I was flashing v10j firmware with lgflashtools, but the device stopped at 13% and i was unable to reconnect to the pc.
I'm unable to reboot or to enter in dowload mode, show this message "Secure Booting Error".
What can i do?
Please help me :crying:
Any idea why it stopped at 13%? Battery? PC shutdown? Im just curious and cant answer your q im afraid. :/
lossah said:
Any idea why it stopped at 13%? Battery? PC shutdown? Im just curious and cant answer your q im afraid. :/
Click to expand...
Click to collapse
No idea, i did not touched anythings, just lgflashtools said that was an error...
can you use fastboot??? maybe if you try to boot (not flash) into TWRP or original download/recovery.img you can restore it.
Also have you tried to use PC suite to recover the phone from error??
badtzo said:
can you use fastboot??? maybe if you try to boot (not flash) into TWRP or original download/recovery.img you can restore it.
Also have you tried to use PC suite to recover the phone from error??
Click to expand...
Click to collapse
PC suite does not works, he does not see the telephone.
How to use fastboot?
This is what i saw for few seconds, then black screen and colored leds only...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
paolotheking said:
PC suite does not works, he does not see the telephone.
How to use fastboot?
This is what i saw for few seconds, then black screen and colored leds only...
Click to expand...
Click to collapse
pull out battery, reinseert battery then try pressing and holding vol- and power until you see the lg logo then release and press and hold them again
or
pull out battery, reinseert battery then press and hold vol+ and insert usb cable
try them both
paolotheking said:
PC suite does not works, he does not see the telephone.
How to use fastboot?
This is what i saw for few seconds, then black screen and colored leds only...
Click to expand...
Click to collapse
Boot on Download mode and try again....
suljo94 said:
pull out battery, reinseert battery then try pressing and holding vol- and power until you see the lg logo then release and press and hold them again
or
pull out battery, reinseert battery then press and hold vol+ and insert usb cable
try them both
Click to expand...
Click to collapse
I'm able to enter in the stock recovery, i can only do a factory reset but then i see the black screen whit that annoying message.
In dowload mode the same thing.
paolotheking said:
I'm able to enter in the stock recovery, i can only do a factory reset but then i see the black screen whit that annoying message.
In dowload mode the same thing.
Click to expand...
Click to collapse
could you post a pic of what you see in downloadmode
suljo94 said:
could you post a pic of what you see in downloadmode
Click to expand...
Click to collapse
Is the same
paolotheking said:
Is the same
Click to expand...
Click to collapse
do you have adb on you pc
suljo94 said:
do you have adb on you pc
Click to expand...
Click to collapse
No, how can i do?
Please help me :crying:
paolotheking said:
PC suite does not works, he does not see the telephone.
How to use fastboot?
This is what i saw for few seconds, then black screen and colored leds only...
]
Click to expand...
Click to collapse
for fastboot you need a previous backup for your device then you can try to download this files from this thread.
Then just open cmd.exe connect your phone when is showing that screen (hopefully pc will recognise it) and then write this:
for your original backup
Code:
fastboot boot download.img
or
fastboot boot recovery.img
or if you have D855 or D855P you can use this for TWRP
fastboot boot d855.img
Click to expand...
Click to collapse
then your phone should reboot and go into download/recovery/TWRP and you can try to recover your system,
I don't know if it's gonna work but you can try it.
paolotheking said:
No, how can i do?
Please help me :crying:
Click to expand...
Click to collapse
download and put on your pc
https://www.dropbox.com/sh/9sibn2sa15jrlm8/AAAyTkfv2VSl3d2rayYqqxFga
badtzo said:
for fastboot you need a previous backup for your device then you can try to download this files from this thread.
Then just open cmd.exe connect your phone when is showing that screen (hopefully pc will recognise it) and then write this:
for your original backup
Code:
fastboot boot download.img
or
fastboot boot recovery.img
or if you have D855 or D855P you can use this for TWRP
then your phone should reboot and go into download/recovery/TWRP and you can try to recover your system,
I don't know if it's gonna work but you can try it.
Click to expand...
Click to collapse
in cmd shows waiting for device, bur it not recognize the phone...
suljo94 said:
download and put on your pc
https://www.dropbox.com/sh/9sibn2sa15jrlm8/AAAyTkfv2VSl3d2rayYqqxFga
Click to expand...
Click to collapse
thanks, and now?
paolotheking said:
in cmd shows waiting for device, bur it not recognize the phone...
Click to expand...
Click to collapse
try reinstalling the drivers from here if that doesn't work you have a bricked phone
suljo94 said:
try reinstalling the drivers from here if that doesn't work you have a bricked phone
Click to expand...
Click to collapse
So i can't do nothing to save ii?
paolotheking said:
in cmd shows waiting for device, bur it not recognize the phone...
