Develop Bugs

SOLUTION: To the "No Sound" problem on BA

OK.. Folks... after all the hard time i am facing with my unit. And all the love and care i spend on my BA. I came to the conclusion that the problem with the "No Sound" issues is link to the bluetooth.
What happened to the "No Sound" issue is that when making/receiving a call, the unit will try to connect to the BlueTooth Handfree profile (even if the Bluetooth is turn off!!!!). So, when this happens, the speaker and mic is disable because the unit "thinks" is connected to the Bluetooth Handfree profile.
Some user suggested that when the "no sound" issues occur, you can either soft reest or you can turn on/off your bluetooth and that will cure the problem for a while units it happens again.
What i did, i disable the entire bluetooth so that it will not load up on startup. Once i did that, the problem never did came back.
Procedures:
On root "Windows/StartUp" remove the file "Run_BTTrayCE" (same it somewhere else) then reset your unit.
Once the unit is reset, the bluetooth will not load on startup, that means the bluetooth is disable.
if you want your bluetooth to run again. you can either place the "Run_BTTrayCE" back on "Windows/StartUp" or to run the "BTTrayCE" in the Windows dir.
I hope some experts here can take this advice and see if they have any clue with what's going on..
BTW: Upgrading Radio Rom, or Bluetooth stack will not do anything so pls. don't waste your time on it.
I hope i have helped someone out there who is piss with this problem.
Derek
HappyGoat EDIT: I took a typo out of the title so it reads better, hope you don't mind...

Hey there!
I like your solution but I personally think it might be a bit overkill! I used to use the Bluetooth all the time on my XDAII but on my XDAIIs I only use it for my bluetooth GPS. I am going to try deleting the profile for my Bluetooth headset and see if that makes any difference (seen as I don't use it because the sound quality is terrible).
I'll post back with results!
Dom

@Derek, pls find my comment here: http://forum.xda-developers.com/viewtopic.php?p=118412#118412

Still dont work even take away the file!
Hi, I do it as you say
just cut and past the file into my Storage Card
and i do a soft reset
"No sound no voice " problem still exist
Should i just delete the file entirely instead of just cut and paste it some where?
I am afraid that i will loose this file forever therefore i save it on my storage card
i dont know if this going to be a problem?
Please help this problem make me sick for almost 5 days already

Umm, creamcream, there is no reason to worry. In the worst case scenario where you lose the file, you can just re-flash your rom, or ask another forum member to send you the file. I would gladly do so.
creamcream: Is your bluetooth disabled? And, if so, you are still experiencing the no-sound problem? Because if you are, then you have discredited this theory.

thanks the lastone
Hi, i solve the problem at this time
I just want to knwo how u update 1.40 rom?
is it stable?
Official?
I am worry that if that is not official it will be very dangerous for my Xda IIS
by the way is it fit for all model
such as
sx 66, ppc 6600 and Xda IIs
is it simple to do so?
can i have the link where to download thankyou "thelastone"

If you are planning on upgrading your rom to the current highest version, 1.40.00, then I recommend you check out wiki for instructions:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
If you do it properly, it is perfectly safe.

Re: Still dont work even take away the file!
creamcream said:
Hi, I do it as you say
just cut and past the file into my Storage Card
and i do a soft reset
"No sound no voice " problem still exist
Should i just delete the file entirely instead of just cut and paste it some where?
I am afraid that i will loose this file forever therefore i save it on my storage card
i dont know if this going to be a problem?
Please help this problem make me sick for almost 5 days already
Click to expand...
Click to collapse
Hi Creamcream
I just want to know when you move "Run_BTTrayCE" to your SD Card and follow by a soft reset. When you unit boots up, do you see the BT icon on the bottom right hand corner? If the icon is still there, that mean you haven't successfully disable your Bluetooth from startup.
Also, the other way to try it is try running your bluetooth manager. if your bluetooth is turn off, it will give you a errors message saying your Bluetooth fail to turn on.. somthing like that.
Pls let me know your result....
Derek

rcbear said:
What i did, i disable the entire bluetooth so that it will not load up on startup. Once i did that, the problem never did came back.
Click to expand...
Click to collapse
You don't need to disable BT completely,
it will be enought to disable Hands-Free service
in BT Settings/Services/Hands-Free/
uncheck: Enable service
and in Advanced menu
uncheck "Telephone calls" for sure

stachoo said:
rcbear said:
What i did, i disable the entire bluetooth so that it will not load up on startup. Once i did that, the problem never did came back.
Click to expand...
Click to collapse
You don't need to disable BT completely,
it will be enought to disable Hands-Free service
in BT Settings/Services/Hands-Free/
uncheck: Enable service
and in Advanced menu
uncheck "Telephone calls" for sure
Click to expand...
Click to collapse
@stachoo...wow, I hope this works for me..Ive just disabled the bluetooth using your method... will have to check the results...if this works for me then your a Lifesaver!!!!Tnx.

