Develop Bugs

[ROM][AROMA][Find7a] MaKulayOS ROM with unified storage

MaKulayOS v1.1 based on ColorOS 2.0.2i Beta - with unified storage support.
Changelog: -- September 19, 2014
- updated base to Color OS 2.0.3i Beta
- added option to install Xposed Framework and some modules
- re arrange installer menus (changelog and exit installer now in main menu)
Changelog: -- August 30, 2014
- base on Color OS 2.0.2i Beta
- set to install OPPO Launcher from 2.0.1i (2 layer)
- fixed SuperSU root permission (fixed bug in Titanium backup and other root apps)
- WITH ALL THE FEATURES OF KULAYOS ROM(UP TO VERSION 2.3)
Instruction to install:
Instruction 1 - When you already done doing the unified tool
Just flash this ROM with a modified recovery (TWRP) that supports unified storage.
Instruction 2 - When you come from KulayOS or stable ColorOS.
Instruction from Official OPPO thread with install.bat modified by me to include in the installation the modified TWRP.
Steps to install unified support:
1. Install MaKulaOS using your current recovery (recommended TWRP 2.7.1.0)
2. Backup everything on your phone storage including photos, music, videos etc (they will all be lost if you don't).
3. Power off your phone
4. Press Power+Volume up key at the same time to enter fastboot
5. Download the attached tool and run Install.bat in your computer
6. Connect your phone with the computer
7. Wait until the operation is finished, this will take 4-5 minutes
8. The phone will reboot when re-partition is finished, wait until the OPPO logo appeared then disconnect your phone
Special Thanks:
Special thanks given to @Coldbird who developed this partition tool.
Click to expand...
Click to collapse
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
MIRROR
Please donate if you like my work.
XDA:DevDB Information
MaKulayOS, ROM for the Oppo Find 7a
Contributors
tantrums
ROM OS Version: 4.3.x Jellybean
Based On: Stock ColorOS 2.0.2i Beta
Version Information
Status: Beta
Beta Release Date: 2014-08-31
Created 2014-08-31
Last Updated 2014-09-20

Can flash on find 7s?

Can't wait to try this, thank you!
Sent from my Find7u running Unified Gummy using Tapatalk Pro

Thanks Bro greetings from Turkey

No matter what rom I change too and all the lovely features of DU, and Aosp... I always find myself returning to KulayOS... But now, I tried for the forth time with no success to download, error around 35/40% thru .. Any mirrors??

Successfully flashed on a find 7 9076

if someone is tested unified storage , all right?

coki4 said:
if someone is tested unified storage , all right?
Click to expand...
Click to collapse
Yes, I tested and is OK.
Generally, I have no errors, ROM is great.

I also can confirm that unified storage is working.

Does this version have custom kernel ?

No, stock kernel only.

thx but i remember have read on Lastest Kukay (based on 1.2.5i) integration of PAC perf app who include for me a custom kernel feature...

Yes, PAC app is onboard.

I don`t have unification.
Can i just simply install this rom?

Then i can suppose original kernel is a bit modified...

Is there anyway to get oppo music search built into the music app like in ColourOS 2.0

Working perfect on my x9076..thanks

Mord0rr said:
I don`t have unification.
Can i just simply install this rom?
Click to expand...
Click to collapse
Yes, I unified after installing the rom and everything ran just fine.

lesscro said:
Then i can suppose original kernel is a bit modified...
Click to expand...
Click to collapse
PA app is just an app. Kernel is OPPO stock.

