Hello Guys, You were Curious To Root Your New Redmi 1s and probably solve all heating problems
Cautions - I'm not Responsible for anything its your choice and work (Nothing will go wrong by the way, I've tried it myself :fingers-crossed: )
Hit Thanks if this has helped you!!!
Lets Start with it
Requisites :-
1 - The Phone Redmi 1s [Indian versions supported]
2 - Some basic knowledge about recovery
3 -Download Attachment
4 - Patience
The PROCESS
1- Download the attachment "update.zip" and place it in the INTERNAL storage of Redmi 1s
2 - Download the SuperSU zip and place it in EXTERNAL sdcard
3 - Go to updater app -> options menu -> reboot to recovery
4 - In the recovery menu choose english (volume buttons will help )
5 - Apply Update to system (something like that), confirm it using volume buttons and power button
6 - Reboot System
7 - After the boot completes go to the updater app again and reboot to recovery (ref step 3)
8 - Well you have Philz recovery loaded within no time and if you have used this recovery before in any other phone then its easy
8.1 - If you are doing it for first time, Use power button and volume button for selection and navigation - install zip ->Choose zip from external_sd (some times sdcard1) -> navigate down and choose the zip and say yes if prompted (All using power button(selection) and volume buttons(navigation)
9 - After flashing completes -> reboot system -> say yes for fixing recovery
10 - done!!! enjoy your rooted redmi 1s
Warrning - you will lose stock recovery, your apps and data wont be hurt
UPDATE VIA OTA SUPPORTED!!!
Go to Next POST for UNROOT
Stock Recovery here --> http://forum.xda-developers.com/redmi-1s/general/stock-recovery-how-to-flash-mi-recovery-t2917905
To cool your device, download no frills cpu control app from play store and set max frequency to 1.19ghz and close it... Now your redmi 1s won't heat up and still it would be lagless
A custom rom based on stock coming soon
Unrooting And OTA updates
Unrooting - - IMPORTANT TO OTA UPDATE
Use the superSU app's in-built settings to unroot it
OTA updates
Your OTA updates wont break if u root it, And you dont Have to Unroot to update!!
To do OTA update, open updater app and download the update and update normally, the update will go good in 15 minutes!, This means Updater app is compatible with this custom recovery, nothing to fear!!
Dear Dev
Thanks for the tutorial. I'm hereby conforming that this tutorial is working great for Xiaomi Redmi 1S,Indian version.
Try it and I'm sure in no way it will harm anything as it didn't to mine.
Thanks & Regards
BOND
Sent from my LG-F240L using Tapatalk
What version of MIUI have you tried this? Also, what is the effect of receiving the OTA update while still have root?
Thanks for this!
Update: Confirmed working, MIUI 36/
I have posted an easy method providing the link below
http://forum.xda-developers.com/showthread.php?t=2881416
azimdotnet said:
I have posted an easy method providing the link below
http://forum.xda-developers.com/showthread.php?t=2881416
Click to expand...
Click to collapse
That's not a easy way... It's the same method, I think Philz recovery is more useful and easy to flash zips and for utilities, cwm recovery is tooo basic, and I've taken some time to explain it for newbies so it's lengthy
Pavan l said:
Unrooting - - IMPORTANT TO OTA UPDATE
Use the superSU app's in-built settings to unroot it
OTA updates
Your OTA updates wont break if u root it, but u need to unroot before updating
To do OTA update, open updater app and download the update and dont flash it
Copy the OTA update zip from downloaded_rom folder in internal memory to External memory and reboot to recovery and flash it as you flashed superSU zip in rooting process
Click to expand...
Click to collapse
What do you mean by "Your OTA updates won't break" does it mean I will still be notified if there is an update?
esrom02 said:
What do you mean by "Your OTA updates won't break" does it mean I will still be notified if there is an update?
Click to expand...
Click to collapse
Yep you will get Update notification and the updater app will download it, but as the recovery is not miui so it wont flash it, just manually flash it after unrooting it
Works like a charm!
Works as told on Redmi 1s (Indian version)
Thank you very much bro
Really appreciate it.
super works great!
successfully rooted my device!
dont work
dont work for me:silly::laugh::highfive::good::fingers-crossed::cyclops:
Update works without removing root
Hi guys,
This is my first time posting on xda forums. I just wanted to share what happened today.
I rooted my redmi 1s according to the post with philz recovery. However today i recieved the update (MIUI v45) and without realizing that the update was already downloaded i clicked on update and got scared because it says here that it wont be able to update because the stock recovery is missing. But what happened was that it booted into philz recovery and updated through that. It took longer than usual around 15 mins I would say but It got updated.
It gave me option to retain the root and the custom recovery to which I said yes. And it worked. I still have my root permssions, all the root apps and phils recovery.
indian rom
i flashed PA IN MY PHONE can i get the indian rom back ??? i cant find indian miui rom anywhere
cwa255 said:
dont work for me:silly::laugh::highfive::good::fingers-crossed::cyclops:
Click to expand...
Click to collapse
What went wrong?
Thanks a lot for this tutorial..
Thanks a ton, works like a charm!!!
I did as explained and got it working with ease!
I also installed no frill cpu app and tinkered with the settings some!
Will report on the changes in heating or battery life due to this underclocking!
Can't undervolting help?
Just one question, why does not the native security pop-up come instead of superSU one?
anurag_xpert said:
Thanks a ton, works like a charm!!!
