Nokia G10 and G20 -- How to enter Recovery Mode?
Does anyone know how to enter the recovery mode on these two Nokia's model G10, and G20????
Normally, it should be a combination between Volume+/- and Power Button...
However, none of these work apparently.
It only enters fastboot mode and nothing else.
I had tried using adb command "adb devices", it shown connected.
But when I tried "adb reboot recovery", nothing happened so far.
I also digging down some searches for the whole evening.
There were only fake instructions which did not work at all.
Does anyone have any thought about this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mvikrant97 said:
View attachment 5444049
Click to expand...
Click to collapse
You can see in the above screenshot that I have successfully entered recovery mode. My device is Nokia G20 TA-1365.
mvikrant97 said:
You can see in the above screenshot that I have successfully entered recovery mode. My device is Nokia G20 TA-1365.
Click to expand...
Click to collapse
At last, Thank you so much for your tutorial Here.
It worked so far...
After reading your tutorial, it seems to me to be an usual and familiar procedure. I was still wondering what step I did wrong.
So I tried once again, the first time still not success. Then I managed to update the drivers, "usb_driver_r13-windows", and "platform-tools_r31.0.3-windows". On my second attempt, it success.
Thank you again, I appreciate your help and time devoting.
mvikrant97 said:
You can see in the above screenshot that I have successfully entered recovery mode. My device is Nokia G20 TA-1365.
Click to expand...
Click to collapse
Hi, I manage to get to the "android logo with exclamation mark No command text right below it." part. But when I continue to the 11th step "Keep holding Power key and press Volume up once and you will enter recovery mode. Release the keys.", nothing happens. I have been trying the Power + Volume Up combination for about 15 minutes, in all varieties, and nothing happened. I also tried other button combinations, and nothing worked. I just can't get from the android logo into the recovery mode. I have definitely hit the combination that should be right at least once in those million tries. Any ideas?
emge2116 said:
Hi, I manage to get to the "android logo with exclamation mark No command text right below it." part. But when I continue to the 11th step "Keep holding Power key and press Volume up once and you will enter recovery mode. Release the keys.", nothing happens. I have been trying the Power + Volume Up combination for about 15 minutes, in all varieties, and nothing happened. I also tried other button combinations, and nothing worked. I just can't get from the android logo into the recovery mode. I have definitely hit the combination that should be right at least once in those million tries. Any ideas?
Click to expand...
Click to collapse
Which device do you use?
Simply hold power button and then press the Volume up key once, that's it.
mvikrant97 said:
Which device do you use?
Simply hold power button and then press the Volume up key once, that's it.
Click to expand...
Click to collapse
Nokia G10. I did exactly what you said at least 100 times, and it did not work.
mvikrant97 said:
Which device do you use?
Simply hold power button and then press the Volume up key once, that's it.
Click to expand...
Click to collapse
Does this work?
VID_20211108_165558
Visit this link to play the video:
files.fm
I tried all different possibilities... push both at once, hold both at once, hold one, push the other, and then switch and try again, different holding periods.... only clicks, holding for one second, more seconds,.... everything! I just can't get into the recovery mode.
emge2116 said:
Nokia G10. I did exactly what you said at least 100 times, and it did not work.
Click to expand...
Click to collapse
Begin from start and once you get the Android logo with exclamation mark with No command text then remove USB cable from your phone and then hold power key and press volume key once.
mvikrant97 said:
Begin from start and once you get the Android logo with exclamation mark with No command text then remove USB cable from your phone and then hold power key and press volume key once.
Click to expand...
Click to collapse
I also tried that multiple times already. So, with cable and without cable inserted. But generally I took some other procedure to get to the Android logo, could that be the problem? But even with that procedure, there were a lot of people that were satisfied with the solution, and it worked for them. I used TFM Tool Pro 2.0.0.
emge2116 said:
I also tried that multiple times already. So, with cable and without cable inserted. But generally I took some other procedure to get to the Android logo, could that be the problem? But even with that procedure, there were a lot of people that were satisfied with the solution, and it worked for them. I used TFM Tool Pro 2.0.0.
Click to expand...
Click to collapse
Even if you use TFM Tool Pro 2.0.0 the tool sends the same command fastboot reboot recovery, so it should not matter. You should get to the recovery mode.
mvikrant97 said:
Even if you use TFM Tool Pro 2.0.0 the tool sends the same command fastboot reboot recovery, so it should not matter. You should get to the recovery mode.
Click to expand...
Click to collapse
Ok, thank you. Well, if you do think of anything else that would be stopping it, or if you have any other idea it would be very appreciated. Thanks again!
emge2116 said:
Ok, thank you. Well, if you do think of anything else that would be stopping it, or if you have any other idea it would be very appreciated. Thanks again!
Click to expand...
Click to collapse
If you use any other device please make a video call so that I can better judge your problem. You can PM me to contact on my Google Duo or any other video chat enabled app.
mvikrant97 said:
If you use any other device please make a video call so that I can better judge your problem. You can PM me to contact on my Google Duo or any other video chat enabled app.
Click to expand...
Click to collapse
Please PM me. I think I may have found solution to your problem.
Hi mvikrant97 was there a solution to this problem that emge2116 was experiencing ? I have the same issue, I can successfully get G10 to recovery mode "no command" screen but then no matter what I try I cannot get the phone into the recovery mode menu. Any help appreciated. thanks
stevesydney2126 said:
Hi mvikrant97 was there a solution to this problem that emge2116 was experiencing ? I have the same issue, I can successfully get G10 to recovery mode "no command" screen but then no matter what I try I cannot get the phone into the recovery mode menu. Any help appreciated. thanks
Click to expand...
Click to collapse
Hello even my Nokia G20 is having same issue after the latest update.
ninetitle said:
Nokia G10 and G20 -- How to enter Recovery Mode?
