I lost the root updating and now I do not know how to root in emui 9.1.
- I no longer have TWRP and MAGISK.
- And try to root with magisk using VOL+ and always enter EMUI's eRecovery.
I do not know what else to do I need help:crying::crying::crying:
Did you update with the emui updater or with the e recovery? Did you have twrp on the e recovery and magisk on the normal recovery as advised by Freya? Did you try you reroot your device?
AllanRSS said:
Did you update with the emui updater or with the e recovery? Did you have twrp on the e recovery and magisk on the normal recovery as advised by Freya? Did you try you reroot your device?
Click to expand...
Click to collapse
I just made root few minutes ago, and I want factory setup, I installed [ROM][AL00][5/9/19] Mate 20 X GlobAL00ized 2.2 (EMUI 9.1 fw 120) [Debloated|DeOdex]
only the update_full.zip not the transformation rom.
Hi, I have EVR-AL00, I installed this ROM until step 4:
https://forum.xda-developers.com/mate-20-x/development/rom-mate-20-x-global00ized-2-0-emui-9-1-t3920956
But I have a lot of bugs and issius like OPTIMIZER doesn`t work and color and temperature, I don't know why. And now I want to get back to original custom rom using EMUI's eRecovery, pressing vol+ after ON. Starting dwonload version: 9.1.0.120 (C00E119R1P17) untill 99%, and don't install or continue and says "error during autentification". I tried to connect to HiSuite and HIsuite don't recognice my cell phone.
Where I can find Stock EVR-AL00 firmware, emui 9.0 or 9.1.Please help.
Kurocham said:
I lost the root updating and now I do not know how to root in emui 9.1.
- I no longer have TWRP and MAGISK.
- And try to root with magisk using VOL+ and always enter EMUI's eRecovery.
I do not know what else to do I need help:crying::crying::crying:
Click to expand...
Click to collapse
Please read instruction for flashing carefully, especially paraph 6. Sometimes you have to flash twrp many times before succeed. And follow the procedure with buttons thoroughly.
I managed to fix several things I managed to fix the official emui 9.1, I managed to have root in emui 9.1 with magisk, because it does not work the vol + the only thing that works is to install the administrator, to pass the magisk recovery file to try the primer and after it load restart , then formattee of factory and the cell will stay as it always was but now with root that great
@Kurocham, can you explain this please?
I have mate 20x emui 9.1.
Can't work magisk patch root. It goes but sms have fc and phone app is somehow empty.
What is your solution feom stock rom to root?
Thanka a lot
ivanox1972 said:
@Kurocham, can you explain this please?
I have mate 20x emui 9.1.
Can't work magisk patch root. It goes but sms have fc and phone app is somehow empty.
What is your solution feom stock rom to root?
Thanka a lot
Click to expand...
Click to collapse
Same here i am on emui 9.1 .0.123 with magisk patched and contact and dialer cannot open at all but if boot normal without magisk it fine
Solution is
Backup all, then factory reset. After reset don't allow phone to boot, immediately go to fastboot and flash recovery_ramdisk with magisk. Then reboot and wait for phone first init. It tells that root is found, press ok.
After that we hawe root and SMS working
Solution - https://forum.xda-developers.com/mate-20-x/how-to/guide-root-al00-emui-9-1-t3938483
@facet_ I wrote exactly same in upper post...
Kurocham said:
Hi, I have EVR-AL00, I installed this ROM until step 4:
https://forum.xda-developers.com/mate-20-x/development/rom-mate-20-x-global00ized-2-0-emui-9-1-t3920956
But I have a lot of bugs and issius like OPTIMIZER doesn`t work and color and temperature, I don't know why. And now I want to get back to original custom rom using EMUI's eRecovery, pressing vol+ after ON. Starting dwonload version: 9.1.0.120 (C00E119R1P17) untill 99%, and don't install or continue and says "error during autentification". I tried to connect to HiSuite and HIsuite don't recognice my cell phone.
Where I can find Stock EVR-AL00 firmware, emui 9.0 or 9.1.Please help.
Click to expand...
Click to collapse
How did you resolve the issue with OPTIMIZER?
abbas said:
How did you resolve the issue with OPTIMIZER?
Click to expand...
Click to collapse
reinstall as many times as necessary I think I install everything from the beginning like 5 times
ivanox1972 said:
Solution is
Backup all, then factory reset. After reset don't allow phone to boot, immediately go to fastboot and flash recovery_ramdisk with magisk. Then reboot and wait for phone first init. It tells that root is found, press ok.
After that we hawe root and SMS working
Click to expand...
Click to collapse
My bootloader is unlocked. However I got the message "Failed (remoted: Command not allowed)" when I try to flash recovery_ramdisk with magisk. Even after factory reset I got immediately to fastboot I still get the same Failed message. Is there a solution to this. Thank for your answer.
Look better, maybe you made error in writing command
ivanox1972 said:
Look better, maybe you made error in writing command
Click to expand...
Click to collapse
Thanks for your answer. However the problem is definitely not in writing command. I have rooted many emui 9 rom before on my mate 9, 10, Honor note 10 and now 20 x so that I made a batch file to root these phones. Also the error message is different when you made an error in writing command. The message "Failed (remote: Command not allowed)" occurred on my Honor note 10 before and I turn off "Find my phone" and it worked. Now I turn off "Find my phone" in my mate 20 x and it did not work.
ivanox1972 said:
Look better, maybe you made error in writing command
Click to expand...
Click to collapse
I reset the phone and I can flash recovery ramdisk with magisk now.
ivanox1972 said:
Solution is
Backup all, then factory reset. After reset don't allow phone to boot, immediately go to fastboot and flash recovery_ramdisk with magisk. Then reboot and wait for phone first init. It tells that root is found, press ok.
After that we hawe root and SMS working
Click to expand...
Click to collapse
but will it actually wipe all the app and data ?
Yes of course. You must do this. Backup it via hi suite and then restore when rooted. Don't worry, work!
ivanox1972 said:
Yes of course. You must do this. Backup it via hi suite and then restore when rooted. Don't worry, work!
Click to expand...