I did as explained and got it working with ease!
I also installed no frill cpu app and tinkered with the settings some!
Will report on the changes in heating or battery life due to this underclocking!
Can't undervolting help?
Just one question, why does not the native security pop-up come instead of superSU one?
Click to expand...
Click to collapse
Because MIUI superuser is a little buggy and unresponsive sometimes and hence superSU app will do the same work and MIUI will collect private data but superSU app will never do that so I think This SuperSU app is way better than native MIUI
cwa255 said:
dont work for me:silly::laugh::highfive::good::fingers-crossed::cyclops:
Click to expand...
Click to collapse
Tell me What went wrong or what trouble u are facing I'll resolve it here
Related
This is DEVELOPER EDITION Unicom China but full functional.
update: [System] ● Can not set to solve the problem of dual SIM ringtones. ● solve problems background application background display abnormal. ● solve the problem of the upgrade package can not be deleted. ● New super power saving features. ● Optimized status bar background. ● optimize the system stability and performance. [Desktop] ● Added a button to lock the desktop screen. ● Optimized Desktop default font size. [Camera] ● solve the problem of preservation of black and white photographs from your camera probability of occurrence. ● optimize camera stability. [ theme ] ● download themes unable to solve the problem can not be properly displayed in the status bar, calls and other applications.
link
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=42
mirror
https://mega.co.nz/#!wt9HXLBY!9vaVXVOmRfVTeETXc1LXXLVzzLdV589WbjM7Ir4HBzc
You must be on b706 stock ROM
How to INSTALL: extract dload folder and copy to SD card.....go to system update---local update....click and wait to install.
OR
copy extracted dload folder to SD card and install from original stock recovery
GAPPS here
https://mega.co.nz/#!F9d00ZIL!d2nA5KP_5L_AMHzxls2uEEkjXtgPGBljdAzF6kdyv9E
flash gapps via twrp
mlsvcbbn said:
link
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=42
copy to SD card install from original recovery ....you must be on b706 stock rom
Click to expand...
Click to collapse
Thanks
Translated to English
https://translate.google.com/transl...hp?id=hwdownload&mod=detail&mid=42&edit-text=
Downloading..... 18 hours left
.....
2 days left now
Maybe next year?
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=42
Is this legit? Anyone tried to install the ROM. It says EMUI 3.0.
Thank you.
MarkTulagan said:
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=42
Is this legit? Anyone tried to install the ROM. It says EMUI 3.0.
Thank you.
Click to expand...
Click to collapse
Yes it is legit since it's from Huawei's website. It's a developer build I think.
mirror https://mega.co.nz/#!wt9HXLBY!9vaVXVOmRfVTeETXc1LXXLVzzLdV589WbjM7Ir4HBzc
mlsvcbbn said:
mirror https://mega.co.nz/#!wt9HXLBY!9vaVXV...89WbjM7Ir4HBzc
Click to expand...
Click to collapse
Cannot decrypt metadata without key. ???
is this the international one ?
dose it have google apps ?
bagufix said:
Cannot decrypt metadata without key. ???
Click to expand...
Click to collapse
try here https://mega.co.nz/#!wt9HXLBY!9vaVXVOmRfVTeETXc1LXXLVzzLdV589WbjM7Ir4HBzc
Can someone repack it ? to be able to flash it through TWRP
if you have somehow already installed this ROM, please confirm if it is an official international release and if there are no Chinese words/letters on the ROM. Thank you.
MarkTulagan said:
if you have somehow already installed this ROM, please confirm if it is an official international release and if there are no Chinese words/letters on the ROM. Thank you.
Click to expand...
Click to collapse
yep, it 's Chinese rom, not international, not gapps, chinese app, but 3g worked
Install it. All ok except for google acount and root. Google acount i activated downloading from vmall google play services.
Unfortunally SUPERSU cant update the binary. I need help to root the device. I installed superuser.zip fille but now luck.
If somewone can guide me trough will be much appreciated.
Thank you.
Why you didn't tried twrp? Is work like a charm [emoji7]
Sent from my iPhone using Tapatalk
shecky said:
Why you didn't tried twrp? Is work like a charm [emoji7]
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Of course i installed twrp. But after root when i open supersu it cant update. And im stuck.
The only pack that is working with twrp is the repack made by "oxalis".
Any ideas?
Strange. It's working perfect with twrp and supersu.
Sent from my iPad using Tapatalk
shecky said:
Strange. It's working perfect with twrp and supersu.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
I installed update.app with stock recovery. With the 3 buttons method. I was on the repack by oxalis.
After that i installed twrp 2.8.0.1. Before reboot it asked me if i want to root the phone. I cheked yes. After that the phone rebooted supersu whas installed. After i opened supersu it asked me to update from play or twrp. I chose google play and after that supersu got stuck. From twrp got stuck too. Cant update the binary.
If i did something different from you tell me please. Im willing to reinstall from scrach.
Thank you.
I can not change themes
savudragosh2 said:
I installed update.app with stock recovery. With the 3 buttons method. I was on the repack by oxalis.
After that i installed twrp 2.8.0.1. Before reboot it asked me if i want to root the phone. I cheked yes. After that the phone rebooted supersu whas installed. After i opened supersu it asked me to update from play or twrp. I chose google play and after that supersu got stuck. From twrp got stuck too. Cant update the binary.
If i did something different from you tell me please. Im willing to reinstall from scrach.
Thank you.
Click to expand...