Does anyone know how to enter the recovery mode on these two Nokia's model G10, and G20????
Normally, it should be a combination between Volume+/- and Power Button...
However, none of these work apparently.
It only enters fastboot mode and nothing else.
I had tried using adb command "adb devices", it shown connected.
But when I tried "adb reboot recovery", nothing happened so far.
I also digging down some searches for the whole evening.
There were only fake instructions which did not work at all.
Does anyone have any thought about this?
Click to expand...
Click to collapse
Hello. Can you check whether you can still access the recovery mode by this method? because now even I'm stuck on No command window after the latest update.
mvikrant97 said:
Hello. Can you check whether you can still access the recovery mode by this method? because now even I'm stuck on No command window after the latest update.
Click to expand...
Click to collapse
Hello, did you manage to solve the problem with entering the menu?
filimonArz said:
Hello, did you manage to solve the problem with entering the menu?
Click to expand...
Click to collapse
No success. Maybe Nokia has changed the way we access the recovery mode in latest update. Hope it comes with a fix in December Security Patch.
hey guys! dont own the phone but a sister does so i was roaming xda for fun and do have an experience with a nokia phone myself heh
see since this phone launched with android 11 so its guaranteed to have userspace fastboot implementation, which is called fastbootd so i do have an idea on forcing ur way into recovery
while ur phone is in the => FASTBOOT MODE...
(not fastbootd)
type this command into ur terminal:
fastboot reboot fastboot
hopefully that command will kick ur phone into fastbootd and then u can just exit out of it and back into recovery
Related
I was flashing v10j firmware with lgflashtools, but the device stopped at 13% and i was unable to reconnect to the pc.
I'm unable to reboot or to enter in dowload mode, show this message "Secure Booting Error".
What can i do?
Please help me :crying:
Any idea why it stopped at 13%? Battery? PC shutdown? Im just curious and cant answer your q im afraid. :/
lossah said:
Any idea why it stopped at 13%? Battery? PC shutdown? Im just curious and cant answer your q im afraid. :/
Click to expand...
Click to collapse
No idea, i did not touched anythings, just lgflashtools said that was an error...
can you use fastboot??? maybe if you try to boot (not flash) into TWRP or original download/recovery.img you can restore it.
Also have you tried to use PC suite to recover the phone from error??
badtzo said:
can you use fastboot??? maybe if you try to boot (not flash) into TWRP or original download/recovery.img you can restore it.
Also have you tried to use PC suite to recover the phone from error??
Click to expand...
Click to collapse
PC suite does not works, he does not see the telephone.
How to use fastboot?
This is what i saw for few seconds, then black screen and colored leds only...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
paolotheking said:
PC suite does not works, he does not see the telephone.
How to use fastboot?
This is what i saw for few seconds, then black screen and colored leds only...
Click to expand...
Click to collapse
pull out battery, reinseert battery then try pressing and holding vol- and power until you see the lg logo then release and press and hold them again
or
pull out battery, reinseert battery then press and hold vol+ and insert usb cable
try them both
paolotheking said:
PC suite does not works, he does not see the telephone.
How to use fastboot?
This is what i saw for few seconds, then black screen and colored leds only...
Click to expand...
Click to collapse
Boot on Download mode and try again....
suljo94 said:
pull out battery, reinseert battery then try pressing and holding vol- and power until you see the lg logo then release and press and hold them again
or
pull out battery, reinseert battery then press and hold vol+ and insert usb cable
try them both
Click to expand...
Click to collapse
I'm able to enter in the stock recovery, i can only do a factory reset but then i see the black screen whit that annoying message.
In dowload mode the same thing.
paolotheking said:
I'm able to enter in the stock recovery, i can only do a factory reset but then i see the black screen whit that annoying message.
In dowload mode the same thing.
Click to expand...
Click to collapse
could you post a pic of what you see in downloadmode
suljo94 said:
could you post a pic of what you see in downloadmode
Click to expand...
Click to collapse
Is the same
paolotheking said:
Is the same
Click to expand...
Click to collapse
do you have adb on you pc
suljo94 said:
do you have adb on you pc
Click to expand...
Click to collapse
No, how can i do?
Please help me :crying:
paolotheking said:
PC suite does not works, he does not see the telephone.
How to use fastboot?
This is what i saw for few seconds, then black screen and colored leds only...
]
Click to expand...
Click to collapse
for fastboot you need a previous backup for your device then you can try to download this files from this thread.
Then just open cmd.exe connect your phone when is showing that screen (hopefully pc will recognise it) and then write this:
for your original backup
Code:
fastboot boot download.img
or
fastboot boot recovery.img
or if you have D855 or D855P you can use this for TWRP
fastboot boot d855.img
Click to expand...
Click to collapse
then your phone should reboot and go into download/recovery/TWRP and you can try to recover your system,
I don't know if it's gonna work but you can try it.
paolotheking said:
No, how can i do?
Please help me :crying:
Click to expand...
Click to collapse
download and put on your pc
https://www.dropbox.com/sh/9sibn2sa15jrlm8/AAAyTkfv2VSl3d2rayYqqxFga
badtzo said:
for fastboot you need a previous backup for your device then you can try to download this files from this thread.
Then just open cmd.exe connect your phone when is showing that screen (hopefully pc will recognise it) and then write this:
for your original backup
Code:
fastboot boot download.img
or
fastboot boot recovery.img
or if you have D855 or D855P you can use this for TWRP
then your phone should reboot and go into download/recovery/TWRP and you can try to recover your system,
I don't know if it's gonna work but you can try it.
Click to expand...
Click to collapse
in cmd shows waiting for device, bur it not recognize the phone...
suljo94 said:
download and put on your pc
https://www.dropbox.com/sh/9sibn2sa15jrlm8/AAAyTkfv2VSl3d2rayYqqxFga
Click to expand...