Click to collapse
Please tell step by step
Related
[How to root] Honor 6x -B367- with Magisk 14
(fast method for professional users)
Use TWRP Recovery from the attachment.
Make a Backup first.
Uninstall SuperUser App-
[*]in TWRP flash unSu.zip-
[*]with TWRP restore the Stock Kernel (Boot Partition) from a backup-
[*]flash in TWRP Magisk-v14.0.zip-
[*]the magisk app is automatic installed .
[*]Reboot-
[*]flash in TWRP BusyBox-Magisk-1.25.zip-
[*]for Ad Block Plus first install the app and then flash the zip-
[*]if the flashing fails, please add the modules in the Magisk Manager App.
[*]Don't experiment with Xposed!
[*]The SafetyNet is thereby lost.
TWRP:
https://mega.nz/#!9l0jFQaZ!WJipSNyrecAuyok4Wpp_NM6fxWyFPWwn2aP34tW50sU
There's no point in installing MagiskManager. When you flash Magisk.zip, it automatically installs the manager apk. If your phone is not rooted, all you have to do is to flash the Magisk.zip in TWRP and that's it.
Thanks for your feedback. I will change the tuto immediately.
Can somebody share the boot.img for c432b367?
Thanks guys!
actually you can fix safetynet in honor 6x:
1. disable Hisuite HDB in settings>advanced settings>security
2. Go to developer options and enable adb debuging
3. go to apps and go to google play services and force stop it. and clear data (you know how to do it...)
4. run safetynet test
5. profit?
NOTE:you'll do this again if you reboot it except number 1...
EDIT: it works for me in my stock rom but IDK in other roms...
https://i.imgur.com/J8obP1l.png
I keep getting "error: cannot load 'berlin311'" when trying to flash twrp
Please help
If we have twrp from open kirin team installed, do we still need to flash this twrp or can use the same one?
Just realized that this is the same OpenKirin TWRP. Proceeding with Magisk for the first time now
Any thoughts on the error loading twrp?
Challah said:
Any thoughts on the error loading twrp?
Click to expand...
Click to collapse
I did not face any issue.. Was smooth. I am using magisk now
shashank1320 said:
I did not face any issue.. Was smooth. I am using magisk now
Click to expand...
Click to collapse
Sadly that doesn't help me much
Challah said:
Sadly that doesn't help me much
Click to expand...
Click to collapse
Which version of the are you using. I had one from open kirin team. Are you trying to boot to recovery with USB connected? Are you on emui 4/5?
Emui 5, tried using both versions, the one from your thread and the one from the kirin team thread.
Challah said:
Emui 5, tried using both versions, the one from your thread and the one from the kirin team thread.
Click to expand...
Click to collapse
Both are same file. Not sure why this issue. I flashed today couple of hours ago to install magisk as i did fload to be on stock.
I have tried all the guides, same issue each time.
My phone is unlocked, but I get an error loading the img
Challah said:
I have tried all the guides, same issue each time.
My phone is unlocked, but I get an error loading the img
Click to expand...
Click to collapse
Did you try relocking amd unlocking the bootloader again? Try once buddy
I figured it out, I had adb installed previously and it was opening it from a different place than I expected, so Berlin was in the wrong folder.
shashank1320 said:
Did you try relocking amd unlocking the bootloader again? Try once buddy
Click to expand...
Click to collapse
Only unlocking with unlock code. That's enough. Then activate OEM unlock and Debugging Mode in the Settings.
ChinHon said:
Only unlocking with unlock code. That's enough. Then activate OEM unlock and Debugging Mode in the Settings.
Click to expand...
Click to collapse
Working for me buddy. I was helping him as he had issue
Thanks for this..i got the confidence and was able to install magisk without issues which was not doing earlier
When on the step to flash busybox_magisk I get notified that magisk is not installed, magisk needs to be installed first, and then error "Updater process ended with ERROR: 1 Error installing zip file '/external_sd/BusyBox-Magisk-1.25.zip'?
I flashed magisk again, rebooted to recovery, tried busybox-magisk again, same error.
Hi.. I have recently updated my honor 7x to emui 8 based on android oreo. However when I try to flash TWRP I get an error notification as 'partition length get error'. Can someone help how to install TWRP on honor 7x after update to oreo.
Ypk2020 said:
Hi.. I have recently updated my honor 7x to emui 8 based on android oreo. However when I try to flash TWRP I get an error notification as 'partition length get error'. Can someone help how to install TWRP on honor 7x after update to oreo.
Click to expand...
Click to collapse
the partions changed in oreo to flash new recovery you have to type ( fastboot flash recovery_ramdisk ) and it will work
Not working
dcraffam said:
the partions changed in oreo to flash new recovery you have to type ( fastboot flash recovery_ramdisk ) and it will work
Click to expand...
Click to collapse
Thanks for the reply. I tried adding ramdisk but doesnt work..
Ypk2020 said:
Thanks for the reply. I tried adding ramdisk but doesnt work..
Click to expand...
Click to collapse
You must do it exactly as I put it the new partion is (recovery_ramdisk) it won't work without the underscore
Not working
dcraffam said:
You must do it exactly as I put it the new partion is (recovery_ramdisk) it won't work without the underscore
Click to expand...
Click to collapse
Yess I did exactly the same.. This time I didn't even get any etror message. It said okay.. Still my phone boots normal with stock recovery..
Ypk2020 said:
Yess I did exactly the same.. This time I didn't even get any etror message. It said okay.. Still my phone boots normal with stock recovery..
Click to expand...
Click to collapse
The trick is to hold vol up and vol down plus power button if your usb is connected. Wait till it sais rebooting. If no USB connected just vol up and power.
Having same problem
allrockedout said:
The trick is to hold vol up and vol down plus power button if your usb is connected. Wait till it sais rebooting. If no USB connected just vol up and power.
Click to expand...
Click to collapse
I tried but it didn't worked
Kakshi Naresh said:
I tried but it didn't worked
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-7x/development/oreo-twrp-complete-backup-t3764500
Kakshi Naresh said:
I tried but it didn't worked
Click to expand...