Click to collapse
Try to uninstall the updates on supersu and then see if it installs the binary properly.
Alashe said:
I can not change themes
Click to expand...
Click to collapse
first time choose Default (magazine) theme .....then you can change .
Current firmware: Android 5.0.2, Build LRX22G, Cyanogen OS version 12.0-YNG1TAS0W0
OTA: http://builds.cyngn.com/cyanogen-os...deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
Fastboot flashable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
Boot Debuggable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-boot-debuggable.img
Use OTA for manually update from any official KitKat build; don't use fastboot flashable images on existing devices with KitKat bootloader - it will brick the device!
How to unbrick: http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040 (Credit goes to @tirta.agung)
OTA downloaded.... Now going with flashboot...
Need Some Help
Deleted
anyone flashed it yet???
Sent from my AO5510 using Tapatalk
Flashed it..initial boot will take a long time
blackyz said:
OTA downloaded.... Now going with flashboot...
Click to expand...
Click to collapse
I tried fastboot method now my phone is not booting
anyone done it successfully? my DL is halfway so I need procedural help.
Phone not booting
sharan.nyn said:
I tried fastboot method now my phone is not booting
Click to expand...
Click to collapse
I flashed with fastboot process successful but my phone not booting, nothing happening. i don't know what to do now no logo just dead.
I flashed it with TWRP.
Awsm CM12S.
Super smooth !
mralam92 said:
I flashed with fastboot process successful but my phone not booting, nothing happening. i don't know what to do now no logo just dead.
Click to expand...
Click to collapse
Same here bro!
now following this
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
sharan.nyn said:
Same here bro!
now following this
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Click to expand...
Click to collapse
service centre help or not?
Posted cm12
Just installed the zip version of cm12 on yu. Could not wait for the official ota update. Updated zip using cwm recovery which I had installed while the phone was running on the cm11 kitkat 4.4.4 version.
I understand that since this is just a system update there is no need to change or revert back to the original recovery.
(just a doubt- is it necessary to revert back to original 4.4.4 system stock recovery in case we get the OTA or the OTA will take care of any Custom recovery and will install iteslf?)
Initial boot will take a long time due to the Android Runtime (ART) virtual machine which is the improvisation over the Dalvik Cache. So please be patient for all the 122 apps to get registered in by ART. I had tried the ART while on cm11 4.4.4 (despite of system warning that it might lead to crashes etc... ), even then it took a very long time......
Working absolutely fine. Initial experience is awesome. Will be observing it now for some time. Most other features are similar to the cm11. no more 3g detection errors. Got to explore more....
My first posting in XDA.
I owe a lot to this community from which I have taken a lot. I hope I will be able to give back even little that I have got to help others. :good::good:
By zip version i mean the version that can be installed using the phone recovery with out the need of a computer to push the system (i.e. the flashable version). I am not aware what the debuggable version means.
mralam92 said:
service centre help or not?
Click to expand...
Click to collapse
Service center said they will pickup the device in 7-8 days
please tell me difference between OTA,Fastboot flashable image and Boot Debuggable image.And which one should I download to install.?
Titokhan said:
OTA: http://builds.cyngn.com/cyanogen-os...deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
Fastboot flashable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
Boot Debuggable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-boot-debuggable.img
Click to expand...
Click to collapse
Is the Android version 5.0.x or 5.1?
Has anyone encountered any bugs at all?
To flash through recovery, do I need the OTA version?
CM 12 update
guys plzzz help me as lollipop is out for yu...can i install ?? i have rooted my yu but i m still on stock rom i.e cm 11 and i have cwm ,can i flash the cm12 zip file using cwm ..
dont flash thru fastboot all who flashed it thru are having hard bricked devices
weshall said:
guys plzzz help me as lollipop is out for yu...can i install ?? i have rooted my yu but i m still on stock rom i.e cm 11 and i have cwm ,can i flash the cm12 zip file using cwm ..
Click to expand...
Click to collapse
YES YOU CAN JUST FOLLOW THIS STEPS
1. Download official CM12s Ota(1st zip in the link).
2. Place the downloaded zip file in the ‘download’ folder on phone’s internal storage.
3. Boot Yureka into Stock Cyanogen recovery - To do so, power off the phone. Then press Volume Up + Volume Down and Power button simultaneously,Onec you boot into recovery do data/ factory reset.
4. Select ‘Apply Update’ > ‘choose from internal storage’ > /0 > Download > and select “cm-12.0-YNG1TAS0W0-tomato-signed.zip” file. The ROM will be flashed and you should be seeing the Android Bot
5. Once installation is over, go to main page and ‘wipe cache partition’
6. Then select Reboot system now
That’s it! Wait for a while as the device boots for the first time with all new and fresh Cyanogen OS 12.
IF you dont get anyhting just revert me back ,or pm will help you.:laugh:
Titokhan said:
Current firmware: Android 5.0.2, Build LRX22G, Cyanogen OS version 12.0-YNG1TAS0W0
OTA: http://builds.cyngn.com/cyanogen-os...deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
Fastboot flashable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
Boot Debuggable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-boot-debuggable.img
Use OTA for manually update from any KitKat build; don't use fastboot flashable images on existing devices with KitKat bootloader - it'll brick the device!
Click to expand...