Click to expand...
Click to collapse
sorry man =/
you can try that metod to get ADB...
But if not works there are service centers to repair phones with boxes like octoplus, jtag, etc. since your phone can turn ON there's a hope to recover it with a box. But you need to search for a service center in your town.
badtzo said:
sorry man =/
you can try that metod to get ADB...
But if not works there are service centers to repair phones with boxes like octoplus, jtag, etc. since your phone can turn ON there's a hope to recover it with a box. But you need to search for a service center in your town.
Click to expand...
Click to collapse
OK thanks anyway :/
Related
CWM for Micromax A44 Punk
:highfive:
Hello Guys!! I am back with the recovery for Micromax A44 Punk....
First of all i would like to thank Dsixda for his Kitchen tool... and yuweng for making plugin for MT6573 Device... :good::highfive:
Finally we have the CWM6 for Micromax A44...
Please download the attachments from this post...
1. Scatter File
2. Recovery.img (CWM)
HOW TO FLASH USING SP FLASH TOOL:
Get the spflash tool from attachment, scatter file and the recovery file.... put scatter and recovery.img in same folder...
now start spflash tool.....load scatter file.... and browse the scatter file that i have provided.... now also browse the recovery.img file... switch off your phone.... remove battery ...put the battery back, do not turn on the phone do not press any button... now press download button on spflash tool .. a message will appear on the right bottom corner .."Connect you phone within xx Secs..." now connect your phone and wait for the yellow progress bar to complete as soon as it completes a green circle will appear... close spflash tool and restart your phone.. enter into your new cwm recovery.....
Press Power + Vol up to enter the recovery....
Please Post your problems or feedback.. and let me know....
Thanks Guys!
Note: do it at your own risk....
Video:
https://www.youtube.com/watch?v=M_iWGPxqWXo
ScreenShots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Youtube Video coming soon!!!
Thanx
Lots of thanx..........
thanx ......
ERROR!!!!!!!!
i am getting this everytime.....
I have flashed ......
Gogeta said:
i am getting this everytime.....
Click to expand...
Click to collapse
...
I have flashed ...
successfully....
any rom for mmx a44 (custom roms)
??????
?????
?????
He friend I am getting error....
Scatter file not loding please help me....
Sent from my A44 using xda app-developers app
sagar8070 said:
He friend I am getting error....
Scatter file not loding please help me....
Sent from my A44 using xda app-developers app
Click to expand...
Click to collapse
Install this on PC
http://m.download.cnet.com/Microsoft-Core-XML-Services-MSXML-6-0/3000-7241_4-10725999.html
I solved previous problem but now when I click 'download' it gets stuck on 'searching' & my device is not getting recognized......
Sent from my X8
Thanks bro...
Sent from my A44 using xda app-developers app
sagar8070 said:
Thanks bro...
Sent from my A44 using xda app-developers app
Click to expand...
Click to collapse
Press it
Any solution for me??
Sent from my X8
Install ADB driver on your pc
Sent from my A44 using xda app-developers app
Gogeta said:
i am getting this everytime.....
Click to expand...
Click to collapse
You need to load scatter file.. use the one that i have provided...
and you need appropriate drivers for your device.... it should automatically install the driver....
also you can visit http://andro-central.blogspot.in thats my website where i usually post my modification on A44 Rom...
bindasboy said:
You need to load scatter file.. use the one that i have provided...
and you need appropriate drivers for your device.... it should automatically install the driver....
also you can visit http://andro-central.blogspot.in thats my website where i usually post my modification on A44 Rom...
Click to expand...
Click to collapse
Well its not being recognized by sp flashtool now when I connect it...
Its stuck on 'searching' & the phone starts to charge after sometime with USB cable..
Which drivers to install & how?
Thanks
Sent from my X8
Seems your device driver isnt installed on your pc... Search googleon how to install adb drivers...
Sp flash tool error (8100)
Get the spflash tool from attachment, scatter file and the recovery file.... put scatter and recovery.img in same folder...
now start spflash tool.....load scatter file.... and browse the scatter file that i have provided.... now also browse the recovery.img file... switch off your phone.... remove battery ...put the battery back, do not turn on the phone do not press any button... now press download button on spflash tool .. a message will appear on the right bottom corner .."Connect you phone within xx Secs..."
Click to expand...
Click to collapse
I have tried up to this and after that when i connect my device with USB cable i got this error dialog. (see attachment). even i had install the drivers for ADB but still i can not connect my device. Please advice me.
season.ankit said:
I have tried up to this and after that when i connect my device with USB cable i got this error dialog. (see attachment). even i had install the drivers for ADB but still i can not connect my device. Please advice me.
Click to expand...
