Related
Hello Guys, You were Curious To Root Your New Redmi 1s and probably solve all heating problems
Cautions - I'm not Responsible for anything its your choice and work (Nothing will go wrong by the way, I've tried it myself :fingers-crossed: )
Hit Thanks if this has helped you!!!
Lets Start with it
Requisites :-
1 - The Phone Redmi 1s [Indian versions supported]
2 - Some basic knowledge about recovery
3 -Download Attachment
4 - Patience
The PROCESS
1- Download the attachment "update.zip" and place it in the INTERNAL storage of Redmi 1s
2 - Download the SuperSU zip and place it in EXTERNAL sdcard
3 - Go to updater app -> options menu -> reboot to recovery
4 - In the recovery menu choose english (volume buttons will help )
5 - Apply Update to system (something like that), confirm it using volume buttons and power button
6 - Reboot System
7 - After the boot completes go to the updater app again and reboot to recovery (ref step 3)
8 - Well you have Philz recovery loaded within no time and if you have used this recovery before in any other phone then its easy
8.1 - If you are doing it for first time, Use power button and volume button for selection and navigation - install zip ->Choose zip from external_sd (some times sdcard1) -> navigate down and choose the zip and say yes if prompted (All using power button(selection) and volume buttons(navigation)
9 - After flashing completes -> reboot system -> say yes for fixing recovery
10 - done!!! enjoy your rooted redmi 1s
Warrning - you will lose stock recovery, your apps and data wont be hurt
UPDATE VIA OTA SUPPORTED!!!
Go to Next POST for UNROOT
Stock Recovery here --> http://forum.xda-developers.com/redmi-1s/general/stock-recovery-how-to-flash-mi-recovery-t2917905
To cool your device, download no frills cpu control app from play store and set max frequency to 1.19ghz and close it... Now your redmi 1s won't heat up and still it would be lagless
A custom rom based on stock coming soon
Unrooting And OTA updates
Unrooting - - IMPORTANT TO OTA UPDATE
Use the superSU app's in-built settings to unroot it
OTA updates
Your OTA updates wont break if u root it, And you dont Have to Unroot to update!!
To do OTA update, open updater app and download the update and update normally, the update will go good in 15 minutes!, This means Updater app is compatible with this custom recovery, nothing to fear!!
Dear Dev
Thanks for the tutorial. I'm hereby conforming that this tutorial is working great for Xiaomi Redmi 1S,Indian version.
Try it and I'm sure in no way it will harm anything as it didn't to mine.
Thanks & Regards
BOND
Sent from my LG-F240L using Tapatalk
What version of MIUI have you tried this? Also, what is the effect of receiving the OTA update while still have root?
Thanks for this!
Update: Confirmed working, MIUI 36/
I have posted an easy method providing the link below
http://forum.xda-developers.com/showthread.php?t=2881416
azimdotnet said:
I have posted an easy method providing the link below
http://forum.xda-developers.com/showthread.php?t=2881416
Click to expand...
Click to collapse
That's not a easy way... It's the same method, I think Philz recovery is more useful and easy to flash zips and for utilities, cwm recovery is tooo basic, and I've taken some time to explain it for newbies so it's lengthy
Pavan l said:
Unrooting - - IMPORTANT TO OTA UPDATE
Use the superSU app's in-built settings to unroot it
OTA updates
Your OTA updates wont break if u root it, but u need to unroot before updating
To do OTA update, open updater app and download the update and dont flash it
Copy the OTA update zip from downloaded_rom folder in internal memory to External memory and reboot to recovery and flash it as you flashed superSU zip in rooting process
Click to expand...
Click to collapse
What do you mean by "Your OTA updates won't break" does it mean I will still be notified if there is an update?
esrom02 said:
What do you mean by "Your OTA updates won't break" does it mean I will still be notified if there is an update?
Click to expand...
Click to collapse
Yep you will get Update notification and the updater app will download it, but as the recovery is not miui so it wont flash it, just manually flash it after unrooting it
Works like a charm!
Works as told on Redmi 1s (Indian version)
Thank you very much bro
Really appreciate it.
super works great!
successfully rooted my device!
dont work
dont work for me:silly::laugh::highfive::good::fingers-crossed::cyclops:
Update works without removing root
Hi guys,
This is my first time posting on xda forums. I just wanted to share what happened today.
