Sent from GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
I've follow above procedure till step 10 and stuck on downloading screen, and no sign of progress (blinking text or something)
Upon rechecking, I found out that firmware files are with .rar extension without .md5. what is .md5 means?

works for me everytime..

Can I just say Hotfile's dead so we can't download the firmwares?

Just check the sticky,on android development section.....the firmwares are reuploaded

DC07 said:
Just check the sticky,on android development section.....the firmwares are reuploaded
Click to expand...
Click to collapse
Okay thanks. Going there now.

thanks
but you can do it through stock recovery

galaxy y still off, although it was flashed by odin
hi i have done up to the part where you get a PASS but my phone still is off. what is the problem?
hikachu321 said:
This Guide Will Show you how to Unbrick your Galaxy Y​
Things That You Need:
*A Computer(Windows XP,Windows 7,Windows Vista,Windows 8)
*A USB Cable
*Properly Installed Samsung USB drivers to Connect your phone to Computer Click the Link below to download Samsung USB Drivers
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
*Odin 1.84/Odin1.85 Click The Link Below to Download Odin
http://forum.xda-developers.com/showthread.php?t=1262272
Disclaimer: I'm not responsible for any damage done to your phone.
Instructions
1.Download the firmware of Your Country Click The Link Below
http://forum.xda-developers.com/showpost.php?p=21846620&postcount=1
2.Extract The Two Zip Files You Downloaded Above
3.Open Odin 1.85(Windows 7 Run as Administrator)
(Locate the Firmware files, The Zip files we extracted)
4.Click PDA - PDA_S5360_*****.tar.md5
5.Click Phone - MODEM_S5360_*****..tar.md5
6.Click CSC - CSC_S5360_******.tar.md5
7.Now turn off your Galaxy Y {Remove the battery}
8.Now attach/connect your phone to computer via USB cable.
9.Press and Hold Volume Down button+Home button+Power button for 5 Seconds
10.Now you booted up on Download mode, Press Volume Up button to Continue
11.Wait for a Yellow text to appear
12.Click Start
13.And let ODIN do its work and wait till you see PASS in green color, it means the flashing process is completed successfully
13.You Sucessfully Flashed your phone..!!
14.Insert the battery and Boot up your phone and Enjoy..!!
Comment for Any Problems?? Thank You
Device:Samsung Galaxy Y GT-S5360
Rom:Lenox Evolution v2.2
Kernel:Savie's kernel #54
Sent from GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse

Ahaiziah said:
hi i have done up to the part where you get a PASS but my phone still is off. what is the problem?
Click to expand...
Click to collapse
Simply turn on the phone. If the phone always stuck on boot animation, reboot to stock recovery (Vol UP+Home+Power) and select wipe data/factory reset.
Sent from my GT-S5300 using Tapatalk 0.01a
1. Love doesn't need any reason.
2. Wanna speed up 3G (not 4G LTE)?
Here it is:
http://forum.xda-developers.com/showthread.php?t=2586876

Rebooting in download mode
Hi I have a Samsung Galaxy Y which worked worked good until yesterday night.I was unchecking my alarms for tomorrow and suddenly it shutdown and the galaxy y boot logo came,I thought it was usual as it happened before and device came back to its state after some time but this time it didn't happened like this instead it kept rebooting and rebooting , I tried many ways.I tried going recorvery mode but it rebooted from there as soon as I went there.One time I was lucky enough to have some time to delete cache and wipe the phone but it didn't worked then i tried going in download mode with the odin1.85 but it didn't lety the windows install that driver thing because whenever I went into the download mode it kept restarrting giving windows no time to install the drivers and I am now very frustrated please help me how can I stop this restarting , thanks

dudePUNJABI said:
Hi I have a Samsung Galaxy Y which worked worked good until yesterday night.I was unchecking my alarms for tomorrow and suddenly it shutdown and the galaxy y boot logo came,I thought it was usual as it happened before and device came back to its state after some time but this time it didn't happened like this instead it kept rebooting and rebooting , I tried many ways.I tried going recorvery mode but it rebooted from there as soon as I went there.One time I was lucky enough to have some time to delete cache and wipe the phone but it didn't worked then i tried going in download mode with the odin1.85 but it didn't lety the windows install that driver thing because whenever I went into the download mode it kept restarrting giving windows no time to install the drivers and I am now very frustrated please help me how can I stop this restarting , thanks
Click to expand...
Click to collapse
Try to reboot to download mode with USB Cable attached and pull the battery.