Click to collapse
It just got updated if you flash it on kitkat bootloader, the device will get bricked
Many users have got their device bricked, the warning was too late I flashed it today at 1:50 AM
weshall said:
guys plzzz help me as lollipop is out for yu...can i install ?? i have rooted my yu but i m still on stock rom i.e cm 11 and i have cwm ,can i flash the cm12 zip file using cwm ..
Click to expand...
Click to collapse
Hi, You can very well install the .....signed.zip using the CWM recovery as I did.
1. Install the .....signed.zip file and not the ....flashable.zip or the ....bootable.zip files. Only the .....SIGNED.ZIP file either on your phone memory or sdcard
2. Reboot into the recovery mode either by using the advanced reboot option or by pressing the volumeup+down button and power buttons simultaneously and releasing them once you see the Yu logo and phone vibrates.
2. Use the Factory reset command first and then wipe the Cache
3. Navigate to the Install zip and chose the .....SIGNED.zip from either your phone memory or the SD Card as CWM has the option to chose the zip file. and swipe to install it.
4. After successful installation navigate to reboot and swipe to allow the system to restart.
5. Intial boot takes a very long time saying Android is updating. This is because Lollipop uses Android Runtime (ART) by default and not Dalvik Cache as a virtual machine for all apps. So please be patient till all the 122 or so apks are updated by ART. Takes around 10-15minutes.
6. The usual fist time boot stuff.... and then...
7. Enjoy. CM12 it is sweet.
---------- Post added at 09:58 AM ---------- Previous post was at 09:43 AM ----------
id74em8 said:
Is the Android version 5.0.x or 5.1?
Has anyone encountered any bugs at all?
To flash through recovery, do I need the OTA version?
Click to expand...
Click to collapse
It is android version 5.0.2
To flash through recovery (either CWM or TWRP) use the .....SIGNED.ZIP i.e. the first file in the list and NOT the .flashable.zip or the last one. Only the first one.
I installed the zip through CWM
The only bug I noticed was when you add the Powersaver option tile in the Notification drawer, when in the power saving mode, a notification showing the power save mode got invoked. When I used the same option after rebooting I am not getting it now..
Also all of a sudden a red boundary started to appear at the edges of the screen. So I though I had opted for the screen refresh notification in the Developer options but I had not. Still i could see the red rectangle when the screen refreshed. I had to reboot the system. Now fine.
INSTALL OFFICIAL CM12 TO YU YUREKA
Yu Yureka has got the official Cyanogenmod 12S sealed and signed by Google which is being rolled out today! Few users has already got the update and we have captured the OTA link , that means now we don't have to wait for the OTA update. We can also install them manually and can enjoy the sweeter taste of Lollipop.
As it is officially confirmed, you may check the forum
_____________________________________________________________________________
Requirements :-
1.) Data Plan to download approx 680 mb OTA file.
2.) Charged Yu Yureka device.
3.) Stock recovery, download here
4.) Rashr to flash stock recovery.
5.) Backup all your data.
6.) Patience, it will require 30 min to install the update
Steps to Install the OTA update :-
1.) Flash the stock recovery first from Rashr or Flashify.
2.) Download the OTA zip file and place it in your storage.
3.) Power off your device, Now press Volume Up + Volume Down + Power button simultaneously.
4.) Cyanogenmod Official Recovery will be opened.
5.) Select 2nd option i.e. Apply Update
6.) Select the storage, you have copied the OTA zip file
7.) Select the OTA Zip file, and open it, it will start to install the update.
8.) Wait for the completing installation, you have to reboot it manually .
9.) First bootup will take time, so keep patience.
10.) Voila You have successfully updated your Yu Yureka to CM12S.
NOTE: We are not responsible to any damage to your device. Do at your own risk!
data's
my data's are deleted or not.
during this update ?
Yes, it will
Panneer Selvam said:
my data's are deleted or not.
during this update ?
Click to expand...
Click to collapse
Your Phone storage will be formatted! And your Internal Storage will not, but make the backup of that too
Hit Thanks if help
You havn't send the link of the files, Can you send the link of how to download those recovery too, if i does that, it mean by phone will be rooted na, Sorry i am new bee i don't know much about rooting
JoelXD said:
You havn't send the link of the files, Can you send the link of how to download those recovery too, if i does that, it mean by phone will be rooted na, Sorry i am new bee i don't know much about rooting
Click to expand...
Click to collapse
DONT worry YOU can flash the above file by stock recovery also,
if you dont understand anything revert me back.
D_Rising_Pheonix said:
DONT worry YOU can flash the above file by stock recovery also,
if you dont understand anything revert me back.
Click to expand...
Click to collapse
Hmmm i did and it got installed successfully, but when my factory restore it from new cm12, its again doing all that from begining, but only difference this time, its installing 122 app, and before it was 156 app. Is it normall, Will it take so long to factory reset in Lolipop ??
Will it solve the problem if i would have rooted my device, i just on the recovery mode of Yureka, by pressing volume key and power button , than apply update and update the ROM. and now everytime i factory reset, its doing the whole process again again.
Android is Upgrading ...
Please help
Thanks in Advance !
I'm on custom ROM crdroid and cwm recovery,
So I just need to flash stock recovery and then flash the ota?
On Custom Rom Can i flash this...
I am on custom rom, should i flash in official recovery and flash the update? or what should i do??
Is upgrading to cm12 worth it?
Link to download stock 64-bit cyanogen recovery for CM12.0-YNG1TASOWO
Please provide me Link to download stock 64-bit cyanogen recovery for CM12.0-YNG1TASOWO.Please also tell me how to flash it.l,Currently I m using CWM/TWRP recovery.