I rooted my redmi 1s according to the post with philz recovery. However today i recieved the update (MIUI v45) and without realizing that the update was already downloaded i clicked on update and got scared because it says here that it wont be able to update because the stock recovery is missing. But what happened was that it booted into philz recovery and updated through that. It took longer than usual around 15 mins I would say but It got updated.
It gave me option to retain the root and the custom recovery to which I said yes. And it worked. I still have my root permssions, all the root apps and phils recovery.
indian rom
i flashed PA IN MY PHONE can i get the indian rom back ??? i cant find indian miui rom anywhere
cwa255 said:
dont work for me:silly::laugh::highfive::good::fingers-crossed::cyclops:
Click to expand...
Click to collapse
What went wrong?
Thanks a lot for this tutorial..
Thanks a ton, works like a charm!!!
I did as explained and got it working with ease!
I also installed no frill cpu app and tinkered with the settings some!
Will report on the changes in heating or battery life due to this underclocking!
Can't undervolting help?
Just one question, why does not the native security pop-up come instead of superSU one?
anurag_xpert said:
Thanks a ton, works like a charm!!!
I did as explained and got it working with ease!
I also installed no frill cpu app and tinkered with the settings some!
Will report on the changes in heating or battery life due to this underclocking!
Can't undervolting help?
Just one question, why does not the native security pop-up come instead of superSU one?
Click to expand...
Click to collapse
Because MIUI superuser is a little buggy and unresponsive sometimes and hence superSU app will do the same work and MIUI will collect private data but superSU app will never do that so I think This SuperSU app is way better than native MIUI
cwa255 said:
dont work for me:silly::laugh::highfive::good::fingers-crossed::cyclops:
Click to expand...
Click to collapse
Tell me What went wrong or what trouble u are facing I'll resolve it here
hi,
I had rooted my Canvas A1, and unrooted it from the super Su, Now I don't have root access but when I tried to the OTA update it showed error,Am currently on LMY47V, Now i tried to use your method but when i reboot into recovery and select recovery mode its showing NO Command Found, can you please help me...
Thanks
I was having the exact same problem. I did the following and this worked for me.
1. Unlocked bootloader using Android one toolkit.
2. rooted again and installed twrp recovery, took full backup.
3. Flashed kitkat stock rom using sp flash tools.
4. Locked bootloader using Android One toolkit.
5. got the update notification right away. ~444 mb.
Successfully updated to Marshmallow.
Let me know if you need further help.
Dalekv7 said:
I was having the exact same problem. I did the following and this worked for me.
1. Unlocked bootloader using Android one toolkit.
2. rooted again and installed twrp recovery, took full backup.
3. Flashed kitkat stock rom using sp flash tools.
4. Locked bootloader using Android One toolkit.
5. got the update notification right away. ~444 mb.
Successfully updated to Marshmallow.
Let me know if you need further help.
Click to expand...
Click to collapse
unlocking bootloader will wipe all the date right ??
shyamkrrish66166 said:
hi,
I had rooted my Canvas A1, and unrooted it from the super Su, Now I don't have root access but when I tried to the OTA update it showed error,Am currently on LMY47V, Now i tried to use your method but when i reboot into recovery and select recovery mode its showing NO Command Found, can you please help me...
Thanks
Click to expand...
Click to collapse
STEP 1: DOWNLOAD the FLASH TOOL from this this link :LINK TO DOWNLOAD FILE
It is almost 30 MB in Size. And EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) of your computer.
STEP 2: DOWNLOAD LOLLIPOP FLASH FILE
DOWNLOAD LINK FOR LOLLIPOP: HERE
After downloading this flash file EXTRACT / UNZIP it to Desktop ( OR SOMEWHERE ) on your computer.
STEP 3: NOW INSTALL DRIVERS:
YOU NEED TO BE ON WINDOWS 7 TO INSTALL DRIVERS (WINDOWS 8 DOESN'T SUPPORT THIS DRIVER / PHONE IS NOT DETECTED)
DOWNLOAD DRIVERS from this link : HERE
EXTRACT AND INSTALL THE DRIVERS : Next next next and finish If you see an security warning ( a red coloured pop up ) choose INSTALL IT ANYWAY
IT IS RECOMMENDED YOU TO RESTART YOUR PC.
STEP 4:
Now we have Extrated /unziped 2 files. One is FLASHTOOLS and other is FLASH FILE and Extracted it or unziped it to Desktop or Somewhere.