It has been almost 24 hrs since I disabled the hands free service... and I did about 5 calls, and until now I havnt experienced any "no sound" problem...I hope this is it!!!! Thanks!!! :lol:

GUYS
what about this problem :
The bluetooth turns off when you power off the screen ??

My findings so far:
If I keep Bletooth on all the time "nosound" never happens. At least not for about a week and did no softresets. However after some time something brakes regarding bletooth serial. The GPS thinks it´s online but nothing gets through. Closing and opening the serial port cures it momentarily. (This was with handfree services enabled). This never happend when I toogled Bluetooth on/off regulary.
Tried the trick to disable handsfree service yesterday but without unchecking "use handsfree for telephone calls". With Bluetooth turned off tonight the nosound reappeared, so just disable the main handfree service is not enough.
Have now also unchecked "use handsfree for telephone calls" and will report back if nosound occurs again.
(To the guy whos Bluetooth turns off: You probably have an old sw version where our nosound problem had not been introduced yet. 1.12.00 or soo...)

2 phat said:
stachoo said:
rcbear said:
What i did, i disable the entire bluetooth so that it will not load up on startup. Once i did that, the problem never did came back.
Click to expand...
Click to collapse
You don't need to disable BT completely,
it will be enought to disable Hands-Free service
in BT Settings/Services/Hands-Free/
uncheck: Enable service
and in Advanced menu
uncheck "Telephone calls" for sure
Click to expand...
Click to collapse
@stachoo...wow, I hope this works for me..Ive just disabled the bluetooth using your method... will have to check the results...if this works for me then your a Lifesaver!!!!Tnx.
Click to expand...
Click to collapse
Disabled BT handfree and unchecked "Telephone calls" yesterday but unfortunately the nosound bug hit anyway tonight.
The idea to disable the handsfree service was a nice one but no, it did not prevent the nosound bug to strike!
Back to my own solution that sofar has prevented the nosound bug: Keep Blutooth on all the time.

i have tested all this but the only thing that wrked was...
right guys I have been reading and trying but the only thing thats worked for ME was radio rom upgrade seriously. I have an SPV m2000, i have tried all ROM updates, and at the moment I am on is...
by the way I upgraded to radio version 1.12 but this never solved it so i went back to 1.10 which works,
ROM version: 1.40.00 WWE
ROM date: 03/10/05
radio version: 1.10.00
protocol version:1337.391
ExtROM version:1.31.124
I dont know but i managed to only install what I wanted of this (orange rubbish ext rom)
NOW FOR THE DOWNSIDE MY UNIT USED TO BE SOFT RESETTED EVERYDAY, but now i only reset very very LESS times, its definetly better than before I can vouch for that. BUT WE NEED SOMETHING SOLID.

Product recall????? :lol:

Such problem as creamcream has
I have no sound from speaker (only on incoming call - it rings)
But in all other cases it keeps silence.
Flashing new ROM doesn't helps too.
It didn't helps for me.
Nor Bluetooth disabling, nor Flashing.
You say that you solve that issue.
Sorry - but I don't understand how did you do it?
Answer please -
What to do?
Thanx in advance.

OK, just to say I'm having the same problem for too long time now. No sound on calls nor the other party can hear me.
I've opened another thread:
http://forum.xda-developers.com/viewtopic.php?t=44440
And, like I said there, I'm desperated.