Click to collapse
WELL YOU HAVE TO DISSCONNECT THE PHONE FROM USB CABLE, THEN SWITCH OFF THE PHONE REMOVE THE BATTERY PUT IT BACK DONT TURN IT ON YET... KEEP THE PHONE ASIDE FOR A WHILE..
NOW ON SP FLASH TOOL LOAD SCATTER FILE AND THEN LOAD THE RECOVERY NOW MAKE SURE ONLY RECOVERY IS TICKED REST IS UNTICKED.. AFTER THAT CLICK ON DOWNLOAD ......
AS SOON AS YOU PRESS THE DOWNLOAD BUTTON ON SPFLASH TOOL. YOU WILL SEE THAT A MESSAGE WILL APPEAR ON THE RIGHT BOTTOM CORNER OF SP FLASH TOOL TO "CONNECT PHONE IN XX SECS", NOW CONNECT YOUR PHONE TO THE CABLE...
BE PATIENT IT MAY TAKE A WHILE. AND FINALLY IT WILL BE DONE....
HAVE FUN... MAKE SURE ALL THE PROCESS IS FOLLOWED AS TOLD IN THIS POST YOUR ARE EITHER KEEPING THE PHONE CONNECTED OR NOT TURNING IT OFF... THATS WHY YOU ARE FACING THIS ERROR..
AND THE PORT WILL AUTOMATICALLY BE SELECTED AS YOU CONNECT THE PHONE.... SO SIMPLY DO AS I SAY.... :fingers-crossed:
bindasboy said:
WELL YOU HAVE TO DISSCONNECT THE PHONE FROM USB CABLE, THEN SWITCH OFF THE PHONE REMOVE THE BATTERY PUT IT BACK DONT TURN IT ON YET... KEEP THE PHONE ASIDE FOR A WHILE..
NOW ON SP FLASH TOOL LOAD SCATTER FILE AND THEN LOAD THE RECOVERY NOW MAKE SURE ONLY RECOVERY IS TICKED REST IS UNTICKED.. AFTER THAT CLICK ON DOWNLOAD ......
AS SOON AS YOU PRESS THE DOWNLOAD BUTTON ON SPFLASH TOOL. YOU WILL SEE THAT A MESSAGE WILL APPEAR ON THE RIGHT BOTTOM CORNER OF SP FLASH TOOL TO "CONNECT PHONE IN XX SECS", NOW CONNECT YOUR PHONE TO THE CABLE...
BE PATIENT IT MAY TAKE A WHILE. AND FINALLY IT WILL BE DONE....
HAVE FUN... MAKE SURE ALL THE PROCESS IS FOLLOWED AS TOLD IN THIS POST YOUR ARE EITHER KEEPING THE PHONE CONNECTED OR NOT TURNING IT OFF... THATS WHY YOU ARE FACING THIS ERROR..
AND THE PORT WILL AUTOMATICALLY BE SELECTED AS YOU CONNECT THE PHONE.... SO SIMPLY DO AS I SAY.... :fingers-crossed:
Click to expand...
Click to collapse
I followed all the step as you mention.
i switched off my device, remove battery for some time.
Put it back in device.
not pressing any button so the device is switched off.
then running spFlash tool. select scatter file, recovery was selected.
Than pressed download button after that connect device via USB cable.
Can you please let me know if the device is switched off than how it can detect USB drive?
When my phone is on than i can see my connected device in eclipse DDMS, but when it is switched off at that time it is not connected to the PC. is that cause for this error?
season.ankit said:
i followed all the step as you mention.
I switched off my device, remove battery for some time.
Put it back in device.
Not pressing any button so the device is switched off.
Then running spflash tool. Select scatter file, recovery was selected.
Than pressed download button after that connect device via usb cable.
Can you please let me know if the device is switched off than how it can detect usb drive?
When my phone is on than i can see my connected device in eclipse ddms, but when it is switched off at that time it is not connected to the pc. Is that cause for this error?
Click to expand...
Click to collapse
sp flash tool will work when your phone is switched off... You need to do as i say else it wont work.... Follow the steps above... Ok....
And yes it will be detected on sp flash tool when switched off...
Recovery?
bindasboy said:
CWM for Micromax A44 Punk
Press Power + Vol up to enter the recovery....
Please Post your problems or feedback.. and let me know....
Thanks Guys!
Note: do it at your own risk....
Click to expand...
Click to collapse
I'm not able to enter into recovery... What to do? I switched off the mobile, then pressed Power+Vol up simultaneously... But no response. Then I switched on and at once pressed Power+Vol up, but the phone started normally. Then, switched on and pressed Vol Up - normal boot. Finally, switched on and tapiped Vol up continuously, same - normal boot...