Click to collapse
thanks, and now?
paolotheking said:
in cmd shows waiting for device, bur it not recognize the phone...
Click to expand...
Click to collapse
try reinstalling the drivers from here if that doesn't work you have a bricked phone
suljo94 said:
try reinstalling the drivers from here if that doesn't work you have a bricked phone
Click to expand...
Click to collapse
So i can't do nothing to save ii?
paolotheking said:
in cmd shows waiting for device, bur it not recognize the phone...
Click to expand...
Click to collapse
sorry man =/
you can try that metod to get ADB...
But if not works there are service centers to repair phones with boxes like octoplus, jtag, etc. since your phone can turn ON there's a hope to recover it with a box. But you need to search for a service center in your town.
badtzo said:
sorry man =/
you can try that metod to get ADB...
But if not works there are service centers to repair phones with boxes like octoplus, jtag, etc. since your phone can turn ON there's a hope to recover it with a box. But you need to search for a service center in your town.
Click to expand...
Click to collapse
OK thanks anyway :/
Hi guys,
Looks like I have a big problem now on my Mi5s Plus. After flashing a chineese developer ROM 6.12.29 in EDL mode I got permanent MI.COM icon on the screen, so device is bricked, power button only restarts the icon. The worst thing is I cannot enter EDL mode anymore since I cannot switch off the device. I have deep flash cable, but it doesn't help, because the phone has to be turned off before release a button. The bootloader is locked, I have permission to unlock, but it doesn't work, saying account on the device is different to account I logged in.
Does anybody know how can I enter again EDL mode in this situation? How can I proceed to get the device unbricked? Please suggest.
I have tried chinees MiFlash to flash the ROM, but also without result (stops in the beginning).
Many thanks in advance.
USB cable mod, search for "USB cable EDL mode"
zebster said:
USB cable mod, search for "USB cable EDL mode"
Click to expand...
Click to collapse
I could find only the topic with modified fastboot, tried, no effect, restart to the same logo.
Could you please give me a link of the post which you think will help me.
Many thanks!
http://en.miui.com/thread-324300-1-1.html
As simple as that.
You have to join the two wires and then connect it to the usb port on PC.
To flash you have to separate them as a normal cable.
zebster said:
http://en.miui.com/thread-324300-1-1.html
As simple as that.
You have to join the two wires and then connect it to the usb port on PC.
To flash you have to separate them as a normal cable.
Click to expand...
Click to collapse
It doesn't work in my situation, I've been trying already since 4 days, because to use this method and cable the phone has to be switched off, and this is not possible, because it always restarts when I press power button. I tried to switch it off in fastboot mode, leaving it in fastboot mode not connected to anything, then after approx. one minute the screen is fully off, but when I connect deep flash cable with joined wires and release the wires, it is just switching on to the same MI.COM logo and then the battery charging screen...((( The cable was working when device was alive, so contacts are correct (black and green)...
I need either the way how to bypass bootloader locking in fastboot, or another way how to reach EDL mode.
I really thought it is always possible to go into EDL with deep flash cable, but looks like it is not... Maybe I use the wrong moment to release the button. I insert cable into PC and wait 3 seconds, then release the button... Tried many times and different moments. But when device was alive it was working immediately and always...(((
Are there other ideas, guys?
Please help!!!
DR2010 said:
It doesn't work in my situation, I've been trying already since 4 days, because to use this method and cable the phone has to be switched off, and this is not possible, because it always restarts when I press power button. I tried to switch it off in fastboot mode, leaving it in fastboot mode not connected to anything, then after approx. one minute the screen is fully off, but when I connect deep flash cable with joined wires and release the wires, it is just switching on to the same MI.COM logo and then the battery charging screen...((( The cable was working when device was alive, so contacts are correct (black and green)...
I need either the way how to bypass bootloader locking in fastboot, or another way how to reach EDL mode.
I really thought it is always possible to go into EDL with deep flash cable, but looks like it is not... Maybe I use the wrong moment to release the button. I insert cable into PC and wait 3 seconds, then release the button... Tried many times and different moments. But when device was alive it was working immediately and always...(((
Are there other ideas, guys?
Please help!!!
Click to expand...
Click to collapse
No, you don't have to have the phone swithed off.
Connect the cable with the mod and then press the power button until it shutsdown.
When it restarts it will be already on EDL mode.
I had exactly the same problem as you.
---------- Post added at 03:52 PM ---------- Previous post was at 03:48 PM ----------
With the phone as you have do this:
- use the modded usb cable and connect the phone to PC
- press power button until the phone restarts
- disconnect usb from PC
- use normal USB cable to connect phone to PC
Now you should see the "Qualcomm HS -USB QDLoader 9008" device on you PC device manager, EDL mode on the phone with a black screen
zebster said:
No, you don't have to have the phone swithed off.
Connect the cable with the mod and then press the power button until it shutsdown.
When it restarts it will be already on EDL mode.
I had exactly the same problem as you.
---------- Post added at 03:52 PM ---------- Previous post was at 03:48 PM ----------
With the phone as you have do this:
- use the modded usb cable and connect the phone to PC
- press power button until the phone restarts
- disconnect usb from PC
- use normal USB cable to connect phone to PC
Now you should see the "Qualcomm HS -USB QDLoader 9008" device on you PC device manager, EDL mode on the phone with a black screen
Click to expand...
Click to collapse
Unfortunately it doesn't work, as I told above(((
When I press the power button and do not release it, the phone cyclically restarts independently if it is connected to something or not and with mod cable or not...
When did you release a power button?
1. Have you tried to press both power and volume up to enter recovery? If you can, select download to flash with MIflash.
2. Can you enter fastboot mode? I so:
https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
zebster said:
1. Have you tried to press both power and volume up to enter recovery? If you can, select download to flash with MIflash.