Pretty strong on screen time for a rom based on 2.0.x.. Excellent rom.. Some tweaks needed for deep sleep tho

Custom rom for Vivo 3S (extHiFi)

Two custom roms for Vivo 3S (X520L) rooted:
Based on latest original chinese rom 6.9.3 (android 4.4.2 KitKat):
extHiFi_PD1303_6.9.3.zip
Languages: english, ไทย, 中国, русский
Based on latest international ROM 3.7.0 (android 4.4.2 KitKat) :
extHiFi_PD1303F_EX_3.7.0.zip
Languages: english, malaysia, bahasa indonesia, ไทย, 中国, русский
Support many apps in Hi-Fi mode.
VivoCamera work with right folder (/DCIM/).
Input method Swype for vivo by default.
Correct GPS and Glonass for european region. Correct time zones (version 2015i).
Include the google services.
Fast, estable, rooted, better sound quality, faster Wi-Fi.
HOW TO INSTALL
1. Make sure you have a custom recovery ( chinese recovery), because this is a custom ROM
2. Enter to chinese recovery. (Hold and press the volume up key + power key together about 10 second)
3. Full wipe. (Wipe user data/factory reset) (Warning!!! will clear all user data)
4. Install extHiFi Rom (Install zip from / sdcard)
5. Reboot phone (reboot system now)
see more...

Link for download: extHiFi_PD1303_6.8.2.zip

Hi,
I was following your thread on vivoforums.com. Website seems to be down.
I have installed your RoM but after a whole newly installed Xposed modules do not seem to activate even though they are ticked in xposed app. Any ideas?

anaschillin said:
Hi,
I was following your thread on vivoforums.com. Website seems to be down.
I have installed your RoM but after a whole newly installed Xposed modules do not seem to activate even though they are ticked in xposed app. Any ideas?
Click to expand...
Click to collapse
Need to change installation mode to "Recovery (flash zip)". And enabled"Disabled resource hooks". Because vivo lock resources.

Custom Rom based on international Rom. Rooted.
Link: extHiFi_PD1303F_EX_1.19.0.zip

Post updated.

how to wipe and instal this rom
my vivo xplay 3s version is
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so i have to install this version? i'm still confuse how to wipe and install the file (New ROM)...can you explain more?
this rom upgrade to kitkat?

blacknikon:
In my post two roms.
extHiFi_PD1303_6.9.3.zip - Rom based on chenese version, android 4.4.2 (KitKat).
extHiFi_PD1303F_EX_1.19.0.zip - Rom based on international version 4.3 (Jelly Bean).
You have original international ROM 1.19.0.
If you want to have android 4.4.2 (KitKat), you may flash extHiFi_PD1303_6.9.3.zip. But this ROM does not have indonesian language.
If you decide to flash, you must first install flash custom recovery.

How to get custom recovery.
1. Download two firmwares 1.25.9 and 1.21.5. And download recovery.img from folder 2.0vivo.
From: https://mega.co.nz/#F!axh1kQTA!bmx86vN_ZgnZafWutIfltw
2. Place downloaded into Xplay 3s sdcard
3. Download VRoot.
From: http://www.mgyun.com/vroot
4. Downgrade you system to 1.25.9 from File manager or stock recovery.
(Install downloaded zip archive 1.25.9)
5. Then downgrade you system to 1.21.5.
6. Enable USB Debugging in dialpad *#*#7777#*#*
7. Conect USB-cable to PC and wait VRoot detect the phone
8. Click Green button in VRoot program (ROOT) and wait when rooted.
9. Reboot phone.
10. Instal Flashify from Play Store.
11. Install recovery.img (downloaded from folder 2.0vivo!!!) from Flashify.
12. You have root and custom chinese recovery. Download extHiFi rom and install from recovery.
see more...

Thanks for your information ...:thumbup::thumbup::thumbup:
Sent from my vivo Xplay3S using XDA Free mobile app

How to add app to Hi-Fi list?
Awesome! How can I add Spotify to the list?