One of it having the name SP_Flash_Tool_exe_windows_v5.1424.00 or open both folders then one of it having the flashing tool. OPEN THE FOLDER NAMED SP_Flash_Tool_exe_windows_v5.1424.00
it contains an application named fashtool.exe OPEN IT
NOW THE APPLICATION IS ASKING FOR SCATTER LOADING FILE
its a txt file which is on the extracted flash file folder
BROWSE it by clicking Button named Scatter Loading
click OPEN
STEP 5:
HERE IN THE DROPDOWN BOX, IT SAYS DOWNLOAD ONLY, CLICK ON IT AND SELECT FIRMWARE UPDATE ONLY.
IF YOU SELECT FORMAT + DOWNLOAD, THEN YOU WILL LOOSE IMEI NUMBER.
NOW CLICK DOWNLOAD BUTTON ( GREEN ARROWED BUTTON NAMED DOWNLOAD )
IN CASE YOU LOOSE IMEI NUMBER, THEN REFER HERE
STEP 6:
Now SWITCH OFF your PHONE and REMOVE BATTERY
STEP 7:
CONNECT your PC via USB CABLE
wait for the driver Detection.
THE FLASHING PROCESS WILL START AUTOMATICALLY you can See the progress in progress bar which is on bottom of flashing tool Application.
WHEN IT IS FINISHED DISCONNECT USB AND RESTART YOUR PHONE.
NOW YOU WILL GET LOLLIPOP UPDATE IMEDIATELY.
:good::good:HIT THANKS IF HELPED!:good::good:
This is the screen I am getting when I enter recovery mode
Dalekv7 said:
I was having the exact same problem. I did the following and this worked for me.
1. Unlocked bootloader using Android one toolkit.
2. rooted again and installed twrp recovery, took full backup.
3. Flashed kitkat stock rom using sp flash tools.
4. Locked bootloader using Android One toolkit.
5. got the update notification right away. ~444 mb.
Successfully updated to Marshmallow.
Let me know if you need further help.
Click to expand...
Click to collapse
this is the screen I am getting when I enter recovery mode
shyamkrrish66166 said:
This is the screen I am getting when I enter recovery mode
Click to expand...
Click to collapse
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:
shyamkrrish66166 said:
this is the screen I am getting when I enter recovery mode
Click to expand...
Click to collapse
Just follow the method suggested by Raizen above. But there are two things I want to add:-
1. The drivers work successfully on windows 8 and 10. It's just that you have to turn off driver signature verification for a while. So don't worry if you have w8 or 10.
2. After flashing kitkat you will get a notification to update to Marshmallow and not lollipop.
P.s.- My opinion on Marshmallow- Everything's fine except the battery backup. I don't know if the issue has been resolved now. But I faced more than 30% drain overnight with location and WiFi off. I'm on CyanogenMod 12.1 now and I find it much better both in terms of battery backup and functionality.
Thanks guys. I will try it and let you know.
Dalekv7 said:
Just follow the method suggested by Raizen above. But there are two things I want to add:-
1. The drivers work successfully on windows 8 and 10. It's just that you have to turn off driver signature verification for a while. So don't worry if you have w8 or 10.
2. After flashing kitkat you will get a notification to update to Marshmallow and not lollipop.
P.s.- My opinion on Marshmallow- Everything's fine except the battery backup. I don't know if the issue has been resolved now. But I faced more than 30% drain overnight with location and WiFi off. I'm on CyanogenMod 12.1 now and I find it much better both in terms of battery backup and functionality.
Click to expand...
Click to collapse
Thanks. .. I will try it and let you knw
Raizen12465 said:
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:
Click to expand...
Click to collapse
Raizen12465 said:
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:
Click to expand...
Click to collapse
Hi , one more doubt, I had rooted my phone ,later I unrooted it from the super su ,now I don't have root access, can I root it again in the normal way, I used kingoroot but it failed,
thanks
shyamkrrish66166 said:
Hi , one more doubt, I had rooted my phone ,later I unrooted it from the super su ,now I don't have root access, can I root it again in the normal way, I used kingoroot but it failed,
thanks
Click to expand...
Click to collapse
You can use kingroot or android one toolkit to root your phone if you are running KITKAT or LOLLIPOP.