2. Can you enter fastboot mode? I so:
https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Click to expand...
Click to collapse
Dear zebster, many thanks for your kind efforts to help me.
Yes, I can enter both - standard recovery and fastboot. In standard recovery there is no any selection possible. MiFlash doesn't see anything in this mode as expected.
There is only animated (connected/disconnected) cable and adb interface available on the phone when I connect in this mode to PC, but chineese Mi PC Suite can see the phone, starts flashing even, but hangs on 5% approximately, saying there was an error, please try again (of course doesn't help).
Also I have tried before modified fastboot utility from the link to enter EDL, only restarts the phone, like I pressed the power button, and I get again lovely MI.COM logo...(((
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if you can see this option you should be able to flash thru miflash
zebster said:
if you can see this option you should be able to flash thru miflash
Click to expand...
Click to collapse
no, I have just standard recovery from official ROM (but God knows from which one now...): on the black background screen the white edges of smartphone are pictured and the USB cable below. When I connect device to PC cable becomes connected, when disconnect - disconnected. That's all. You have different recovery...
You have this:
My advice is to download the original rom and flash it thru fastboot:
http://en.miui.com/download-314.html
zebster said:
You have this:
My advice is to download the original rom and flash it thru fastboot:
http://en.miui.com/download-314.html
Click to expand...
Click to collapse
As far as I know it would work if the bootloader would be unlocked, but it is locked!
And the unlocking software says that account is different (I even have official permission to unlock the bootloader). So, I got stucked in a circle((((
I even tried it yesterday, but MiFlash itself in this case crashes...
DR2010 said:
As far as I know it would work if the bootloader would be unlocked, but it is locked!
And the unlocking software says that account is different (I even have official permission to unlock the bootloader). So, I got stucked in a circle((((
I even tried it yesterday, but MiFlash itself in this case crashes...
Click to expand...
Click to collapse
I've flashed mine with bootloader locked in EDL mode.
If you can use Miflash with bootloader you can flash it even with bootloader locked.
Download the oficial ROM and flash thru MIflash.
To unlock you may need to flash the China Developer ROM.
zebster said:
I've flashed mine with bootloader locked in EDL mode.
If you can use Miflash with bootloader you can flash it even with bootloader locked.
Download the oficial ROM and flash thru MIflash.
To unlock you may need to flash the China Developer ROM.
Click to expand...
Click to collapse
Thanks, but again doesn't work on my device...
As I expected, MiFlash 2016.12.14.1(Release) in fastboot mode says that "Partion flashing is not allowed" and finishes with error...
The same as I do it manually via fastboot command interface...(((
Which version of MiFlash did you use? Where can I download it?
Use miflash 2015.10.28.0
Was the version that worked for me.
You can also try to enter EDL on fastboot using:
fastboot oem edl
zebster said:
Use miflash 2015.10.28.0
Was the version that worked for me.
You can also try to enter EDL on fastboot using:
fastboot oem edl
Click to expand...
Click to collapse
fastboot oem edl needs the bootloader to be unlocked.
do you have a link to download miflash 2015.10.28.0?
thanks!
I had the same problem with my Mi 5s.
This is what I eventually did to solve it (from memory - Google a bit for detailed instructions):
Download the Chinese version of Mi PC Suite (It has more options than the english version)
You can then recover from bootloop, by using it's recovery;
- Start MiPCSuite
- Boot phone to recovery (volume up + power)
- Select "Connect with MiAssistant" (bottom option)
- Phone should be detected, and a popup will show on PC with recovery options.
I believe it could download the latest version for you, or you can select a downloaded .zip file to flash.
It will have to be the same type that was previously installed (during the failed flash). So you can not go from Dev to Stable, or from CN to Global.
Go here for (Mi 5s) roms: http://en.miui.com/download-314.html#456
On the PC it immediately said flash failed, but the phone re-flashed the ROM anyway.
Hope this helps some...
P.S. Used my old phone with Google Translate App to read Chinese (Instant translation with the camera)
P.P.S. Other options won't work, because Xiaomi locked out the EDL in Chinese Developer versions. Even with the Deep Flash cable.
I'm now running Chinese Dev. version, and can not enter EDL anymore. I'll have to wait for bootloader unlock before I can flash again...
P.P.P.S. It seems I was wrong about not being able to switch: just flashed Global ROM 8.0.3.0 (From Chinese Dev. ROM 7.1.20) using the same method.
Again on the PC it said flashing failed (immediately) and stays at 0%, but the phone shows it's updating...
After flashing had to clear/reset data (again from MiPCSuite - Middle option in popup - Red button in 2nd popup), otherwise all apps keep crashing.
Because I'm back to Global ROM now, I can also use my Deep Flash cable again.
Dear Zappo, many thanks for your reply! I still fighting with the problem... already tried to disconnect the battery, not going to EDL as well.
I think only JTAG-flasher will help in my case (cannot get it, because I'm out of "civilisation" for a long time), but you have given to me the last hope))
Could you please make a screenshot where you did see the option "Connect with MiAssistant". Which version of chinese MiPCSuite did you use?
I used version 2.3.0.9091, it hangs on approximately 5% (on the phone) and does not proceed... was waiting for 30 minutes, no progress... I used it in a way to download the latest ROM and then install it.
My dear friend Zappo, I still do not believe, but I had success recovering this brick with chinese MiPCSuite v2.3.0.9091. It just downloaded the latest ROM for the device from internet and was flashing it during 1 hour 10 minutes!!! Before I had no success because I was waiting only half an hour, not more!)) But exactly after half an hour it continues and finalizes successfully!!! Another reason of my success I think could be (but less probable) that I have opened a device some days ago and disconnected the battery in order to try to get in EDL mode without the power (but was also not successful). Also today before I started MiPCSuite I have switched on the device from completely OFF state with Volume+ and Power button... So, I really do not know how the success come, but now I'm really happy!!! Many, many, many thanks for your help and for second breath )))
Hello.
