Hi.. I have recently updated my honor 7x to emui 8 based on android oreo. However when I try to flash TWRP I get an error notification as 'partition length get error'. Can someone help how to install TWRP on honor 7x after update to oreo.
Ypk2020 said:
Hi.. I have recently updated my honor 7x to emui 8 based on android oreo. However when I try to flash TWRP I get an error notification as 'partition length get error'. Can someone help how to install TWRP on honor 7x after update to oreo.
Click to expand...
Click to collapse
the partions changed in oreo to flash new recovery you have to type ( fastboot flash recovery_ramdisk ) and it will work
Not working
dcraffam said:
the partions changed in oreo to flash new recovery you have to type ( fastboot flash recovery_ramdisk ) and it will work
Click to expand...
Click to collapse
Thanks for the reply. I tried adding ramdisk but doesnt work..
Ypk2020 said:
Thanks for the reply. I tried adding ramdisk but doesnt work..
Click to expand...
Click to collapse
You must do it exactly as I put it the new partion is (recovery_ramdisk) it won't work without the underscore
Not working
dcraffam said:
You must do it exactly as I put it the new partion is (recovery_ramdisk) it won't work without the underscore
Click to expand...
Click to collapse
Yess I did exactly the same.. This time I didn't even get any etror message. It said okay.. Still my phone boots normal with stock recovery..
Ypk2020 said:
Yess I did exactly the same.. This time I didn't even get any etror message. It said okay.. Still my phone boots normal with stock recovery..
Click to expand...
Click to collapse
The trick is to hold vol up and vol down plus power button if your usb is connected. Wait till it sais rebooting. If no USB connected just vol up and power.
Having same problem
allrockedout said:
The trick is to hold vol up and vol down plus power button if your usb is connected. Wait till it sais rebooting. If no USB connected just vol up and power.
Click to expand...
Click to collapse
I tried but it didn't worked
Kakshi Naresh said:
I tried but it didn't worked
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-7x/development/oreo-twrp-complete-backup-t3764500
Kakshi Naresh said:
I tried but it didn't worked
Click to expand...
Click to collapse
please add screenshots of fastboot flashing the recovery, maybe picture tells wore detail than you notice.
same problem sir....
plz help me
Can it comfortable with BND-AL10,with running official oreo
---------- Post added at 08:14 AM ---------- Previous post was at 08:02 AM ----------
Can it comfortable with BND-AL10,with running official oreo
Kakshi Naresh said:
I tried but it didn't worked
Click to expand...
Click to collapse
Kakshi Naresh said:
mrmazak said:
So you are all ok?
Click to expand...
Click to collapse
Dude I flashed twrp
But it is stucked what to do
Click to expand...
Click to collapse
stucked at logo screen?
from that page only use / try these two
imagemount.img
twrp_complete.img
but there is twrp from p10 lite that works better--- it has working encryption
abd today someone found that twrp for p20 lite also works better.
mrmazak said:
stucked at logo screen?
from that page only use / try these two
imagemount.img
twrp_complete.img
but there is twrp from p10 lite that works better--- it has working encryption
abd today someone found that twrp for p20 lite also works better.
Click to expand...
Click to collapse
Where can I find that
Kakshi Naresh said:
Where can I find that
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p20-lite/development/recovery-testing-t3783587
Not able to boot into TWRP
I have tried a dozen image files until now...
I am using honor 7x...
My software is bricked... I am trying to flash TWRP... On pc, there are no errors... But in phone, stock recovery comes up
Yeah recovery_ramdisk is working for me but can anyone tell what is the new partition name for erecovery or recovery2 earlier??
Ypk2020 said:
Yess I did exactly the same.. This time I didn't even get any etror message. It said okay.. Still my phone boots normal with stock recovery..
Click to expand...
Click to collapse
I'm facing the same problem
- Boot phone normally
- Connect USB Cable
- Enable USB Debugging
(Make sure adb is installed, and you pressed "Yes" when device asked for allowing adb on your PC)
- type in cmd: adb reboot recovery
This should boot your device into TWRP. Works for me.
SaranGoda said:
I have tried a dozen image files until now...
I am using honor 7x...
My software is bricked... I am trying to flash TWRP... On pc, there are no errors... But in phone, stock recovery comes up
Click to expand...
