Develop Bugs

[UNOFFICIAL] TWRP 3.0.3-2 + MultiROM v33 for OnePlus 3/3T

***
We're moving...
From now on we move officially to :
MultiROM v33 for OP3/3T trhread.
***​
As you know, to be able to run multiple ROMs on our system we need a Modded TWRP version (for flashing ROMs as secondary systems) and MultriROM utility to choose which ROM we want to boot, in this case, the NO-KEXEC version (no patched kernel needed). System must be not encrypted.
Disclaimer:
Remember: You use this under your own risk!
Notes:
Tested with Stock 3.5.3 as secondary, CM, RR, etc...
Download (Latest TWRP and MultiROM for 3T - DEPRECATED, see below unified version):
Androidfilehost
MultiROM Manager (APK)
MultiROM Uninstaller
Download Unified version (3/3T)
TWRP_3.0.3-2_multirom_oneplus3_20170212-01.img
multirom-20170212-v33-UNOFFICIAL-oneplus3.zip
Guide (short version....):
Remember: Your device must be unencrypted or MultiROM won't work...
Flash TWRP-MROM modded and reboot in recovery mode (you need to unlock bootloader, etc...)
Flash MultiROM ZIP
Set No-Kexec option in settings for MultiROM from TWRP
Inject boot sector
Flash your favorite ROM as secondary from MultiROM menu (Add ROM...)
Reboot
Select ROM to boot from MultiROM menu
For Kernels Devs
If you want to support MultiROM, you must enable CONFIG_INPUT_HBTP_INPUT option in Kernel config file to properly support its touch screen menu, please. Thx.
All feedback is welcome. I have no much time, but I will try to keep it as well as possible.
Known Bugs:
You tell me...
Thanks:
To @Tasssadar for all awesome MultiROM dev
To @nkk71 for NO_KEXEC work
To TeamWin for TWRP (Specially @jcadduono for his initial port for OnePlus 3T)
To @martinusbe for his MultiROM port for OnePlus 3
XDA:DevDB Information
MutiROM, Tool/Utility for the OnePlus 3T
Contributors
BitOBSessiOn
Source Code: https://github.com/BitOBSessiOn/android_device_oneplus_oneplus3t/commits/mm6.0-twrp-mrom
Version Information
Status: Testing
Current Stable Version: 3.0.3-1
Stable Release Date: 2017-01-18
Current Beta Version: 3.0.3-2
Beta Release Date: 2017-02-12
Created 2016-12-01
Last Updated 2017-02-17

Reserved

Here we go, welcome BitO!
Sent from my Darkside of Oneplus 3

Nice work! Installed and waiting for another rom

lindahl85 said:
Nice work! Installed and waiting for another rom
Click to expand...
Click to collapse
Ha! ...same here. Are we crazy?

HTCore said:
Ha! ...same here. Are we crazy?
Click to expand...
Click to collapse
No, i just hate OOS. I hope someone will make a rom, or else i need to sell the phone or send it back.

lindahl85 said:
No, i just hate OOS. I hope someone will make a rom, or else i need to sell the phone or send it back.
Click to expand...
Click to collapse
ROMs will be made, just be patient. Spec wise, at least OP3T is one of the best phones out there, so sooner or later the development will be kicked and don't forget MultiROM could be a big participant for that.

Here he is again :highfive:
Great work bud!

My flashoholic tenancies are giving me withdraws for lack of dev support......... Thanks for the rom!

How do I unencrypt device? Newbie here.

killuminati206 said:
How do I unencrypt device? Newbie here.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=67738656&postcount=88

Will fastboot format userdata make the filesystem ext4? If yes, how can you keep it as f2fs?

bm19981217 said:
Will fastboot format userdata make the filesystem ext4? If yes, how can you keep it as f2fs?
Click to expand...
Click to collapse
Fastboot formatting won't change the fs.

As we don't have yet a multirom application to chose from it the ROM you want to boot, the workaround is to choose from the boot menu if you're using the stock kernel or, if you are on only so far available custom kernel which breaks the boot menu, chose the ROM from the recovery multirom settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Darkside of Oneplus 3

I think we can get rid of this "preliminary", isn't it BitO mate?
Sent from my Darkside of Oneplus 3

MultiROM Manager APK available
Available for testing here.
*OP Download section updated.

xanthrax said:
I think we can get rid of this "preliminary", isn't it BitO mate?
View attachment 3957970
Sent from my Darkside of Oneplus 3
Click to expand...
Click to collapse

Does it brake Safetynet /AndroidPay when booting to "stock room' ?

