Current firmware: Android 5.0.2, Build LRX22G, Cyanogen OS version 12.0-YNG1TAS0W0
OTA: http://builds.cyngn.com/cyanogen-os...deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
Fastboot flashable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
Boot Debuggable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-boot-debuggable.img
Use OTA for manually update from any official KitKat build; don't use fastboot flashable images on existing devices with KitKat bootloader - it will brick the device!
How to unbrick: http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040 (Credit goes to @tirta.agung)
OTA downloaded.... Now going with flashboot...
Need Some Help
Deleted
anyone flashed it yet???
Sent from my AO5510 using Tapatalk
Flashed it..initial boot will take a long time
blackyz said:
OTA downloaded.... Now going with flashboot...
Click to expand...
Click to collapse
I tried fastboot method now my phone is not booting
anyone done it successfully? my DL is halfway so I need procedural help.
Phone not booting
sharan.nyn said:
I tried fastboot method now my phone is not booting
Click to expand...
Click to collapse
I flashed with fastboot process successful but my phone not booting, nothing happening. i don't know what to do now no logo just dead.
I flashed it with TWRP.
Awsm CM12S.
Super smooth !
mralam92 said:
I flashed with fastboot process successful but my phone not booting, nothing happening. i don't know what to do now no logo just dead.
Click to expand...
Click to collapse
Same here bro!
now following this
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
sharan.nyn said:
Same here bro!
now following this
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Click to expand...
Click to collapse
service centre help or not?
Posted cm12
Just installed the zip version of cm12 on yu. Could not wait for the official ota update. Updated zip using cwm recovery which I had installed while the phone was running on the cm11 kitkat 4.4.4 version.
I understand that since this is just a system update there is no need to change or revert back to the original recovery.
(just a doubt- is it necessary to revert back to original 4.4.4 system stock recovery in case we get the OTA or the OTA will take care of any Custom recovery and will install iteslf?)
Initial boot will take a long time due to the Android Runtime (ART) virtual machine which is the improvisation over the Dalvik Cache. So please be patient for all the 122 apps to get registered in by ART. I had tried the ART while on cm11 4.4.4 (despite of system warning that it might lead to crashes etc... ), even then it took a very long time......
Working absolutely fine. Initial experience is awesome. Will be observing it now for some time. Most other features are similar to the cm11. no more 3g detection errors. Got to explore more....
My first posting in XDA.
I owe a lot to this community from which I have taken a lot. I hope I will be able to give back even little that I have got to help others. :good::good:
By zip version i mean the version that can be installed using the phone recovery with out the need of a computer to push the system (i.e. the flashable version). I am not aware what the debuggable version means.
mralam92 said:
service centre help or not?
Click to expand...
Click to collapse
Service center said they will pickup the device in 7-8 days
please tell me difference between OTA,Fastboot flashable image and Boot Debuggable image.And which one should I download to install.?
Titokhan said:
OTA: http://builds.cyngn.com/cyanogen-os...deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
Fastboot flashable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
Boot Debuggable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-boot-debuggable.img
Click to expand...
Click to collapse
Is the Android version 5.0.x or 5.1?
Has anyone encountered any bugs at all?
To flash through recovery, do I need the OTA version?
CM 12 update
guys plzzz help me as lollipop is out for yu...can i install ?? i have rooted my yu but i m still on stock rom i.e cm 11 and i have cwm ,can i flash the cm12 zip file using cwm ..
dont flash thru fastboot all who flashed it thru are having hard bricked devices
weshall said:
guys plzzz help me as lollipop is out for yu...can i install ?? i have rooted my yu but i m still on stock rom i.e cm 11 and i have cwm ,can i flash the cm12 zip file using cwm ..
Click to expand...