Updated already the Firmware's Link..!!

I passed all the steps successfully but still i am stuck on the boot animation screen.plz help brother.....
---------- Post added at 05:48 PM ---------- Previous post was at 05:32 PM ----------
I have passed all steps successfully....Still it is stuck on boot animation page.......Stock recovery mode not coming up now.....please help me brother.....

devamrit said:
I passed all the steps successfully but still i am stuck on the boot animation screen.plz help brother.....
---------- Post added at 05:48 PM ---------- Previous post was at 05:32 PM ----------
I have passed all steps successfully....Still it is stuck on boot animation page.......Stock recovery mode not coming up now.....please help me brother.....
Click to expand...
Click to collapse
Just Try To Flash Stock Rom Again

devamrit said:
I passed all the steps successfully but still i am stuck on the boot animation screen.plz help brother.....
Click to expand...
Click to collapse
this thread is abit out of date
use odin 3.07
download a wipe firmware pack from my firmware thread at the top of the 5360 dev section
make sure odin is connected - will say com then a number in a coloured box under com:id

My galaxy y is not connecting with odin3 what should I do????

Prayas M4A1 said:
My galaxy y is not connecting with odin3 what should I do????
Click to expand...
Click to collapse
installed samsung usb drivers here
turn phone off (or pull battery and put back in)
put your phone into download mode - hold vol down home button then with them held also hold power button
connect usb cable from phone to pc (use rear usb ports not front ones if you have front usb)
push vol up to start connection (if drivers are installed it should say android adb in device manager)
open odin 3.07 (other versions may work but thats the one I use)
if odin is connected it will say com then a number is a coloured box under com:id on the left hand side
only auto reboot and F.reset time shoud be ticked - DO NOT tick anything else!
put pda in pda
put phone in modem
put csc in csc
start the flashing process
you can get odin flashable firmware from my thread here

(Q) No enter download mode - No enter Revovery mode - No enter Fastboot Mode

my lg g3 d855
no enter download mode and no enter revovery mode
when i press power button nothing do anything
when i want to flash whit flastool tot file ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
probably I deleted
fastboot erase sbl1.img
aboot.img
rpm.img
tz.img
Click to expand...
Click to collapse
now what i do not open my phone

power off.
press and hold volume up button
keep held down while you plug in USB lead from computer to the phone
Sent from my LG-D855 using XDA Premium 4 mobile app

power off.
press and hold volume up button
keep held down while you plug in USB lead from computer to the phone
i did, but not open,

tried pulling the battery first?
Sent from my LG-D855 using XDA Premium 4 mobile app

tried pulling the battery first?
i download d855 kdz file and i used flashtool
i download d855 tot file and dll file and i used flashtool
but not open, not enter download mode, recovery mode and and and
please help me

yenibeyin said:
tried pulling the battery first?
i download d855 kdz file and i used flashtool
i download d855 tot file and dll file and i used flashtool
but not open, not enter download mode, recovery mode and and and
please help me
Click to expand...
Click to collapse
have you tried turning your phone off and then holding vol+ while plug your usb cable into it(downloadmode)

suljo94 said:
have you tried turning your phone off and then holding vol+ while plug your usb cable into it(downloadmode)
Click to expand...
Click to collapse
yes i tried but not open my phone
probably i deleted
fastboot erase sbl1.img
aboot.img
rpm.img
tz.img
Click to expand...
Click to collapse
now what i do not open my phone

yenibeyin said:
yes i tried but not open my phone
probably i deleted
now what i do not open my phone
Click to expand...
Click to collapse
does it start and what can it still do

suljo94 said:
does it start and what can it still do
Click to expand...
Click to collapse
nothing start anything when i want to press power button (volume + and power button)

yenibeyin said:
nothing start anything when i want to press power button (volume + and power button)
Click to expand...
Click to collapse
so your screen stays off whaterever you do if yes then swapp it for an onther one because this one is hardbricked as it can be.