Click to collapse
please add screenshots of fastboot flashing the recovery, maybe picture tells wore detail than you notice.
same problem sir....
plz help me
Can it comfortable with BND-AL10,with running official oreo
---------- Post added at 08:14 AM ---------- Previous post was at 08:02 AM ----------
Can it comfortable with BND-AL10,with running official oreo
Kakshi Naresh said:
I tried but it didn't worked
Click to expand...
Click to collapse
Kakshi Naresh said:
mrmazak said:
So you are all ok?
Click to expand...
Click to collapse
Dude I flashed twrp
But it is stucked what to do
Click to expand...
Click to collapse
stucked at logo screen?
from that page only use / try these two
imagemount.img
twrp_complete.img
but there is twrp from p10 lite that works better--- it has working encryption
abd today someone found that twrp for p20 lite also works better.
mrmazak said:
stucked at logo screen?
from that page only use / try these two
imagemount.img
twrp_complete.img
but there is twrp from p10 lite that works better--- it has working encryption
abd today someone found that twrp for p20 lite also works better.
Click to expand...
Click to collapse
Where can I find that
Kakshi Naresh said:
Where can I find that
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p20-lite/development/recovery-testing-t3783587
Not able to boot into TWRP
I have tried a dozen image files until now...
I am using honor 7x...
My software is bricked... I am trying to flash TWRP... On pc, there are no errors... But in phone, stock recovery comes up
Yeah recovery_ramdisk is working for me but can anyone tell what is the new partition name for erecovery or recovery2 earlier??
Ypk2020 said:
Yess I did exactly the same.. This time I didn't even get any etror message. It said okay.. Still my phone boots normal with stock recovery..
Click to expand...
Click to collapse
I'm facing the same problem
- Boot phone normally
- Connect USB Cable
- Enable USB Debugging
(Make sure adb is installed, and you pressed "Yes" when device asked for allowing adb on your PC)
- type in cmd: adb reboot recovery
This should boot your device into TWRP. Works for me.
SaranGoda said:
I have tried a dozen image files until now...
I am using honor 7x...
My software is bricked... I am trying to flash TWRP... On pc, there are no errors... But in phone, stock recovery comes up
Click to expand...
Click to collapse
The same thing happens in my case (mine is BND Al 10) When flashing Twrp it say 'okay' but later, it boots normally I to the system or shows that 'your phone is unlocked' page
Hey guys, so this is my problem:
I've bought a OnePlus 5T some days after its release. When i searched for a tutorial teaching how to root the device (i don't know the root process deeply), there were just a few videos at that time. This was the video i watched to root me device (some people already told me that this isn't the best method, but it was what I had at the moment):
https://www.youtube.com/watch?v=9SsIH6iauYQ
As i told, i'm a layman and doesn't know the root process, and now i need to update urgently my Android (its currently on the Android version it was when i bought it: 7.1.1). I've found some threads with a similar situation, but i got lost in all the details that i don't know, like "you need to unlock the bootloader", "just flash the TWRP and stuff", but i need a more simple language like "click this, click that". I really need it now, so i'm even thinking about searching for someone trustable to do it or transfering some cash to anyone who helps me, because i don't wanna lose anything important in the process. Anyone that can help me, PLEASE?!
Thanks in advance
djmarkybr said:
Hey guys, so this is my problem:
I've bought a OnePlus 5T some days after its release. When i searched for a tutorial teaching how to root the device (i don't know the root process deeply), there were just a few videos at that time. This was the video i watched to root me device (some people already told me that this isn't the best method, but it was what I had at the moment):
https://www.youtube.com/watch?v=9SsIH6iauYQ
As i told, i'm a layman and doesn't know the root process, and now i need to update urgently my Android (its currently on the Android version it was when i bought it: 7.1.1). I've found some threads with a similar situation, but i got lost in all the details that i don't know, like "you need to unlock the bootloader", "just flash the TWRP and stuff", but i need a more simple language like "click this, click that". I really need it now, so i'm even thinking about searching for someone trustable to do it or transfering some cash to anyone who helps me, because i don't wanna lose anything important in the process. Anyone that can help me, PLEASE?!
Thanks in advance
Click to expand...
Click to collapse
I am not sure, if I understood it correctly. You need to update your device that's clear but do you need your device still rooted afterwards?
Because if not just update your device, it should be that simple. If you need to root your device afterwards just follow this thread:
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592
Gesendet von meinem CLT-L29 mit Tapatalk
CaerCadarn said:
I am not sure, if I understood it correctly. You need to update your device that's clear but do you need your device still rooted afterwards?
Because if not just update your device, it should be that simple. If you need to root your device afterwards just follow this thread:
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592
Gesendet von meinem CLT-L29 mit Tapatalk
Click to expand...
Click to collapse
Sorry, actually i forgot this detail. I have a root based on SuperSU and i would like to have the Magisk one after i update my Android. What you think is the best way to do it?
Btw, just one question: you said that if i didn't want to keep the root, i could just update my Android, but once i click in the system update option, the update fails, i believe its because of the root right?
djmarkybr said:
Sorry, actually i forgot this detail. I have a root based on SuperSU and i would like to have the Magisk one after i update my Android. What you think is the best way to do it?
Btw, just one question: you said that if i didn't want to keep the root, i could just update my Android, but once i click in the system update option, the update fails, i believe its because of the root right?
Click to expand...
Click to collapse
No, because you have to download the whole update package. Normally the device detects itself if it is rooted/unlocked, so there should be the option to download the whole package. With that the update should not fail.
Gesendet von meinem CLT-L29 mit Tapatalk
CaerCadarn said:
No, because you have to download the whole update package. Normally the device detects itself if it is rooted/unlocked, so there should be the option to download the whole package. With that the update should not fail.
Gesendet von meinem CLT-L29 mit Tapatalk
Click to expand...
Click to collapse
Where i find this whole package option? Can i just download the last version (5.7.1) on OnePlus site?
@ djmarkybr,
follow this self explanatory guide by Funk Wizard, here:https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592
for removing super su you can use uninstaller unsu
a0879 said:
@ djmarkybr,
follow this self explanatory guide by Funk Wizard, here:https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592
for removing super su you can use uninstaller unsu
Click to expand...