That safetynet got broken when you unlocked the bootloader and root it, has nothing to do with recovery
Sent from my Darkside of Oneplus 3T

Nice, got 3t in the mail

[ROM][UNOFFICIAL]AICP Oreo for Mix 2 (chiron)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
>> AICP Oreo <<
>> Rom For Mix 2 (chiron) <<
Initial Stable Build ​
What Works:
Same as RR Oreo.
Bugs:
-First boot it says outdated vendor image,but everything works fine!
-You tell me.
Download:
aicp_chiron_o-13.1-UNOFFICIAL-20180402.zip
GApps (You need ARM64 8.1)
Screenshots:
Frequently Asked Questions + Useful info:
- The first boot will always be slow. This is because once you enter your google account details it starts updating the google apps and your personal details, while downloading your own applications as well
- The rom does not include MIUI own services and user interface,its include AOSP systemui.
- The rom NOT is rooted by default so use Magisk zip installer package.
- After first boot, turn off NFC (or at least try to remove the check from the checkbox, it will not be possible due to a bug), then reboot the phone. After this you will be able to turn it on/off as per usual.
- The rom contains TWRP recovery (power+volume up=TWRP)
- To enable "Developer Tools" menu options, navigate to "Settings->About Phone" and tap "Build number" 4-5 times
- It is not possible to update a rom OTA, only from recovery. The method of updating the rom is the same as installing it from step (3), the only difference is that the "-d: wipe data/factory reset" part needs to be skipped
- You can make the Google search bar disappear from the home screen by opening the settings menu of the Trebuchet launcher via long press. Then expand the advanced settings by swiping up the grey bar of Wallpapers Modules Themes. Here look for the Search bar and switch it off.
Source codes:
AICP
Device tree:
chiron Source Code
Credits:
-NexXuSKa
-Arasthel
-andr68rus
-Mix 2 AOSP Development Team
Sorry for my bad English!
XDA:DevDB Information
[ROM][UNOFFICIAL]AICP Oreo for Mix 2 (chiron), ROM for the Xiaomi Mi Mix 2
Contributors
NexXuSKa, arasthel, andr68rus
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked Bootloader + TWRP installed
Based On: AICP
Version Information
Status: Stable
Created 2018-04-04
Last Updated 2018-04-04

good!

nice work

is this a maghiarii language? )

machiavelly said:
is this a maghiarii language? )
Click to expand...
Click to collapse
Yeayea

THX

good job man!

Nicely done, thank you!

Hi all...
When trying to install the Rom, it says that "the file is corrupted" in red color letter.

My favorite ROM! Thank you guys

ampelift said:
Hi all...
When trying to install the Rom, it says that "the file is corrupted" in red color letter.
Click to expand...
Click to collapse
Download again

ampelift said:
Hi all...
When trying to install the Rom, it says that "the file is corrupted" in red color letter.
Click to expand...
Click to collapse
Try redownload zip file. Anyway i will push an update today!

Thank for your rom
I can`t flash
When I flash your rom and reboot my device go to fastboot auto all time.

Call me IX said:
I can`t flash
When I flash your rom and reboot my device go to fastboot auto all time.
Click to expand...
Click to collapse
Same here.

kremmit said:
Same here.
Click to expand...
Click to collapse
For me to, what the problem?

this rom will it always be updated?

Official AICP for Chiron http://dwnld.aicp-rom.com/?device=chiron

sergtot said:
Official AICP for Chiron http://dwnld.aicp-rom.com/?device=chiron
Click to expand...
Click to collapse
I noticed it this morning but had bootloops in the setup menu.

CrazyBeaver2377 said:
I noticed it this morning but had bootloops in the setup menu.
Click to expand...
Click to collapse
Bootloops or sudden reboots?

sergtot said:
Bootloops or sudden reboots?
Click to expand...
Click to collapse
rom booted fine at first but got soft bootloop when going through setup.

[ROM][9.0] Official HashOS

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official build at: https://download.hash-os.com/gemini
Our Gerrit: https://gerrit.hash-os.com
Build will be done every Saturday.​
Kernel Source: android_kernel_xiaomi_msm8996
XDA:DevDB Information
[9.x] Official HashOS, ROM for the Xiaomi Mi 5
Contributors
enzoo96
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: 8.8.30
Version Information
Status: Beta
Beta Release Date: 2018-09-22
Created 2018-09-22
Last Updated 2018-09-22

Reserved

Reserved

Thanks very much for your great job

nice...
btw where i can find this ROM's features?