Please tell me how to enter into recovery...
my lg g3 d855
no enter download mode and no enter revovery mode
when i press power button nothing do anything
when i want to flash whit flastool tot file ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
probably I deleted
fastboot erase sbl1.img
aboot.img
rpm.img
tz.img
Click to expand...
Click to collapse
now what i do not open my phone
power off.
press and hold volume up button
keep held down while you plug in USB lead from computer to the phone
Sent from my LG-D855 using XDA Premium 4 mobile app
power off.
press and hold volume up button
keep held down while you plug in USB lead from computer to the phone
i did, but not open,
tried pulling the battery first?
Sent from my LG-D855 using XDA Premium 4 mobile app
tried pulling the battery first?
i download d855 kdz file and i used flashtool
i download d855 tot file and dll file and i used flashtool
but not open, not enter download mode, recovery mode and and and
please help me
yenibeyin said:
tried pulling the battery first?
i download d855 kdz file and i used flashtool
i download d855 tot file and dll file and i used flashtool
but not open, not enter download mode, recovery mode and and and
please help me
Click to expand...
Click to collapse
have you tried turning your phone off and then holding vol+ while plug your usb cable into it(downloadmode)
suljo94 said:
have you tried turning your phone off and then holding vol+ while plug your usb cable into it(downloadmode)
Click to expand...
Click to collapse
yes i tried but not open my phone
probably i deleted
fastboot erase sbl1.img
aboot.img
rpm.img
tz.img
Click to expand...
Click to collapse
now what i do not open my phone
yenibeyin said:
yes i tried but not open my phone
probably i deleted
now what i do not open my phone
Click to expand...
Click to collapse
does it start and what can it still do
suljo94 said:
does it start and what can it still do
Click to expand...
Click to collapse
nothing start anything when i want to press power button (volume + and power button)
yenibeyin said:
nothing start anything when i want to press power button (volume + and power button)
Click to expand...
Click to collapse
so your screen stays off whaterever you do if yes then swapp it for an onther one because this one is hardbricked as it can be.
suljo94 said:
so your screen stays off whaterever you do if yes then swapp it for an onther one because this one is hardbricked as it can be.
Click to expand...
Click to collapse
what can i do, now
yenibeyin said:
what can i do, now
Click to expand...
Click to collapse
does your screen stay of whatever you do(buttonwise)
suljo94 said:
does your screen stay of whatever you do(buttonwise)
Click to expand...
Click to collapse
what should i do ?
what is your advise?
yenibeyin said:
what should i do ?
what is your advise?
Click to expand...
Click to collapse
press the powerbutton and tell me what your phone does exacly
suljo94 said:
press the powerbutton and tell me what your phone does exacly
Click to expand...
Click to collapse
now i press the power button (about 10 minute i press) but nothing anything (no led, no screen) (my english not good )
yenibeyin said:
now i press the power button (about 10 minute i press) but nothing anything (no led, no screen) (my english not good )
Click to expand...
Click to collapse
if you remove the battery
put it back
turn on the phone
and nothing shows, not even the screen turn on, then you phone is broken, replace it!
biustech said:
if you remove the battery
put it back
turn on the phone
and nothing shows, not even the screen turn on, then you phone is broken, replace it!
Click to expand...
Click to collapse
thank you my brother for your good advise
yenibeyin said:
thank you my brother for your good advise
Click to expand...
Click to collapse
I'm sorry that I couldn't help
I went to put my phone into download mode today (hold down volume up and connect usb lead) and it failed to enter download mode.
Tried several times pulling the battery before power on and not joy.
Then I changed USB port on my laptop and it goes into download mode every time as expected!
laptop is an HP zbook 15 running Windows 8.1 and it was the front left USB port that it was failing to enter download mode with. Port is a USB3 charging port. Tried in the back left USB port (usb 2) and it worked.
Something to bear in mind.
dex. said:
I went to put my phone into download mode today (hold down volume up and connect usb lead) and it failed to enter download mode.
Tried several times pulling the battery before power on and not joy.
Then I changed USB port on my laptop and it goes into download mode every time as expected!
laptop is an HP zbook 15 running Windows 8.1 and it was the front left USB port that it was failing to enter download mode with. Port is a USB3 charging port. Tried in the back left USB port (usb 2) and it worked.
Something to bear in mind.
Click to expand...
Click to collapse
I was having the same problem where it would just boot into the charge screen and not into recovery/download..then tried changing the USB port from 3.0 to 2.0 and it worked!
Hello.
I tried to lock back the bootloader, and after executing
PHP:
fastboot flashing lock
got an error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then I faced a similar problem described in this topic https://forum.xda-developers.com/re...-3-pro-boot-recovery-destroyed-t3938481/page3
When you turn on the phone an error pops up for 20 seconds and then phone reboots and everything goes in a circle.