Click to collapse
Ok, i read the guide so i'll try to follow it once i get home since i don't have admin access on my work.
Just 2 questions:
1- how do i remove SuperSU? I'm asking cause i've download the file you attached and there is no .exe file or something on it, do i put the files on my phone and then execute the uninstaller by the phone itself? If so, how i do it? Btw, i was taking a look at the SuperSU app and it has this option : "Exchange superuser app - Cleaning to exchange for another superuser app", it works just the same as your uninstall?
2- Even reading FunkWizard's guide, i'm still confused of which order i should do the things. Because i need to:
- Uninstall SuperSU
- Download full OTA on OnePlus website and install it through TWRP
- Install Magisk
is there a best order to do all this? Am i missing something?
Thanks
The attached unsu file is for removing super su by flashing thru twrp ! its not not for pc i.e. no .exe file.
i assume that your bootloader is unlocked and twrp already installed then just flash the unsu zip in twrp > wipe dalvik/cache > reboot, super su gets removed.
You can also go like this (you may need a pc for this):
Since you are on nougat build download the oreo version first.
first download the full oos rom from here on pc : https://forum.xda-developers.com/showthread.php?t=3728665http://
download latest magisk zip from here :https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445http://
download no verity zip to remain decrypted, here :https://forum.xda-developers.com/oneplus-5/how-to/guide-how-to-decrypt-data-partition-t3642144
boot your phone in twrp , wipe everything (first transfer your important data from phone to pc/usb otg), in twrp you can go advanced > format data > yes > done > reboot twrp > now there is nothing in your phone by formatting internal storage (everything). Now while in twrp transfer your already downloaded oos and magisk zips from pc to your phone through the data cable.
Now, flash oos zip > magisk zip > no verity zip > wipe dalvik/cache > reboot > that's it, enjoy your new android version !
a0879 said:
The attached unsu file is for removing super su by flashing thru twrp ! its not not for pc i.e. no .exe file.
i assume that your bootloader is unlocked and twrp already installed then just flash the unsu zip in twrp > wipe dalvik/cache > reboot, super su gets removed.
You can also go like this (you may need a pc for this):
Since you are on nougat build download the oreo version first.
first download the full oos rom from here on pc : https://forum.xda-developers.com/showthread.php?t=3728665http://
download latest magisk zip from here :https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445http://
download no verity zip to remain decrypted, here :https://forum.xda-developers.com/oneplus-5/how-to/guide-how-to-decrypt-data-partition-t3642144
boot your phone in twrp , wipe everything (first transfer your important data from phone to pc/usb otg), in twrp you can go advanced > format data > yes > done > reboot twrp > now there is nothing in your phone by formatting internal storage (everything). Now while in twrp transfer your already downloaded oos and magisk zips from pc to your phone through the data cable.
Now, flash oos zip > magisk zip > no verity zip > wipe dalvik/cache > reboot > that's it, enjoy your new android version !
Click to expand...
Click to collapse
Thank you so much for the help, i'll try this once i get home. Just one more thing: you suggest a Beta Oreo Version or a Stable One? Any version specifically?
djmarkybr said:
Thank you so much for the help, i'll try this once i get home. Just one more thing: you suggest a Beta Oreo Version or a Stable One? Any version specifically?
Click to expand...
Click to collapse
After installing Oreo I don't think that you'll remain on it for a long time.. ha, ha..., Pie is already waiting out there.. :laugh:
go for stable :good:
5.1.3 to 5.1.7
a0879 said:
After installing Oreo I don't think that you'll remain on it for a long time.. ha, ha..., Pie is already waiting out there.. :laugh:
go for stable :good:
5.1.3 to 5.1.7
Click to expand...
Click to collapse
Hey buddy, i followed your steps and now the phone isn't starting totally, it stops on the OnePlus start screen with the white balls around the red one. Should i do the process all again? Can i start TWRP in this situation?
edit: nvm, i try it again and now it works normally But Magisk isn't working, when i try to flash it through TWRP it shows "Updater process ended with ERROR: 1
Error instaling zip file '/sdcard/Magisk....' "
And Android version is still 7.1.1 , so i need to update the Android through the phone itself and then i reapply the root?
edit2: sorry for so many edits in this same reply, let me try to explain the status of all the process right now to see if you can give me some tip:
- Android is on 8.1.0 version right now; Do i need to upload it more?
- Bootloader is unlocked (at least when i go "Enable OEM Unlocking" on Developer options, i cant check this option cause it says that bootloader is already unlocked)
- I can't acess TWRP on reboot now, it seems that i enter on some Oneplus Recovery Mode, not TWRP itself
- Root isn't working
If you need any extra information just ask me
djmarkybr said:
Hey buddy, i followed your steps and now the phone isn't starting totally, it stops on the OnePlus start screen with the white balls around the red one. Should i do the process all again? Can i start TWRP in this situation?
edit: nvm, i try it again and now it works normally But Magisk isn't working, when i try to flash it through TWRP it shows "Updater process ended with ERROR: 1
Error instaling zip file '/sdcard/Magisk....' "
And Android version is still 7.1.1 , so i need to update the Android through the phone itself and then i reapply the root?
edit2: sorry for so many edits in this same reply, let me try to explain the status of all the process right now to see if you can give me some tip:
- Android is on 8.1.0 version right now; Do i need to upload it more?
- Bootloader is unlocked (at least when i go "Enable OEM Unlocking" on Developer options, i cant check this option cause it says that bootloader is already unlocked)
- I can't acess TWRP on reboot now, it seems that i enter on some Oneplus Recovery Mode, not TWRP itself
- Root isn't working
If you need any extra information just ask me
Click to expand...
Click to collapse
I acknowledge your PM, Little tied up at the moment. Please allow me time till tonight to study your case and i shall reply with the best way forward. Don't do anything silly till then
Edit: Please confirm the current status of the device
Rom/OS version
TWRP yes/no
Magisk yes/no
Funk Wizard said:
I acknowledge your PM, Little tied up at the moment. Please allow me time till tonight to study your case and i shall reply with the best way forward. Don't do anything silly till then
Edit: Please confirm the current status of the device
Rom/OS version
TWRP yes/no
Magisk yes/no
Click to expand...