To root MARSHMALLOW, you need to follow the steps mentioned HERE
:good::good:
I wanna tell u to use battery doctor to save ur battery with its new feature ''super optimize' , I m using it and only 8-10% drain out in one night with data on.
Sent from my Micromax AQ4501 using xda premium
---------- Post added at 06:13 PM ---------- Previous post was at 06:09 PM ----------
Dalekv7 said:
Just follow the method suggested by Raizen above. But there are two things I want to add:-
1. The drivers work successfully on windows 8 and 10. It's just that you have to turn off driver signature verification for a while. So don't worry if you have w8 or 10.
2. After flashing kitkat you will get a notification to update to Marshmallow and not lollipop.
P.s.- My opinion on Marshmallow- Everything's fine except the battery backup. I don't know if the issue has been resolved now. But I faced more than 30% drain overnight with location and WiFi off. I'm on CyanogenMod 12.1 now and I find it much better both in terms of battery backup and functionality.
Click to expand...
Click to collapse
I wanna tell u to use battery doctor to save ur battery with its new feature ''super optimize' , I m using it and only 8-10% drain out in one night with data on.
Sent from my Micromax AQ4501 using xda premium
shyamkrrish66166 said:
Thanks. .. I will try it and let you knw
Click to expand...
Click to collapse
Hi,
In marshmallow is there an option to use as card as the internal memory, so that we could install more apps ??
shyamkrrish66166 said:
hi,
I had rooted my Canvas A1, and unrooted it from the super Su, Now I don't have root access but when I tried to the OTA update it showed error,Am currently on LMY47V, Now i tried to use your method but when i reboot into recovery and select recovery mode its showing NO Command Found, can you please help me...
Thanks
Click to expand...
Click to collapse
Hey man ...after showing no command
Press power+ vol up for 5 sec and release
U will be in recovery menu
Hit thanks
I'm trying to flash firmware in Karbonn Sparkle V (Android One) but it is not getting connected with computer. I installed the drivers manually in the computer but when i connect the device, the computer trying to install the device driver software again and getting failed. How to solve the problem?
yes this works
Raizen12465 said:
After entering recovery mode, you will see a dead android bot. Below, you will see NO COMMAND
Here, hold down the power button and press the volume up button once. Then release both buttons.
Now, you are successfully in recovery mode.
:good::good:HIT THANKS IF HELPED:good::good:
Click to expand...
Click to collapse
This method works thanks!!!?
I used the wrong listing
i wanted to open bootlcoker, twrp, root twrp
Hello guys.
Ich hope you can help me.
I am in a Bootloop.
I made the fault to unlock the bootloader first.
than i booted vie adb fastboot (not flash) TWRP and installed supersu.zip
Now i have no twrp because i wanted isntall twrp over android (now oor) with app "twrp manager"
Now i have a "bootloop"
it won't restart again and again but but it hangs while logo and the BLue LED ist blinking/pulsing.
DOwnload mode possible.
SOmething more possible?
Thanks for help
Xperience Z said:
I used the wrong listing
i wanted to open bootlcoker, twrp, root twrp
Hello guys.
Ich hope you can help me.
I am in a Bootloop.
I made the fault to unlock the bootloader first.
than i booted vie adb fastboot (not flash) TWRP and installed supersu.zip
Now i have no twrp because i wanted isntall twrp over android (now oor) with app "twrp manager"
Now i have a "bootloop"
it won't restart again and again but but it hangs while logo and the BLue LED ist blinking/pulsing.
DOwnload mode possible.
SOmething more possible?
Thanks for help
Click to expand...
Click to collapse
pull out battery,try to put phone in download mode ( hold Volume Up Button and insert usb cable),flash it with kdz of android version which you have before on phone 5.1 or 6.0 ,use this tutorial http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
Ok i will try later. now i have another problem i will use another thread
Xperience Z said:
Ok i will try later. now i have another problem i will use another thread
Click to expand...
Click to collapse
Did it work? I have a similar problem but It also boot loops in download mode.
I don't know. Sry.
One day later my Display broked so i used only my lgg4 after
Xperience Z said:
I used the wrong listing
i wanted to open bootlcoker, twrp, root twrp
Hello guys.
Ich hope you can help me.
I am in a Bootloop.
I made the fault to unlock the bootloader first.
than i booted vie adb fastboot (not flash) TWRP and installed supersu.zip
Now i have no twrp because i wanted isntall twrp over android (now oor) with app "twrp manager"
Now i have a "bootloop"
it won't restart again and again but but it hangs while logo and the BLue LED ist blinking/pulsing.