If you press the power button once, the reboot process stops and the phone turns off.
I tried to enter fastboot mode by pressing the power + volume button -
But I didn't succeed.
Can you tell me what I'm doing wrong ?
You should have return the stock fully before locking.
Try to unlock again and then flash original firmware fully
kkffiirr said:
You should have return the stock fully before locking.
Try to unlock again and then flash original firmware fully
Click to expand...
Click to collapse
Thanks for the answer, but unfortunately due to this error fastboot does not load.
If you can tell me how I can flash the phone I will be very grateful.
I would not like to contact an unofficial service...
I guess you don't have recovery as well...
Well, we need to dig in Chinese forums to find edl option, since I don't see any other way.
kkffiirr said:
I guess you don't have recovery as well...
Well, we need to dig in Chinese forums to find edl option, since I don't see any other way.
Click to expand...
Click to collapse
Before lock, I installed TWRP, but idk if it's still there.
UMF cable will help me ?
Me i too i got same your problem i bricked my realme x2 i still didnt find the solution to flash it again
Maybe contact service center
Try booting with both VolUp and VolDown pressed. The screen should be black, but computer should see 9008 device (Qualcomm Download mode). If it works, search through Internet for Snapdragon 730G programmer and proper boot files.
Another option is devices alike Medusa Box; they seem to have underground connections with manufactors, they may provide a solution too.
EDIT. Thanks to the clarification from @T1MOXA, you can enter EDL mode by holding VolUp and VolDown and plugging the switched off phone to a computer.
first confirm that your device is fully turn off and connect a usb cable to the PC by pressing Vol (-) at the same time and you will be in fastboot mood.
yakovpol said:
Try booting with both VolUp and VolDown pressed. The screen should be black, but computer should see 9008 device (Qualcomm Download mode). If it works, search through Internet for Snapdragon 730G programmer and proper boot files.
Another option is devices alike Medisa Box; they seem to have underground connections with manufactors, they may provide a solution too.
Click to expand...
Click to collapse
I've tried this option before, but it led me to the same error screen.
I turned off the phone with a single press of the power button, then pressed all the buttons at the same time.
razu031 said:
first confirm that your device is fully turn off and connect a usb cable to the PC by pressing Vol (-) at the same time and you will be in fastboot mood.
Click to expand...
Click to collapse
I just got the same error.
When you connect the cable, the phone boots with the same error.
narshi shukla said:
Maybe contact service center
Click to expand...
Click to collapse
Unofficial ?
They too bad in my country.
They can easily make it worse.
I can buy a UMF cable, but whether it will help me I do not know.
What do you think ?
Good news...
My phone is defined on the PC as "Qualcomm HS-USB QDLoader 9008 (COM 5)" by connecting and pressing all the volume keys.
Only I don't know if it gives me anything and what to do next...
T1MOXA said:
Good news...
My phone is defined on the PC as "Qualcomm HS-USB QDLoader 9008 (COM 5)" by connecting and pressing all the volume keys.
Only I don't know if it gives me anything and what to do next...
Click to expand...
Click to collapse
Most phones will be able to flash in this mode using qfil tool,
But first you need to find necessary firmware, idk if stock rom downloaded from official site will work or not, maybe fastboot one will work.
This mode is called emergency download mode (edl).
But pls do a lil research as its a newly launched device and you can easily mess it up.
BTW exact same error(boot recovery destroyed) is common error on realme Phones and it can be fixed by flashing vbmeta.img using fastboot.
See attached image for reference only
The 1kb vbmeta is modified to bypass boot verification.
Idk if such vbmeta is available for x2.
If not then flashing stock vbmeta might work.
T1MOXA said:
Hello.
I tried to lock back the bootloader, and after executing
PHP:
fastboot flashing lock
got an error
Click to expand...
Click to collapse
I have the same problem. On 4pda there is a firmware for MsmDownload Tool and the tool itself, but it requires a username and password. Are there alternative options to restore your phone?
Problem: The current image have been destroyed and can not boot
Dear friends, I'm using Realme X2.
Last day, I try bootloader unlock my device. Bootloader unlocked successfully and twrp also successfully installed.. but after I'll try boot, but the is not boot.
The pop-up message shows "THE CURRENT IMAGE HAVE BEEN DESTROYED AND CAN NOT BOOT".. so please me how to solve this problem .
My mobile model number : RMX1992
please help me
Iamsanthoshravi said:
Dear friends, I'm using Realme X2.
Last day, I try bootloader unlock my device. Bootloader unlocked successfully and twrp also successfully installed.. but after I'll try boot, but the is not boot.
The pop-up message shows "THE CURRENT IMAGE HAVE BEEN DESTROYED AND CAN NOT BOOT".. so please me how to solve this problem .