[ROM][UNOFFICIAL]AICP Oreo for Mix 2 (chiron)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
>> AICP Oreo <<
>> Rom For Mix 2 (chiron) <<
Initial Stable Build ​
What Works:
Same as RR Oreo.
Bugs:
-First boot it says outdated vendor image,but everything works fine!
-You tell me.
Download:
aicp_chiron_o-13.1-UNOFFICIAL-20180402.zip
GApps (You need ARM64 8.1)
Screenshots:
Frequently Asked Questions + Useful info:
- The first boot will always be slow. This is because once you enter your google account details it starts updating the google apps and your personal details, while downloading your own applications as well
- The rom does not include MIUI own services and user interface,its include AOSP systemui.
- The rom NOT is rooted by default so use Magisk zip installer package.
- After first boot, turn off NFC (or at least try to remove the check from the checkbox, it will not be possible due to a bug), then reboot the phone. After this you will be able to turn it on/off as per usual.
- The rom contains TWRP recovery (power+volume up=TWRP)
- To enable "Developer Tools" menu options, navigate to "Settings->About Phone" and tap "Build number" 4-5 times
- It is not possible to update a rom OTA, only from recovery. The method of updating the rom is the same as installing it from step (3), the only difference is that the "-d: wipe data/factory reset" part needs to be skipped
- You can make the Google search bar disappear from the home screen by opening the settings menu of the Trebuchet launcher via long press. Then expand the advanced settings by swiping up the grey bar of Wallpapers Modules Themes. Here look for the Search bar and switch it off.
Source codes:
AICP
Device tree:
chiron Source Code
Credits:
-NexXuSKa
-Arasthel
-andr68rus
-Mix 2 AOSP Development Team
Sorry for my bad English!
XDA:DevDB Information
[ROM][UNOFFICIAL]AICP Oreo for Mix 2 (chiron), ROM for the Xiaomi Mi Mix 2
Contributors
NexXuSKa, arasthel, andr68rus
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked Bootloader + TWRP installed
Based On: AICP
Version Information
Status: Stable
Created 2018-04-04
Last Updated 2018-04-04

good!

nice work

is this a maghiarii language? )

machiavelly said:
is this a maghiarii language? )
Click to expand...
Click to collapse
Yeayea

THX

good job man!

Nicely done, thank you!

Hi all...
When trying to install the Rom, it says that "the file is corrupted" in red color letter.

My favorite ROM! Thank you guys

ampelift said:
Hi all...
When trying to install the Rom, it says that "the file is corrupted" in red color letter.
Click to expand...
Click to collapse
Download again

ampelift said:
Hi all...
When trying to install the Rom, it says that "the file is corrupted" in red color letter.
Click to expand...
Click to collapse
Try redownload zip file. Anyway i will push an update today!

Thank for your rom
I can`t flash
When I flash your rom and reboot my device go to fastboot auto all time.

Call me IX said:
I can`t flash
When I flash your rom and reboot my device go to fastboot auto all time.
Click to expand...
Click to collapse
Same here.

kremmit said:
Same here.
Click to expand...
Click to collapse
For me to, what the problem?

this rom will it always be updated?

Official AICP for Chiron http://dwnld.aicp-rom.com/?device=chiron

sergtot said:
Official AICP for Chiron http://dwnld.aicp-rom.com/?device=chiron
Click to expand...
Click to collapse
I noticed it this morning but had bootloops in the setup menu.

CrazyBeaver2377 said:
I noticed it this morning but had bootloops in the setup menu.
Click to expand...
Click to collapse
Bootloops or sudden reboots?

sergtot said:
Bootloops or sudden reboots?
Click to expand...
Click to collapse
rom booted fine at first but got soft bootloop when going through setup.

[ROM][9.0] Official HashOS

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official build at: https://download.hash-os.com/gemini
Our Gerrit: https://gerrit.hash-os.com
Build will be done every Saturday.​
Kernel Source: android_kernel_xiaomi_msm8996
XDA:DevDB Information
[9.x] Official HashOS, ROM for the Xiaomi Mi 5
Contributors
enzoo96
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: 8.8.30
Version Information
Status: Beta
Beta Release Date: 2018-09-22
Created 2018-09-22
Last Updated 2018-09-22

Reserved

Reserved

Thanks very much for your great job

nice...
btw where i can find this ROM's features?