Jeep UConnect Bluetooth Android 4.3 Issue with Fix - Just need help to Apply Fix

I just picked up a Note II from Sprint and it had 4.1 on it. I connected it to my Jeep Wrangler (2012 Unlimited) UConnect Radio (Model 130) and everything worked great when making a phone call. (I first this last friday tried a Note 3, but that wouldn't make calls at all from my jeep and Sprint said that they know and it might never be compatible, so I had to return it and swapped it out for the Note II on monday.)
The phone then upgraded to Android 4.3. Now I have a unique Bluetooth issue that I have exhausted searching for an answer to but cannot find one.
The phone will answer calls just fine through the UConnect radio, and it will make calls to some people just fine through the bluetooth. But when I call some people it will ring thought the speakers just fine, and then when they answer the UConnect radio announces "Call Ended." However the person is still connected and it still shows the bluetooth connected just fine in my action/notification bar and the headset button in the call is still highlighted green. But I have to hit the speaker button to speak top the people at that point. Again, this doesnt happen on every call so thats why I am confused.
I have found a solution however, and this is where I need the help of one of the superusers on here. (To preface this, I have read about 150 posts online about the Note 2 and bluetooth issues. I have deleted and repaired the phone from the Jeep UConnect and removed the Uconnect from the phone about 20 times. I have tried Bluetooth Auto connect, I have tried Tasker, I have tried disabling the media audio option, IU have tried bth allowing MAP and not allowing MAP. I have tried both allowing the phonebook and call history download and tried not allowing it. I have called Sprint...NO HELP, and I have called Jeep...NO HELP. Both Sprint and Jeep told me there were no firmware updates available to fix this (Jeep said they cant do firmware updates on my radio) and Sprint said there were no plans to fix this kind of bug in the future)
When the UConnect announces "Call Ended", I can drag down my top action/notification bar, click on the gear for settings, click on Bluetooth, then click on the UConnect gear for settings, uncheck the "Call audio Use for phone audio", and then re check it. Once this has been rechecked, the Uconnect picks back up the audio just fine and I can continue the call on the radio handsfree like it is supposed to be.
I live in CA where is is required to be handsfree so I really need a solution to not fumble with the phone for 10 seconds trying to make it do what it should do automatically. (Like my 4 year old Galaxy S2 did just fine).
I have tried tasker but cant seem to find a way to make it perform those steps I need.
My big question then is this... Is there an app or someone that knows how to write a simple app that would simply disable then re-enable the call audio checkbox under the Uconnect settings with the press of one button. or the press of an app icon from the home screen or something. Or has anyone seen this and knows of a fix?
Sorry for being long winded, just want to make sure the problem is clearly explained. I am truly at my wits end.
Thanks in advance for any help you can give, it is greatly appreciated.

So couple questions. Are you pure stock, got root, custom recovery?
Sent from my SPH-L900 using XDA Premium 4 mobile app

Sorry, guess I forgot that part.
I am pure Stock Sprint (Afriad to try a rom yet since my friend bricked his Note II)
Android Version 4.3
Android Model SPH-L900
Build JSS15J.L900VPUBMK4
Hardware Version L900.09
Kernel version 3.0.31-2106854

OK Google - No voice responses

Hi guys
Please help! I am a few days into my OnePlus 3 ownership and for most part I'm loving it! I have been a Nexus owner since the 4, with my last device being the 6P (unfortunately just a little too big to keep) and wanted a near vanilla OS device with great hardware in the form factor.
Besides the known bugs with Oxygen OS and the outdated phone apk which I wish had call blocking and local search/caller ID - any suggestions for a solution? The real issue for me is I get no voice responses to any of my OK Google voice commands. I am running the oxygen OS 3.2.1 update.
I only get responses in the browser / on screen. This is regardless of the command, what's the weather , what's the time in Tokyo etc or set a reminder, send a text to ... etc
Now I have done the following to troubleshoot:
1) Checked all related settings (speech output on etc)
2) Tried both uk and us English and ensured languages had been downloaded
3) Factory reset and tried again from restoring Google account
4) Factory reset and tried as a new phone with no Google account
Whatever I do there is no voice response. I will note during Google maps use if I ask a question I get a response.
OnePlus support offer nothing but an RMA which of course is probably no the solution it must be a setting or a software bug.
Can fellow owners check if they have the same issue and if they have a solution, kindly share it?
Many thanks

Facing same issue but no solution yet

Adpbtn said:
Facing same issue but no solution yet
Click to expand...
Click to collapse
Thanks for responding Adpbtn! Really hope a member has a solution to this

My first op3 was defective. Same issues with the mic. (besides phone calling)
Don't waste your time guys., you have to return device.
Sorry.

I think it only works on Google launcher home screen and any screen while phone is on (if activated under settings). It will not work while screen is off. Correct? Or are you referring to something different?
Sent from my ONEPLUS A3000 using XDA-Developers mobile app

avetny said:
My first op3 was defective. Same issues with the mic. (besides phone calling)
Don't waste your time guys., you have to return device.
Sorry.
Click to expand...
Click to collapse
Thanks for this, to be clear are you saying you had the same problem, voice commands via 'OK Google' were working but the response was only on screen? But your replacement phone works fine and you get audio responses/'OK Google' talks back?

martinezma99 said:
I think it only works on Google launcher home screen and any screen while phone is on (if activated under settings). It will not work while screen is off. Correct? Or are you referring to something different?
Sent from my ONEPLUS A3000 XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks for your response, I am referring to the fact the phone doesn't talk back. No voice response when asked a question. 'OK Google' works from any screen when the phone is on (and you choose the setting) but whatever you do the answer or response is on screen only, no answers are spoken back.