Click to collapse
The same thing happens in my case (mine is BND Al 10) When flashing Twrp it say 'okay' but later, it boots normally I to the system or shows that 'your phone is unlocked' page
Related
I was on cm 13 something and flashed cm 14.1 everything was working ok but i didnt flashed gapps zip.
so i tried to go into recovery and there was no recovery anymore...
then i reset cm 14.1 that i can start from a fresh rom and since then i cant start my phone
i dont have a recovery i can get in but i can get into fastboot mode
hope someone is able to help me and could tell me what to do / try to install a working system again
Inlacrimas said:
I was on cm 13 something and flashed cm 14.1 everything was working ok but i didnt flashed gapps zip.
so i tried to go into recovery and there was no recovery anymore...
then i reset cm 14.1 that i can start from a fresh rom and since then i cant start my phone
i dont have a recovery i can get in but i can get into fastboot mode
hope someone is able to help me and could tell me what to do / try to install a working system again
Click to expand...
Click to collapse
Use this toolkit on a pc to fix your recovery, forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Hope it helps.
JoshDaWhite said:
Use this toolkit on a pc to fix your recovery, forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Hope it helps.
Click to expand...
Click to collapse
i am not that familir with all these kinds of stuff
what would be the steps i had to do ?
Inlacrimas said:
i am not that familir with all these kinds of stuff
what would be the steps i had to do ?
Click to expand...
Click to collapse
Download the toolkit and unzip it. Launch the bat file and the find the option to flash twrp recovery.
JoshDaWhite said:
Download the toolkit and unzip it. Launch the bat file and the find the option to flash twrp recovery.
Click to expand...
Click to collapse
it doesnt find my device
when i press 7 it tells me error device not found
Inlacrimas said:
it doesnt find my device
when i press 7 it tells me error device not found
Click to expand...
Click to collapse
Enter fastboot mode. Connect device to pc. You need to download the attached zip. Unzip it, open the folder until you see a bunch of files.Click the back button, select the folder, press Shift and click the right side of the mouse, and select open command window here.use the command fastboot devices and report back.
This is the zip I told you about.
JoshDaWhite said:
This is the zip I told you about.
Click to expand...
Click to collapse
nothing happend to the phone stays in fastboot
Inlacrimas said:
nothing happend to the phone stays in fastboot
Click to expand...
Click to collapse
Yes but the command returned any results?
JoshDaWhite said:
Yes but the command returned any results?
Click to expand...
Click to collapse
yes 9771bc7e fastboot like in the linked picture
Inlacrimas said:
yes 9771bc7e fastboot like in the linked picture
Click to expand...
Click to collapse
Unfortunately the picture is too small to read from it. It is great! It means your device can receive fastboot commands! I can guide you how to install stock Oxygen os 3.2.7. That also means you lose your data from internal storage. Do you want Oxygen os 3.2.7?
JoshDaWhite said:
Unfortunately the picture is too small to read from it. It is great! It means your device can receive fastboot commands! I can guide you how to install stock Oxygen os 3.2.7. That also means you lose your data from internal storage. Do you want Oxygen os 3.2.7?
Click to expand...
Click to collapse
i want any system that works currently since i cant get into recovery ^^
if i can go back into recovery i should be able to manage stuff on my own or i just flash rom xyz afterwards then thats no big deal
you can click on the magnifying glass to make it bigger :good:
JoshDaWhite said:
Unfortunately the picture is too small to read from it. It is great! It means your device can receive fastboot commands! I can guide you how to install stock Oxygen os 3.2.7. That also means you lose your data from internal storage. Do you want Oxygen os 3.2.7?
Click to expand...
Click to collapse
i tried arround and managed to flash twpr with the programm but nothing has changed cant boot into recovery
Inlacrimas said:
i tried arround and managed to flash twpr with the programm but nothing has changed cant boot into recovery
Click to expand...
Click to collapse
Flash the stock recovery then sideload Oxygen os.
JoshDaWhite said:
Flash the stock recovery then sideload Oxygen os.
Click to expand...
Click to collapse
tried flashing stock recovery phone powers of or rebbots or something
how can i sideload theoxygen os ?
Think i just helped myself with
https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
works again thanks for your help
Inlacrimas said:
tried flashing stock recovery phone powers of or rebbots or something
how can i sideload theoxygen os ?
Think i just helped myself with
https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
works again thanks for your help
Click to expand...
Click to collapse
Glad you fixed it.