I tried to lock back the bootloader, and after executing
PHP:
fastboot flashing lock
got an error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then I faced a similar problem described in this topic https://forum.xda-developers.com/re...-3-pro-boot-recovery-destroyed-t3938481/page3
When you turn on the phone an error pops up for 20 seconds and then phone reboots and everything goes in a circle.
If you press the power button once, the reboot process stops and the phone turns off.
I tried to enter fastboot mode by pressing the power + volume button -
But I didn't succeed.
Can you tell me what I'm doing wrong ?
You should have return the stock fully before locking.
Try to unlock again and then flash original firmware fully
kkffiirr said:
You should have return the stock fully before locking.
Try to unlock again and then flash original firmware fully
Click to expand...
Click to collapse
Thanks for the answer, but unfortunately due to this error fastboot does not load.
If you can tell me how I can flash the phone I will be very grateful.
I would not like to contact an unofficial service...
I guess you don't have recovery as well...
Well, we need to dig in Chinese forums to find edl option, since I don't see any other way.
kkffiirr said:
I guess you don't have recovery as well...
Well, we need to dig in Chinese forums to find edl option, since I don't see any other way.
Click to expand...
Click to collapse
Before lock, I installed TWRP, but idk if it's still there.
UMF cable will help me ?
Me i too i got same your problem i bricked my realme x2 i still didnt find the solution to flash it again
Maybe contact service center
Try booting with both VolUp and VolDown pressed. The screen should be black, but computer should see 9008 device (Qualcomm Download mode). If it works, search through Internet for Snapdragon 730G programmer and proper boot files.
Another option is devices alike Medusa Box; they seem to have underground connections with manufactors, they may provide a solution too.
EDIT. Thanks to the clarification from @T1MOXA, you can enter EDL mode by holding VolUp and VolDown and plugging the switched off phone to a computer.
first confirm that your device is fully turn off and connect a usb cable to the PC by pressing Vol (-) at the same time and you will be in fastboot mood.
yakovpol said:
Try booting with both VolUp and VolDown pressed. The screen should be black, but computer should see 9008 device (Qualcomm Download mode). If it works, search through Internet for Snapdragon 730G programmer and proper boot files.
Another option is devices alike Medisa Box; they seem to have underground connections with manufactors, they may provide a solution too.
Click to expand...
Click to collapse
I've tried this option before, but it led me to the same error screen.
I turned off the phone with a single press of the power button, then pressed all the buttons at the same time.
razu031 said:
first confirm that your device is fully turn off and connect a usb cable to the PC by pressing Vol (-) at the same time and you will be in fastboot mood.
Click to expand...
Click to collapse
I just got the same error.
When you connect the cable, the phone boots with the same error.
narshi shukla said:
Maybe contact service center
Click to expand...
Click to collapse
Unofficial ?
They too bad in my country.
They can easily make it worse.
I can buy a UMF cable, but whether it will help me I do not know.
What do you think ?
Good news...
My phone is defined on the PC as "Qualcomm HS-USB QDLoader 9008 (COM 5)" by connecting and pressing all the volume keys.
Only I don't know if it gives me anything and what to do next...
T1MOXA said:
Good news...
My phone is defined on the PC as "Qualcomm HS-USB QDLoader 9008 (COM 5)" by connecting and pressing all the volume keys.
Only I don't know if it gives me anything and what to do next...
Click to expand...
Click to collapse
Most phones will be able to flash in this mode using qfil tool,
But first you need to find necessary firmware, idk if stock rom downloaded from official site will work or not, maybe fastboot one will work.
This mode is called emergency download mode (edl).
But pls do a lil research as its a newly launched device and you can easily mess it up.
BTW exact same error(boot recovery destroyed) is common error on realme Phones and it can be fixed by flashing vbmeta.img using fastboot.
See attached image for reference only
The 1kb vbmeta is modified to bypass boot verification.
Idk if such vbmeta is available for x2.
If not then flashing stock vbmeta might work.
T1MOXA said:
Hello.
I tried to lock back the bootloader, and after executing
PHP:
fastboot flashing lock
got an error
Click to expand...
Click to collapse
I have the same problem. On 4pda there is a firmware for MsmDownload Tool and the tool itself, but it requires a username and password. Are there alternative options to restore your phone?
Problem: The current image have been destroyed and can not boot
Dear friends, I'm using Realme X2.
Last day, I try bootloader unlock my device. Bootloader unlocked successfully and twrp also successfully installed.. but after I'll try boot, but the is not boot.
The pop-up message shows "THE CURRENT IMAGE HAVE BEEN DESTROYED AND CAN NOT BOOT".. so please me how to solve this problem .
My mobile model number : RMX1992
please help me
Iamsanthoshravi said:
Dear friends, I'm using Realme X2.
Last day, I try bootloader unlock my device. Bootloader unlocked successfully and twrp also successfully installed.. but after I'll try boot, but the is not boot.
The pop-up message shows "THE CURRENT IMAGE HAVE BEEN DESTROYED AND CAN NOT BOOT".. so please me how to solve this problem .
My mobile model number : RMX1992
please help me
Click to expand...
Click to collapse
Look friend i had the same problem and i fix it u have to download the firmware RMX1991 not ozp file then u have to buy the password of the firmware there are sone website they ask you to install teamviewer because thet gonna flash your phone online ok friend i did as i mentioned and i fixed so there is no other way to fix it i cant put the link of firmwares because last time xda warned me
I got same
Hey bro can you fix your phone?
Today I experience same.
What can I do now?
Good afternoon people,
I'm having problems with my wife's Oneplus 5T phone.
He thinks it has undergone some updating because she said it stopped working out of nowhere.