DOwnload mode possible.
SOmething more possible?
Thanks for help
Click to expand...
Click to collapse
Reflash with LGUP?
The problem above was from my xperia
the first and second problem was solved. but then broke the display.
don't know how i did fix.
I lost the root updating and now I do not know how to root in emui 9.1.
- I no longer have TWRP and MAGISK.
- And try to root with magisk using VOL+ and always enter EMUI's eRecovery.
I do not know what else to do I need help:crying::crying::crying:
Did you update with the emui updater or with the e recovery? Did you have twrp on the e recovery and magisk on the normal recovery as advised by Freya? Did you try you reroot your device?
AllanRSS said:
Did you update with the emui updater or with the e recovery? Did you have twrp on the e recovery and magisk on the normal recovery as advised by Freya? Did you try you reroot your device?
Click to expand...
Click to collapse
I just made root few minutes ago, and I want factory setup, I installed [ROM][AL00][5/9/19] Mate 20 X GlobAL00ized 2.2 (EMUI 9.1 fw 120) [Debloated|DeOdex]
only the update_full.zip not the transformation rom.
Hi, I have EVR-AL00, I installed this ROM until step 4:
https://forum.xda-developers.com/mate-20-x/development/rom-mate-20-x-global00ized-2-0-emui-9-1-t3920956
But I have a lot of bugs and issius like OPTIMIZER doesn`t work and color and temperature, I don't know why. And now I want to get back to original custom rom using EMUI's eRecovery, pressing vol+ after ON. Starting dwonload version: 9.1.0.120 (C00E119R1P17) untill 99%, and don't install or continue and says "error during autentification". I tried to connect to HiSuite and HIsuite don't recognice my cell phone.
Where I can find Stock EVR-AL00 firmware, emui 9.0 or 9.1.Please help.
Kurocham said:
I lost the root updating and now I do not know how to root in emui 9.1.
- I no longer have TWRP and MAGISK.
- And try to root with magisk using VOL+ and always enter EMUI's eRecovery.
I do not know what else to do I need help:crying::crying::crying:
Click to expand...
Click to collapse
Please read instruction for flashing carefully, especially paraph 6. Sometimes you have to flash twrp many times before succeed. And follow the procedure with buttons thoroughly.
I managed to fix several things I managed to fix the official emui 9.1, I managed to have root in emui 9.1 with magisk, because it does not work the vol + the only thing that works is to install the administrator, to pass the magisk recovery file to try the primer and after it load restart , then formattee of factory and the cell will stay as it always was but now with root that great
@Kurocham, can you explain this please?
I have mate 20x emui 9.1.
Can't work magisk patch root. It goes but sms have fc and phone app is somehow empty.
What is your solution feom stock rom to root?
Thanka a lot
ivanox1972 said:
@Kurocham, can you explain this please?
I have mate 20x emui 9.1.
Can't work magisk patch root. It goes but sms have fc and phone app is somehow empty.
What is your solution feom stock rom to root?
Thanka a lot
Click to expand...
Click to collapse
Same here i am on emui 9.1 .0.123 with magisk patched and contact and dialer cannot open at all but if boot normal without magisk it fine
Solution is
Backup all, then factory reset. After reset don't allow phone to boot, immediately go to fastboot and flash recovery_ramdisk with magisk. Then reboot and wait for phone first init. It tells that root is found, press ok.
After that we hawe root and SMS working
Solution - https://forum.xda-developers.com/mate-20-x/how-to/guide-root-al00-emui-9-1-t3938483
@facet_ I wrote exactly same in upper post...
Kurocham said:
Hi, I have EVR-AL00, I installed this ROM until step 4:
https://forum.xda-developers.com/mate-20-x/development/rom-mate-20-x-global00ized-2-0-emui-9-1-t3920956
But I have a lot of bugs and issius like OPTIMIZER doesn`t work and color and temperature, I don't know why. And now I want to get back to original custom rom using EMUI's eRecovery, pressing vol+ after ON. Starting dwonload version: 9.1.0.120 (C00E119R1P17) untill 99%, and don't install or continue and says "error during autentification". I tried to connect to HiSuite and HIsuite don't recognice my cell phone.
Where I can find Stock EVR-AL00 firmware, emui 9.0 or 9.1.Please help.