Click to collapse
No problem FunkWizard, take your time and answer when possible, i'll hold my fingers to don't get a worst situation. :angel:
Rom/OS version : Custom ROM(i believe)/8.1.0
TWRP: no; after everything i tried, when i try to acess TWRP now, it doesn't enter on TWRP itself, it shows a different recover screen, like a recovery screen of Oneplus system, just like the picture i attached.
Magisk: no; one of my goals in this entire process was to uninstall SuperSU and install Magisk after all, but when TWRP was working and i tried to install Magisk, i got an error and Magisk didn't install correctly, and since i've uninstalled the SuperSU, i'm without root right now, and i can't even try to install it since TWRP is working right now :crying:
djmarkybr said:
No problem FunkWizard, take your time and answer when possible, i'll hold my fingers to don't get a worst situation. :angel:
Rom/OS version : Custom ROM(i believe)/8.1.0
TWRP: no; after everything i tried, when i try to acess TWRP now, it doesn't enter on TWRP itself, it shows a different recover screen, like a recovery screen of Oneplus system, just like the picture i attached.
Magisk: no; one of my goals in this entire process was to uninstall SuperSU and install Magisk after all, but when TWRP was working and i tried to install Magisk, i got an error and Magisk didn't install correctly, and since i've uninstalled the SuperSU, i'm without root right now, and i can't even try to install it since TWRP is working right now :crying:
Click to expand...
Click to collapse
you lost TWRP sometimes happen but not worry you can easly load again :good:
Mervingio said:
you lost TWRP sometimes happen but not worry you can easly load again :good:
Click to expand...
Click to collapse
Thank God o/ i just need to know how lol :laugh:
djmarkybr said:
No problem FunkWizard, take your time and answer when possible, i'll hold my fingers to don't get a worst situation. :angel:
Rom/OS version : Custom ROM(i believe)/8.1.0
TWRP: no; after everything i tried, when i try to acess TWRP now, it doesn't enter on TWRP itself, it shows a different recover screen, like a recovery screen of Oneplus system, just like the picture i attached.
Magisk: no; one of my goals in this entire process was to uninstall SuperSU and install Magisk after all, but when TWRP was working and i tried to install Magisk, i got an error and Magisk didn't install correctly, and since i've uninstalled the SuperSU, i'm without root right now, and i can't even try to install it since TWRP is working right now :crying:
Click to expand...
Click to collapse
djmarkybr said:
Thank God o/ i just need to know how lol :laugh:
Click to expand...
Click to collapse
If you have oneplus recovery instead of twrp then you can't be on custom ROM, it has to be on oxygenos. Unless I know of what version I would not be able to give you the step by step process.
U can flash twrp easily, simply download the latest Bluspark twrp and flash it via fastboot steps on the unlock device thread in the guides section.
There on you can download and flash the full zips from twrp followed by Magisk.
Sent from my OnePlus6T using XDA Labs
Funk Wizard said:
If you have oneplus recovery instead of twrp then you can't be on custom ROM, it has to be on oxygenos. Unless I know of what version I would not be able to give you the step by step process.
U can flash twrp easily, simply download the latest Bluspark twrp and flash it via fastboot steps on the unlock device thread in the guides section.
There on you can download and flash the full zips from twrp followed by Magisk.
Sent from my OnePlus6T using XDA Labs
Click to expand...
Click to collapse
Sorry Funk, i confused the information, my OxigenOS is 5.1.4
I'll wait for your step by step just to make sure i don't do something wrong
Hi. I download the official update on My 5t rooted. But do not install correctly. "installation failed", it's a twrp problem? I i flash the stock recovery works fine? Thanks.
bramby said:
Hi. I download the official update on My 5t rooted. But do not install correctly. "installation failed", it's a twrp problem? I i flash the stock recovery works fine? Thanks.
Click to expand...
Click to collapse
I don't know, i'm also lost here. Hope someone can help you too
bramby said:
Hi. I download the official update on My 5t rooted. But do not install correctly. "installation failed", it's a twrp problem? I i flash the stock recovery works fine? Thanks.[/QUOTE @djmarkybr
I flashed back stock recovery and all went fine with Pie!
Gesendet von meinem CLT-L29 mit Tapatalk
Click to expand...
Click to collapse
I have Honor 7x BND-L24 (USA version) which is stuck at a screen which says:
ERROR MODE
Attention!
Please update system again
Error!
Func NO : 10 (boot image)
Error NO : 2 (load failed)
Before this screen I had EMUI 5.1 with Android 7.0 installed version BND-L24C567B150CUSTC567D001 and TWRP custom recovery. I wanted to do OTA update so went and installed stock recovery and that somehow damaged my boot image. After factory reset it goes to the screen mentioned above. I can't even turn it off anymore.
I can still boot into fastboot mode, I can still go into recovery by holding both volume buttons and power button but the install always fails and brings me back to the same error screen. Is there any way to fix the boot image error?
Fastboot flashing does not work anymore and gives errors:
Code:
fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (15170 KB)...
OKAY [ 0.395s]
writing 'boot'...
FAILED (remote: Command not allowed)
finished. total time: 0.406s
The bootloader is unlocked:
Code:
fastboot oem get-bootinfo
...
(bootloader) unlocked
OKAY [ 0.008s]
finished. total time: 0.009s
I have also seen in the forums that a dload method (creating a dload folder in the sd card and adding UPDATE.APP file into it) could be used to recover, but it always stops at 5% and fails. Maby I am doing it wrong because the stock ROM has two .zip files (update.zip and update_full_BND-L24_hw_usa.zip) and they both have the UPDATE.APP file in it. If someone could give me a guide on how to propertly use the dload method I would like to try it.
Any additional comments or solutions to try unbricking the phone will be appreciated. Thank you in advance.