I am on cm12s official update not able to install music app of Sony walkman of z3. After installing and on play it says can't play the song. Help
hey, im new to Android, after moving on from my Iphone 4 to my the new M9, i start wondering.
i got my phone unlock booter threw the devHTC,
got it S-ff with the great app (that i forgot the name) which i payed for it.
installed SuperSu update to give roots privilages, and also BusyBox Free.
thoese are my problems:
1. installed SB game hacker, and its says after i gave it root privilages that i dont gave it, or i dont have root acces.
the thing is that with GameKiller i do get root access...
2. trying to apply patch with the Lucky Patcher sometimes i get root unstable window error that asked me to update my
SuperSu even thew its update to last vesrion.
3. again with Lucky patcher (which does get root privilages for sometimes) - i try to install threw the toolBox -> patch to android -> Signature Verificcation Status Always True , and after it reboot i go back to it and it says its not patched. like the patch failed.
i tryed to clear the core.jar and the service.jar but it doesn't help, it doesn't patch it.
4. i got the new System Update 1.36.709.3 and when i press Install now, it enter the teemmod (the developer mode which i can wipe, install and everything) and does nothing. after reboot to system it ask me again if i want to install, and again go to this dev mode (which is needed for installing supersu to the system).
5. same as befor, apps like clean master doesn't get superuser privilages and cannot disable auto start apps even thew superSu do allow it. also, CPU manager in Battery Life app always get off after a while, or after a reboot.
i hope i could get help cuz im really lost in finding a way to fix all of this.
Please help?
Hello,
You need to fix your root situation.
- Open supersu, and do a complete uninstall.
- Download the latest super su flashable from chainfires website (Google it)
- flash it in recovery mode
- boot and install supersu free from play store
- report back here
Also, if you flashed a custom recovery you cannot OTA update the stock Android, that update requires stock recovery to install.
TwinAdk said:
Hello,
You need to fix your root situation.
- Open supersu, and do a complete uninstall.
- Download the latest super su flashable from chainfires website (Google it)
- flash it in recovery mode
- boot and install supersu free from play store
- report back here
Also, if you flashed a custom recovery you cannot OTA update the stock Android, that update requires stock recovery to install.
Click to expand...
Click to collapse
OK, by flash u mean to go to recovery mode and install the su u told me right?
waltobc6 said:
OK, by flash u mean to go to recovery mode and install the su u told me right?
Click to expand...
Click to collapse
Basic terminology:
- Recovery / recovery mode: Instead of booting into the Android OS, you can boot into the "recovery OS" (located on a partition of the phone storage, just like the android OS is located on its own partition). The OS used for the recovery partition can be either stock or custom - popular custom choices are TWRP (TeamWin Recovery Project) or CWM (Clockwork Mod) - TWRP is the best choice for the M9 - http://forum.xda-developers.com/one-m9/orig-development/recovery-twrp-touch-recovery-t3066720
- To flash something: To install something (always a zip-file, never apk files) while the phone is in recovery mode
TL;DR: Yes. :good:
Kind Regards
TwinAdk
TwinAdk said:
Hello,
You need to fix your root situation.
- Open supersu, and do a complete uninstall.
- Download the latest super su flashable from chainfires website (Google it)
- flash it in recovery mode
- boot and install supersu free from play store
- report back here
Also, if you flashed a custom recovery you cannot OTA update the stock Android, that update requires stock recovery to install.
Click to expand...
Click to collapse
TwinAdk said:
Basic terminology:
- Recovery / recovery mode: Instead of booting into the Android OS, you can boot into the "recovery OS" (located on a partition of the phone storage, just like the android OS is located on its own partition). The OS used for the recovery partition can be either stock or custom - popular custom choices are TWRP (TeamWin Recovery Project) or CWM (Clockwork Mod) - TWRP is the best choice for the M9 - http://forum.xda-developers.com/one-m9/orig-development/recovery-twrp-touch-recovery-t3066720
- To flash something: To install something (always a zip-file, never apk files) while the phone is in recovery mode
TL;DR: Yes. :good:
Kind Regards
TwinAdk
Click to expand...
Click to collapse
Okay I got 3 options - reinstall which is not what I need
And 2 more which are cleanup for switching userroot app
And a full cleanup for preparing uproot.
Which one should I pick.
Also I used last time Supersu 2.49, and now from the site is gave me I downloaded 2.46
I understand 2.49 is beta - so which one to pick?
2.49. Place it on the SD card of the phone before unroot. Choose complete unroot in the su app.
TwinAdk said:
2.49. Place it on the SD card of the phone before unroot. Choose complete unroot in the su app.
Click to expand...
Click to collapse
Not having SD - and install it from the internal storage of the phone can **** it up?
I press. Uninstall and it get stuck on it. I let it run for more then 40 min
And it didn't finish
Complete unroot just got the phone stuck?? If so, please walk me through the life of your phone from unboxing, eg what have you done with the device in terms of unlocking it, flashing stuff etc. Also, what carrier and soff status...
TwinAdk said:
Complete unroot just got the phone stuck?? If so, please walk me through the life of your phone from unboxing, eg what have you done with the device in terms of unlocking it, flashing stuff etc. Also, what carrier and soff status...
Click to expand...
Click to collapse
I mean got stuck on the please wait- I was able to switch app.
Also after trying few time to uninstall it - it worked.