My mobile model number : RMX1992
please help me
Click to expand...
Click to collapse
Look friend i had the same problem and i fix it u have to download the firmware RMX1991 not ozp file then u have to buy the password of the firmware there are sone website they ask you to install teamviewer because thet gonna flash your phone online ok friend i did as i mentioned and i fixed so there is no other way to fix it i cant put the link of firmwares because last time xda warned me
I got same
Hey bro can you fix your phone?
Today I experience same.
What can I do now?
Nokia G10 and G20 -- How to enter Recovery Mode?
Does anyone know how to enter the recovery mode on these two Nokia's model G10, and G20????
Normally, it should be a combination between Volume+/- and Power Button...
However, none of these work apparently.
It only enters fastboot mode and nothing else.
I had tried using adb command "adb devices", it shown connected.
But when I tried "adb reboot recovery", nothing happened so far.
I also digging down some searches for the whole evening.
There were only fake instructions which did not work at all.
Does anyone have any thought about this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mvikrant97 said:
View attachment 5444049
Click to expand...
Click to collapse
You can see in the above screenshot that I have successfully entered recovery mode. My device is Nokia G20 TA-1365.
mvikrant97 said:
You can see in the above screenshot that I have successfully entered recovery mode. My device is Nokia G20 TA-1365.
Click to expand...
Click to collapse
At last, Thank you so much for your tutorial Here.
It worked so far...
After reading your tutorial, it seems to me to be an usual and familiar procedure. I was still wondering what step I did wrong.
So I tried once again, the first time still not success. Then I managed to update the drivers, "usb_driver_r13-windows", and "platform-tools_r31.0.3-windows". On my second attempt, it success.
Thank you again, I appreciate your help and time devoting.
mvikrant97 said:
You can see in the above screenshot that I have successfully entered recovery mode. My device is Nokia G20 TA-1365.
Click to expand...
Click to collapse
Hi, I manage to get to the "android logo with exclamation mark No command text right below it." part. But when I continue to the 11th step "Keep holding Power key and press Volume up once and you will enter recovery mode. Release the keys.", nothing happens. I have been trying the Power + Volume Up combination for about 15 minutes, in all varieties, and nothing happened. I also tried other button combinations, and nothing worked. I just can't get from the android logo into the recovery mode. I have definitely hit the combination that should be right at least once in those million tries. Any ideas?
emge2116 said:
Hi, I manage to get to the "android logo with exclamation mark No command text right below it." part. But when I continue to the 11th step "Keep holding Power key and press Volume up once and you will enter recovery mode. Release the keys.", nothing happens. I have been trying the Power + Volume Up combination for about 15 minutes, in all varieties, and nothing happened. I also tried other button combinations, and nothing worked. I just can't get from the android logo into the recovery mode. I have definitely hit the combination that should be right at least once in those million tries. Any ideas?
Click to expand...
Click to collapse
Which device do you use?
Simply hold power button and then press the Volume up key once, that's it.
mvikrant97 said:
Which device do you use?
Simply hold power button and then press the Volume up key once, that's it.
Click to expand...
Click to collapse
Nokia G10. I did exactly what you said at least 100 times, and it did not work.
mvikrant97 said:
Which device do you use?
Simply hold power button and then press the Volume up key once, that's it.
Click to expand...
Click to collapse
Does this work?
VID_20211108_165558
Visit this link to play the video:
files.fm
I tried all different possibilities... push both at once, hold both at once, hold one, push the other, and then switch and try again, different holding periods.... only clicks, holding for one second, more seconds,.... everything! I just can't get into the recovery mode.
emge2116 said:
Nokia G10. I did exactly what you said at least 100 times, and it did not work.
Click to expand...
Click to collapse
Begin from start and once you get the Android logo with exclamation mark with No command text then remove USB cable from your phone and then hold power key and press volume key once.
mvikrant97 said:
Begin from start and once you get the Android logo with exclamation mark with No command text then remove USB cable from your phone and then hold power key and press volume key once.
Click to expand...
Click to collapse
I also tried that multiple times already. So, with cable and without cable inserted. But generally I took some other procedure to get to the Android logo, could that be the problem? But even with that procedure, there were a lot of people that were satisfied with the solution, and it worked for them. I used TFM Tool Pro 2.0.0.
emge2116 said:
I also tried that multiple times already. So, with cable and without cable inserted. But generally I took some other procedure to get to the Android logo, could that be the problem? But even with that procedure, there were a lot of people that were satisfied with the solution, and it worked for them. I used TFM Tool Pro 2.0.0.
Click to expand...
