Develop Bugs

[Q] Need Help Im stuck my Ascend P6 fail after try install TWRP

Hi everybody,
I was trying to install a version of Android 4.4 in my new Ascend P6 but all that I tried to do fail, now I try to install TWRP following this post:
http://forum.xda-developers.com/showthread.php?t=2709607
when I tried to INTALL TWRP JELLYBEAN RECOVERY it show the next message:
FAILEDremote partition 'recovery' not support flash)
Ohhh a problem but I made a mistake because I tried all the options and when try the option
INSTALL OMNI KITKAT BOOT.IMG it leave and install sucesfull and my phone don't start only show the first screen and reboot again and again I tried to enter to recovery mode and it leave me but when I tried to install OMNI Rom through this part the phone show this message:
error invalid ota package missing scatter
I don't know what to do please help me I'm worry because now the battery is out and when I tried to charge it, it only reboot and reboot again and again and now don't leave me enter to recovery mode.
Thanks.

Steps to-do
Hey,
you might find a solution here. What I would first try is to go into Fastboot mode. Then I would flash the stock recovery ( Jelly Bean[4.2] or Kit Kat[4.4] ). Afterwards i would download the firmware you want, put the update.app in your dload folder on your sdcard and flash it over stock recovery.
So 1. step:
Entering Fastboot mode with the help of the buttons on your phone
Press and hold VOL - and POWER button and your phone will enter fastboot mode
Click to expand...
Click to collapse
2. step:
What is stock recovery IMG ?
Depending on what firmware you want to install, Jelly Bean or KitKat, you have to install the correct stock recovery.
You can find a complete guide here
Download links for the images:
Here is the link for the JB stock recovery IMG (B118) and
Here is the link for the KK stock recovery IMG
Click to expand...
Click to collapse
3. step:
Download links for firmware
Android 4.2 Jelly Bean B112
Android 4.2 Jelly Bean B125
Android 4.2 Jelly Bean B132
Android 4.4 KitKat B506
Android 4.4 KitKat B507
Android 4.4 KitKat B510
Android 4.4 KitKat B511
Android 4.4 KitKat B512
Android 4.4 KitKat B513
Click to expand...
Click to collapse
4. step:
Preparing the firmware for flashing
Unzip you downloaded firmware and put the UPDATE.APP file into the dload folder of your sdcard. If you don´t have a dload folder you should create one.
Click to expand...
Click to collapse
5. step:
Flashing the firmware
Press the POWER, VOL + and VOL- Button simultaneously and hold them until you see something like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then everything should install and your firmware is flashed on your phone.
Click to expand...
Click to collapse
I hope this helps, if not you can ask .

Hi, also make sure your bootloader is unlocked you could also use that tool to do it, but rather look near the top of that linked post and download his newer software

[RECOVERY][P6S-U06][Unofficial TWRP Recovery 3.0.3-0]

Hi everyone.
Here's my build of TWRP for P6S-U06.
Features:
Supports USB OTG, so you can use USB flash drive as external storage for backups, zip installations.
Because device doesn't support external SD card, I've added feature to make backup of internal storage (to USB flash of course).
Combined with stock EMUI 3.1 recovery. In case of power-on by holding power + vol+ or rebooting into recovery by command or any 3rd part application: will boot in TWRP. In case of local update, OTA-update, "force update" (3buttons method) or factory reset: will boot into EMUI recovery.
Off-mode charger updated from EMUI 3.1
custom.bin and cust symlinks are saved/restored (if they were exist) in case of Wipe/Format Data. So there not gonna be "cust" issues after factory reset in TWRP.
Requirements:
Unlocked bootloader
Android 4.4.2 - 5.1.1
Installation:
Reboot in fastboot mode
Flash image via fastboot
Code:
fastboot flash recovery TWRP_Recovery-3.0.3-0.img
fastboot reboot
From TWRP: Press "Install" and select zip-archive
Notes:
Because internal storage is not a separate block device and just a subfolder of "userdata" partition, before you can make backup/restore of internal storage, first you should do Mount -> Data.
It will not work on P6, it's for P6S only.
Download: TWRP_Recovery-3.0.3-0.img
For TWRP: TWRP_Recovery-3.0.3-0.zip
Previous:
Download: TWRP_Recovery-3.0.2-0.img
For TWRP: TWRP_Recovery-3.0.2-0.zip
Download: TWRP_Recovery-3.0.0-0.img
For TWRP: TWRP_Recovery-3.0.0-0.zip
TWRP_Recovery-2.8.5.0.img

Is it possible to get this new version for our beloved P6?

tileeq said:
Is it possible to get this new version for our beloved P6?
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=539568&view=findpost&p=37725285
If you can't download from 4pda, ask for the author of build, here is also here on XDA: Razziell

Hi Kosyan, how to roll back to stock recovery?
Thanks
Edit: I know how rollback but in 4pda is it not possible to download the stock recovery I need!
Can you post it hier please?