suljo94 said:
so your screen stays off whaterever you do if yes then swapp it for an onther one because this one is hardbricked as it can be.
Click to expand...
Click to collapse
what can i do, now

yenibeyin said:
what can i do, now
Click to expand...
Click to collapse
does your screen stay of whatever you do(buttonwise)

suljo94 said:
does your screen stay of whatever you do(buttonwise)
Click to expand...
Click to collapse
what should i do ?
what is your advise?

yenibeyin said:
what should i do ?
what is your advise?
Click to expand...
Click to collapse
press the powerbutton and tell me what your phone does exacly

suljo94 said:
press the powerbutton and tell me what your phone does exacly
Click to expand...
Click to collapse
now i press the power button (about 10 minute i press) but nothing anything (no led, no screen) (my english not good )

yenibeyin said:
now i press the power button (about 10 minute i press) but nothing anything (no led, no screen) (my english not good )
Click to expand...
Click to collapse
if you remove the battery
put it back
turn on the phone
and nothing shows, not even the screen turn on, then you phone is broken, replace it!

biustech said:
if you remove the battery
put it back
turn on the phone
and nothing shows, not even the screen turn on, then you phone is broken, replace it!
Click to expand...
Click to collapse
thank you my brother for your good advise

yenibeyin said:
thank you my brother for your good advise
Click to expand...
Click to collapse
I'm sorry that I couldn't help

I went to put my phone into download mode today (hold down volume up and connect usb lead) and it failed to enter download mode.
Tried several times pulling the battery before power on and not joy.
Then I changed USB port on my laptop and it goes into download mode every time as expected!
laptop is an HP zbook 15 running Windows 8.1 and it was the front left USB port that it was failing to enter download mode with. Port is a USB3 charging port. Tried in the back left USB port (usb 2) and it worked.
Something to bear in mind.

dex. said:
I went to put my phone into download mode today (hold down volume up and connect usb lead) and it failed to enter download mode.
Tried several times pulling the battery before power on and not joy.
Then I changed USB port on my laptop and it goes into download mode every time as expected!
laptop is an HP zbook 15 running Windows 8.1 and it was the front left USB port that it was failing to enter download mode with. Port is a USB3 charging port. Tried in the back left USB port (usb 2) and it worked.
Something to bear in mind.
Click to expand...
Click to collapse
I was having the same problem where it would just boot into the charge screen and not into recovery/download..then tried changing the USB port from 3.0 to 2.0 and it worked!

Sprint LG G2 Brick - Not showing in device manager - Download mode working!

Hey guys, my friend recently bought an LG G2 on Sprint, but switched carriers to T-Mobile. He rooted his phone successfully, and tried to install custom recovery but downloaded some app that screwed up his phone (not completely sure what happened... he told me he installed a flashing app that flashed recovery but long story short, his phone is in a boot loop.) I can access download mode, and fastboot. When I connect the phone to the computer, my Windows 8.1 Laptop, nothing pops up. I already installed ADB and Fastboot, and when I put the phone into fastboot mode and plug it into the computer, it is recognized but keeps saying "oops!" connection to USB failed trying again.... fastboot ready! etc. etc. I installed the LG Flash tool but the computer won't recognize my device in device manager! I'm really frustrated why it won't recognize it. It shows nothing except ACER Fastboot Device. I just want it to recognize it in download mode so i can flash it back to stock with the LG Flash tool.
Pls halp.

I had to download lg universal drivers for my laptop to recognize my phone in download mode give that a try

im in the same boat as the op. i have tried to install various drivers. im able to get into download mode but no communication with the comp. i try going to recovery but it is gonna and i see some type of fastboot. unsure where to go from here...

This is exactly what i did
Www.rwilco12.com/forum/showthread.php?tid=96
My phone wasnt recognized by laptop until i was in download mode with flash tool running

not finding the ports under device manager anywhere.