P.S. after searching the xda forums it seems that for the dload method I would require a specific rom called the service ROM dload. I have tried searching for it but could only find it for BND-L21, if anyone has a service ROM for BND-L24C567 (USA version) please give me a link, I would like to try the dload method with it.
SOLVED !!!
Thread can be closed. If anyone need the solution on how to fix this issue just send me a message.
Hey how'd you fix it dude? I accidentally broke my boot image and im getting the same error as you did. the only thing i can do is use root shell in stock recovery. I'm trying to figure out how to flash twrp (Ice cream sandwich) to recovery2 but so far no luck.
Can you help me out?
Kr1msonReaper said:
Hey how'd you fix it dude? I accidentally broke my boot image and im getting the same error as you did. the only thing i can do is use root shell in stock recovery. I'm trying to figure out how to flash twrp (Ice cream sandwich) to recovery2 but so far no luck.
Can you help me out?
Click to expand...
Click to collapse
Is your bootloader unlocked and frp unlocked?
if yes then:
Get the stock recovery, boot, system and etc. by going into the OpenKirin website, there is a nice guide there in the support section on how to download and extract the stock recovery and boot images and etc.
Hold down the volume down key and plug in the usb cable. Use fastboot to flash in the stock recovery.
flash them using "fastboot flash" command with the adb and fasboot tool.
if not then:
download Chimera tool.
Pay for 3 day trial (~12 eur)
Do system restore in the application, worked for me. BND-L24 USA version, I now have EMUI 9.1.0 by installing BND-L21 9.1.0.141(C432E2) ROM using the Chimera tool.
Hope this helps.
DBxda7x said:
Is your bootloader unlocked and frp unlocked?
if yes then:
Get the stock recovery, boot, system and etc. by going into the OpenKirin website, there is a nice guide there in the support section on how to download and extract the stock recovery and boot images and etc.
Hold down the volume down key and plug in the usb cable. Use fastboot to flash in the stock recovery.
flash them using "fastboot flash" command with the adb and fasboot tool.
if not then:
download Chimera tool.
Pay for 3 day trial (~12 eur)
Do system restore in the application, worked for me. BND-L24 USA version, I now have EMUI 9.1.0 by installing BND-L21 9.1.0.141(C432E2) ROM using the Chimera tool.
Hope this helps.
Click to expand...
Click to collapse
Thanks for the advice! I repeated the process you provided and so im not bricked, I have all the partitions of ice cream sandwich. The only problem is, the dload method and upgrade from sd card thing stops at 5% and when i use dload, it says image verification failed, because i was trying to upgrade to Nougat. I have the bootloader and stock recovery though. How did you upgrade to pie after doing this?
Also how is pie? maybe I'll install the pie rom for L21 and use english. I actually intall the AL10 once haha. It was horrible. Almost nothing worked and it tried to prevent booting into recovery or bootloader.
Thanks!
-Kr1msonReaper
Kr1msonReaper said:
Thanks for the advice! I repeated the process you provided and so im not bricked, I have all the partitions of ice cream sandwich. The only problem is, the dload method and upgrade from sd card thing stops at 5% and when i use dload, it says image verification failed, because i was trying to upgrade to Nougat. I have the bootloader and stock recovery though. How did you upgrade to pie after doing this?
Also how is pie? maybe I'll install the pie rom for L21 and use english. I actually intall the AL10 once haha. It was horrible. Almost nothing worked and it tried to prevent booting into recovery or bootloader.
Thanks!
-Kr1msonReaper
Click to expand...
Click to collapse
dload method does NOT work on this particular phone. I have tried it multiple times.
Best way is to find the ROM that works for your phone. I have tried a lot of the ROMs for this phone including all of the ones in the OpenKirin website, like the Ressurect, Lineage and etc. those do not work, it just bootloops. But the L21 worked perfectly, only issue is that you need to flash every partition (system, boot, recovery, ram_disk and etc.) and then do a factory reset. If you do not do a factory reset after the installation in will not boot.
Just go to Firmware finder, get EMUI 9.1 ROM, extract all .img files and flash them in using fastboot.
Good luck!
DBxda7x said:
dload method does NOT work on this particular phone. I have tried it multiple times.
Best way is to find the ROM that works for your phone. I have tried a lot of the ROMs for this phone including all of the ones in the OpenKirin website, like the Ressurect, Lineage and etc. those do not work, it just bootloops. But the L21 worked perfectly, only issue is that you need to flash every partition (system, boot, recovery, ram_disk and etc.) and then do a factory reset. If you do not do a factory reset after the installation in will not boot.
Just go to Firmware finder, get EMUI 9.1 ROM, extract all .img files and flash them in using fastboot.
Good luck!
Click to expand...
Click to collapse
Thanks for the advice! I'll try it soon, but as far as i know, from here in ice cream sandwich, it says image verification failed when flashing recovery and other partitions except not system or boot and others for some reason.
Actually I've previously installed RR and Lineage ROMs--maybe you forgot that they must not be flashed in TWRP? Anyway, thanks! Pie sounds like it must be the best option here. I'll go ahead and install it. Oh, and just so you know, the dload method can work on the Honor 7x but you have to flash a patched version of the recovery called BND-RECOVERY-NoCheck.img, except I only have the oreo one so it can't help me.
Thanks!
- Kr1msonReaper
DBxda7x said:
dload method does NOT work on this particular phone. I have tried it multiple times.
Best way is to find the ROM that works for your phone. I have tried a lot of the ROMs for this phone including all of the ones in the OpenKirin website, like the Ressurect, Lineage and etc. those do not work, it just bootloops. But the L21 worked perfectly, only issue is that you need to flash every partition (system, boot, recovery, ram_disk and etc.) and then do a factory reset. If you do not do a factory reset after the installation in will not boot.
Just go to Firmware finder, get EMUI 9.1 ROM, extract all .img files and flash them in using fastboot.
Good luck!
Click to expand...
Click to collapse
Hi, I have a BND-L34 (mate se) and could use some help. I'm not very good with rooting but I followed the directions found here
https://www.desinerd.co.in/how-to-huawei-mate-se-root-twrp-recovery/
which was mentioned from this XDA post about unlocking the bootloader and rooting
https://forum.xda-developers.com/honor-7x/how-to/how-to-unlock-huawei-bootloader-removal-t3780903
So I was able to write the TWRP from the guide on the "recovery_ramdisk" but not the second partition like the guide mentioned. So if try to boot into TWRP I get an error 11 and error 2.