JoshDaWhite said:
Glad you fixed it.
Click to expand...
Click to collapse
Really appreciate all the time you spent helping here :good:
Inlacrimas said:
I was on cm 13 something and flashed cm 14.1 everything was working ok but i didnt flashed gapps zip.
so i tried to go into recovery and there was no recovery anymore...
then i reset cm 14.1 that i can start from a fresh rom and since then i cant start my phone
i dont have a recovery i can get in but i can get into fastboot mode
hope someone is able to help me and could tell me what to do / try to install a working system again
Click to expand...
Click to collapse
Fyi, if u decide to go back to 14.1, you will need to flash modified twrp http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Then recovery will stay intact
Hi anyone can help me. Before i restart my device it automatically boots in bootloader mode. I manage to fix it via fastboot command "fastboot oem fb_mode_clear"
But after that my problem now is when i restart my device it boots on twrp recovery. When i reboot system it also goes back to twrp mode. What is this problem? Any fix for this? Thanks everyone.
Kdx10 said:
Hi anyone can help me. Before i restart my device it automatically boots in bootloader mode. I manage to fix it via fastboot command "fastboot oem fb_mode_clear"
But after that my problem now is when i restart my device it boots on twrp recovery. When i reboot system it also goes back to twrp mode. What is this problem? Any fix for this? Thanks everyone.
Click to expand...
Click to collapse
try hold power & -volume when logo appear hold again to buttons for 10 sec then check
hamad94 said:
try hold power & -volume when logo appear hold again to buttons for 10 sec then check
Click to expand...
Click to collapse
Tried it but it wot fix. Anyways thanks for reaching up bro
What version of TWRP are you using?
If you are on the latest one, try the version before.
https://www.androidfilehost.com/?w=files&flid=126925
Jimi Mack said:
What version of TWRP are you using?
If you are on the latest one, try the version before.
https://www.androidfilehost.com/?w=files&flid=126925
Click to expand...
Click to collapse
I have the latest v3.1.1-0
How can i flash the old one?
Edit. Tried it sir but no success :angel:
Kdx10 said:
I have the latest v3.1.1-0
How can i flash the old one?
Edit. Tried it sir but no success :angel:
Click to expand...
Click to collapse
To flash in TWRP you need to flash it as an image, the option is in there. It will allow you to flash an older or newer version when with in TWRP.
Jimi Mack said:
To flash in TWRP you need to flash it as an image, the option is in there. It will allow you to flash an older or newer version when with in TWRP.
Click to expand...
Click to collapse
Yes sir tried it but still not solved. Now i lost my hope in recovering my device :crying:
Kdx10 said:
Yes sir tried it but still not solved. Now i lost my hope in recovering my device :crying:
Click to expand...
Click to collapse
Just to double check, you have a rom installed right, you did not accidentally wipe that?
Jimi Mack said:
Just to double check, you have a rom installed right, you did not accidentally wipe that?
Click to expand...
Click to collapse
Yes sir. I have 4 different roms in my sd card. The aex, xperience, crdroid and aokp. Im in aex rom before everything is smooth no error when restarting. Until then i decided to try the aokp rom 05/21 nightly build, and after that i flash also a modified boot logo to get rid of the unlock bootloader warning iflash it using fastboot commamd but when i power it on and set up the aokp rom everything goes well but then i need to restart my phone then the problem now is appearing. It directly boot in twrp recovery.
I was on nougat on my L21_hw_eu before i tried to upgrade manualy to oreo. i tried the twrp and terminal method and my phone started upgading. It failed at 72% saying "update verification failed". I lost my stock rom and bricked my phone.
Then i manualy flashed different Update.app images and was able to unbrick my phone .
I tried lineage OS and stock oreo.
Problems are:
1: I cant factory reset my phone using stock recovery it fails at 24%
2: FingerPrint Sensor won't work except for gestures (in Stock oreo. works in LineageOs)
3: Themes dont work
4: Flash light don't work
4: CAMERA is not responding. in both roms
in lineageOs everything works perfectly except Camera.
Please provide me details for what am i doing wrong..
iu.khan53 said:
I was on nougat on my L21_hw_eu before i tried to upgrade manualy to oreo. i tried the twrp and terminal method and my phone started upgading. It failed at 72% saying "update verification failed". I lost my stock rom and bricked my phone.
Then i manualy flashed different Update.app images and was able to unbrick my phone .