Hi
I also have issue with don't recognized device in device manager. Did you solve this issue?
P.S. I have another G2 with normal running android. This G2 has normaly recognized in device manager. So problem not in cable or usb port's.

kdm212 said:
not finding the ports under device manager anywhere.
Click to expand...
Click to collapse
does the computer make a noise when you plug in the device? Also are you sure your in download mode ? (not just the dots) If you have just the dots, then go info fastboot mode and flash both the boot.img and laf.img then reboot into download mode and see if it works

I just put my g2 in download mode and pluged her up. in device manager it poped up under lge android modem, in the modem section of device manager.
Look there first. Then you will have to change the port to 41 so the flash tool will work
If you have qpst it will Tell you what port
Sent from my LG-LS980 using XDA Free mobile app

jcwxguy said:
does the computer make a noise when you plug in the device? Also are you sure your in download mode ? (not just the dots) If you have just the dots, then go info fastboot mode and flash both the boot.img and laf.img then reboot into download mode and see if it works
Click to expand...
Click to collapse
Have the same problem as the OP.
PC don't make any noise.
Yes sure, have a download mode screen on display.
Can't access to fast boot:
1) When i press Vol Up + plug the cable, have a download mode, but PC show nothing in device manager.
Stuck on this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2) When i press Vol Down + power, have a factory hard reset screen which stuck if i agreed to factory reset.
3) When i press Vol up + Vol down + power, have a Hardware key control mode screen.

DEFNUB said:
I just put my g2 in download mode and pluged her up. in device manager it poped up under lge android modem, in the modem section of device manager.
Look there first. Then you will have to change the port to 41 so the flash tool will work
If you have qpst it will Tell you what port
Sent from my LG-LS980 using XDA Free mobile app
Click to expand...
Click to collapse
OP says that device is not recognized in device manager!

demos98 said:
Have the same problem as the OP.
PC don't make any noise.
Yes sure, have a download mode screen on display.
Can't access to fast boot:
1) When i press Vol Up + plug the cable, have a download mode, but PC show nothing in device manager.
Stuck on this
View attachment 2912813
2) When i press Vol Down + power, have a factory hard reset screen which stuck if i agreed to factory reset.
3) When i press Vol up + Vol down + power, have a Hardware key control mode screen.
Click to expand...
Click to collapse
what i had to do when this happened to me, was swap out the device at sprint (had insurance), without insurance you can swap it for $75ish plus tax or if its still under warranty, go through LG
Could also try this thread :
http://forum.xda-developers.com/showthread.php?t=2582142

Unable to boot into recovery or Download mode on Note10 Plus SM-N975F Exynos

Unable to boot into recovery or Download mode on Samsung Note10 Plus SM-N975F Exynos version. I usually remove/bypass FRP (google account) on devices for customers.
I have a customer's Note10plus devices which is still on pincode lock screen trying to hard reset and remove FRP but can't enter into recovery mode. Tried to enter into download to flash with new firmware but unable to boot into download mode either. Looks like the device is remotely locked via Find my mobile which is preventing to hard reset the device, anyone knows about any new security feature ?
RECOVERY MODE:
1: Begining the process by holding the Volume Down + Power key in order to shut off the phone.
2: As soon as the phone is off, hold the Volume Up and Power button till the Samsung logo appears
3: Let go of held buttons when the SAMSUNG Galaxy logo pops up.
4: At this moment i should be seeing the Recovery mode but no its rebooting and getting error : "[PDP] backup fail: setup-wizard finish"
I'm a pro in rebooting devices into recovery and download mode usually get success in first attempt but sometime have to try 2-3 times as well as timing is the key in pressing and holding the combination of keys so surely not the timing issue on this devices.
Can't even use the ADB method as well coz the device is on lock screen, Can't enable USB debugging or see the pop-up on screen to enable it due to being on lock screen.
.\ADB DEVICES - Not reading or showing the connected Note10plus via the official USB cable.
Any help or information would be very helpful and highly appreciated Thanks.

This don't even make sense. If the customer can log in on the pc and lock the screen and such they can also log in and remove it. This whole shebang seems shady and more than likely you will find no help here. Most of us do not support bypassing of frp especially since you stated the customer obviously has access to the device in some form

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It is with the legitimate owner i guess but when they are entering the pin code its coming up with the error " [PDP] back-up:fail setup-wizard [FINISH]" as per the image attached.
Click to expand...
Click to collapse

I have that PDP toast message also when trying to enter recovery mode etc. No pin or passwords are set on my device.