Click to expand...
Click to collapse
How did you resolve the issue with OPTIMIZER?
abbas said:
How did you resolve the issue with OPTIMIZER?
Click to expand...
Click to collapse
reinstall as many times as necessary I think I install everything from the beginning like 5 times
ivanox1972 said:
Solution is
Backup all, then factory reset. After reset don't allow phone to boot, immediately go to fastboot and flash recovery_ramdisk with magisk. Then reboot and wait for phone first init. It tells that root is found, press ok.
After that we hawe root and SMS working
Click to expand...
Click to collapse
My bootloader is unlocked. However I got the message "Failed (remoted: Command not allowed)" when I try to flash recovery_ramdisk with magisk. Even after factory reset I got immediately to fastboot I still get the same Failed message. Is there a solution to this. Thank for your answer.
Look better, maybe you made error in writing command
ivanox1972 said:
Look better, maybe you made error in writing command
Click to expand...
Click to collapse
Thanks for your answer. However the problem is definitely not in writing command. I have rooted many emui 9 rom before on my mate 9, 10, Honor note 10 and now 20 x so that I made a batch file to root these phones. Also the error message is different when you made an error in writing command. The message "Failed (remote: Command not allowed)" occurred on my Honor note 10 before and I turn off "Find my phone" and it worked. Now I turn off "Find my phone" in my mate 20 x and it did not work.
ivanox1972 said:
Look better, maybe you made error in writing command
Click to expand...
Click to collapse
I reset the phone and I can flash recovery ramdisk with magisk now.
ivanox1972 said:
Solution is
Backup all, then factory reset. After reset don't allow phone to boot, immediately go to fastboot and flash recovery_ramdisk with magisk. Then reboot and wait for phone first init. It tells that root is found, press ok.
After that we hawe root and SMS working
Click to expand...
Click to collapse
but will it actually wipe all the app and data ?
Yes of course. You must do this. Backup it via hi suite and then restore when rooted. Don't worry, work!
ivanox1972 said:
Yes of course. You must do this. Backup it via hi suite and then restore when rooted. Don't worry, work!
Click to expand...
Click to collapse
Please tell step by step
Hello i found a little way for have root & and working xposed with no bug on last firmware WW_17.1810.1910.73 & WW_17.1810.1911.110
Stock Recovery
You need adb drviers and unlocked ZenFone 6 on WW_17.1810.1910.73 or WW_17.1810.1911.110
First install last Magisk Manager
Open setting of Magisk and add custom update channel https://github.com/solohsu/magisk_files#custom-update-channel
Download ZenFone6RootXposed-10.73.img or ZenFone6RootXposed-11.110 (i have add stock boot11.110.img, we will need it for next update)
http://www.mediafire.com/folder/skzceszqu8d3j/AsusZenFone6
Now reboot device to bootloader
Code:
adb reboot bootloader
And boot with ZenFone6RootXposed-10.73.img or ZenFone6RootXposed-11.110 (not flash it, your device have a chance to bootloop)
Code:
fastboot boot ZenFone6RootXposed-10.73.img
Code:
fastboot boot ZenFone6RootXposed-11.110.img
The devices reboot automaticly
Go to Magisk and install Magisk, choose direct install
Reboot and Enjoy root
if you want Xposed flash it with magisk :
Riru Core
I use YAHFA
Android 10 ElderDrivers Xposed
And the manager
Xposed Installer​
Good morning
I have tried several times root for Android 10
The Magisk part works smoothly, but the Xposed part never works, producing a bootloop
I have extracted the boot and applied magisk, loaded the Riru Core module, but when loading ElderDrivers, the phone stays in bootloop
Do you know what the reason may be?
Works splendid, great guide!
Tried to use Sandhook first, but ended up with YAHFA instead due some xposed problems (xposed not detected).
Had an old version of Android 9, so i first upgraded it to "UL-ASUS_I01WD-ASUS-16.1220.1909.194-1.1.1" (only supported upgrade path - 9 to 10), then to "UL-ASUS_I01WD-ASUS-17.1810.1910.73-1.1.1-user" (your specified .73)
- Later patching with your img
Thanks
it is impossible
Starting with .73 stock
at the moment I install Riru Yahfa, following the manual, it does not start again, unless install the official boot
the device stays on the Zenfone boot screen without doing anything else
I have tried the version supplied by Magisk, I don't know if you have tried another version
Why will we need the stock boot for the next update? We can't make menully update after root? I just want to make root not install xposed.