I flashed the super 2.49 opened google store and unlocked the app.
The CPU manager in doctor battery still turn off after a while.
Also auto start app disable in clean master still says it don't have room access even
I have it again.
And I tried to install in lucky patcher the signal true - and after long "please wait"
And a auto robot it says it not patched.
What to do ?
Do you see a prompt to allow root access to the apps asking for it?
Can you post a screenshot of the Super su app with allowed and disallowed applications listed?
Are you on stock ROM with custom recovery?
TwinAdk said:
Do you see a prompt to allow root access to the apps asking for it?
Can you post a screenshot of the Super su app with allowed and disallowed applications listed?
Are you on stock ROM with custom recovery?
Click to expand...
Click to collapse
I do get the approve window, also it shows the permission granted
In the super all allowed listed.
I didn't change any stock rom. I'm on the default of HTC m9 system.
And I'm still-off, and unlocked
That is really wired... Either we are missing something obvious, or your system is really messed up..
TwinAdk said:
That is really wired... Either we are missing something obvious, or your system is really messed up..
Click to expand...
Click to collapse
How can I do a full reset, cuz factor reset still leave the Supersu broke
Look in the forum for it
TwinAdk said:
Look in the forum for it
Click to expand...
Click to collapse
Please oh: I'm into it for like week without any good sucsses
Guide , help please?
Find your device/carrier RUU and start over, if you went through all the steps to get s off, you should have made a back up that you could start over with in recovery. If not search for for the RUU or original system file in the m9 forum For your SPECIFIC device.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
waltobc6 said:
How can I do a full reset, cuz factor reset still leave the Supersu broke
Click to expand...
Click to collapse
Try entering ##786# on your dialer key paid
I bought my phone in Bolivia, and at the box it had Chinese so I think it's a new movie9 from Asia. How can I check my SPECIFIC so I can download what's needed
Hey guys, so this is my problem:
I've bought a OnePlus 5T some days after its release. When i searched for a tutorial teaching how to root the device (i don't know the root process deeply), there were just a few videos at that time. This was the video i watched to root me device (some people already told me that this isn't the best method, but it was what I had at the moment):
https://www.youtube.com/watch?v=9SsIH6iauYQ
As i told, i'm a layman and doesn't know the root process, and now i need to update urgently my Android (its currently on the Android version it was when i bought it: 7.1.1). I've found some threads with a similar situation, but i got lost in all the details that i don't know, like "you need to unlock the bootloader", "just flash the TWRP and stuff", but i need a more simple language like "click this, click that". I really need it now, so i'm even thinking about searching for someone trustable to do it or transfering some cash to anyone who helps me, because i don't wanna lose anything important in the process. Anyone that can help me, PLEASE?!
Thanks in advance
djmarkybr said:
Hey guys, so this is my problem:
I've bought a OnePlus 5T some days after its release. When i searched for a tutorial teaching how to root the device (i don't know the root process deeply), there were just a few videos at that time. This was the video i watched to root me device (some people already told me that this isn't the best method, but it was what I had at the moment):
https://www.youtube.com/watch?v=9SsIH6iauYQ
As i told, i'm a layman and doesn't know the root process, and now i need to update urgently my Android (its currently on the Android version it was when i bought it: 7.1.1). I've found some threads with a similar situation, but i got lost in all the details that i don't know, like "you need to unlock the bootloader", "just flash the TWRP and stuff", but i need a more simple language like "click this, click that". I really need it now, so i'm even thinking about searching for someone trustable to do it or transfering some cash to anyone who helps me, because i don't wanna lose anything important in the process. Anyone that can help me, PLEASE?!
Thanks in advance
Click to expand...
Click to collapse
I am not sure, if I understood it correctly. You need to update your device that's clear but do you need your device still rooted afterwards?
Because if not just update your device, it should be that simple. If you need to root your device afterwards just follow this thread:
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592
Gesendet von meinem CLT-L29 mit Tapatalk
CaerCadarn said:
I am not sure, if I understood it correctly. You need to update your device that's clear but do you need your device still rooted afterwards?
Because if not just update your device, it should be that simple. If you need to root your device afterwards just follow this thread:
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592
Gesendet von meinem CLT-L29 mit Tapatalk
Click to expand...
Click to collapse
Sorry, actually i forgot this detail. I have a root based on SuperSU and i would like to have the Magisk one after i update my Android. What you think is the best way to do it?
Btw, just one question: you said that if i didn't want to keep the root, i could just update my Android, but once i click in the system update option, the update fails, i believe its because of the root right?
djmarkybr said:
Sorry, actually i forgot this detail. I have a root based on SuperSU and i would like to have the Magisk one after i update my Android. What you think is the best way to do it?
Btw, just one question: you said that if i didn't want to keep the root, i could just update my Android, but once i click in the system update option, the update fails, i believe its because of the root right?
Click to expand...
Click to collapse
No, because you have to download the whole update package. Normally the device detects itself if it is rooted/unlocked, so there should be the option to download the whole package. With that the update should not fail.
Gesendet von meinem CLT-L29 mit Tapatalk
CaerCadarn said:
No, because you have to download the whole update package. Normally the device detects itself if it is rooted/unlocked, so there should be the option to download the whole package. With that the update should not fail.
Gesendet von meinem CLT-L29 mit Tapatalk
Click to expand...
Click to collapse
Where i find this whole package option? Can i just download the last version (5.7.1) on OnePlus site?