Click to collapse
YES YOU CAN JUST FOLLOW THIS STEPS
1. Download official CM12s Ota(1st zip in the link).
2. Place the downloaded zip file in the ‘download’ folder on phone’s internal storage.
3. Boot Yureka into Stock Cyanogen recovery - To do so, power off the phone. Then press Volume Up + Volume Down and Power button simultaneously,Onec you boot into recovery do data/ factory reset.
4. Select ‘Apply Update’ > ‘choose from internal storage’ > /0 > Download > and select “cm-12.0-YNG1TAS0W0-tomato-signed.zip” file. The ROM will be flashed and you should be seeing the Android Bot
5. Once installation is over, go to main page and ‘wipe cache partition’
6. Then select Reboot system now
That’s it! Wait for a while as the device boots for the first time with all new and fresh Cyanogen OS 12.
IF you dont get anyhting just revert me back ,or pm will help you.:laugh:
Titokhan said:
Current firmware: Android 5.0.2, Build LRX22G, Cyanogen OS version 12.0-YNG1TAS0W0
OTA: http://builds.cyngn.com/cyanogen-os...deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
Fastboot flashable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-signed-fastboot.zip
Boot Debuggable image: http://builds.cyngn.com/cyanogen-os...cm-12.0-YNG1TAS0W0-tomato-boot-debuggable.img
Use OTA for manually update from any KitKat build; don't use fastboot flashable images on existing devices with KitKat bootloader - it'll brick the device!
Click to expand...
Click to collapse
It just got updated if you flash it on kitkat bootloader, the device will get bricked
Many users have got their device bricked, the warning was too late I flashed it today at 1:50 AM
weshall said:
guys plzzz help me as lollipop is out for yu...can i install ?? i have rooted my yu but i m still on stock rom i.e cm 11 and i have cwm ,can i flash the cm12 zip file using cwm ..
Click to expand...
Click to collapse
Hi, You can very well install the .....signed.zip using the CWM recovery as I did.
1. Install the .....signed.zip file and not the ....flashable.zip or the ....bootable.zip files. Only the .....SIGNED.ZIP file either on your phone memory or sdcard
2. Reboot into the recovery mode either by using the advanced reboot option or by pressing the volumeup+down button and power buttons simultaneously and releasing them once you see the Yu logo and phone vibrates.
2. Use the Factory reset command first and then wipe the Cache
3. Navigate to the Install zip and chose the .....SIGNED.zip from either your phone memory or the SD Card as CWM has the option to chose the zip file. and swipe to install it.
4. After successful installation navigate to reboot and swipe to allow the system to restart.
5. Intial boot takes a very long time saying Android is updating. This is because Lollipop uses Android Runtime (ART) by default and not Dalvik Cache as a virtual machine for all apps. So please be patient till all the 122 or so apks are updated by ART. Takes around 10-15minutes.
6. The usual fist time boot stuff.... and then...
7. Enjoy. CM12 it is sweet.
---------- Post added at 09:58 AM ---------- Previous post was at 09:43 AM ----------
id74em8 said:
Is the Android version 5.0.x or 5.1?
Has anyone encountered any bugs at all?
To flash through recovery, do I need the OTA version?
Click to expand...
Click to collapse
It is android version 5.0.2
To flash through recovery (either CWM or TWRP) use the .....SIGNED.ZIP i.e. the first file in the list and NOT the .flashable.zip or the last one. Only the first one.
I installed the zip through CWM
The only bug I noticed was when you add the Powersaver option tile in the Notification drawer, when in the power saving mode, a notification showing the power save mode got invoked. When I used the same option after rebooting I am not getting it now..
Also all of a sudden a red boundary started to appear at the edges of the screen. So I though I had opted for the screen refresh notification in the Developer options but I had not. Still i could see the red rectangle when the screen refreshed. I had to reboot the system. Now fine.
INSTALL OFFICIAL CM12 TO YU YUREKA
Yu Yureka has got the official Cyanogenmod 12S sealed and signed by Google which is being rolled out today! Few users has already got the update and we have captured the OTA link , that means now we don't have to wait for the OTA update. We can also install them manually and can enjoy the sweeter taste of Lollipop.