I have the exact same issue, it was working when I received the phone. But since 4-5 days it has stopped responding back, it just shows the answers on screen.
Good to know that I am not the only one facing this problem. I hope it is just a software bug and will be fixed soon.

i am saddened because of this as well! I used to ask Google Now about the weather, time, to set the alarm and the talk-back is a great feature to
me, just that now my OP3 has lost this capability !!! I've already googled for a while, a few are questioning same problem but no resolution!

Wow, it got fixed automatically after so many days. I was just setting a reminder and it replied with voice, so I tested other commands too, like weather, time and other stuff. It is working properly for me now, please check if it's fixed for you too. (I didn't update to 3.2.2 yet)

I've had this phone for almost a week and have had the same issues. Tried clearing cache, reinstalling Google, changing settings and nothing worked. All of sudden it started talking back to me yesterday. So there is hope.

FateWeaver said:
Wow, it got fixed automatically after so many days. I was just setting a reminder and it replied with voice, so I tested other commands too, like weather, time and other stuff. It is working properly for me now, please check if it's fixed for you too. (I didn't update to 3.2.2 yet)
Click to expand...
Click to collapse
Hi FateWeaver, I updated to 3.22 and this is now fixed!!! That's the solution guys at least it was for me, install the oxygen os 3.22 update! So happy OnePlus are delivering fixes so quickly!

Help Please - CarExc PX6 - No AutoKit/CarPlay APK working?

Hi all,
I recently purchased a CarExc PX6 from AE Everything works great besides the unit did not have a CarPlay/AutoKit APK/Module installed.
I've tried searching for a couple of different options but no luck with one that connects to my phone. I either get a "Product not authorized" message or once updating the unit crashes or freeze's each time opening. Without the module the USB transmitts power to my phone so its strictly a software issue.
Has anyone had any luck with a good .APK/Module for these CarExc headunits?
Many Thanks

Cant you just download an autokit apk from the internet? Some where on reddit there is a february version of the autokit i advise you to use that one and dont update it.
I bought a official carlinkit wireless version from amazon (the global online store of carlinkit) i installed the apk from there site at first every thing worked fine but after that i tought i need to update the software as i had a weird graphical glitch with volume up/down. So i updated it with in the app to the latest version. Should have never done that, i also get the same issues you have, and i bought it at there offical store at amazon. Any way its still very buggy the carlinkit i have for CarPlay. Its not reliable, and doesnt work flawlessly..

Not an MTCB, what is the unit? Posting in the right forum might yield better results/replies

Question WiFi problems after update to 62.0.A.3.163

Hello.
After update to 62.0.A.3.163 (about week ago) I have problems with WiFi connection:
Once/twice a day phone loses WiFi connection and then:
a) it does not see saved WiFi connection (other SSIDs are searchable) still being in range of it - here it helps to switch off and on again the WiFi option in Settings;
b) and sometimes it does not see any WiFi SSID (search list is empty) - here only restarting the phone helps.
I've already tried to:
- disable/enable "Turn on Wi-Fi automatically" setting;
- switching "Use randomized MAC" to "Use device MAC" in settings for saved WiFi SSID;
- disable/enable "Wi-Fi scan throttling" in "Developer options";
- perform "factory reset".
All of that did not help to solve the problem.
Does anyone have this kind of WiFi problem on 62.0.A.3.163?
PS. I had no WiFi problems on system version 62.0.A.3.70.

user616702 said:
Hello.
After update to 62.0.A.3.163 (about week ago) I have problems with WiFi connection:
Click to expand...
Click to collapse
After upgrade I could not activate wifi at all, but restart helped so far.
I suggest You to contact with the Sony support.

ksuuk said:
After upgrade I could not activate wifi at all, but restart helped so far.
I suggest You to contact with the Sony support.
Click to expand...
Click to collapse
Thx.
Request to Sony support sent and waiting for them to replay.

The support suggested to make "software repair" with Xperia Companion and... it did not helped.
Second suggestion was to contact local authorized repair center what I'm about to do next...

I had the same issue, and I also contacted support. While waiting for an answer though I started inspecting some of the more recently installed apps and after removing a few of them the issue seems to be gone. I say seems, because I would need a couple days to verify it for sure.
Do you by any chance have any of the following apps?
- kiss launcher
- simple calculator
- simple media player

bserem said:
Do you by any chance have any of the following apps?
- kiss launcher
- simple calculator
- simple media player
Click to expand...
Click to collapse
Nope.