Thanks alot @Is Ouzz

wow, another pie rom. nice dev

excuse the newsbee question, but does the rom contain the updated firmware inside ?. I have the MIUI 10.0.1.0 Global stable (I do not know what firmware mounts), can I install this HasOS via twrp without installing other firmware? if not where I find the firmware 8.8.30. thank you for your reply and above all, thank you for your work!

albertogar said:
excuse the newsbee question, but does the rom contain the updated firmware inside ?. I have the MIUI 10.0.1.0 Global stable (I do not know what firmware mounts), can I install this HasOS via twrp without installing other firmware? if not where I find the firmware 8.8.30. thank you for your reply and above all, thank you for your work!
Click to expand...
Click to collapse
you can find the firmware files here:
https://sourceforge.net/projects/xiaomi-firmware-updater/files/Developer/
choose Gemini and the fw zip with GLOBAL in filename.
just flash it before flashing the ROM

Rod160 said:
you can find the firmware files here:
https://sourceforge.net/projects/xiaomi-firmware-updater/files/Developer/
choose Gemini and the fw zip with GLOBAL in filename.
just flash it before flashing the ROM
Click to expand...
Click to collapse
thanks a lot, I did not know this site where to find the firmware. So I enter twrp, I wipe, install the firmware, install the rom, root and gapps and reboot. correct?

screenshot please

Thank you for new rom.
I Installed it, it`s working good enough for early versions of Pie. Things i would like to see improved in next build:
1) Splash screen animation while booting is not rotating properly
2) In special HashOs`s setting menu there is Buttons section, but Swap hardware buttons is in different part of settings. Duplicate "swap hardware buttons" in hashos`s settings?
3) fps of animations is not consistent

nebik said:
Thank you for new rom.
I Installed it, it`s working good enough for early versions of Pie. Things i would like to see improved in next build:
1) Splash screen animation while booting is not rotating properly
2) In special HashOs`s setting menu there is Buttons section, but Swap hardware buttons is in different part of settings. Duplicate "swap hardware buttons" in hashos`s settings?
3) fps of animations is not consistent
Click to expand...
Click to collapse
Hello, for bootanimation it's just temporary. For swap hardware buttons it's device features not hashos features, so it's normal.

AWSOME!!! This one is the real rom build with heart and passion. Thanks Dev...
Many unique features that not available on other rom.
Even I noticed some features still not working properly.
If I get your permission, let me explain what I get.
1. There in double dt2w settings in "display" and "device feature" what is different?
2. We cannot disable dt2w. Already turn off these 2 setting in 2 place, and restart. But dt2w still trigerred.
3. Dt2w not check proximity, so it annoying when phone in pocket.
4. Pixel launcher fc (installed from stock opengapps).
FYI, it happen on unofficial Los 16 too, but not in other one pie rom.
5. It's better when reset pulldown menu, it will reset column and row too. (Now only icon that reseted)
Many thanks Dev... I will stick with this rom...

Hello,
I can not install the rom, I can only install the "lineage", I have populated it in all possible ways, it always stays in the logo.

After flash rom stuck in bootanimation logo. Please tell me for install this rom

pepejemjem said:
Hello,
I can not install the rom, I can only install the "lineage", I have populated it in all possible ways, it always stays in the logo.
Click to expand...
Click to collapse
Latest fw and latest recovery?

yes,
The funny thing is that if I can install "LINEAGE 16" without any problem.

To whoever tried this rom, how's the battery drain?

I got a bootloop on latest build , firmware I use is 8.8.30

Question POCO F3 no update to MIUI13 EU.