As it is officially confirmed, you may check the forum
_____________________________________________________________________________
Requirements :-
1.) Data Plan to download approx 680 mb OTA file.
2.) Charged Yu Yureka device.
3.) Stock recovery, download here
4.) Rashr to flash stock recovery.
5.) Backup all your data.
6.) Patience, it will require 30 min to install the update
Steps to Install the OTA update :-
1.) Flash the stock recovery first from Rashr or Flashify.
2.) Download the OTA zip file and place it in your storage.
3.) Power off your device, Now press Volume Up + Volume Down + Power button simultaneously.
4.) Cyanogenmod Official Recovery will be opened.
5.) Select 2nd option i.e. Apply Update
6.) Select the storage, you have copied the OTA zip file
7.) Select the OTA Zip file, and open it, it will start to install the update.
8.) Wait for the completing installation, you have to reboot it manually .
9.) First bootup will take time, so keep patience.
10.) Voila You have successfully updated your Yu Yureka to CM12S.
NOTE: We are not responsible to any damage to your device. Do at your own risk!
data's
my data's are deleted or not.
during this update ?
Yes, it will
Panneer Selvam said:
my data's are deleted or not.
during this update ?
Click to expand...
Click to collapse
Your Phone storage will be formatted! And your Internal Storage will not, but make the backup of that too
Hit Thanks if help
You havn't send the link of the files, Can you send the link of how to download those recovery too, if i does that, it mean by phone will be rooted na, Sorry i am new bee i don't know much about rooting
JoelXD said:
You havn't send the link of the files, Can you send the link of how to download those recovery too, if i does that, it mean by phone will be rooted na, Sorry i am new bee i don't know much about rooting
Click to expand...
Click to collapse
DONT worry YOU can flash the above file by stock recovery also,
if you dont understand anything revert me back.
D_Rising_Pheonix said:
DONT worry YOU can flash the above file by stock recovery also,
if you dont understand anything revert me back.
Click to expand...
Click to collapse
Hmmm i did and it got installed successfully, but when my factory restore it from new cm12, its again doing all that from begining, but only difference this time, its installing 122 app, and before it was 156 app. Is it normall, Will it take so long to factory reset in Lolipop ??
Will it solve the problem if i would have rooted my device, i just on the recovery mode of Yureka, by pressing volume key and power button , than apply update and update the ROM. and now everytime i factory reset, its doing the whole process again again.
Android is Upgrading ...
Please help
Thanks in Advance !
I'm on custom ROM crdroid and cwm recovery,
So I just need to flash stock recovery and then flash the ota?
On Custom Rom Can i flash this...
I am on custom rom, should i flash in official recovery and flash the update? or what should i do??
Is upgrading to cm12 worth it?
Link to download stock 64-bit cyanogen recovery for CM12.0-YNG1TASOWO
Please provide me Link to download stock 64-bit cyanogen recovery for CM12.0-YNG1TASOWO.Please also tell me how to flash it.l,Currently I m using CWM/TWRP recovery.
I am on cm12s official update not able to install music app of Sony walkman of z3. After installing and on play it says can't play the song. Help
I have kitkat 4.2.2 stockbase, rooted, trying to install cwm but stuck in the secure booting error boot certification verify.
Previously i installed rom manager app and flash the cwm from the app. After reboot to recovery, only stock recovery that showed, then i reboot to system, install freegee in order to flash the cwm but fail as freegee doesnt support gpro kitkat.
After that i install gpro kitkat recovery and flash the cwm from the app, success, reboot to recovery but stuck on the error.
I uninstalled rom manager and freegee, but still no luck to get the flashed cwm recovery,stuck in secure booting error.