arshad926 said:
Unable to boot into recovery or Download mode on Samsung Note10 Plus SM-N975F Exynos version. I usually remove/bypass FRP (google account) on devices for customers.
I have a customer's Note10plus devices which is still on pincode lock screen trying to hard reset and remove FRP but can't enter into recovery mode. Tried to enter into download to flash with new firmware but unable to boot into download mode either. Looks like the device is remotely locked via Find my mobile which is preventing to hard reset the device, anyone knows about any new security feature ?
RECOVERY MODE:
1: Begining the process by holding the Volume Down + Power key in order to shut off the phone.
2: As soon as the phone is off, hold the Volume Up and Power button till the Samsung logo appears
3: Let go of held buttons when the SAMSUNG Galaxy logo pops up.
4: At this moment i should be seeing the Recovery mode but no its rebooting and getting error : "[PDP] backup fail: setup-wizard finish"
I'm a pro in rebooting devices into recovery and download mode usually get success in first attempt but sometime have to try 2-3 times as well as timing is the key in pressing and holding the combination of keys so surely not the timing issue on this devices.
Can't even use the ADB method as well coz the device is on lock screen, Can't enable USB debugging or see the pop-up on screen to enable it due to being on lock screen.
.\ADB DEVICES - Not reading or showing the connected Note10plus via the official USB cable.
Any help or information would be very helpful and highly appreciated Thanks.
Click to expand...
Click to collapse
Samsung recently changed the download mode entry process.
1. Power down device
2. Hold volume down/up buttons and keep them pressed
3. Connect phone to a pc using usbc cable

dezborders said:
Samsung recently changed the download mode entry process.
1. Power down device
2. Hold volume down/up buttons and keep them pressed
3. Connect phone to a pc using usbc cable
Click to expand...
Click to collapse
Plug the phone into a pc with USB -c cacble whilst the phone is on and you inside of windows, in other word you need to be logged into windows 10.
Power off the phone (keep cable plugged in and pc on at all times)
Hold Volume Up + Power Button until you get into recovery mode.

plug in the official earphone the original one from the box, then try to enter to the recovery mode

Limeybastard said:
I have that PDP toast message also when trying to enter recovery mode etc. No pin or passwords are set on my device.
Click to expand...
Click to collapse
plug in the official earphone the original one from the box, then try to enter to the recovery mode

godsboy7777 said:
Plug the phone into a pc with USB -c cacble whilst the phone is on and you inside of windows, in other word you need to be logged into windows 10.
Power off the phone (keep cable plugged in and pc on at all times)
Hold Volume Up + Power Button until you get into recovery mode.
Click to expand...
Click to collapse
THX mate worked )

dezborders said:
Samsung recently changed the download mode entry process.
1. Power down device
2. Hold volume down/up buttons and keep them pressed
3. Connect phone to a pc using usbc cable
Click to expand...
Click to collapse
Thanks man... It worked

After the second android 11 update, "recovery mode" can be accessed as follows: turn off the phone, wait 10 sec. , connect it to the laptop with the USB-C cable. After the battery percentage appears, press BIXBY + VOLUME UP + POWER BUTTON. When the logo appears, release VOLUME UP and POWER BUTTON and press VOLUME DOWN without releasing the BIXBY button.

same thing was happending with my s10 plus my google maps and youtbe werent working video will work to 6 seconds and stop workling maps wont show routes when searching. couldnt get into recov mode as didnt know the new procedure this helped so much than you so much man

Silviu001 said:
After the second android 11 update, "recovery mode" can be accessed as follows: turn off the phone, wait 10 sec. , connect it to the laptop with the USB-C cable. After the battery percentage appears, press BIXBY + VOLUME UP + POWER BUTTON. When the logo appears, release VOLUME UP and POWER BUTTON and press VOLUME DOWN without releasing the BIXBY button.
Click to expand...
Click to collapse
Can't be right as Bixby button = Power button...

TheMadScientist said:
This don't even make sense. If the customer can log in on the pc and lock the screen and such they can also log in and remove it. This whole shebang seems shady and more than likely you will find no help here. Most of us do not support bypassing of frp especially since you stated the customer obviously has access to the device in some form
Click to expand...
Click to collapse
Can someone here plese help me. Easter Sunday I get a text gif from my Sister and now I cant do anything with my S9. I read here about plugging S9 into windows machine but that scares me. I'm ready to call it quits with Samsung. This is the second device in a few years that has locked up on me. Could this be a hack or maleware? The new login feature for widows that includes a pin didnt work today either. I can get into windows fine with password. I did go to Google find my device and a map shows Africas west coast. HELP

In s10 plus i can't yet insert in recovery mode...Turn off the device, after the buttons combination Power button+Volume up+Bixby button and inserting usb cable in laptop doesn't insert in recovery mode and when open normally is displayed the error " [PDP] back-up:fail setup-wizard [FINISH]"
Any solution in this problem.......?