I tried lineage OS and stock oreo.
Problems are:
1: I cant factory reset my phone using stock recovery it fails at 24%
2: FingerPrint Sensor won't work except for gestures (in Stock oreo. works in LineageOs)
3: Themes dont work
4: Flash light don't work
4: CAMERA is not responding. in both roms
in lineageOs everything works perfectly except Camera.
Please provide me details for what am i doing wrong..
Click to expand...
Click to collapse
If you only have extracted images flashed from update.app, then you do not have the full rom installed.
You should run either hurupdater of HWOTA again to get full emui8 installed.
mrmazak said:
If you only have extracted images flashed from update.app, then you do not have the full rom installed.
You should run either hurupdater of HWOTA again to get full emui8 installed.
Click to expand...
Click to collapse
I suspected that too...
Now my TWRP hangs at initial screen. i m using p20lite.img twrp
other TWRP works but they dont have adb enabled
is there a way i could flash through fastboot?
iu.khan53 said:
I suspected that too...
Now my TWRP hangs at initial screen. i m using p20lite.img twrp
other TWRP works but they dont have adb enabled
is there a way i could flash through fastboot?
Click to expand...
Click to collapse
no,
dont adb though.
mrmazak said:
no,
dont adb though.
Click to expand...
Click to collapse
HuRUpdater keeps loading on initial screen and
HWota Fails after installing no check recovery.
screenshot attached..
iu.khan53 said:
HuRUpdater keeps loading on initial screen and
HWota Fails after installing no check recovery.
screenshot attached..
Click to expand...
Click to collapse
Is that v3.1 . I pulled that version because of error 2 messages.
Check the guide and download again. File name should be. ...
NVM, I just put the download link here.
https://www.androidfilehost.com/?fid=746163614322268008
mrmazak said:
Is that v3.1 . I pulled that version because of error 2 messages.
Check the guide and download again. File name should be. ...
NVM, I just put the download link here.
https://www.androidfilehost.com/?fid=746163614322268008
Click to expand...
Click to collapse
Hwota was successful with the newer version but after rebooting update failed at 0%
iu.khan53 said:
Hwota was successful with the newer version but after rebooting update failed at 0%
Click to expand...
Click to collapse
Please screenshot the twrp screen before reboot.
mrmazak said:
Please screenshot the twrp screen before reboot.
Click to expand...
Click to collapse
i flashed different images from UPDATE.APP manually through fastboot and twrp.. I was succesfull and fingerprint was working but camera was still not working so i stupidity flashed DTS.IMG, ODM.img, and ERECOVERY_KERNEL.img through twrp and when i rebooted. there was completely black screen and nothing was working. fastboot only recognizes device and i m able to send commands . i wanted to flash other dts,odm and ERECOVERY_KERNEL.img through fastboot but it says "remote command not allowed". there is absolutely no life in phone. i think it is hard bricked. is there a way to get device back?? or else i m completely F****D.
iu.khan53 said:
i flashed different images from UPDATE.APP manually through fastboot and twrp.. I was succesfull and fingerprint was working but camera was still not working so i stupidity flashed DTS.IMG, ODM.img, and ERECOVERY_KERNEL.img through twrp and when i rebooted. there was completely black screen and nothing was working. fastboot only recognizes device and i m able to send commands . i wanted to flash other dts,odm and ERECOVERY_KERNEL.img through fastboot but it says "remote command not allowed". there is absolutely no life in phone. i think it is hard bricked. is there a way to get device back?? or else i m completely F****D.
Click to expand...
Click to collapse
You are well past anything I. Have dealt with.
mrmazak said:
You are well past anything I. Have dealt with.
Click to expand...
Click to collapse
well i will try to repair it with sigma device. I heard it can flash anything on to device through fastboot. I will try that otherwise i have to give it to huawei service centre and pray they accept to repair it.
iu.khan53 said:
well i will try to repair it with sigma device. I heard it can flash anything on to device through fastboot. I will try that otherwise i have to give it to huawei service centre and pray they accept to repair it.
Click to expand...
Click to collapse
can not explain it, but I have seen that camra not working problem, and the blank black screenfixed by flashing the vendor partiton. The bad part about that is, i do not think it flashes with fastboot.
mrmazak said:
can not explain it, but I have seen that camra not working problem, and the blank black screenfixed by flashing the vendor partiton. The bad part about that is, i do not think it flashes with fastboot.