Any suggestion or thread reference? Why is very difficult to install custom rom on this device?i plan to install carbon rom :crying:
Thank you in advance.
hotmatua.parulian said:
I have kitkat 4.2.2 stockbase, rooted, trying to install cwm but stuck in the secure booting error boot certification verify.
Previously i installed rom manager app and flash the cwm from the app. After reboot to recovery, only stock recovery that showed, then i reboot to system, install freegee in order to flash the cwm but fail as freegee doesnt support gpro kitkat.
After that i install gpro kitkat recovery and flash the cwm from the app, success, reboot to recovery but stuck on the error.
I uninstalled rom manager and freegee, but still no luck to get the flashed cwm recovery,stuck in secure booting error.
Any suggestion or thread reference? Why is very difficult to install custom rom on this device?i plan to install carbon rom :crying:
Thank you in advance.
Click to expand...
Click to collapse
Start from 4.1.2 stock, root, use freegee to bypass lockdown, flash latest TWRP then flash Lollipop ROMs... There is info about everything on the forums.
ShadySquirrel said:
Start from 4.1.2 stock, root, use freegee to bypass lockdown, flash latest TWRP then flash Lollipop ROMs... There is info about everything on the forums.
Click to expand...
Click to collapse
Thank you very much Shady.. Please be kindly to review steps that i should execute when flashing to Carbon Lollipop with regards to my current state (rooted 4.4.2. stock Kitkat):
Prerequisite:
- LG Flash Tool 2014 installed in PC
- LG United Mobile Driver (i use v3.11.3) installed in PC
- Stock firmware E98810e_00.kdz (Indonesia Jellybean) -- Jellybean stock base is required to cater modem/wakelock issue
- Stock firmware E98820c_00.kdz (Indonesia Kitkat)
- ROM Manager (for current state backup/restore)
- Freegee (to cater LG security issue after success flash)
- Towelroot (to root device after success flash)
- TWRP (for recovery tool after success flash)
- Downloaded ZeKrnl 1.7 Build 11/28 - https://forum.xda-developers.com/optimus-g-pro/development/rom-e980-ze-krnl-1-6-t3255975
- Downloaded ZeKrnl 1.6 - https://forum.xda-developers.com/optimus-g-pro/development/rom-e980-ze-krnl-1-6-t3255975/page4 (to cater camera issue after flashed to Carbon)
1. Flash CWM via ROM Manager
2 Execute Backup Current ROM to sd card via ROM Manager and save copy to PC
3. Backup manual for files, apks, contacts to sd card and save copy to PC
4. Copy ZeKrnl 1.7 zip & ZeKrnl 1.6 zip to sd card
5. Turn off phone, plug usb cable to phone
6. Press & hold Volume keys (Up + Down) then plug the other end of usb into PC to until download mode showned
7. Run LG Flash Tool with administrator privilege
8. Flash E98810e firmware into the device till success
(After Success Flash to Andro 4.1.2 JB):
9. Install towelroot and root the device
10. Install freegee to cater LG security issue
11. Install latest TWRP
12. Reboot into recovery mode
13. wipe system, data, cache, dalvik cache
14. flash ZeKrnl 1.7
--Camera issue
debug.composition. type=dyn --> debug.composition. type=gpu using build prop editor and/or flash ZeKrnl 1.6 kernell
https://forum.xda-developers.com/optimus-g-pro/development/rom-e980-ze-krnl-1-6-t3255975/page8
--Deep Sleep issue
https://forum.xda-developers.com/optimus-g-pro/development/rom-e980-ze-krnl-1-6-t3255975/page10
-- SD Card issue
https://forum.xda-developers.com/optimus-g-pro/development/rom-e980-ze-krnl-1-6-t3255975/page12
-- Kernel parameter tuning sampel
https://forum.xda-developers.com/optimus-g-pro/development/rom-e980-ze-krnl-1-6-t3255975/page14
Btw looks like you are the only person that still active in this thread...really appreciate it...thank you very much
You're complicating it too much, to be honest
Just do it this way:
1. flash stock 4.1.2 and keep it that way
2. root, install Freegee, install initial recovery (twrp, cwm, doesn't mater), update it to TWRP from forums (2.8 version is preferred)
3. you're ready to flash create stock backup and flash roms.
