Develop Bugs

cm updates

Guys i need your help ..i got cm 10.1 jelly bean on my htc one x n on cm updates wheneva i download n install it directly from my htc when the update complete it go on booot loop ..
all i have to do is to wipe the phone complete and re install cm on my phone.. and i saw a post where u need to go to cwm recovery to install it by using install from sdcard can anyone tell me how to do it properly without losing any data .. and another thing do i have to install each update ?
i install by using tHe latest update 20130324 do i have TO INSTALL ALL UPDATE bcz with 20130324 I cant use flash light in camera whereas in previous update 20130323 i could use flash light help me thank you

1. Dl rom using cm updater
2. Boot to recovery
3. Flash it /sdcard/cmupdater
4. Flash the vendor installer
(5) If you bootloop, flash the boot.img also.
No you dont need to install every update. Do it like once a week and youll still get all the changes.
@flashlight There might be some minor flaws because it's an automated build system. If you lose some feature you care about just revert to a backup.

TToivanen said:
1. Dl rom using cm updater
2. Boot to recovery
3. Flash it /sdcard/cmupdater
4. Flash the vendor installer
(5) If you bootloop, flash the boot.img also.
No you dont need to install every update. Do it like once a week and youll still get all the changes.
@flashlight There might be some minor flaws because it's an automated build system. If you lose some feature you care about just revert to a backup.
Click to expand...
Click to collapse
Ty i will try to do it as u say next time by flast ir u mean install it ? From recovery? I select install from sd ?

Yeah.

[Rooted][Deodexed][14.2.A.0.290][BETA]

Current status-Thread closed by OP, errors are being fixed.
Here is my stock 14.2.A.0.290 pre-rooted and Deodexed Rom based on my FTF from the general section.
I have NOT tested it (Some of you will be aware that it was birthday yesterday so I just put it on to cook whilst I went out) but it should work.
YOU HAVE BEEN WARNED, MAKE A BACKUP
Prerequisites
C6903
You must be on any ROM with recovery. If you have already updated to 14.2.A.0.290, then downgrade, root and install recovery. I will not give instructions on that here, there are plenty of guides on how to do it, use google.
Instructions
Download the ROM.zip, the kernel.ftf, and my update to the recovery package
Put the .zip files on your external SD card
Enter recovery, MAKE A BACKUP. ENSURE YOU HAVE EVERYTHING BACKED UP YOU DO NOT WANT TO LOSE. Wipe everything, flash the 14.2.A.0.290-gregbradley-xda-rc.zip. DO NOT REBOOT.
Flash DualRecovery-CMWTouch.zip, DO NOT REBOOT, instead goto advanced and choose power off. If that options is not present, hold power and volume up for 3 seconds until it vibrates 3 times.
Flash the kernel.ftf using flashtool.
The first boot will be a long time
Please report back as to how this goes. I am at work today and cant test myself. If you get a bootloop, restore a backup or flash stock FTF again.

reserved

Great work mate. Which version is this for? 6902/03?

I think it would be for 6903 as he owns one

gregbradley said:
Here is my stock 14.2.A.0.290 pre-rooted and Deodexed Rom based on my FTF from the general section.
I have NOT tested it (Some of you will be aware that it was birthday yesterday so I just put it on to cook whilst I went out) but it should work.
YOU HAVE BEEN WARNED, MAKE A BACKUP
Prerequisites
You must be on any ROM with recovery. If you have already updated to 14.2.A.0.290, then downgrade, root and install recovery. I will not give instructions on that here, there are plenty of guides on how to do it, use google.
Instructions
Download the ROM.zip, the kernel.ftf, and my update to the recovery package
Put the .zip files on your external SD card
Enter recovery, MAKE A BACKUP. ENSURE YOU HAVE EVERYTHING BACKED UP YOU DO NOT WANT TO LOSE. Wipe everything, flash the 14.2.A.0.290-gregbradley-xda-rc.zip. DO NOT REBOOT.
Flash DualRecovery-CMWTouch.zip, DO NOT REBOOT, instead goto advanced and choose power off. If that options is not present, hold power and volume up for 3 seconds until it vibrates 3 times.
Flash the kernel.ftf using flashtool.
The first boot will be a long time
Please report back as to how this goes. I am at work today and cant test myself. If you get a bootloop, restore a backup or flash stock FTF again.
Click to expand...
Click to collapse
It's for 6902 or 6903 or else?