Hi, I have a similar problem. My Note 10+ stuck at bootloader page and will not power down. I could not use normal procedures to go to download or recovery mode. I drained off my Note's battery but once I plug the charger back to charge its battery. The bootloader page shows up. Any suggestions that can resolve this problem? I attached a screenshot here. Thanks in advance.

user109 said:
Hi, I have a similar problem. My Note 10+ stuck at bootloader page and will not power down. I could not use normal procedures to go to download or recovery mode. I drained off my Note's battery but once I plug the charger back to charge its battery. The bootloader page shows up. Any suggestions that can resolve this problem? I attached a screenshot here. Thanks in advance.
Click to expand...
Click to collapse
Hey there,
I've got some possibly important questions:
Does the Samsung logo show up on boot?
How did you try to boot into download- or recovery-mode, specifically did you press the power- and volume buttons to boot, just pressed the volume buttons, with/without plugged-in USB cable?
Does ADB/Fastboot/Odin/Heimdall/Smart Switch or anything recognize your device?
Any idea of what had been flashed onto the phone?
Does the battery percentage thingy show up when you plug a charger into the phone?
Have a nice morning/afternoon/evening.
Cheers

user109 said:
Hi, I have a similar problem. My Note 10+ stuck at bootloader page and will not power down. I could not use normal procedures to go to download or recovery mode. I drained off my Note's battery but once I plug the charger back to charge its battery. The bootloader page shows up. Any suggestions that can resolve this problem? I attached a screenshot here. Thanks in advance.
Click to expand...
Click to collapse
Does it boot if you press the power button from that screen.
I believe that screen appears after bootloader has been unlocked....which probably means device is rooted.
You should be able to boot into the system by tapping the power button from that screen.

Nic0_ said:
Hey there,
I've got some possibly important questions:
Does the Samsung logo show up on boot?
How did you try to boot into download- or recovery-mode, specifically did you press the power- and volume buttons to boot, just pressed the volume buttons, with/without plugged-in USB cable?
Does ADB/Fastboot/Odin/Heimdall/Smart Switch or anything recognize your device?
Any idea of what had been flashed onto the phone?
Does the battery percentage thingy show up when you plug a charger into the phone?
Have a morning/afternoon/evening.
Cheers
Click to expand...
Click to collapse
Hi,
I have tried every methods that I could think of. I left it drain the battery three days ago and once I plugged in my phone charger and immediately it show this screen. The only way i can do is press vol dwn + power, it rebooted and came back to this screen again. No metter how many times I "reboot" it still come back this.
The last flash i did was used the odin to flashed the Magisk in "AP" cause I lost my root for some reason. I followed Magisk instruction to create a patching tar from the phone itself. Then re-flashed with odin. My Rom was using "N975FXXU6FUCD". After odin prompted "pass" and I left it to reboot. It usually will show this screen a while after rebooted.( normally it'll take around 45 sec to full boot but not this time.) No boot to Android page after left it about 10 minutes thought it still initialize.
I left it almost half an hour and phone still show the bootloader page. What i did was try to reboot or power off by press power button. I couldn't power off it even i hold the button for about 15 sec. Next move I just tried press vol up + power , vol down + power, insert USB plug while holding the vol up + dwn + power. I tried the combination of buttons and last I left it to drain out power.
I'll try if any other suggestions. I don't think there's a reset button unless open out its case..