Sent from my ASUS_I01WD using Tapatalk
thanks a lot, this a really easy way to get root, but i have a little issue, i had my phone with NO pin code or fingerprint before using this method, and now if i want to ad a pin, password or gesture it simply does not get saved, every time i do the procedure to set the pin it does like if i did nothing, anyone has this issue, or know how to fix it, is there a problem if i hard reset?
any help will be good
In the latest build .110 ctsprofile is false while basicintegrity is true. Is it due to the root or the rom has not been signed by google?
Rom1995 said:
In the latest build .110 ctsprofile is false while basicintegrity is true. Is it due to the root or the rom has not been signed by google?
Click to expand...
Click to collapse
https://zentalk.asus.com/en/discussion/comment/35355/#Comment_35355
baster72 said:
Why will we need the stock boot for the next update? We can't make menully update after root? I just want to make root not install xposed.
Sent from my ASUS_I01WD using Tapatalk
Click to expand...
Click to collapse
just flash ZenFone6RootXposed-10.73 or ZenFone6RootXposed-11.110 and you willl have it
hdsporty50 said:
Good morning
I have tried several times root for Android 10
The Magisk part works smoothly, but the Xposed part never works, producing a bootloop
I have extracted the boot and applied magisk, loaded the Riru Core module, but when loading ElderDrivers, the phone stays in bootloop
Do you know what the reason may be?
Click to expand...
Click to collapse
hdsporty50 said:
it is impossible
Starting with .73 stock
at the moment I install Riru Yahfa, following the manual, it does not start again, unless install the official boot
the device stays on the Zenfone boot screen without doing anything else
I have tried the version supplied by Magisk, I don't know if you have tried another version
Click to expand...
Click to collapse
Don't flash Xposed using Magisk Download, flash it manualy :
EdXposed v0.4.6.0_beta
You will always get bootloop with v0.4.5.1_beta
_______________________________________
UPDATE for 11.110
flash boot.10.73.img for update safe
And do the same with 11.110 files.
Don't forget to add custom update channel in Magisk
And use v0.4.6.0_beta for xposed
Why can't we have any YouTube guides for anything related to this phone?
vernj123 said:
Why can't we have any YouTube guides for anything related to this phone?
Click to expand...
Click to collapse
I want to do it but I don't have another device to record.
Someone try this method to install xposed? I afraid to get bootloop.
Sent from my ASUS_I01WD using Tapatalk
Hi everyone, I hope somebody can help me out to solve an issue I just got with my zenfone,
After using an advise from DaConcho for getting back screen lock after unlocking bootloader I got in another situation.
I followed the instructions from the post and everything was going fine, I boot thought adb with the provided patched boot for Q .110 and that far no issues , when I open magisk manager to download magisk from the alternative source magisk manager prompt to complete the installation downloading some necessary files, not the magisk version, just said some files, and I click yes, then it installed something and reboot, phone started fine, but when I wanted to start the process again I found out that I loose PC connectivity.
I have no connection at all, even if I manually boot in bootloader I can't connect to PC, so no adb commands,
Please can someone help
does someone has the patched boot image for new .119 firmaware, i updated and losee magisk
baster72 said:
Someone try this method to install xposed? I afraid to get bootloop.
Click to expand...
Click to collapse
Don't be afraid just flash stock boot if you get bootloop
joesa said:
does someone has the patched boot image for new .119 firmaware, i updated and losee magisk
Click to expand...
Click to collapse
I update my links you can get stock boot here Boot & RootedBoot ZenFone6
MystikMan97130 said:
Don't be afraid just flash stock boot if you get bootloop
I update my links you can get stock boot here Boot & RootedBoot ZenFone6
Click to expand...
Click to collapse
Thanks a lot !!! You really help a lot with this method
MystikMan97130 said:
Don't be afraid just flash stock boot if you get bootloop
I update my links you can get stock boot here Boot & RootedBoot ZenFone6
Click to expand...
Click to collapse
can you please check link, it is not working, i can see folder but can not download
Hello, direct link:
ZenFone6RootXposed
Nice, thanks a lot for this! Rooting on stock with unlocked bootloader worked for me perfectly (did not check xposed)!
est-ce que l'on perd ses données en faisant le root ?
merci!