Can you please share TWRP 2.8.7.0 material design by Razziell? I can't login on 4pda.ru because of a Russian captcha!

@Kostyan_nsk, could you send me a link to your device tree please. Want to check something out real quick.

I wasn't upload my dt. I'm too lazy for this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PM me what exactly are you interested in?

WHat if i have android 4.2.2 ?? is it gonna work ?

kye04 said:
WHat if i have android 4.2.2 ?? is it gonna work ?
Click to expand...
Click to collapse
No, it will not boot.

THANK YOU !!!
Tell you my story : a week ago i bought a P6S-U06 from aliexpress. It came with the 4.2 system. Interesting was that there was no update , not by wifi nor by Hisuite.
And i wanted to update to 4.4 And i try all kind of recoveries and boot.img untill i bricked it.... Actually i got the bootloader locked and i can not flash anytrhing anymore.....
Now i bought a second P6S-U06 that came with 4.4 . Thanks to your twrp, now i have twrp on my phone.
Please help me also with a nice kernel and a nice rom. I found some stuff on 4pda forum but i do not know russian and i cannot make an account to download .
If you do not want to post here, please send them in privat.
Once again , THANK YOU !!!
My phone is now TWRP with P6S-U06V100R001C17B606 .

Hi .I have 2 P6S-U06 . Both of them 4.4.2 In one of them i flashed thru fastboot and twrp works perfect.
The other one simply does not accept that. see attached picture .
I forced it installing Flashify . I wrote the recovery with it. After reboot, the leds start blicking red and green and after that a screen appears saying something happened sith my boot, press power button for 6 seconds. I turn off the phone , restart it, it boots to system but stock recovery...
How is this possible ?
WHat can i do ?
Also is there a 5.1.1 image that can be updated as update.app in dload folder ?

CUBOT S550 5,5 HD MT6735 1,3Ghz 2gb/16gb fingerprint 3000mAh

Tomorrow i will receive this new Cubot series with fingerprint and good specs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official Page:
http://www.cubot.net/Index.php/mobile/view/id/263.html

Reserved for review and modding

Cubot claim that it has a 3000mAh battery.
Battery mAh measured to 2795 here http://peecee.dk/uploads/012016/20160123_204834.jpg
Geekbench 3 battery test: http://browser.primatelabs.com/battery3/197467 (09:35:40 / 3589)

thanks S7yler , not bad, also battery test seems to be very good!
I wait if from EFOX, and i hope to have mine today or tomorrow!

Just Arrived.. .white color in my sample!
first challenge was to create TWRP .. successfull!
http://www.needrom.com/download/twrp-2-8-7-3-material-play-megthebest/
Archive contain Boot Unlocked and TWRP Material Play ported by me!
Tested successfully with V06 January 2016 rom.
1- Download and Install correctly Mediatek Preloader drivers
( Take care on Windows 8.1/10 drivers, you need to disable driver signature before install
https://www.youtube.com/watch?v=50pD0mONm44
http://laurentiumihet.ro/technology...-for-32-64-bit-drivers-installation-tutorial/
https://thebroodle.com/microsoft/windows/install-mediatek-mt65xx-usb-vcom-drivers-windows-8-8-1/
2- enter Engineering Mode MTK with Dialer code *#*#3646633#*#*, go into log and debugging, tap on user2root and tap on ROOT, shut down smartphone.
3- With flashtool load MT6735_Android_Scatter-Play.txt
4- Select download and connect smartphone to pc (smartphone must be powered off)… in few seconds will start the process and the new TWRP will be flashed.
3.1- To restore original stock recovery, you need load ad point 3 the file MT6735_Android_Scatter.txt
P.P.S to enter in the recovery, power off the smartphone, push VOL + and Power at the same time, you will see three words with VOL + you move selection, with VOL – you must select Recovery
To have root flash with TWRP the archive supersu.zip found here: https://download.chainfire.eu/696/supersu/

Unboxing & Review (Italian language) :

any custom roms for that phone ?

megthebest said:
Just Arrived.. .white color in my sample!
first challenge was to create TWRP .. successfull!
Archive contain Boot Unlocked and TWRP Material Play ported by me!
Tested successfully with V06 January 2016 rom.
Click to expand...
Click to collapse
This is great work. Have you got a version of this that works with the latest firmware? I upgraded my firmware to the June v10 firmware and when I put this version on it just boot loops the phone.
Thanks.