Sorry, its for C6903

Got an abort on instalation,status 7

[email protected] said:
Got an abort on instalation,status 7
Click to expand...
Click to collapse
Thanks for testing.
I will close this thread until I have fixed it.

DISCUSSION: YU Yureka CM 12(S) Lollipop Update

Current firmware: Android 5.0.2, Build LRX22G, Cyanogen OS version 12.0-YNG1TAS0W0
OTA: http://builds.cyngn.com/cyanogen-os...deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
Fastboot flashable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
Boot Debuggable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-boot-debuggable.img
Use OTA for manually update from any official KitKat build; don't use fastboot flashable images on existing devices with KitKat bootloader - it will brick the device!
How to unbrick: http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040 (Credit goes to @tirta.agung)

OTA downloaded.... Now going with flashboot...

Need Some Help
Deleted

anyone flashed it yet???
Sent from my AO5510 using Tapatalk

Flashed it..initial boot will take a long time

blackyz said:
OTA downloaded.... Now going with flashboot...
Click to expand...
Click to collapse
I tried fastboot method now my phone is not booting

anyone done it successfully? my DL is halfway so I need procedural help.

Phone not booting
sharan.nyn said:
I tried fastboot method now my phone is not booting
Click to expand...
Click to collapse
I flashed with fastboot process successful but my phone not booting, nothing happening. i don't know what to do now no logo just dead.

I flashed it with TWRP.
Awsm CM12S.
Super smooth !

mralam92 said:
I flashed with fastboot process successful but my phone not booting, nothing happening. i don't know what to do now no logo just dead.
Click to expand...
Click to collapse
Same here bro!
now following this
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040

sharan.nyn said:
Same here bro!
now following this
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Click to expand...
Click to collapse
service centre help or not?

Posted cm12
Just installed the zip version of cm12 on yu. Could not wait for the official ota update. Updated zip using cwm recovery which I had installed while the phone was running on the cm11 kitkat 4.4.4 version.
I understand that since this is just a system update there is no need to change or revert back to the original recovery.
(just a doubt- is it necessary to revert back to original 4.4.4 system stock recovery in case we get the OTA or the OTA will take care of any Custom recovery and will install iteslf?)
Initial boot will take a long time due to the Android Runtime (ART) virtual machine which is the improvisation over the Dalvik Cache. So please be patient for all the 122 apps to get registered in by ART. I had tried the ART while on cm11 4.4.4 (despite of system warning that it might lead to crashes etc... ), even then it took a very long time......
Working absolutely fine. Initial experience is awesome. Will be observing it now for some time. Most other features are similar to the cm11. no more 3g detection errors. Got to explore more....
My first posting in XDA.
I owe a lot to this community from which I have taken a lot. I hope I will be able to give back even little that I have got to help others. :good::good:
By zip version i mean the version that can be installed using the phone recovery with out the need of a computer to push the system (i.e. the flashable version). I am not aware what the debuggable version means.

mralam92 said:
service centre help or not?
Click to expand...
Click to collapse
Service center said they will pickup the device in 7-8 days

please tell me difference between OTA,Fastboot flashable image and Boot Debuggable image.And which one should I download to install.?

Titokhan said:
OTA: http://builds.cyngn.com/cyanogen-os...deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
Fastboot flashable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
Boot Debuggable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-boot-debuggable.img
Click to expand...
Click to collapse
Is the Android version 5.0.x or 5.1?
Has anyone encountered any bugs at all?
To flash through recovery, do I need the OTA version?

CM 12 update
guys plzzz help me as lollipop is out for yu...can i install ?? i have rooted my yu but i m still on stock rom i.e cm 11 and i have cwm ,can i flash the cm12 zip file using cwm ..

dont flash thru fastboot all who flashed it thru are having hard bricked devices

weshall said:
guys plzzz help me as lollipop is out for yu...can i install ?? i have rooted my yu but i m still on stock rom i.e cm 11 and i have cwm ,can i flash the cm12 zip file using cwm ..
Click to expand...
Click to collapse
YES YOU CAN JUST FOLLOW THIS STEPS
1. Download official CM12s Ota(1st zip in the link).
2. Place the downloaded zip file in the ‘download’ folder on phone’s internal storage.
3. Boot Yureka into Stock Cyanogen recovery - To do so, power off the phone. Then press Volume Up + Volume Down and Power button simultaneously,Onec you boot into recovery do data/ factory reset.
4. Select ‘Apply Update’ > ‘choose from internal storage’ > /0 > Download > and select “cm-12.0-YNG1TAS0W0-tomato-signed.zip” file. The ROM will be flashed and you should be seeing the Android Bot
5. Once installation is over, go to main page and ‘wipe cache partition’
6. Then select Reboot system now
That’s it! Wait for a while as the device boots for the first time with all new and fresh Cyanogen OS 12.
IF you dont get anyhting just revert me back ,or pm will help you.:laugh:

Titokhan said:
Current firmware: Android 5.0.2, Build LRX22G, Cyanogen OS version 12.0-YNG1TAS0W0
OTA: http://builds.cyngn.com/cyanogen-os...deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
Fastboot flashable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
Boot Debuggable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-boot-debuggable.img
Use OTA for manually update from any KitKat build; don't use fastboot flashable images on existing devices with KitKat bootloader - it'll brick the device!
Click to expand...
Click to collapse
It just got updated if you flash it on kitkat bootloader, the device will get bricked
Many users have got their device bricked, the warning was too late I flashed it today at 1:50 AM

weshall said:
guys plzzz help me as lollipop is out for yu...can i install ?? i have rooted my yu but i m still on stock rom i.e cm 11 and i have cwm ,can i flash the cm12 zip file using cwm ..
Click to expand...
Click to collapse
Hi, You can very well install the .....signed.zip using the CWM recovery as I did.
1. Install the .....signed.zip file and not the ....flashable.zip or the ....bootable.zip files. Only the .....SIGNED.ZIP file either on your phone memory or sdcard
2. Reboot into the recovery mode either by using the advanced reboot option or by pressing the volumeup+down button and power buttons simultaneously and releasing them once you see the Yu logo and phone vibrates.
2. Use the Factory reset command first and then wipe the Cache
3. Navigate to the Install zip and chose the .....SIGNED.zip from either your phone memory or the SD Card as CWM has the option to chose the zip file. and swipe to install it.
4. After successful installation navigate to reboot and swipe to allow the system to restart.
5. Intial boot takes a very long time saying Android is updating. This is because Lollipop uses Android Runtime (ART) by default and not Dalvik Cache as a virtual machine for all apps. So please be patient till all the 122 or so apks are updated by ART. Takes around 10-15minutes.
6. The usual fist time boot stuff.... and then...
7. Enjoy. CM12 it is sweet.
---------- Post added at 09:58 AM ---------- Previous post was at 09:43 AM ----------
id74em8 said:
Is the Android version 5.0.x or 5.1?
Has anyone encountered any bugs at all?
To flash through recovery, do I need the OTA version?
Click to expand...
Click to collapse
It is android version 5.0.2
To flash through recovery (either CWM or TWRP) use the .....SIGNED.ZIP i.e. the first file in the list and NOT the .flashable.zip or the last one. Only the first one.
I installed the zip through CWM
The only bug I noticed was when you add the Powersaver option tile in the Notification drawer, when in the power saving mode, a notification showing the power save mode got invoked. When I used the same option after rebooting I am not getting it now..
Also all of a sudden a red boundary started to appear at the edges of the screen. So I though I had opted for the screen refresh notification in the Developer options but I had not. Still i could see the red rectangle when the screen refreshed. I had to reboot the system. Now fine.

[Q] I would like to use Cyanogenmod 12.1 on Xperia M, but how?

Hi guys
I'm very new to flashing phones, so please baby steps
I'm trying to flash the Cyanogenmod 12.1 to an elderly Xperia M.
I've tried asking for assistance on CM's page, but so far no luck, I hope somebody here is more helpfull.
I've downloaded the zip file, unzipped it and uploaded boot.img to it, but when it reboots, it just shows the Sony logo, and a blue led, but nothing else.
If I shut it down by removing the battery, start it up and press the volume rocker it boots up in Cyanogemnod recovery, but not cwm recovery.
Can somebody tell me what I'm doing wrong? I'm trying to follow the CM article regarding this specific CM build.

fribse said:
Hi guys
I'm very new to flashing phones, so please baby steps
I'm trying to flash the Cyanogenmod 12.1 to an elderly Xperia M.
I've tried asking for assistance on CM's page, but so far no luck, I hope somebody here is more helpfull.
I've downloaded the zip file, unzipped it and uploaded boot.img to it, but when it reboots, it just shows the Sony logo, and a blue led, but nothing else.
If I shut it down by removing the battery, start it up and press the volume rocker it boots up in Cyanogemnod recovery, but not cwm recovery.
Can somebody tell me what I'm doing wrong? I'm trying to follow the CM article regarding this specific CM build.
Click to expand...
Click to collapse
After flashing the boot.img with your Flashtool (I guess?), did you flash the ROM? I mean the CM12.1 ROM zip?