Click to collapse
Even if you use TFM Tool Pro 2.0.0 the tool sends the same command fastboot reboot recovery, so it should not matter. You should get to the recovery mode.
mvikrant97 said:
Even if you use TFM Tool Pro 2.0.0 the tool sends the same command fastboot reboot recovery, so it should not matter. You should get to the recovery mode.
Click to expand...
Click to collapse
Ok, thank you. Well, if you do think of anything else that would be stopping it, or if you have any other idea it would be very appreciated. Thanks again!
emge2116 said:
Ok, thank you. Well, if you do think of anything else that would be stopping it, or if you have any other idea it would be very appreciated. Thanks again!
Click to expand...
Click to collapse
If you use any other device please make a video call so that I can better judge your problem. You can PM me to contact on my Google Duo or any other video chat enabled app.
mvikrant97 said:
If you use any other device please make a video call so that I can better judge your problem. You can PM me to contact on my Google Duo or any other video chat enabled app.
Click to expand...
Click to collapse
Please PM me. I think I may have found solution to your problem.
Hi mvikrant97 was there a solution to this problem that emge2116 was experiencing ? I have the same issue, I can successfully get G10 to recovery mode "no command" screen but then no matter what I try I cannot get the phone into the recovery mode menu. Any help appreciated. thanks
stevesydney2126 said:
Hi mvikrant97 was there a solution to this problem that emge2116 was experiencing ? I have the same issue, I can successfully get G10 to recovery mode "no command" screen but then no matter what I try I cannot get the phone into the recovery mode menu. Any help appreciated. thanks
Click to expand...
Click to collapse
Hello even my Nokia G20 is having same issue after the latest update.
ninetitle said:
Nokia G10 and G20 -- How to enter Recovery Mode?
Does anyone know how to enter the recovery mode on these two Nokia's model G10, and G20????
Normally, it should be a combination between Volume+/- and Power Button...
However, none of these work apparently.
It only enters fastboot mode and nothing else.
I had tried using adb command "adb devices", it shown connected.
But when I tried "adb reboot recovery", nothing happened so far.
I also digging down some searches for the whole evening.
There were only fake instructions which did not work at all.
Does anyone have any thought about this?
Click to expand...
Click to collapse
Hello. Can you check whether you can still access the recovery mode by this method? because now even I'm stuck on No command window after the latest update.
mvikrant97 said:
Hello. Can you check whether you can still access the recovery mode by this method? because now even I'm stuck on No command window after the latest update.
Click to expand...
Click to collapse
Hello, did you manage to solve the problem with entering the menu?
filimonArz said:
Hello, did you manage to solve the problem with entering the menu?
Click to expand...
Click to collapse
No success. Maybe Nokia has changed the way we access the recovery mode in latest update. Hope it comes with a fix in December Security Patch.
hey guys! dont own the phone but a sister does so i was roaming xda for fun and do have an experience with a nokia phone myself heh
see since this phone launched with android 11 so its guaranteed to have userspace fastboot implementation, which is called fastbootd so i do have an idea on forcing ur way into recovery
while ur phone is in the => FASTBOOT MODE...
(not fastbootd)
type this command into ur terminal:
fastboot reboot fastboot
hopefully that command will kick ur phone into fastbootd and then u can just exit out of it and back into recovery
I just unboxed new OnePlus 9 Pro, then i was installing an update and during update phone’s case held power off button, so phone turned off and showing current error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can’t boot in Android and in Recovery mode. Everything working is Fastboot mode. I was trying to “unbrick” phone, installing Fastboot ROM( files like boot.img, recovery.img and so on),but in cmd on my pc shows while using commands like: “fastboot flash boot boot.img” or fastboot -w“, only error “Failed (remote:’Erase is not allowed in Lock State’)”.
Now i want to unlock device state if it is possible.
Remind that phone was just unboxed, so it doesn’t have enabled lever OEM unlocking.
try 'fastboot --set-active=other' or unbrick with MSM Download tool or https://github.com/bkerler/edl
chizari said:
I just unboxed new OnePlus 9 Pro, then i was installing an update and during update phone’s case held power off button, so phone turned off and showing current error.
View attachment 5813705
I can’t boot in Android and in Recovery mode. Everything working is Fastboot mode. I was trying to “unbrick” phone, installing Fastboot ROM( files like boot.img, recovery.img and so on),but in cmd on my pc shows while using commands like: “fastboot flash boot boot.img” or fastboot -w“, only error “Failed (remote:’Erase is not allowed in Lock State’)”.
Now i want to unlock device state if it is possible.
Remind that phone was just unboxed, so it doesn’t have enabled lever OEM unlocking.
Click to expand...
Click to collapse
bro just use the msm tool. there's a tool for every variant of the 9 pro (LE2120-2125). Look for the post on our Device xda and use it.
aIecxs said:
try 'fastboot --set-active=other'
Click to expand...