user109 said:
Hi,
I have tried every methods that I could think of. I left it drain the battery three days ago and once I plugged in my phone charger and immediately it show this screen. The only way i can do is press vol dwn + power, it rebooted and came back to this screen again. No metter how many times I "reboot" it still come back this.
The last flash i did was used the odin to flashed the Magisk in "AP" cause I lost my root for some reason. I followed Magisk instruction to create a patching tar from the phone itself. Then re-flashed with odin. My Rom was using "N975FXXU6FUCD". After odin prompted "pass" and I left it to reboot. It usually will show this screen a while after rebooted.( normally it'll take around 45 sec to full boot but not this time.) No boot to Android page after left it about 10 minutes thought it still initialize.
I left it almost half an hour and phone still show the bootloader page. What i did was try to reboot or power off by press power button. I couldn't power off it even i hold the button for about 15 sec. Next move I just tried press vol up + power , vol down + power, insert USB plug while holding the vol up + dwn + power. I tried the combination of buttons and last I left it to drain out power.
I'll try if any other suggestions. I don't think there's a reset button unless open out its case..
Click to expand...
Click to collapse
Hey there,
With my N10, the combination for getting into Odin-mode is vol-up + vol-down and having a cable plugged in to a computer. Please try "rebooting" your phone (while having it plugged into your computer) and immediately after the screen goes blank, press vol-up + vol-down (without the power button).
I would recommend first trying to flash the full stock ROM (AP, BL and everything else you get) and if it boots, try modding it again.
Have a nice morning/afternoon/evening.
Cheers

Question Nokia G10 and G20 -- How to enter Recovery Mode?

Nokia G10 and G20 -- How to enter Recovery Mode?
Does anyone know how to enter the recovery mode on these two Nokia's model G10, and G20????
Normally, it should be a combination between Volume+/- and Power Button...
However, none of these work apparently.
It only enters fastboot mode and nothing else.
I had tried using adb command "adb devices", it shown connected.
But when I tried "adb reboot recovery", nothing happened so far.
I also digging down some searches for the whole evening.
There were only fake instructions which did not work at all.
Does anyone have any thought about this?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mvikrant97 said:
View attachment 5444049
Click to expand...
Click to collapse
You can see in the above screenshot that I have successfully entered recovery mode. My device is Nokia G20 TA-1365.

mvikrant97 said:
You can see in the above screenshot that I have successfully entered recovery mode. My device is Nokia G20 TA-1365.
Click to expand...
Click to collapse
At last, Thank you so much for your tutorial Here.
It worked so far...
After reading your tutorial, it seems to me to be an usual and familiar procedure. I was still wondering what step I did wrong.
So I tried once again, the first time still not success. Then I managed to update the drivers, "usb_driver_r13-windows", and "platform-tools_r31.0.3-windows". On my second attempt, it success.
Thank you again, I appreciate your help and time devoting.

mvikrant97 said:
You can see in the above screenshot that I have successfully entered recovery mode. My device is Nokia G20 TA-1365.
Click to expand...
Click to collapse
Hi, I manage to get to the "android logo with exclamation mark No command text right below it." part. But when I continue to the 11th step "Keep holding Power key and press Volume up once and you will enter recovery mode. Release the keys.", nothing happens. I have been trying the Power + Volume Up combination for about 15 minutes, in all varieties, and nothing happened. I also tried other button combinations, and nothing worked. I just can't get from the android logo into the recovery mode. I have definitely hit the combination that should be right at least once in those million tries. Any ideas?

emge2116 said:
Hi, I manage to get to the "android logo with exclamation mark No command text right below it." part. But when I continue to the 11th step "Keep holding Power key and press Volume up once and you will enter recovery mode. Release the keys.", nothing happens. I have been trying the Power + Volume Up combination for about 15 minutes, in all varieties, and nothing happened. I also tried other button combinations, and nothing worked. I just can't get from the android logo into the recovery mode. I have definitely hit the combination that should be right at least once in those million tries. Any ideas?
Click to expand...
Click to collapse
Which device do you use?
Simply hold power button and then press the Volume up key once, that's it.

mvikrant97 said:
Which device do you use?
Simply hold power button and then press the Volume up key once, that's it.
Click to expand...
Click to collapse
Nokia G10. I did exactly what you said at least 100 times, and it did not work.

mvikrant97 said:
Which device do you use?
Simply hold power button and then press the Volume up key once, that's it.
Click to expand...
Click to collapse
Does this work?
VID_20211108_165558
Visit this link to play the video:
files.fm
I tried all different possibilities... push both at once, hold both at once, hold one, push the other, and then switch and try again, different holding periods.... only clicks, holding for one second, more seconds,.... everything! I just can't get into the recovery mode.