Phone appears to be working otherwise.
I suspect that if I were to ever factory reset the phone I would be in the same situation as you were. Could you tell me how you flashed the EMUI 9 files? Like what the commands were? thanks in advance.
teatimecrumpet said:
Hi, I have a BND-L34 (mate se) and could use some help. I'm not very good with rooting but I followed the directions found here
https://www.desinerd.co.in/how-to-huawei-mate-se-root-twrp-recovery/
which was mentioned from this XDA post about unlocking the bootloader and rooting
https://forum.xda-developers.com/honor-7x/how-to/how-to-unlock-huawei-bootloader-removal-t3780903
So I was able to write the TWRP from the guide on the "recovery_ramdisk" but not the second partition like the guide mentioned. So if try to boot into TWRP I get an error 11 and error 2.
Phone appears to be working otherwise.
I suspect that if I were to ever factory reset the phone I would be in the same situation as you were. Could you tell me how you flashed the EMUI 9 files? Like what the commands were? thanks in advance.
Click to expand...
Click to collapse
@teatimecrumpet we have the same phones . . . .
Ok so, first, are you on Oreo or something lower? If you're on oreo I have the proper TWRP img for the ramdisk partition. If you flashed your TWRP to recovery but not recovery_ramdisk, I recommend reflashing the stock recovery and then flashing mine to ramdisk. But you shouldn't worry, you can't even factory reset anyway, if you've overwritten your recovery. So if you say your phone's fine now it should continue to work. I have not yet upgraded to Pie like @DBxda7x suggested, but I will soon.
In any case, here's the TWRP you must flash to the ramdisk.
-Kr1msonReaper
OreoTWRP: https://www.dropbox.com/s/ztzh7hejp3j9fuz/BND_twrp_true_Oreo.img?dl=0
Kr1msonReaper said:
@teatimecrumpet we have the same phones . . . .
Ok so, first, are you on Oreo or something lower? If you're on oreo I have the proper TWRP img for the ramdisk partition. If you flashed your TWRP to recovery but not recovery_ramdisk, I recommend reflashing the stock recovery and then flashing mine to ramdisk. But you shouldn't worry, you can't even factory reset anyway, if you've overwritten your recovery. So if you say your phone's fine now it should continue to work. I have not yet upgraded to Pie like @DBxda7x suggested, but I will soon.
In any case, here's the TWRP you must flash to the ramdisk.
-Kr1msonReaper
OreoTWRP: https://www.dropbox.com/s/ztzh7hejp3j9fuz/BND_twrp_true_Oreo.img?dl=0
Click to expand...
Click to collapse
Hey Krimson, thanks for the reply. It's been awhile since I had that error...it's a bit hazy. But I'm on oreo now and am trying to either downgrade back to nougat or try to flash oreo again. Reason being the phone was working fine but now my GPS doesn't really work and I can't pick up any satellites and I kind of need google maps to work.
I tried to use hisuite to upgrade to the newest firmware and downgrade to nougat but no luck it just boots to TWRP.
When I first rooted I know I flashed recovery and recovery2 (but recovery2 turned out to be erecovery on oreo...I remember it was a pain trying to figure out.)
I can't seem to find a simple guide to follow and like I said I'm not very good with this. Do you think you could give me the commands to either flash what you have or do the pie update? I'm totally fine going back to stock and then trying to root Nougat again.
Thanks!
teatimecrumpet said:
Hey Krimson, thanks for the reply. It's been awhile since I had that error...it's a bit hazy. But I'm on oreo now and am trying to either downgrade back to nougat or try to flash oreo again. Reason being the phone was working fine but now my GPS doesn't really work and I can't pick up any satellites and I kind of need google maps to work.
I tried to use hisuite to upgrade to the newest firmware and downgrade to nougat but no luck it just boots to TWRP.
When I first rooted I know I flashed recovery and recovery2 (but recovery2 turned out to be erecovery on oreo...I remember it was a pain trying to figure out.)
I can't seem to find a simple guide to follow and like I said I'm not very good with this. Do you think you could give me the commands to either flash what you have or do the pie update? I'm totally fine going back to stock and then trying to root Nougat again.
Thanks!
Click to expand...
Click to collapse
Hey, I know it's been a while, it is pretty hazy. I actually got into a situation where i bricked my phone from trying to downgrade from Pie to Nougat directly. Don't EVER do that. If you're on Oreo now, I know that there are some guides on how to use HWOTA to downgrade to nougat pretty easily. Here's the link:
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
This method will not flash any custom recovery or any custom boots.
Caution: I don't take any responsibility. Proceed with your own risk and resilience in mind
Prerequisites: Oxygen OS 11 (tested with 11, issues reported with 10) and a PC with working adb and fastboot commands.
Method:
Download lineage-18.1-20210606-recovery-instantnoodlep.img or never version to your pc
Download Magisk-v23.0.apk or newer and rename it as Magisk-v23.0.zip
Enable OEM unlock in the Developer options under device Settings, if present.
Boot in to bootloader
adb reboot bootloader
Or press "Volume Up + Volume Down + Power" when the device boots
Unlock the bootloader (Caution: this will factory reset your phone)
fastboot oem unlock
Boot in to bootloader again
Boot in to lineage recovery temporarily (not flashing)
fastboot boot lineage-18.1-20210606-recovery-instantnoodlep.img
You will be booted in to lineage recovery, install Magisk-v23.0.zip now
Enable ADB
Apply update
Apply from ADB
in your pc: adb sideload Magisk-v23.0.zip
Reboot and voilà.. you are done.
Cheers!!
Worked like a charm, except for some confusion in the recovery menu choices. After enabling ADB in recovery, I had to choose "Apply update." I was then given a choice to "Apply from ADB." After enabling that option, "adb sideload Magisk-v23.0.zip" gave me an error message about some kind of mismatch and asking me if I wanted to install anyway. I took a deep breath, clicked "Yes," and all went well. Needless to say, all others proceed at their own risks, but my IN2025 running OS 11.0.7.7.IN11AA is now happily rooted with Magisk V23.0.