If I remember, all those changes are already implemented in both SlimLP and Carbon. Slim has newer kernel and gpu drivers, and that's it.
So you are saying i just flash the rom as is without any further change?Noted shady...i will inform you the result
ShadySquirrel said:
You're complicating it too much, to be honest
Just do it this way:
1. flash stock 4.1.2 and keep it that way
2. root, install Freegee, install initial recovery (twrp, cwm, doesn't mater), update it to TWRP from forums (2.8 version is preferred)
3. you're ready to flash create stock backup and flash roms.
If I remember, all those changes are already implemented in both SlimLP and Carbon. Slim has newer kernel and gpu drivers, and that's it.
Click to expand...
Click to collapse
Ive tried your suggestion with the following result:
a. Flash to stock 4.1.2 (v10e) : success but then the master file i downloaded is gone
b. Root, install freegee, initial recovery: success
c. Update to twrp 2.8 using twrp manager: success
d. Flash to Carbon: fail, canot enter recovery mode with message secure booting error,boot certification verify
So i just rollback to kitkat stock
hotmatua.parulian said:
Ive tried your suggestion with the following result:
a. Flash to stock 4.1.2 (v10e) : success but then the master file i downloaded is gone
b. Root, install freegee, initial recovery: success
c. Update to twrp 2.8 using twrp manager: success
d. Flash to Carbon: fail, canot enter recovery mode with message secure booting error,boot certification verify
So i just rollback to kitkat stock
Click to expand...
Click to collapse
So, you can't boot TWRP at all? It seems that TWRP you installed isn't lokified. Are you sure you've installed TWRP 2.8? I remember flashing it directly via flashify on my device and it worked.. Also, check TWRP thread for lokified zip, I think someone posted that.
Edit: you see now why almost everyone abandoned this device
ShadySquirrel said:
So, you can't boot TWRP at all? It seems that TWRP you installed isn't lokified. Are you sure you've installed TWRP 2.8? I remember flashing it directly via flashify on my device and it worked.. Also, check TWRP thread for lokified zip, I think someone posted that.
Edit: you see now why almost everyone abandoned this device
Click to expand...
Click to collapse
Yes, i cant boot twrp, i used twrp manager apk,i think its not lokified.
hotmatua.parulian said:
Yes, i cant boot twrp, i used twrp manager apk,i think its not lokified.
Click to expand...
Click to collapse
After installing freegee's twrp, reboot to recovery. Then, it might be OK.
After that, reboot system and use flashify, the free version will do.
You can either choose to download the file or chose from your internal / external memory.
I'm using the latest version TWRP 3.0.2.0.
If it doesn't work at first, go back to start and try again...
g0at1 said:
After installing freegee's twrp, reboot to recovery. Then, it might be OK.
After that, reboot system and use flashify, the free version will do.
You can either choose to download the file or chose from your internal / external memory.
I'm using the latest version TWRP 3.0.2.0.
If it doesn't work at first, go back to start and try again...
Click to expand...
Click to collapse
Thanks for respond, i have to download the jb stockbase again as the file used for lg flash tool is missing, looks like flashtool keep it somewhere...btw, when i use flashtool to flash the jb stock (offline mode), it.doesnt complete 100%, at 99% device was successfully boot and normal but state in flashtool screen is 99% and message to.retry is showned up.
Fyi, after flashed to jb, i cant execute fastboot flash command, the result is waiting for any device, but adb devices command return expected result. Enable debugging setting is already checked also.