So no chance of an updated TWRP then megthebest?

I updated the TWRP myself and put it on needrom, for anyone who wants to use TWRP with the latest official ROM. I tested it on my phone and it works I used it to root the phone and install xposed framework.
All credit to megthebest, it is his work.
http://www.needrom.com/download/twrp-2-8-7-3-material-play-megthebest-3/

Thanks Famineuk! Can I update to the new version directly from twrp recovery or do I have to use the flashtool again?

I did it using the flash tool. I never tried it directly through TWRP. I think you could try it then if it didn't work you would still be able to flash it through the flash tool.

Famineuk said:
This is great work. Have you got a version of this that works with the latest firmware? I upgraded my firmware to the June v10 firmware and when I put this version on it just boot loops the phone.
Thanks.
Click to expand...
Click to collapse
Where did you get the v10 ?
i got v9 OTA, but no v10
have you used the one from needrom ? i see no other source.

Root is possible with KingoRoot (NOT Kingroot)

johnfdoe said:
Where did you get the v10 ?
i got v9 OTA, but no v10
have you used the one from needrom ? i see no other source.
Click to expand...
Click to collapse
This is a link to version 10
http://www.needrom.com/download/cubot-s550/

Will an update using the flash tool erase the internal memory of my phone(titanium backup, photos, etc)? Can I update to V10 using TWRP recovery or do I have to use the flash tool again?

baggos12 said:
Will an update using the flash tool erase the internal memory of my phone(titanium backup, photos, etc)? Can I update to V10 using TWRP recovery or do I have to use the flash tool again?
Click to expand...
Click to collapse
Only Flashtool to upgrade.
You may try to maintain Data if in flashtool you will deselect Userdata partition before start flashing (and Recovery partition if you want to maintain TWRP).
You loose root and it will be not guaranteed that with new v10 rom TWRP will work again (possible change in kernel)

megthebest said:
Only Flashtool to upgrade.
You may try to maintain Data if in flashtool you will deselect Userdata partition before start flashing (and Recovery partition if you want to maintain TWRP).
You loose root and it will be not guaranteed that with new v10 rom TWRP will work again (possible change in kernel)
Click to expand...
Click to collapse
you have twrp for s550

Flash Galaxy Young GT-S5360 without Odin and PC or Backup Restore

Oh hello fella,
Iam Aziu Zui I new here Junior Newbie ? that's okay
and this my frist Thread
So I was Mod a Firmware Stock ROM Odex DXLL1 to Flashable zip with Kitchen Cygwin . so this easy way for you to Restore back to Odex Galaxy Young GT-S5360 DXLL1 when you Stuck at Bootloop if fail MOD your HH .
You can use this ROM if :
1. You stiill can access to Recovery Mode
2. Still Normal to instal Flashable zip in Recovery Mode
If your Gyoung still Gingerbread system version . I Think this will work Finely on your Device
Frist Download this Material :
1. CusStock Odex DXLL1 Flashable zip
2. CWM for Galaxy Young GT-S5360 [if you need]
Instal like other Costom ROM , if you dont know you can follow below instruction :
1. After you download the ROM and CWM put the file out SDCard Folder.
2. Turn off your HH, go into Recovery Mode. HH own way when it is off, press and hold Volume UP (+) + Home + Power together. It will appear as shown below. Select aplly Update From SDcard and select CWM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: Touch Screen is not active, use Vol Up (Up), Vol Down (Down), Home (Select / OK), Power (Back / Return)
3. Once you get into CWM then the display will change as shown below. Select Wipe Data / Factory Reset and Wipe Cache Partition . then select Install Zip From SD.
4. Select Choose Zip From SD. Find the ROM file that has been at Download earlier. Then select the file, wait until the installation process Success.
5. If you are finished instal and success then Reboot it
Well Procces finished , Rom you back to Odex and the display becomes as usual. if you have trouble, you can contact me or you can Reply on this Thread. Thank you for visiting my Thread
Excellence This Cus Stock ROM :
1. ROM Odex As first purchase
2. Fast Boot ROM has the advantage
3. Applications are rarely in use As Talk, Socila Hub, and Chat On've cleaned
4. Internal who used only 25 MB which means it is still very relieved to install many applications
5. HH already in Rooted you dont need to rooting that again
6. IMEI is still intact so that there are no obstacles in the installation BBM
7. I Didn't find any bug of this ROM when i used this
So why you not direct Download this CusStock ROM and tried to install it. If you bootloop HH can immediately install this ROM so it does not require a PC and Odin. If the above does not match your Gyoung, you can use the Reinstall Gyoung1 way via PC and Odin.
You can also find this Article with Indonesian Language in my blog FullApkZ
That's it . See yea
Watch Tutorial Video :
Update : 22-05-2022
Log : Fix Broken Url