Click to expand...
Click to collapse
i took the phone to local repair shop they flashed naugat on it and were unsuccesfull(naugat cant be flashed on oreo) but i am again at fastboot with situation similar to this thread.
https://forum.xda-developers.com/mate-9/help/please-help-bootloop-error-func-14-1-t3724685
iu.khan53 said:
i took the phone to local repair shop they flashed naugat on it and were unsuccesfull(naugat cant be flashed on oreo) but i am again at fastboot with situation similar to this thread.
https://forum.xda-developers.com/mate-9/help/please-help-bootloop-error-func-14-1-t3724685
Click to expand...
Click to collapse
As far as I know (which is not that far). You need three images to be correct for recovery to load on oreo based device.
1. recovery_ramdisk.img
2. kernel.img
3. recovery_vbmeta
try to flash those in fastboot first. and see if they complete without error.
then if they do flash, try to boot into recovery. (try with stock first-- can try TWRP after if this works)
mrmazak said:
As far as I know (which is not that far). You need three images to be correct for recovery to load on oreo based device.
1. recovery_ramdisk.img
2. kernel.img
3. recovery_vbmeta
try to flash those in fastboot first. and see if they complete without error.
then if they do flash, try to boot into recovery. (try with stock first-- can try TWRP after if this works)
Click to expand...
Click to collapse
i cant flash ramdisk images. ithink i m on naugat now because i am able to flash succesfully recovery.img and boot.img in recovery and boot partitions. but cant flash ramdisk and kernel.
and what is iom3 image. error do i need to flash something for that?
and also hifi image error when upgrading through dload method
iu.khan53 said:
i cant flash ramdisk images. ithink i m on naugat now because i am able to flash succesfully recovery.img and boot.img in recovery and boot partitions. but cant flash ramdisk and kernel.
and what is iom3 image. error do i need to flash something for that?
and also hifi image error when upgrading through dload method
Click to expand...
Click to collapse
oh, well let me get together some nougat suggestions
mrmazak said:
oh, well let me get together some nougat suggestions
Click to expand...
Click to collapse
i have sent phone to the service center. waiting for their response now. They told me if they were unable to repair the phone then i will get a new one. lets hope for the best.
iu.khan53 said:
i have sent phone to the service center. waiting for their response now. They told me if they were unable to repair the phone then i will get a new one. lets hope for the best.
Click to expand...
Click to collapse
That sounds good
mrmazak said:
That sounds good
Click to expand...
Click to collapse
Received call today they were unable to repair it. They said they will get me a new one as soon as new stock arrives.
mrmazak said:
That sounds good
Click to expand...
Click to collapse
Recieved new phone today. Works like a charm. but again stuck on naugat. i will wait for official upgrade this time
Edit:
Got upgrade to oreo today. Love the new UI.
Hi guys, sorry for my bad english...
I have installed an update in my eml-l09c432, as always using hurupdater 0.4. The recovery told me that this firmware may relock the bootloader. Anyway i continued. But, ad the end of the installation, a red text has appared: Failed to mount \vendor and \odm. So i rebooted the twrp again (reflashing it) and i tried to install an older sistem. But it locked with a text: Unable to mount \data. I tried to wipe all partitions (data too) but without success... Now I really don't know what to do...
Please help me
Thank you
EnricoOrlando said:
Hi guys, sorry for my bad english...
I have installed an update in my eml-l09c432, as always using hurupdater 0.4. The recovery told me that this firmware may relock the bootloader. Anyway i continued. But, ad the end of the installation, a red text has appared: Failed to mount \vendor and \odm. So i rebooted the twrp again (reflashing it) and i tried to install an older sistem. But it locked with a text: Unable to mount \data. I tried to wipe all partitions (data too) but without success... Now I really don't know what to do...
Please help me
Thank you
Click to expand...
Click to collapse
Try to download software using erecovery
madoxx77 said:
Try to download software using erecovery
Click to expand...
Click to collapse
It Is impossible. The erecovery does not exist because the os Is not installed
EnricoOrlando said:
It Is impossible. The erecovery does not exist because the os Is not installed
Click to expand...
Click to collapse
Can you access Twrp?
madoxx77 said:
Can you access Twrp?
Click to expand...