1 - The cell phone performs the initialization boot and remains only with this light on and the black screen.
View attachment 5053157 View attachment 5053159 View attachment 5053161
2 - I can't access ADB to install TWRP or even enter the root folder to put the ROM and install it directly.
I don't think I had the developer options enabled:
* Enable USB debugging
* OEM Unlocking
3 - I tried to install the ROM of the Oneplus website through ADB Sideload. Completes 100%, but has the same problem does not start and keeps this light on.
OnePlus5TOxygen_43_OTA_054_all_2002242025_81ae0ff9d1c34a3f.zip
Acesse only by ADB Sideload
View attachment 5053165
100% Concluded
View attachment 5053167
Pleas could you help me how can I solve this problem?
Hey there!
I had exactly the same thing with Paranoid Android.
What i did is go to TWRP, save everything in a folder on my PC, and then factory reset the phone.
After doing that, i could install OxygenOS and Paranoid Android (PA requires OxygenOS vendor but who cares, you just want to install OxygenOS) and boot without this annoying LED.
XavNotFound said:
Hey there!
Hi @XavNotFound
I had exactly the same thing with Paranoid Android.
What i did is go to TWRP, save everything in a folder on my PC, and then factory reset the phone.
After doing that, i could install OxygenOS and Paranoid Android (PA requires OxygenOS vendor but who cares, you just want to install OxygenOS) and boot without this annoying LED.
Click to expand...
Click to collapse
I don't have the TWRP installed. And my wife didn't do this:
I don't think I had the developer options enabled:
* Enable USB debugging
* OEM Unlocking
I tried erase the data, wipe everything and don't boot. Continue in this black screen and only one light open.
How can I acess or instal TWRP? Please help!
Could you help me?
marciohanderson said:
I don't have the TWRP installed. And my wife didn't do this:
I don't think I had the developer options enabled:
* Enable USB debugging
* OEM Unlocking
How can I acess or instal TWRP? Please help!
I tried erase the data, wipe everything and don't boot. Continue in this black screen and only one light open.
Click to expand...
Click to collapse
I misread the fact that you don't have the developer options enabled, sorry about that.
You could unlock the bootloader of her phone, but she'll lose her data.
Have you tried some of the unbrick tools ?
Cheers.
XavNotFound said:
I misread the fact that you don't have the developer options enabled, sorry about that.
You could unlock the bootloader of her phone, but she'll lose her data.
Have you tried some of the unbrick tools ?
Cheers.
Click to expand...
Click to collapse
I have already try to erase .... She don't have this problem. She only needs that the cell phone works again.
I don't know how to unlock the bootloader, since she didn't have the developer opions enabled. Could you help me?
I don't have this unbrick tools :crying: .... I try everything that I saw on You Tube.
1 - Hard Reset OnePlus 5T
2 - Use ADB (don't work because i don't have the developer acess, and ADB only give me option ADB SIDELOAD as I post on the pictures).
3 - Only acess fast boot ... but is locked as the photos.
PLEASE HELP ME .... I don't know what to do ! :crying:
marciohanderson said:
I have already try to erase .... She don't have this problem. She only needs that the cell phone works again.
I don't know how to unlock the bootloader, since she didn't have the developer opions enabled. Could you help me?
I don't have this unbrick tools :crying: .... I try everything that I saw on You Tube.
1 - Hard Reset OnePlus 5T
2 - Use ADB (don't work because i don't have the developer acess, and ADB only give me option ADB SIDELOAD as I post on the pictures).
3 - Only acess fast boot ... but is locked as the photos.
PLEASE HELP ME .... I don't know what to do ! :crying:
Click to expand...
Click to collapse
Don't worry, i've seen cases that are much worse than this!
I don't know if you have adb and fastboot drivers on your pc but if you don't, install them here: Adb and fastboot installer
Then, restart your phone in fastboot mode, connect it to your pc, start the command line on the computer and try to do the command "fastboot oem unlock"
If it works, maybe try to install TWRP by downloading it on the official website and doing "fastboot flash recovery [path-to-file]" and then boom, you can install roms on it.
If i doesn't work, you should try the unbrick tools there: Unbrick Tools. There's videos to help you on how to unbrick, and it will install an old update but you can update to Pie or 10 after it's done.
XavNotFound said:
Don't worry, i've seen cases that are much worse than this!
I don't know if you have adb and fastboot drivers on your pc but if you don't, install them here: Adb and fastboot installer
Then, restart your phone in fastboot mode, connect it to your pc, start the command line on the computer and try to do the command "fastboot oem unlock"
If it works, maybe try to install TWRP by downloading it on the official website and doing "fastboot flash recovery [path-to-file]" and then boom, you can install roms on it.
If i doesn't work, you should try the unbrick tools there: Unbrick Tools. There's videos to help you on how to unbrick, and it will install an old update but you can update to Pie or 10 after it's done.
Click to expand...
Click to collapse
I'm so dumb I can't install the Qualcom drivers. I don't know why. As you can see in the photo.
View attachment 5054141
1 - I don't have this options able:
* Enable USB debugging
* OEM Unlocking
2 - I install the ADB and minimal_adb_fastboot_v1.4.3_setup
The cell open in ADB SIDELOAD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 5054147 View attachment 5054149 View attachment 5054151
3 - I'm trying to download the Unbricking Toll .... but if I can't see the Qualcomm drivers installed I can't use.
3 - Could you help me? :crying: I don't know if you can help online on Skype. Please say YES :angel:
I only want the phone work again. Because I don't know what to do now.
I saw a lot of videos tutorias on YT and nothing.
marciohanderson said:
I'm so dumb I can't install the Qualcom drivers. I don't know why. As you can see in the photo.