@ djmarkybr,
follow this self explanatory guide by Funk Wizard, here:https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592
for removing super su you can use uninstaller unsu
a0879 said:
@ djmarkybr,
follow this self explanatory guide by Funk Wizard, here:https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unlock-bootloader-flash-twrp-t3704592
for removing super su you can use uninstaller unsu
Click to expand...
Click to collapse
Ok, i read the guide so i'll try to follow it once i get home since i don't have admin access on my work.
Just 2 questions:
1- how do i remove SuperSU? I'm asking cause i've download the file you attached and there is no .exe file or something on it, do i put the files on my phone and then execute the uninstaller by the phone itself? If so, how i do it? Btw, i was taking a look at the SuperSU app and it has this option : "Exchange superuser app - Cleaning to exchange for another superuser app", it works just the same as your uninstall?
2- Even reading FunkWizard's guide, i'm still confused of which order i should do the things. Because i need to:
- Uninstall SuperSU
- Download full OTA on OnePlus website and install it through TWRP
- Install Magisk
is there a best order to do all this? Am i missing something?
Thanks
The attached unsu file is for removing super su by flashing thru twrp ! its not not for pc i.e. no .exe file.
i assume that your bootloader is unlocked and twrp already installed then just flash the unsu zip in twrp > wipe dalvik/cache > reboot, super su gets removed.
You can also go like this (you may need a pc for this):
Since you are on nougat build download the oreo version first.
first download the full oos rom from here on pc : https://forum.xda-developers.com/showthread.php?t=3728665http://
download latest magisk zip from here :https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445http://
download no verity zip to remain decrypted, here :https://forum.xda-developers.com/oneplus-5/how-to/guide-how-to-decrypt-data-partition-t3642144
boot your phone in twrp , wipe everything (first transfer your important data from phone to pc/usb otg), in twrp you can go advanced > format data > yes > done > reboot twrp > now there is nothing in your phone by formatting internal storage (everything). Now while in twrp transfer your already downloaded oos and magisk zips from pc to your phone through the data cable.
Now, flash oos zip > magisk zip > no verity zip > wipe dalvik/cache > reboot > that's it, enjoy your new android version !
a0879 said:
The attached unsu file is for removing super su by flashing thru twrp ! its not not for pc i.e. no .exe file.
i assume that your bootloader is unlocked and twrp already installed then just flash the unsu zip in twrp > wipe dalvik/cache > reboot, super su gets removed.
You can also go like this (you may need a pc for this):
Since you are on nougat build download the oreo version first.
first download the full oos rom from here on pc : https://forum.xda-developers.com/showthread.php?t=3728665http://
download latest magisk zip from here :https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445http://
download no verity zip to remain decrypted, here :https://forum.xda-developers.com/oneplus-5/how-to/guide-how-to-decrypt-data-partition-t3642144
boot your phone in twrp , wipe everything (first transfer your important data from phone to pc/usb otg), in twrp you can go advanced > format data > yes > done > reboot twrp > now there is nothing in your phone by formatting internal storage (everything). Now while in twrp transfer your already downloaded oos and magisk zips from pc to your phone through the data cable.
Now, flash oos zip > magisk zip > no verity zip > wipe dalvik/cache > reboot > that's it, enjoy your new android version !
Click to expand...
Click to collapse
Thank you so much for the help, i'll try this once i get home. Just one more thing: you suggest a Beta Oreo Version or a Stable One? Any version specifically?
djmarkybr said:
Thank you so much for the help, i'll try this once i get home. Just one more thing: you suggest a Beta Oreo Version or a Stable One? Any version specifically?
Click to expand...
Click to collapse
After installing Oreo I don't think that you'll remain on it for a long time.. ha, ha..., Pie is already waiting out there.. :laugh:
go for stable :good:
5.1.3 to 5.1.7
a0879 said:
After installing Oreo I don't think that you'll remain on it for a long time.. ha, ha..., Pie is already waiting out there.. :laugh:
go for stable :good:
5.1.3 to 5.1.7
Click to expand...
Click to collapse
Hey buddy, i followed your steps and now the phone isn't starting totally, it stops on the OnePlus start screen with the white balls around the red one. Should i do the process all again? Can i start TWRP in this situation?
edit: nvm, i try it again and now it works normally But Magisk isn't working, when i try to flash it through TWRP it shows "Updater process ended with ERROR: 1
Error instaling zip file '/sdcard/Magisk....' "
And Android version is still 7.1.1 , so i need to update the Android through the phone itself and then i reapply the root?
edit2: sorry for so many edits in this same reply, let me try to explain the status of all the process right now to see if you can give me some tip:
- Android is on 8.1.0 version right now; Do i need to upload it more?
- Bootloader is unlocked (at least when i go "Enable OEM Unlocking" on Developer options, i cant check this option cause it says that bootloader is already unlocked)
- I can't acess TWRP on reboot now, it seems that i enter on some Oneplus Recovery Mode, not TWRP itself
- Root isn't working
If you need any extra information just ask me
djmarkybr said:
Hey buddy, i followed your steps and now the phone isn't starting totally, it stops on the OnePlus start screen with the white balls around the red one. Should i do the process all again? Can i start TWRP in this situation?
edit: nvm, i try it again and now it works normally But Magisk isn't working, when i try to flash it through TWRP it shows "Updater process ended with ERROR: 1
Error instaling zip file '/sdcard/Magisk....' "
And Android version is still 7.1.1 , so i need to update the Android through the phone itself and then i reapply the root?
edit2: sorry for so many edits in this same reply, let me try to explain the status of all the process right now to see if you can give me some tip:
- Android is on 8.1.0 version right now; Do i need to upload it more?