AndyPhoenix9879 said:
After flashing the boot.img with your Flashtool (I guess?), did you flash the ROM? I mean the CM12.1 ROM zip?
Click to expand...
Click to collapse
Hi Andy
Thankyou for your assistance.
I've tried following the wiki guide, so I've downloaded the CM12.1, unzipped it, and used 'fastboot' to copy it into the phone, and then reboot it (as it is explained in the wiki article wiki.cyanogenmod.org/w/Install_CM_for_nicki
I don't have a Flashtool installed, should I use another method for updating?

fribse said:
Hi Andy
Thankyou for your assistance.
I've tried following the wiki guide, so I've downloaded the CM12.1, unzipped it, and used 'fastboot' to copy it into the phone, and then reboot it (as it is explained in the wiki article wiki.cyanogenmod.org/w/Install_CM_for_nicki
I don't have a Flashtool installed, should I use another method for updating?
Click to expand...
Click to collapse
Best to use Flashtool, it's much safer and the information and guidelines are already prepared in xda. So any doubts could be resolved rather quickly if any. Anyway goodluck and happy flashing!

Do you habe unlocked Bootloader?
Sent from my C1904 using XDA Free mobile app

AndyPhoenix9879 said:
Best to use Flashtool, it's much safer and the information and guidelines are already prepared in xda. So any doubts could be resolved rather quickly if any. Anyway goodluck and happy flashing!
Click to expand...
Click to collapse
Thanks, can you tell me where I can find the right flash tool, and where I can read more about how to do this?

fribse said:
Thanks, can you tell me where I can find the right flash tool, and where I can read more about how to do this?
Click to expand...
Click to collapse
Flashtool: http://www.flashtool.net/index.php
Tutorial(Basics): http://forum.xda-developers.com/showthread.php?t=2697277
Happy flashing and all the best @fribse

AndyPhoenix9879 said:
Flashtool: http://www.flashtool.net/index.php
Tutorial(Basics): http://forum.xda-developers.com/showthread.php?t=2697277
Happy flashing and all the best @fribse
Click to expand...
Click to collapse
Hi Andy
Ok, after finally getting it downloaded via the torrent, and actually getting the right file instead of a bunch of adware from the download links, I've tried starting it.
It says I'm not in USB debugging mode.
But to enable that I have to get into the phone, and it's currently not booting.
The flashboot refers to a 'back' button, but I don't have a physical back button on the C1905, what on earth do I do?

Ahaaa, part success, it needed charging. So after having it charged, and then connected to the phone, I've been able to flash a 'GLOBAL' firmware to the phone.
It now starts up as it should in the global firmware, and as soon as PC Companion saw it, it told me there is an update.
So that's great. Now I'm going to try with the Cyanogenmod again But I guess I have to find a '.ftf' version of it?

fribse said:
Ahaaa, part success, it needed charging. So after having it charged, and then connected to the phone, I've been able to flash a 'GLOBAL' firmware to the phone.
It now starts up as it should in the global firmware, and as soon as PC Companion saw it, it told me there is an update.
So that's great. Now I'm going to try with the Cyanogenmod again But I guess I have to find a '.ftf' version of it?
Click to expand...
Click to collapse
Ok, so right now, you are using stock FW and unlocked bootloader?
Step 1. Prepare files.
You will need the CM zip, Google Apps Zip, and a signed CWM Zip. Where do you find a signed CWM Zip? Look at Step 2.
Step 2.Sign the CWM zip from here, with the tool from here.
Step 3. Put the 3 Zip files on your SD card. Also, extract the boot.img and keep it somewhere easily accessible.
Step 4. I'll assume you have installed the nicki drivers for flashtool. Launch flashtool. The click the lightning bolt icon and select fastboot. With your xperia m sitched off, hold the VOL_UP key and connect USB cable. You should get a blue LED. Flash the boot.img as kernel.
Step 5. Select reboot into system. When a magenta LED shows, press a volume button. You should have booted to CM recovery. Browse to install ZIP, and flash the signed CWM zip.
Step 6. Power the phone off and repeat step 5. You should boot into CWM. Take a full backup of your phone first. Then wipe cache and data. Finally, flash CM zip and google apps zip.
Step 7. Wipe cache and reboot the phone.
Step 8. Sit back chillax, first boot will seem to take ages. Only after about 20 mins should you be concerned.
ENJOY CM12.1
Just to let you know, apps will take up more memory on Lollipop than other earlier versions. This is normal.