Hello,
It's some time after Miui 13 release but I have still no update. Phone is locked, no root so I thought I'll get a Miui 13 OTA update but I did not get any. I checked regions like, Poland (my), Germany, India etc. but still nothing. Any help?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT:
I want to update from phone, so should I download version V13.0.8.0.SKHEUXM or V13.0.6.0.SKHMIXM to place it on my device and run the manual update?
Or better still wait?
EDIT 2:
Tkanks to @NOSS8 i know that I should use V13.0.8.0.SKHEUXM but start with V13.0.3.0.SKHEUXM why? If i'll install V13.0.8.0.SKHEUXM on my present MIUI12 it will brick or what?

Evendi01 said:
Hello,
It's some time after Miui 13 release but I have still no update. Phone is locked, no root so I thought I'll get a Miui 13 OTA update but I did not get any. I checked regions like, Poland (my), Germany, India etc. but still nothing. Any help?
EDIT:
I want to update from phone, so should I download version V13.0.8.0.SKHEUXM or V13.0.6.0.SKHMIXM to place it on my device and run the manual update?
Or better still wait?
EDIT 2:
Tkanks to @NOSS8 i know that I should use V13.0.8.0.SKHEUXM but start with V13.0.3.0.SKHEUXM why? If i'll install V13.0.8.0.SKHEUXM on my present MIUI12 it will brick or what?
Click to expand...
Click to collapse
It is preferable to follow the logical sequence, in this case the dates of updates. But you can try the latest directly without risk.
Note that this does not always work 100%.
And why have posted the global version that you will not be able to install.
V13.0.8.0.SKHEUXM or V13.0.6.0.SKHMIXM

You seem to be using a custom ROM. Maybe that's why you aren't receiving updates.
I would suggest you to read about Anti Rollback Protection before you do anything.

user0u said:
You seem to be using a custom ROM. Maybe that's why you aren't receiving updates.
I would suggest you to read about Anti Rollback Protection before you do anything.
Click to expand...
Click to collapse
Its rom is stock and A.R.B,as indicated by his name, is for downgrade not for update.

miui 12.5 global poco f3 max version 12.5.6.0 at stock rom not written like that but
from what i know, you can not lock bootloader with costum rom installled.
if you want to try update manual, you can directly download 13.0.8.0.

potan said:
miui 12.5 global poco f3 max version 12.5.6.0 at stock rom not written like that but
from what i know, you can not lock bootloader with costum rom installled.
if you want to try update manual, you can directly download 13.0.8.0.
Click to expand...
Click to collapse
Did you read?
no root,bootloader locked.
"miui 12.5.8 designed by pramod phuyal"
it's a theme, that's all.

tap on big "12" (upper left side box) to enter update options.
then tap multiple times on the big "12" to enable more options.
now tap on 3 dots and chose "download last firmware"
this should download latest firmware for your phone (V13.0.8.0.SKHEUXM)

NOSS8 said:
Did you read?
no root,bootloader locked.
"miui 12.5.8 designed by pramod phuyal"
it's a theme, that's all.
Click to expand...
Click to collapse
yes i did.
what if it is simply because there is no magisk app and device verified in google play store "about".
hey, what a "theme" even that place changed.
if it's like that.
then download 13.0.8.0 or
download 13.0.7.0 if any, after that 13.0.8.0 if want to update manually in updater by "choose update package" with logical sequence since 13.0.6.0 and below from miui 13 will result "can't verify update"
if want to do it with very "sequence" from the very first miui 13 for poco f3 you can use mi phone assistant reboot to recovery after that you can read here about mi phone assistant work even bootloader locked.

Just flash v13.0.8 ZIP through MIUI Updater

Hi
I utilize an outside screen by means of the USB C port (usb C/HDMI link), it functions as promoted (Samsung Dev X,...)
I would like a USB C port replicator that permits outside screen + Power tablet power supply (I viewed as one, yet it no longer works for the outer screen)
Do you have a model to prescribe to me?

Sucess . I have MIUI 13 but the problem was... MIUI Updater app version. After uninstalling updates it did work fine (OTA).