Click to collapse
No more... Now the display is full black. There is not any recovery. But if i connect it to computer, adb recognize it as a fastboot device. I tried to flash kernel, cust, system, recovery_ramdisk. There aren't errors, but it is still black
EnricoOrlando said:
Hi guys, sorry for my bad english...
I have installed an update in my eml-l09c432, as always using hurupdater 0.4. The recovery told me that this firmware may relock the bootloader. Anyway i continued.
Click to expand...
Click to collapse
On which were you and which did you install?
EnricoOrlando said:
But, ad the end of the installation, a red text has appared: Failed to mount \vendor and \odm.
Click to expand...
Click to collapse
Maybe not a problem.
EnricoOrlando said:
So i rebooted the twrp again (reflashing it) and i tried to install an older sistem.
Click to expand...
Click to collapse
Here the downgrade problems are coming...
EnricoOrlando said:
But it locked with a text: Unable to mount \data.
Click to expand...
Click to collapse
Not a problem.
EnricoOrlando said:
I tried to wipe all partitions (data too) but without success...
Click to expand...
Click to collapse
In twrp, i guess : that move was dumb...
EnricoOrlando said:
Now I really don't know what to do...
Please help me
Thank you
Click to expand...
Click to collapse
---------- Post added at 16:33 ---------- Previous post was at 16:31 ----------
EnricoOrlando said:
No more... Know the display is full black. There is not any recovery. But if i connect it to computer, adb recognize it as a fastboot device. I tried to flash kernel, cust, system, recovery_ramdisk. There aren't errors, but it is still black
Click to expand...
Click to collapse
Try hisuite restore option.
oslo83 said:
On which were you and which did you install?
Maybe not a problem.
Here the downgrade problems are coming...
Not a problem.
In twrp, i guess : that move was dumb...
---------- Post added at 16:33 ---------- Previous post was at 16:31 ----------
Try hisuite restore option.
Click to expand...
Click to collapse
I was installing eml-l09c432b160 firmware in twrp using HuRupdater v0.4
I tried to use HiSuite, but it said me that the phone isn't compatible
have you already tried the e-recovery method? Or do you have there also a black screen?
S2kT68m said:
have you already tried the e-recovery method? Or do you have there also a black screen?
Click to expand...
Click to collapse
I Always have black screen... Also fastboot isn't working. Or Better, It works for the computer, but the screen Is off. And now the led Is Red and Is flashing
Download eml-l09 firmware at androidhost .ru /search.html (sorry I can't post links), put the dload folder in an ext formatted usb, delete the eml-l29 folder and then boot your phone with the volume buttons both pressed, let me know if it works
hydrosh said:
Download eml-l09 firmware at androidhost .ru /search.html (sorry I can't post links), put the dload folder in an ext formatted usb, delete the eml-l29 folder and then boot your phone with the volume buttons both pressed, let me know if it works
Click to expand...
Click to collapse
I took my to assistance.. now i have to wait for two weeks. Anyway, thank you very much
Im using official TWRP but the touchscreen does not work, how can i get around this?
Try to hold power button for 9-10 seconds
hogze94 said:
Im using official TWRP but the touchscreen does not work, how can i get around this?
Click to expand...
Click to collapse
same here, did you get any solution?
Same to me... help!
lupomarano said:
Same to me... help!
Click to expand...
Click to collapse
what screen do you have?
Sprut_name said:
what screen do you have?
Click to expand...
Click to collapse
I have a MI A2 lite,
reflash twrp .. i had the same issue yesterday ..
Connect the phone to the computer (fastboot mode)
Launch the command line and go to the folder where you put all the prerequisites (cd Folder_name)
Boot the recovery image: fastboot boot twrp-daisy-3.3.0-0-offain.img
You will see the recovery on your phone, prompting to enter the password. Choose "Cancel"
Click to expand...
Click to collapse
solved said:
reflash twrp .. i had the same issue yesterday ..
Click to expand...
Click to collapse
tried it over and over again. still having this issue.
TWRP loads up showing me the "Keep System Read only?" page. Touchscreen wont work.
using twrp-installer-3.3.0-dees_troy-daisy
flash a stock rom , then use offain 3.3.0-0 twrp
I have the same problem, this should help https://forum.xda-developers.com/mi-a2/how-to/guide-flashing-roms-twrp-black-screen-t3913052
Thats because u dont have OS, You need to flash OS with MiFlash, unlock bootloader and flash TWRP