aziu zui said:
Oh hello fella,
Iam Aziu Zui I new here Junior Newbie ? that's okay
and this my frist Thread
You can also find this Article with Indonesian Language in my blog here
That's it . See yea
Click to expand...
Click to collapse
Nice Frist Post , Look Handsome and Brave :v

looks good, thanks.

kindly share the rom

Whoa, are people still using this phone?
I have one but the power button is getting weird.

Link invalid, please reupload link
Please reupload link

Link not working

file not found, i will try searching on the web

Redmi Note 8 Pro (begonia) MIUI 12 Stable

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
I am not responsible for any damage you done with your device.
Flash this ROM at your own risk.
Click to expand...
Click to collapse
Known Bugs:
idk
Click to expand...
Click to collapse
Download:
Global Version:https://xip.li/XLmZnV
China Version:https://xip.li/f1iVy0
Click to expand...
Click to collapse
Flashing Instructions for MIUI 12
Note that these are generic flashing instructions that should generally be applicable across Xiaomi, Redmi, and POCO devices. However, there is a possibility that there is a variation that is unique to your device, so we strongly advise visiting your device forums for device-specific instructions .
Recovery ROM Installation
Recovery ROMs come with a .zip file extension and can be installed either through the Local Update method from within MIUI, or through the Xiaomi stock recovery. You can also use a custom recovery like TWRP for installing these ROMs, though do note that device-specific instructions may differ in that case.
Local Update method:
Transfer the download .zip file to your phone, and ensure you place the file in the “downloaded_rom” folder in the internal storage of your device. If no such folder exists, create one in your internal storage base directory.
Within your phone, navigate to Settings > About Phone > System Update, and then press the three-dot icon in the top-right corner, and select “Choose Update Package”.
If the “Choose Update Package” option is missing, tap on the MIUI logo 10 times to activate the option.
Choose the downloaded .zip file.
Wait for the update to install.
Recovery method:
Rename the downloaded .zip file to update.zip and transfer it to the base directory of your phone’s internal storage.
Reboot your phone into recovery mode by powering it off and then pressing both the Power and the Volume Up buttons together.
Scroll to the “Install update.zip” option using the volume keys, and select the option using the power button.
Wait for the update to install.
Choose the “Reboot” option if your phone does not reboot by itself after installation is completed.
Click to expand...
Click to collapse
Additional information:
ROM OS Version: 10.x Q
ROM Kernel: Linux 4.14.x
ROM Firmware Required: any Android Q frimware
Based on: MIUI 12
Version Information
Status: Stable

Sorry a noob here Can i flash this without rooting or flashing twrp? like a normal firmware update?

Oshanru said:
Sorry a noob here Can i flash this without rooting or flashing twrp? like a normal firmware update?
Click to expand...
Click to collapse
yes ofc, first download the rom global or china version (check your mobile for this) then search " Local Update method " in this forum , you can find flashing instructions step by step.

Global version its multi language? Can you make some ss of rom if you using that version?

Sorry, do I need to flash gapps as I'm currently on the MIUI 12 Beta?

Why no direct link? How did u find stable rom? I can't see any info it's already released

Hi, We will get ota updates too right?

This is beta tester room

nagar.xda said:
This is beta tester room
Click to expand...
Click to collapse
ok so we don't need to install beta rom & it's better to wait few more days for the official release

it's better to wait few more days for the official release

This is only a Beta Stable released for the selected MIUI 12 Beta testers.

link are update

links updated

goziedrew said:
Sorry, do I need to flash gapps as I'm currently on the MIUI 12 Beta?
Click to expand...
Click to collapse
no