View attachment 5054141
1 - I don't have this options able:
* Enable USB debugging
* OEM Unlocking
2 - I install the ADB and minimal_adb_fastboot_v1.4.3_setup
The cell open in ADB SIDELOAD
View attachment 5054145 View attachment 5054147 View attachment 5054149 View attachment 5054151
3 - I'm trying to download the Unbricking Toll .... but if I can't see the Qualcomm drivers installed I can't use.
3 - Could you help me? :crying: I don't know if you can help online on Skype. Please say YES :angel:
I only want the phone work again. Because I don't know what to do now.
I saw a lot of videos tutorias on YT and nothing.
Click to expand...
Click to collapse
Don't worry, you're not dumb, you're just new to this
Put your phone in fastboot mode by pressing volume up and the power button at the same time, and while your phone is connected to your pc, launch "fastboot oem unlock " from the command line.
Report here what happens after that.
I'll explain a little bit later what you need to do with Qualcomm drivers as they tend to be annoying.
Also, i don't use Skype, sorry about that.
XavNotFound said:
Don't worry, you're not dumb, you're just new to this
Put your phone in fastboot mode by pressing volume up and the power button at the same time, and while your phone is connected to your pc, launch "fastboot oem unlock " from the command line.
Report here what happens after that.
I'll explain a little bit later what you need to do with Qualcomm drivers as they tend to be annoying.
Also, i don't use Skype, sorry about that.
Click to expand...
Click to collapse
I tried to execute the commands in both ADB and Minimal ADB and was not successful according to the photos.
If I had TWRP installed I would have already solved it.
You can help me through TeamView, Zoom or any other tool ... even a smoke signal ... see the level of my despair :crying: heheh
marciohanderson said:
I tried to execute the commands in both ADB and Minimal ADB and was not successful according to the photos.
View attachment 5054179View attachment 5054181 View attachment 5054183
If I had TWRP installed I would have already solved it.
You can help me through TeamView, Zoom or any other tool ... even a smoke signal ... see the level of my despair :crying: heheh
Click to expand...
Click to collapse
Sorry, can't do. I can send you a homing pigeon if you want to.
Just to be sure, have you restarted your computer with driver verification turned off so you can install qualcomm drivers ? (there's a tutorial on how to do it there: Unbricking tool).
It's the most hardcore thing to do, but it's also the most effective one, so be sure to follow every step carefully.
If that doesn't work, i don't know how to help you further than that and i'll let my fellow xda comrades help you.
XavNotFound said:
Sorry, can't do. I can send you a homing pigeon if you want to.
Just to be sure, have you restarted your computer with driver verification turned off so you can install qualcomm drivers ? (there's a tutorial on how to do it there: Unbricking tool).
It's the most hardcore thing to do, but it's also the most effective one, so be sure to follow every step carefully.
If that doesn't work, i don't know how to help you further than that and i'll let my fellow xda comrades help you.
Click to expand...
Click to collapse
1 - I try to do the process to install the Qualcomm Drivers.
I found this installer QDLoader HS-USB Driver_64bit_Setup
2 - I don't know what happened, the cell phone doesn't turn on now and I can't get into the Bootloader .... pressing Vol + and Power ..... nor FAST Boot ... pressing VOL - and Power.
Have you seen anything like this? What should I do?
marciohanderson said:
1 - I try to do the process to install the Qualcomm Drivers.
I found this installer QDLoader HS-USB Driver_64bit_Setup
2 - I don't know what happened, the cell phone doesn't turn on now and I can't get into the Bootloader .... pressing Vol + and Power ..... nor FAST Boot ... pressing VOL - and Power.
Have you seen anything like this? What should I do?
Click to expand...
Click to collapse
I don't really think that's the good drivers, and that never happened to me.
Try to press power for 10 seconds and your phone will restart, maybe retry the unbrick tool after that. If it doesn't restart, i don't know.
XavNotFound said:
I don't really think that's the good drivers, and that never happened to me.
Try to press power for 10 seconds and your phone will restart, maybe retry the unbrick tool after that. If it doesn't restart, i don't know.
Click to expand...
Click to collapse
I tried everything and now nothing ... before open that two options FAST BOOT and Bootloader.
Tried:
1 - press power for 10 seconds
2 - press power for 10 seconds and VOL +
3 - press power for 10 seconds and VOL -
I'm so sad :crying::crying::crying::crying::crying:
Because is a very good phone and give this headache.
If someone could help .... I'll thank you very much.
Someone could HELP ME?
Hey.
This post is my last faith in this device.
So basically I was about to flash partitions, but when I tried to go into fastbootd to flash the critical stuff, after the "fastboot reboot fastboot" command my phone was completely got bricked. I already tried every type of key combinations, the screen was black the entire time, and the phone won't even vibrates.
The only signal of it's being alive, when I plug it and press pwr + vol up, windows gives the sound of a connected/disconnected device, and the MsM tool shows that too. At this point, i was sure about the MsM tool and didn't panicked, I knew that I can almost always unbrick the phone with that... Hmm... This time it was different, because every time I get an error: "Sahara communication failed", or "Param preload", and I cant even do anything. Currently the phone was completely dead.
If you have any idea how to fix that Please let me know! Thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pmppm said:
Hey.
This post is my last faith in this device.
So basically I was about to flash partitions, but when I tried to go into fastbootd to flash the critical stuff, after the "fastboot reboot fastboot" command my phone was completely got bricked. I already tried every type of key combinations, the screen was black the entire time, and the phone won't even vibrates.
The only signal of it's being alive, when I plug it and press pwr + vol up, windows gives the sound of a connected/disconnected device, and the MsM tool shows that too. At this point, i was sure about the MsM tool and didn't panicked, I knew that I can almost always unbrick the phone with that... Hmm... This time it was different, because every time I get an error: "Sahara communication failed", or "Param preload", and I cant even do anything. Currently the phone was completely dead.
If you have any idea how to fix that Please let me know! Thanks.