emge2116 said:
Nokia G10. I did exactly what you said at least 100 times, and it did not work.
Click to expand...
Click to collapse
Begin from start and once you get the Android logo with exclamation mark with No command text then remove USB cable from your phone and then hold power key and press volume key once.

mvikrant97 said:
Begin from start and once you get the Android logo with exclamation mark with No command text then remove USB cable from your phone and then hold power key and press volume key once.
Click to expand...
Click to collapse
I also tried that multiple times already. So, with cable and without cable inserted. But generally I took some other procedure to get to the Android logo, could that be the problem? But even with that procedure, there were a lot of people that were satisfied with the solution, and it worked for them. I used TFM Tool Pro 2.0.0.

emge2116 said:
I also tried that multiple times already. So, with cable and without cable inserted. But generally I took some other procedure to get to the Android logo, could that be the problem? But even with that procedure, there were a lot of people that were satisfied with the solution, and it worked for them. I used TFM Tool Pro 2.0.0.
Click to expand...
Click to collapse
Even if you use TFM Tool Pro 2.0.0 the tool sends the same command fastboot reboot recovery, so it should not matter. You should get to the recovery mode.

mvikrant97 said:
Even if you use TFM Tool Pro 2.0.0 the tool sends the same command fastboot reboot recovery, so it should not matter. You should get to the recovery mode.
Click to expand...
Click to collapse
Ok, thank you. Well, if you do think of anything else that would be stopping it, or if you have any other idea it would be very appreciated. Thanks again!

emge2116 said:
Ok, thank you. Well, if you do think of anything else that would be stopping it, or if you have any other idea it would be very appreciated. Thanks again!
Click to expand...
Click to collapse
If you use any other device please make a video call so that I can better judge your problem. You can PM me to contact on my Google Duo or any other video chat enabled app.

mvikrant97 said:
If you use any other device please make a video call so that I can better judge your problem. You can PM me to contact on my Google Duo or any other video chat enabled app.
Click to expand...
Click to collapse
Please PM me. I think I may have found solution to your problem.

Hi mvikrant97 was there a solution to this problem that emge2116 was experiencing ? I have the same issue, I can successfully get G10 to recovery mode "no command" screen but then no matter what I try I cannot get the phone into the recovery mode menu. Any help appreciated. thanks

stevesydney2126 said:
Hi mvikrant97 was there a solution to this problem that emge2116 was experiencing ? I have the same issue, I can successfully get G10 to recovery mode "no command" screen but then no matter what I try I cannot get the phone into the recovery mode menu. Any help appreciated. thanks
Click to expand...
Click to collapse
Hello even my Nokia G20 is having same issue after the latest update.

ninetitle said:
Nokia G10 and G20 -- How to enter Recovery Mode?
Does anyone know how to enter the recovery mode on these two Nokia's model G10, and G20????
Normally, it should be a combination between Volume+/- and Power Button...
However, none of these work apparently.
It only enters fastboot mode and nothing else.
I had tried using adb command "adb devices", it shown connected.
But when I tried "adb reboot recovery", nothing happened so far.
I also digging down some searches for the whole evening.
There were only fake instructions which did not work at all.
Does anyone have any thought about this?
Click to expand...
Click to collapse
Hello. Can you check whether you can still access the recovery mode by this method? because now even I'm stuck on No command window after the latest update.

mvikrant97 said:
Hello. Can you check whether you can still access the recovery mode by this method? because now even I'm stuck on No command window after the latest update.
Click to expand...
Click to collapse
Hello, did you manage to solve the problem with entering the menu?

filimonArz said:
Hello, did you manage to solve the problem with entering the menu?
Click to expand...
Click to collapse
No success. Maybe Nokia has changed the way we access the recovery mode in latest update. Hope it comes with a fix in December Security Patch.

hey guys! dont own the phone but a sister does so i was roaming xda for fun and do have an experience with a nokia phone myself heh
see since this phone launched with android 11 so its guaranteed to have userspace fastboot implementation, which is called fastbootd so i do have an idea on forcing ur way into recovery
while ur phone is in the => FASTBOOT MODE...
(not fastbootd)
type this command into ur terminal:
fastboot reboot fastboot
hopefully that command will kick ur phone into fastbootd and then u can just exit out of it and back into recovery