Quiet interesting this device...salut to programmers of this device...
hotmatua.parulian said:
Thanks for respond, i have to download the jb stockbase again as the file used for lg flash tool is missing, looks like flashtool keep it somewhere...btw, when i use flashtool to flash the jb stock (offline mode), it.doesnt complete 100%, at 99% device was successfully boot and normal but state in flashtool screen is 99% and message to.retry is showned up.
Fyi, after flashed to jb, i cant execute fastboot flash command, the result is waiting for any device, but adb devices command return expected result. Enable debugging setting is already checked also.
Click to expand...
Click to collapse
G Pro doesn't support fastboot commands (or is really limited in that field, I'm not sure what to say/think), due to some mess LG made. Mine didn't even want to 'adb reboot bootloader', it simply rebooted device back to system, and was pain in the ass for many things because It has custom download mode, it has custom boot sequence, everything is locked down... everything is different from everything else you're used to. Thank God back then a+b OTA system didn't exist, we'd never get any AOSP support not...
Do as g0at1 said - flash TWRP from Freegee, boot it to make sure it works, reboot back to system and flash newer TWRP from Flashify or any other tool like that one. I did have E988 (just Taiwan variant), and never had that much issues, nearly every time it was a straightforward 'flash JB KDZ, root it manually, Freegee, newer TWRP, backup, flash ROM', and trust me, that one was "revived" many times.
In the end, if even that doesn't help, flash CWM from Freegee, and update it with Philz Touch for E980. I think it will support Lollipop ROMs without any issues, just don't ever boot directly into it if you're not ready to mess with dd from recovery mode - always use adb.
hotmatua.parulian said:
Quiet interesting this device...salut to programmers of this device...
Click to expand...
Click to collapse
This device was one of the hardest devices to work with... and I had Note N7000 with bad MMC which nearly bricked five times running unrooted stock firmwares Samsung provided. And Tegra-based Galaxy S2 clone with many hardware and software issues on stock... And many nameless devices with chips made by "big" vendors, like Allwinner, Rockchip etc which got some older CyanogenMod version builds with some or even complete success... And I never, never had that much issues porting stuff to any of these above, as I had with G Pro. Heck, working on a overclocking and underclocking for G Pro took me nearly two months of coding, testing, scratching everything off and starting from the beginning to just get it to some functional level and make it work as intended... and when I look at that code, I still have a feeling that it isn't completed and that some fixes are still necessary. I won't even start with GPU issues, I've spent more time than I'd like to admit on patching sessions.
ShadySquirrel said:
G Pro doesn't support fastboot commands (or is really limited in that field, I'm not sure what to say/think), due to some mess LG made. Mine didn't even want to 'adb reboot bootloader', it simply rebooted device back to system, and was pain in the ass for many things because It has custom download mode, it has custom boot sequence, everything is locked down... everything is different from everything else you're used to. Thank God back then a+b OTA system didn't exist, we'd never get any AOSP support not...
Do as g0at1 said - flash TWRP from Freegee, boot it to make sure it works, reboot back to system and flash newer TWRP from Flashify or any other tool like that one. I did have E988 (just Taiwan variant), and never had that much issues, nearly every time it was a straightforward 'flash JB KDZ, root it manually, Freegee, newer TWRP, backup, flash ROM', and trust me, that one was "revived" many times.
In the end, if even that doesn't help, flash CWM from Freegee, and update it with Philz Touch for E980. I think it will support Lollipop ROMs without any issues, just don't ever boot directly into it if you're not ready to mess with dd from recovery mode - always use adb.
This device was one of the hardest devices to work with... and I had Note N7000 with bad MMC which nearly bricked five times running unrooted stock firmwares Samsung provided. And Tegra-based Galaxy S2 clone with many hardware and software issues on stock... And many nameless devices with chips made by "big" vendors, like Allwinner, Rockchip etc which got some older CyanogenMod version builds with some or even complete success... And I never, never had that much issues porting stuff to any of these above, as I had with G Pro. Heck, working on a overclocking and underclocking for G Pro took me nearly two months of coding, testing, scratching everything off and starting from the beginning to just get it to some functional level and make it work as intended... and when I look at that code, I still have a feeling that it isn't completed and that some fixes are still necessary. I won't even start with GPU issues, I've spent more time than I'd like to admit on patching sessions.