- Bootloader is unlocked (at least when i go "Enable OEM Unlocking" on Developer options, i cant check this option cause it says that bootloader is already unlocked)
- I can't acess TWRP on reboot now, it seems that i enter on some Oneplus Recovery Mode, not TWRP itself
- Root isn't working
If you need any extra information just ask me
Click to expand...
Click to collapse
I acknowledge your PM, Little tied up at the moment. Please allow me time till tonight to study your case and i shall reply with the best way forward. Don't do anything silly till then
Edit: Please confirm the current status of the device
Rom/OS version
TWRP yes/no
Magisk yes/no
Funk Wizard said:
I acknowledge your PM, Little tied up at the moment. Please allow me time till tonight to study your case and i shall reply with the best way forward. Don't do anything silly till then
Edit: Please confirm the current status of the device
Rom/OS version
TWRP yes/no
Magisk yes/no
Click to expand...
Click to collapse
No problem FunkWizard, take your time and answer when possible, i'll hold my fingers to don't get a worst situation. :angel:
Rom/OS version : Custom ROM(i believe)/8.1.0
TWRP: no; after everything i tried, when i try to acess TWRP now, it doesn't enter on TWRP itself, it shows a different recover screen, like a recovery screen of Oneplus system, just like the picture i attached.
Magisk: no; one of my goals in this entire process was to uninstall SuperSU and install Magisk after all, but when TWRP was working and i tried to install Magisk, i got an error and Magisk didn't install correctly, and since i've uninstalled the SuperSU, i'm without root right now, and i can't even try to install it since TWRP is working right now :crying:
djmarkybr said:
No problem FunkWizard, take your time and answer when possible, i'll hold my fingers to don't get a worst situation. :angel:
Rom/OS version : Custom ROM(i believe)/8.1.0
TWRP: no; after everything i tried, when i try to acess TWRP now, it doesn't enter on TWRP itself, it shows a different recover screen, like a recovery screen of Oneplus system, just like the picture i attached.
Magisk: no; one of my goals in this entire process was to uninstall SuperSU and install Magisk after all, but when TWRP was working and i tried to install Magisk, i got an error and Magisk didn't install correctly, and since i've uninstalled the SuperSU, i'm without root right now, and i can't even try to install it since TWRP is working right now :crying:
Click to expand...
Click to collapse
you lost TWRP sometimes happen but not worry you can easly load again :good:
Mervingio said:
you lost TWRP sometimes happen but not worry you can easly load again :good:
Click to expand...
Click to collapse
Thank God o/ i just need to know how lol :laugh:
djmarkybr said:
No problem FunkWizard, take your time and answer when possible, i'll hold my fingers to don't get a worst situation. :angel:
Rom/OS version : Custom ROM(i believe)/8.1.0
TWRP: no; after everything i tried, when i try to acess TWRP now, it doesn't enter on TWRP itself, it shows a different recover screen, like a recovery screen of Oneplus system, just like the picture i attached.
Magisk: no; one of my goals in this entire process was to uninstall SuperSU and install Magisk after all, but when TWRP was working and i tried to install Magisk, i got an error and Magisk didn't install correctly, and since i've uninstalled the SuperSU, i'm without root right now, and i can't even try to install it since TWRP is working right now :crying:
Click to expand...
Click to collapse
djmarkybr said:
Thank God o/ i just need to know how lol :laugh:
Click to expand...
Click to collapse
If you have oneplus recovery instead of twrp then you can't be on custom ROM, it has to be on oxygenos. Unless I know of what version I would not be able to give you the step by step process.
U can flash twrp easily, simply download the latest Bluspark twrp and flash it via fastboot steps on the unlock device thread in the guides section.
There on you can download and flash the full zips from twrp followed by Magisk.
Sent from my OnePlus6T using XDA Labs
Funk Wizard said:
If you have oneplus recovery instead of twrp then you can't be on custom ROM, it has to be on oxygenos. Unless I know of what version I would not be able to give you the step by step process.
U can flash twrp easily, simply download the latest Bluspark twrp and flash it via fastboot steps on the unlock device thread in the guides section.
There on you can download and flash the full zips from twrp followed by Magisk.
Sent from my OnePlus6T using XDA Labs
Click to expand...
Click to collapse
Sorry Funk, i confused the information, my OxigenOS is 5.1.4
I'll wait for your step by step just to make sure i don't do something wrong
Hi. I download the official update on My 5t rooted. But do not install correctly. "installation failed", it's a twrp problem? I i flash the stock recovery works fine? Thanks.
bramby said:
Hi. I download the official update on My 5t rooted. But do not install correctly. "installation failed", it's a twrp problem? I i flash the stock recovery works fine? Thanks.
Click to expand...
Click to collapse
I don't know, i'm also lost here. Hope someone can help you too
bramby said:
Hi. I download the official update on My 5t rooted. But do not install correctly. "installation failed", it's a twrp problem? I i flash the stock recovery works fine? Thanks.[/QUOTE @djmarkybr
I flashed back stock recovery and all went fine with Pie!
Gesendet von meinem CLT-L29 mit Tapatalk
Click to expand...
Click to collapse