That worked perfectly, thankyou very much.
I now have a CM12.1 Xperia M, very nice

theperson333 said:
Ok, so right now, you are using stock FW and unlocked bootloader?
Step 1. Prepare files.
You will need the CM zip, Google Apps Zip, and a signed CWM Zip. Where do you find a signed CWM Zip? Look at Step 2.
Step 2.Sign the CWM zip from here, with the tool from here.
Step 3. Put the 3 Zip files on your SD card. Also, extract the boot.img and keep it somewhere easily accessible.
Step 4. I'll assume you have installed the nicki drivers for flashtool. Launch flashtool. The click the lightning bolt icon and select fastboot. With your xperia m sitched off, hold the VOL_UP key and connect USB cable. You should get a blue LED. Flash the boot.img as kernel.
Step 5. Select reboot into system. When a magenta LED shows, press a volume button. You should have booted to CM recovery. Browse to install ZIP, and flash the signed CWM zip.
Step 6. Power the phone off and repeat step 5. You should boot into CWM. Take a full backup of your phone first. Then wipe cache and data. Finally, flash CM zip and google apps zip.
Step 7. Wipe cache and reboot the phone.
Step 8. Sit back chillax, first boot will seem to take ages. Only after about 20 mins should you be concerned.
ENJOY CM12.1
Just to let you know, apps will take up more memory on Lollipop than other earlier versions. This is normal.
Click to expand...
Click to collapse
Hey, I am new to android. I tried your tutorial and millions of others to put CM 1.2 on my Sony Xperia M, but I had no luck at all. I am always getting errors like "Unable to mount /data" "e: format_volume failed to mount data/, formatting instead" "failed to mount dev/block/platform/msm_sdcc.1/by-name/userdata". I don't know what I am doing wrong. The first tutorial I followed was the one at the official wiki from the Cyanogenmod, and I got those errors. I didn't have a backup, but I managed to flash a stock rom I downloaded on the internet. Can you help me? I've been awake for 20hours trying to solve this but I always get the same error
---------- Post added at 11:14 AM ---------- Previous post was at 11:06 AM ----------
theperson333 said:
Ok, so right now, you are using stock FW and unlocked bootloader?
Step 1. Prepare files.
You will need the CM zip, Google Apps Zip, and a signed CWM Zip. Where do you find a signed CWM Zip? Look at Step 2.
Step 2.Sign the CWM zip from here, with the tool from here.
Step 3. Put the 3 Zip files on your SD card. Also, extract the boot.img and keep it somewhere easily accessible.
Step 4. I'll assume you have installed the nicki drivers for flashtool. Launch flashtool. The click the lightning bolt icon and select fastboot. With your xperia m sitched off, hold the VOL_UP key and connect USB cable. You should get a blue LED. Flash the boot.img as kernel.
Step 5. Select reboot into system. When a magenta LED shows, press a volume button. You should have booted to CM recovery. Browse to install ZIP, and flash the signed CWM zip.
Step 6. Power the phone off and repeat step 5. You should boot into CWM. Take a full backup of your phone first. Then wipe cache and data. Finally, flash CM zip and google apps zip.
Step 7. Wipe cache and reboot the phone.
Step 8. Sit back chillax, first boot will seem to take ages. Only after about 20 mins should you be concerned.
ENJOY CM12.1
Just to let you know, apps will take up more memory on Lollipop than other earlier versions. This is normal.
Click to expand...
Click to collapse
By the way. I can access the Recovery mod, and I have a 512mb external card to put the files, I already tried the sideload method and put the zip files into the card as you said. But no luck. And another point, I wasn't able to apply the step 5, so I flashed the CWM staight, and I had errors when I tried to install both CM 1.2 and Gapps. I would be more than thankful if you helped me.