Wow! This is just awesome!! What will be the downside of a rooted device though? Will I still get OTA update?
melmarPH said:
Wow! This is just awesome!! What will be the downside of a rooted device though? Will I still get OTA update?
Click to expand...
Click to collapse
Yes, you will get OTA updates. If you want to accept them and still retain root, you'll need to uninstall Magisk and "Restore the boot images" so the phone will accept the OTA update. You then install the update from System Update in Settings, BUT DO NOT REBOOT!!!! Navigate back to the Magisk Manager app and click on "Install" for Magisk. You'll want the option that says, "Install to Inactive Slot (After OTA.)" After that installation finishes, you can safely reboot the OS update installed and rooted.
Abort Retry Fail? said:
Yes, you will get OTA updates. If you want to accept them and still retain root, you'll need to uninstall Magisk and "Restore the boot images" so the phone will accept the OTA update. You then install the update from System Update in Settings, BUT DO NOT REBOOT!!!! Navigate back to the Magisk Manager app and click on "Install" for Magisk. You'll want the option that says, "Install to Inactive Slot (After OTA.)" After that installation finishes, you can safely reboot the OS update installed and rooted.
Click to expand...
Click to collapse
Sweet. Thanks a lot for the guide mate.
mahendral said:
This method will not flash any custom recovery or any custom boots.
Caution: I don't take any responsibility. Proceed with your own risk and resilience in mind
Download lineage-18.1-20210606-recovery-instantnoodlep.img or never version to your pc
Download Magisk-v23.0.apk or newer and rename it as Magisk-v23.0.zip
Enable OEM unlock in the Developer options under device Settings, if present.
Boot in to bootloader
adb reboot bootloader
Or press "Volume Up + Volume Down + Power" when the device boots
Unlock the bootloader (Caution: this will factory reset your phone)
fastboot oem unlock
Boot in to bootloader again
Boot in to lineage recovery temporarily (not flashing)
fastboot boot lineage-18.1-20210606-recovery-instantnoodlep.img
You will be booted in to lineage recovery, install Magisk-v23.0.zip now
Enable ADB
Select ADB sideload
in your pc: adb sideload Magisk-v23.0.zip
Reboot and voilà.. you are done.
Cheers!!
Click to expand...
Click to collapse
On step 5 I dont see the option for fastboot oem unlock anywhere. Can a nob get a noob friendlier guide? As im lost thanks!
thanks guys worked on my 11.0.7.7.IN11AA
Thanks for the guide. It was very easy and fast to do it.
n08 said:
On step 5 I dont see the option for fastboot oem unlock anywhere. Can a nob get a noob friendlier guide? As im lost thanks!
Click to expand...
Click to collapse
Here I have assumed that the adb and the fastboot are available in your PC before begin. Step 5 should be executed from your PC (Linux or Windows) with the phone is connected through USB.
@mahendral
Super guide!
Got my OP8 Pro yesterday, less than one hour after unboxing, it was rooted
Why so long?
Because i had to update to OOS 11 (OOS 10 out of the box).
If you try your method with OOS 10, you get stuck at this step:
Boot in to lineage recovery temporarily
==> Stuck at Fastboot logo
Hence i updated to OOS 11 OB and it worked like a charm!
Thanks a lot
bc1977 said:
@mahendral
Super guide!
Got my OP8 Pro yesterday, less than one hour after unboxing, it was rooted
Why so long?
Because i had to update to OOS 11 (OOS 10 out of the box).
If you try your method with OOS 10, you get stuck at this step:
Boot in to lineage recovery temporarily
==> Stuck at Fastboot logo
Hence i updated to OOS 11 OB and it worked like a charm!
Thanks a lot
Click to expand...
Click to collapse
Thanks for the info bc1977, I'll add that as a prerequisite
Abort Retry Fail? said:
Worked like a charm, except for some confusion in the recovery menu choices. After enabling ADB in recovery, I had to choose "Apply update." I was then given a choice to "Apply from ADB." After enabling that option, "adb sideload Magisk-v23.0.zip" gave me an error message about some kind of mismatch and asking me if I wanted to install anyway. I took a deep breath, clicked "Yes," and all went well. Needless to say, all others proceed at their own risks, but my IN2025 running OS 11.0.7.7.IN11AA is now happily rooted with Magisk V23.0.
Click to expand...
Click to collapse
Amended the steps to sideload with exact steps as you pointed out. Thanks
Mahendral,
Many many thanks!!!!!
The title says it all. This is the easiest way.
I'm on 11.0.7.7.IN11AA.
Worked perfectly.
And yes, it is the easiest!
Hi, will this work on normal OP8 version IN2015? thanks.
EDIT: so this guide is for both unlocking bootloader and having root?
The lineage-18.1-20210606-recovery-instantnoodlep.img is no longer available though. Help
Wow! This was so easy and so quick. Thank you SOO MUCH!
arfhel09 said:
The lineage-18.1-20210606-recovery-instantnoodlep.img is no longer available though. Help
Click to expand...
Click to collapse
I just googled the file name and found a mirror with new images. Google is your friend, as they say.
LineageOS Downloads
download.lineageos.org
How can I root latest version (11.0.8.8) with magisk?
Sneakdovi said:
How can I root latest version (11.0.8.8) with magisk?
Click to expand...
Click to collapse
same thing, since there is nothing specified for the OS version ONLY OOS 11.
im going to flash this to 11.0.8.8, if u want to wait or u can try it and report back before I do ^^
Edit-------------
I successfully rooted my phone ver 11.0.8.8 using this method with latest lineage recovery
STALKER18 said:
same thing, since there is nothing specified for the OS version ONLY OOS 11.
im going to flash this to 11.0.8.8, if u want to wait or u can try it and report back before I do ^^
Edit-------------
I successfully rooted my phone ver 11.0.8.8 using this method with latest lineage recovery
Click to expand...
Click to collapse
Same