View attachment 5788047
Click to expand...
Click to collapse
From the image you posted, it looks like you are using the wrong MSM version. "Device not match image".......
TheGhost1951 said:
From the image you posted, it looks like you are using the wrong MSM version. "Device not match image".......
Click to expand...
Click to collapse
I used this exact version on this phone like 2 days ago, I dont think it is a version problem, but thanks for the help!
And it is pretty interesting.. As far as i know EDL connection only alive for 5-10 sec, but currently MsM tool shows Connected until my phone was plugged in (even after refreshing it)
pmppm said:
I used this exact version on this phone like 2 days ago, I dont think it is a version problem, but thanks for the help!
Click to expand...
Click to collapse
Just like the other posted said. If it says that error, it means that your device ID is different. Did you possibly use the India MSM which would change your device ID and not allow you to use the one you were using before? You can also try unchecking sha265check and check use lite firehose and see if it works that way.
TheSayaMan said:
Just like the other posted said. If it says that error, it means that your device ID is different. Did you possibly use the India MSM which would change your device ID and not allow you to use the one you were using before? You can also try unchecking sha265check and check use lite firehose and see if it works that way.
Click to expand...
Click to collapse
Okay so basically, you're both right. I got the Global version, but with the correct MsM version for that did not worked. The solution was to use the Indian version to unbrick it, then ofc switch back to the global. I took this idea from this post, It's seemed so idiot to do it that way, but I had nothing to lose. Thanks again!
pmppm said:
Okay so basically, you're both right. I got the Global version, but with the correct MsM version for that did not worked. The solution was to use the Indian version to unbrick it, then ofc switch back to the global. I took this idea from this post, It's seemed so idiot to do it that way, but I had nothing to lose. Thanks again!
Click to expand...
Click to collapse
Once you used the Indian MSM, then to go global you have to install the updater tool from Google Play store to choose the version you want and install it that way. I believe.....
TheGhost1951 said:
Once you used the Indian MSM, then to go global you have to install the updater tool from Google Play store to choose the version you want and install it that way. I believe.....
Click to expand...
Click to collapse
I don't believe it's available in play store, have to Google search for it but otherwise your right, once you use the India MSM, your device ID is permanently changed and can no longer use the reg MSM for the device.
TheSayaMan said:
I don't believe it's available in play store, have to Google search for it but otherwise your right, once you use the India MSM, your device ID is permanently changed and can no longer use the reg MSM for the device.
Click to expand...
Click to collapse
Would this not work?
I am not sure how OnePlus implements it, but many devices have a Qualcomm USB mode or "Emergency Download Mode" for performing a low level reflash of basic firmware such as the bootloader. Most often, when a device screen doesn't come on, but it vibrates and a PC shows a connected device, this is the case - the PC has detected the QUSB mode.
Unfortunately, Qualcomm does not make their Qualcomm Product Support Tool available to the public, and most OEMs do not provide the necessary binaries to restore the bootloader. The device cannot be repaired or restored without these tools, unless the mainboard is replaced. Unfortunately in this case, I believe that is your only option.
V0latyle said:
I am not sure how OnePlus implements it, but many devices have a Qualcomm USB mode or "Emergency Download Mode" for performing a low level reflash of basic firmware such as the bootloader. Most often, when a device screen doesn't come on, but it vibrates and a PC shows a connected device, this is the case - the PC has detected the QUSB mode.
Unfortunately, Qualcomm does not make their Qualcomm Product Support Tool available to the public, and most OEMs do not provide the necessary binaries to restore the bootloader. The device cannot be repaired or restored without these tools, unless the mainboard is replaced. Unfortunately in this case, I believe that is your only option.
Click to expand...
Click to collapse
It is called the MSM Download Tool. And it is device specific and ready available.
TheGhost1951 said:
It is called the MSM Download Tool. And it is device specific and ready available.
Click to expand...
Click to collapse
Oh, specifically for the OnePlus. Good to know. I suppose I'm of absolutely no help here
Odin is for flashing Samsung devices. Samsung and now OnePlus are the only two devices I have worked with.
pmppm said:
Hey.
This post is my last faith in this device.
So basically I was about to flash partitions, but when I tried to go into fastbootd to flash the critical stuff, after the "fastboot reboot fastboot" command my phone was completely got bricked. I already tried every type of key combinations, the screen was black the entire time, and the phone won't even vibrates.
The only signal of it's being alive, when I plug it and press pwr + vol up, windows gives the sound of a connected/disconnected device, and the MsM tool shows that too. At this point, i was sure about the MsM tool and didn't panicked, I knew that I can almost always unbrick the phone with that... Hmm... This time it was different, because every time I get an error: "Sahara communication failed", or "Param preload", and I cant even do anything. Currently the phone was completely dead.
If you have any idea how to fix that Please let me know! Thanks.
View attachment 5788047
Click to expand...
Click to collapse
India device or global devices
And tip
Reboot to edl
Power off the phone
And press and hold pressed the voll up and voll down
And putt in the usb cable and hold pressed the voll up and voll down
And try msm tool
V0latyle said:
Oh, specifically for the OnePlus. Good to know. I suppose I'm of absolutely no help here
Click to expand...
Click to collapse
Not only specific to OnePlus but also specific to OOS versions.
Might try to uninstall Qualcomm drivers, make sure PC driver signing is disabled. Reboot PC, then re-install latest Qualcomm drivers, re-boot PC and try again with MSM tool. The windows sound when plugging in before is the sound of a device plugged in but couldn't recognize it and threw it out of device manager. That was the reason for the TWO sounds you heard. Also try holding down on vol + - and pressing power and holding it down to try to boot into fastboot mode. If it does, flash boot boot TWRP.img and then boot into edl from there with phone connected to PC and MSM tool in start mode ready to flash as soon as device is connected.