Well then, I guess you'd have to try and uninstall some apps and see how it works for you.
I'd start with apps not installed from google-play, like YT Vanced, F-droid stuff etc.
Do you by any chance have Youtube Vanced? I also updated it to the latest version yesterday, might be related.

bserem said:
Well then, I guess you'd have to try and uninstall some apps and see how it works for you.
I'd start with apps not installed from google-play, like YT Vanced, F-droid stuff etc.
Do you by any chance have Youtube Vanced? I also updated it to the latest version yesterday, might be related.
Click to expand...
Click to collapse
I had this Wi-fi problem still after "software repair" and without installing any additional apps after initial setup, so...
Today I'm sending my phone to the repair center.

Well, I also reported this, so hopefully they will fix it in a new firmware.
I am hesitant to send it to repair because it will be weeks before I get it back.

user616702 said:
After update to 62.0.A.3.163 (about week ago) I have problems with WiFi connection:
Click to expand...
Click to collapse
I don't know is this related, but now phone logs are flooded with messages:
Code:
avc: denied { find } for pid=5908 uid=10328 name=tethering
scontext=u:rermissioncontroller_app:s0:c72,c257,c512,c768
tcontext=ubject_r:tethering_service:s0 tclass=service_manager permissive=0
After restarting the phone, no such logs, but when I just toggle wifi off/on, the flooding starts again.
So I also sent a complaint to support.

ksuuk said:
denied { find } for pid=5908 uid=10328 nam
Click to expand...
Click to collapse
ksuuk said:
I don't know is this related, but now phone logs are flooded with messages:
Code:
avc: denied { find } for pid=5908 uid=10328 name=tethering
scontext=u:rermissioncontroller_app:s0:c72,c257,c512,c768
tcontext=ubject_r:tethering_service:s0 tclass=service_manager permissive=0
After restarting the phone, no such logs, but when I just toggle wifi off/on, the flooding starts again.
So I also sent a complaint to support.
Click to expand...
Click to collapse
Great Job, thanks. I also got the problem, just as I changed my router xD I thought it was the problem. Anyway I don't think sending phone to repair centre could be the right choice. It's a bug that will be solved in future updates I hope.

user616702 said:
I had this Wi-fi problem still after "software repair" and without installing any additional apps after initial setup, so...
Today I'm sending my phone to the repair center.
Click to expand...
Click to collapse
Any news? Support suggest to me also to perform a software repair, but I don't want to do it (I have no interest nor time to reinstall/restore all my settings/apps) and like You said, it's also pointless.

ksuuk said:
Any news? Support suggest to me also to perform a software repair, but I don't want to do it (I have no interest nor time to reinstall/restore all my settings/apps) and like You said, it's also pointless.
Click to expand...
Click to collapse
Yes, "software repair" did not helped for me.
At repair center the motherboard was replaced - it did not helped neither.
I've decided to send it back to the shop for refunds.

user616702 said:
Yes, "software repair" did not helped for me.
At repair center the motherboard was replaced - it did not helped neither.
I've decided to send it back to the shop for refunds.
Click to expand...
Click to collapse
There's nothing that needs to be repaired, either hardware or software.
We just need to wait for an update or stay on the older firmware. Although I don't have the WiFi problems on .163 firmware and gsi rom.

lufei said:
There's nothing that needs to be repaired, either hardware or software.
We just need to wait for an update or stay on the older firmware. Although I don't have the WiFi problems on .163 firmware and gsi rom.
Click to expand...
Click to collapse
If either hardware or software needs to be repaired, then what update are You waiting for? Are You hoping that Sony sends You free new phone?

user616702 said:
Yes, "software repair" did not helped for me.
At repair center the motherboard was replaced - it did not helped neither.
I've decided to send it back to the shop for refunds.
Click to expand...
Click to collapse
Based what are You asking refunds?

ksuuk said:
Based what are You asking refunds?
Click to expand...
Click to collapse
Phone is not working as it should and repair did not helped.

user616702 said:
Phone is not working as it should and repair did not helped.
Click to expand...
Click to collapse
Well, based this, every windows owner should get refund.
But as far I know, software issues are not the refund base.

ksuuk said:
Well, based this, every windows owner should get refund.
But as far I know, software issues are not the refund base.
Click to expand...
Click to collapse
My phone is on the way to the shop, I'll write update after they respond-to/close the RMA.

ksuuk said:
Well, based this, every windows owner should get refund.
But as far I know, software issues are not the refund base.
Click to expand...
Click to collapse
I use Linux but the laptop came with a Windows license. I'd love to get back the M$ tax.