Click to collapse
cmd says: fastboot: unknown option -- set-active=other
I think it doesn’t understand what‘s --, maybe ’cause i dont have libraries or drivers
ishansnp said:
bro just use the msm tool. there's a tool for every variant of the 9 pro (LE2120-2125). Look for the post on our Device xda and use it.
Click to expand...
Click to collapse
i know about msm tool, but i cant enter in qualcomm emergency mode, cause when i connect phone to pc, it starts charging and when phone starts charging it can’t load “charge image” and gives same error as in the attachment
chizari said:
i know about msm tool, but i cant enter in qualcomm emergency mode, cause when i connect phone to pc, it starts charging and when phone starts charging it can’t load “charge image” and gives same error as in the attachment
Click to expand...
Click to collapse
turn off the phone fully, press volume up and down fully for 3 seconds then while still holding those buttons, plug in the phone with MSM open on your laptop. it should immediately detect the device. the phone screen will still be black and thats normal. once device is shown as connected, just select target O2 and start
disconnect usb, let battery drain, ensure it is really powered off, press both volume keys, connect usb
chizari said:
I just unboxed new OnePlus 9 Pro, then i was installing an update and during update phone’s case held power off button, so phone turned off and showing current error.
View attachment 5813705
I can’t boot in Android and in Recovery mode. Everything working is Fastboot mode. I was trying to “unbrick” phone, installing Fastboot ROM( files like boot.img, recovery.img and so on),but in cmd on my pc shows while using commands like: “fastboot flash boot boot.img” or fastboot -w“, only error “Failed (remote:’Erase is not allowed in Lock State’)”.
Now i want to unlock device state if it is possible.
Remind that phone was just unboxed, so it doesn’t have enabled lever OEM unlocking.
Click to expand...
Click to collapse
MSM Tool time. What model do you have?
aIecxs said:
disconnect usb, let battery drain, ensure it is really powered off, press both volume keys, connect usb
Click to expand...
Click to collapse
ok, i ll try
TheGhost1951 said:
MSM Tool time. What model do you have?
Click to expand...
Click to collapse
LE2123
chizari said:
LE2123
Click to expand...
Click to collapse
Get the MSM tool for LE2123 from this thread....
How To Guide OP9Pro - Repository of MSM Unbrick Tools (TMO, EU, GLO, IN)
Does somebody know how long it takes to let battery drain from 100%?
And maybe, Are there some advices how to let battery drain faster?
You will also need to 1) disable driver signature see this https://www.techpout.com/disable-driver-signature-enforcement/ then reboot computer 2) install latest OnePlus USB drivers then 3) install latest Qualcomm driver then reboot PC 4) start the MSM Tool uncheck 256 and check use lite firehose the click start. 5) start phone in edl mode with button sequence.... MSM should automatically start flashing!
As for edl mode, check to see if you can get to fastboot by holding vol + and - and power buttons down and hold them to see if fastboot loads. This is if you cannot get to edl the button wat as described above.
TheGhost1951 said:
As for edl mode, check to see if you can get to fastboot by holding vol + and - and power buttons down and hold them to see if fastboot loads. This is if you cannot get to edl the button wat as described above.
Click to expand...
Click to collapse
Fastboot menu loads
Now i need to wait few days to let battery drain…
Maybe you know any advices how to let it drain faster?
chizari said:
Fastboot menu loads
Now i need to wait few days to let battery drain…
Maybe you know any advices how to let it drain faster?
Click to expand...
Click to collapse
No need to wait.... Do you have the latest platform-tools installed on PC?
TheGhost1951 said:
No need to wait.... Do you have the latest platform-tools installed on PC?
Click to expand...
Click to collapse
Yeah, i installed it with android studio
chizari said:
Yeah, i installed it with android studio
Click to expand...
Click to collapse
Good now download this file and save it to the platform-tools folder and change the name to twrp.img.... https://dl.twrp.me/lemonadep/twrp-3.7.0_11-0-lemonadep.img make sure the phone is connected to PC in fast boot mode if you have already installed all the drivers....
TheGhost1951 said:
You will also need to 1) disable driver signature see this https://www.techpout.com/disable-driver-signature-enforcement/ then reboot computer 2) install latest OnePlus USB drivers then 3) install latest Qualcomm driver then reboot PC 4) start the MSM Tool uncheck 256 and check use lite firehose the click start. 5) start phone in edl mode with button sequence.... MSM should automatically start flashing!
Click to expand...
Click to collapse
here you mentioned qualcomm drivers, you mean Qualcomm HS-USB QDLoader 9008 Drivers
chizari said:
here you mentioned qualcomm drivers, you mean Qualcomm HS-USB QDLoader 9008 Drivers
Click to expand...
Click to collapse
Yes