fr3d3r1ko said:
Hey, I am new to android. I tried your tutorial and millions of others to put CM 1.2 on my Sony Xperia M, but I had no luck at all. I am always getting errors like "Unable to mount /data" "e: format_volume failed to mount data/, formatting instead" "failed to mount dev/block/platform/msm_sdcc.1/by-name/userdata". I don't know what I am doing wrong. The first tutorial I followed was the one at the official wiki from the Cyanogenmod, and I got those errors. I didn't have a backup, but I managed to flash a stock rom I downloaded on the internet. Can you help me? I've been awake for 20hours trying to solve this but I always get the same error
---------- Post added at 11:14 AM ---------- Previous post was at 11:06 AM ----------
By the way. I can access the Recovery mod, and I have a 512mb external card to put the files, I already tried the sideload method and put the zip files into the card as you said. But no luck. And another point, I wasn't able to apply the step 5, so I flashed the CWM staight, and I had errors when I tried to install both CM 1.2 and Gapps. I would be more than thankful if you helped me.
Click to expand...
Click to collapse
Just to check, did you install stock at least once after BL unlock? It is required to fix the data partition. Flash the stock ftf and let it boot. Then proceed with the instructions I provided.
Please remember that YOU, and only YOU are responsible for your actions. These instructions are provided "as is , with all faults".

theperson333 said:
Just to check, did you install stock at least once after BL unlock? It is required to fix the data partition. Flash the stock ftf and let it boot. Then proceed with the instructions I provided.
Please remember that YOU, and only YOU are responsible for your actions. These instructions are provided "as is , with all faults".
Click to expand...
Click to collapse
Not sure what I did but I managed to work, I guess it was checking the reset customization on Flashtool. Thank you for your help!

Does the 'Full backup' from 6 include absolutely everything I could possibly need to go back to the exact same state my phone is currently in? In other words, is it like a copy of everything that I could possibly change or mess up on my phone? I always thought nandroid backup did that, but now I just read that doesn't backup the kernel for example.
And I'm assuming this 'full backup' can be done using flashtool, right?
Thanks

HOW-TO Root OPPO F1s

Hi everyone! So as you know we all want to root our phones but this particular phone doesn't want to, atleast on Android 6. So I made a rooting method for this phone. Now, I know that there is already another rooting method but that didn't work for me so I rooted it like this:
Download the Android 5.1 firmware for this phone
Install a fresh copy of Android 6. Search Android 6 for OPPO F1s.
Now, download the SP-Flash-Tool from the attachments and the recovery.img.zip file.
Extract SP-Flash-Tool and the recovery.img.zip, and then load up the scatter file from the earlier firmware and then uncheck everything and leave recovery unchecked.
Click on the recovery.img path and select the recovery.img that you downloaded.
Press Ctrl+D and then shutdown your phone, hold the Volume+ button and plug it in.
After the green checkbox appears unplug your phone and boot into recovery.
Factory reset the phone and then sideload the Magisk zip after downloading it from attachments.
After flashing reboot your phone and press No to the question that comes up. Remember, if you press Yes, You lose your phone.
That's it! It will take some time to boot up, but your data will be untouched.
I hope it helps

If anyone is reading this please let me know what ROM you want on the OPPO F1s, stock ROMs from other phones or LineageOS, etc.

is this working

mxpro1996 said:
Working.
Click to expand...
Click to collapse
is this working in oppo f1s, in android v.6 and color os version 6?

hi can any one help ,e which guide is working to root oppof1s android version 6, color os version 3,kernel vrrsion 3.18.22, security patch level feb 5, 2017

muhammad42620 said:
If anyone is reading this please let me know what ROM you want on the OPPO F1s, stock ROMs from other phones or Lineage
muhammad42620 said:
If anyone is reading this please let me know what ROM you want on the OPPO F1s, stock ROMs from other phones or LineageOS, etc.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

muhammad42620 said:
Hi everyone! So as you know we all want to root our phones but this particular phone doesn't want to, atleast on Android 6. So I made a rooting method for this phone. Now, I know that there is already another rooting method but that didn't work for me so I rooted it like this:
Download the Android 5.1 firmware for this phone
Install a fresh copy of Android 6. Search Android 6 for OPPO F1s.
Now, download the SP-Flash-Tool from the attachments and the recovery.img.zip file.
Extract SP-Flash-Tool and the recovery.img.zip, and then load up the scatter file from the earlier firmware and then uncheck everything and leave recovery unchecked.
Click on the recovery.img path and select the recovery.img that you downloaded.
Press Ctrl+D and then shutdown your phone, hold the Volume+ button and plug it in.
After the green checkbox appears unplug your phone and boot into recovery.
Factory reset the phone and then sideload the Magisk zip after downloading it from attachments.
After flashing reboot your phone and press No to the question that comes up. Remember, if you press Yes, You lose your phone.
That's it! It will take some time to boot up, but your data will be untouched.
I hope it helps
Click to expand...
Click to collapse