Click to expand...
Click to collapse
:good::good::good::good: salut to you...the true programmer..never quit..yes im agree with you...i had played with nexus 1,2,3 before but never found something like this...
OK then, i will try g0at1 suggestion, hopefully it works... Like you said its only JB, root, freegee, newer twrp, backup, flash custom
Update
I couldnt wait to try again,i cant download the jb stock for a while due to internet quota limitation, so i did this:
1. Flash to stock that i still have v20c 4.4.2
2. Reboot to stock recovery then reboot to system
3. Run roottool.kitkat batch script (found from http://www.gadgetstroop.com), reboot to recovery, sideload installation of root script with result success
4. Reboot to system, run Root Checker to ensure device has been rooted
5. Install cwm recovery with GPro Kitkat Recovery 6.0.4.4 with result success
6. Reboot to cwm recovery success and do nandroid backup
7. Reboot to system, install flashify, download latest twrp official 3.0.2 and flash it using flashify: success
8. Reboot to recovery, now the recovery become twrp
9. Install package Carbon 5.1 unofficial: fail with message "cant install this package on top of incompatible data"
hotmatua.parulian said:
Update
I couldnt wait to try again,i cant download the jb stock for a while due to internet quota limitation, so i did this:
1. Flash to stock that i still have v20c 4.4.2
2. Reboot to stock recovery then reboot to system
3. Run roottool.kitkat batch script (found from http://www.gadgetstroop.com), reboot to recovery, sideload installation of root script with result success
4. Reboot to system, run Root Checker to ensure device has been rooted
5. Install cwm recovery with GPro Kitkat Recovery 6.0.4.4 with result success
6. Reboot to cwm recovery success and do nandroid backup
7. Reboot to system, install flashify, download latest twrp official 3.0.2 and flash it using flashify: success
8. Reboot to recovery, now the recovery become twrp
9. Install package Carbon 5.1 unofficial: fail with message "cant install this package on top of incompatible data"
Click to expand...
Click to collapse
You forgot to wipe system, data and caches.
ShadySquirrel said:
You forgot to wipe system, data and caches.
Click to expand...
Click to collapse
Hehehe,..thats what i thought at 1st place when it comes to fail..so i reboot to system again, reboot to recovery and try again but the result is still the same....cant install on top of icompatible data..
P.S: now downloading your slim lp 5.1 beta unofficial and i want to try it 2morrow...
hotmatua.parulian said:
Hehehe,..thats what i thought at 1st place when it comes to fail..so i reboot to system again, reboot to recovery and try again but the result is still the same....cant install on top of icompatible data..
P.S: now downloading your slim lp 5.1 beta unofficial and i want to try it 2morrow...
Click to expand...
Click to collapse
I use SlimLP for a long time because it's the only one that works smoothly for me. You might not have any trouble flashing it Through the latest TWRP.
Have fun!
g0at1 said:
I use SlimLP for a long time because it's the only one that works smoothly for me. You might not have any trouble flashing it Through the latest TWRP.
Have fun!
Click to expand...
Click to collapse
Finally carbon installed successfully after I repeat the step very carefully including your reminder bout wiping...
Thank you very much, I will consult any bugs I found..
Half Day 1 issue:
- Scrambled screen layout each time booting
- Camera unstable/crash, also with apps camera mx and open camera
- i think batt is draining faster than kitkat stock
- i feel internet via wifi is slower than kitkat stock
- phone call, other person cant hear my voice
Just flashed SlimLP..Gosh its so slim and smooth...thank you very much...there issue bout the camera and scrambled screen each time I reboot the system, which camera apps I should use?