Thanks alot @Is Ouzz

wow, another pie rom. nice dev

excuse the newsbee question, but does the rom contain the updated firmware inside ?. I have the MIUI 10.0.1.0 Global stable (I do not know what firmware mounts), can I install this HasOS via twrp without installing other firmware? if not where I find the firmware 8.8.30. thank you for your reply and above all, thank you for your work!

albertogar said:
excuse the newsbee question, but does the rom contain the updated firmware inside ?. I have the MIUI 10.0.1.0 Global stable (I do not know what firmware mounts), can I install this HasOS via twrp without installing other firmware? if not where I find the firmware 8.8.30. thank you for your reply and above all, thank you for your work!
Click to expand...
Click to collapse
you can find the firmware files here:
https://sourceforge.net/projects/xiaomi-firmware-updater/files/Developer/
choose Gemini and the fw zip with GLOBAL in filename.
just flash it before flashing the ROM

Rod160 said:
you can find the firmware files here:
https://sourceforge.net/projects/xiaomi-firmware-updater/files/Developer/
choose Gemini and the fw zip with GLOBAL in filename.
just flash it before flashing the ROM
Click to expand...
Click to collapse
thanks a lot, I did not know this site where to find the firmware. So I enter twrp, I wipe, install the firmware, install the rom, root and gapps and reboot. correct?

screenshot please

Thank you for new rom.
I Installed it, it`s working good enough for early versions of Pie. Things i would like to see improved in next build:
1) Splash screen animation while booting is not rotating properly
2) In special HashOs`s setting menu there is Buttons section, but Swap hardware buttons is in different part of settings. Duplicate "swap hardware buttons" in hashos`s settings?
3) fps of animations is not consistent

nebik said:
Thank you for new rom.
I Installed it, it`s working good enough for early versions of Pie. Things i would like to see improved in next build:
1) Splash screen animation while booting is not rotating properly
2) In special HashOs`s setting menu there is Buttons section, but Swap hardware buttons is in different part of settings. Duplicate "swap hardware buttons" in hashos`s settings?
3) fps of animations is not consistent
Click to expand...
Click to collapse
Hello, for bootanimation it's just temporary. For swap hardware buttons it's device features not hashos features, so it's normal.

AWSOME!!! This one is the real rom build with heart and passion. Thanks Dev...
Many unique features that not available on other rom.
Even I noticed some features still not working properly.
If I get your permission, let me explain what I get.
1. There in double dt2w settings in "display" and "device feature" what is different?
2. We cannot disable dt2w. Already turn off these 2 setting in 2 place, and restart. But dt2w still trigerred.
3. Dt2w not check proximity, so it annoying when phone in pocket.
4. Pixel launcher fc (installed from stock opengapps).
FYI, it happen on unofficial Los 16 too, but not in other one pie rom.
5. It's better when reset pulldown menu, it will reset column and row too. (Now only icon that reseted)
Many thanks Dev... I will stick with this rom...

Hello,
I can not install the rom, I can only install the "lineage", I have populated it in all possible ways, it always stays in the logo.

After flash rom stuck in bootanimation logo. Please tell me for install this rom

pepejemjem said:
Hello,
I can not install the rom, I can only install the "lineage", I have populated it in all possible ways, it always stays in the logo.
Click to expand...
Click to collapse
Latest fw and latest recovery?

yes,
The funny thing is that if I can install "LINEAGE 16" without any problem.

To whoever tried this rom, how's the battery drain?

I got a bootloop on latest build , firmware I use is 8.8.30

Redmi Note 8 Pro (begonia) MIUI 12 Stable

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
I am not responsible for any damage you done with your device.
Flash this ROM at your own risk.
Click to expand...
Click to collapse
Known Bugs:
idk
Click to expand...
Click to collapse
Download:
Global Version:https://xip.li/XLmZnV
China Version:https://xip.li/f1iVy0
Click to expand...
Click to collapse
Flashing Instructions for MIUI 12
Note that these are generic flashing instructions that should generally be applicable across Xiaomi, Redmi, and POCO devices. However, there is a possibility that there is a variation that is unique to your device, so we strongly advise visiting your device forums for device-specific instructions .
Recovery ROM Installation
Recovery ROMs come with a .zip file extension and can be installed either through the Local Update method from within MIUI, or through the Xiaomi stock recovery. You can also use a custom recovery like TWRP for installing these ROMs, though do note that device-specific instructions may differ in that case.
Local Update method:
Transfer the download .zip file to your phone, and ensure you place the file in the “downloaded_rom” folder in the internal storage of your device. If no such folder exists, create one in your internal storage base directory.
Within your phone, navigate to Settings > About Phone > System Update, and then press the three-dot icon in the top-right corner, and select “Choose Update Package”.
If the “Choose Update Package” option is missing, tap on the MIUI logo 10 times to activate the option.
Choose the downloaded .zip file.
Wait for the update to install.
Recovery method:
Rename the downloaded .zip file to update.zip and transfer it to the base directory of your phone’s internal storage.
Reboot your phone into recovery mode by powering it off and then pressing both the Power and the Volume Up buttons together.
Scroll to the “Install update.zip” option using the volume keys, and select the option using the power button.
Wait for the update to install.
Choose the “Reboot” option if your phone does not reboot by itself after installation is completed.
Click to expand...
Click to collapse
Additional information:
ROM OS Version: 10.x Q
ROM Kernel: Linux 4.14.x
ROM Firmware Required: any Android Q frimware
Based on: MIUI 12
Version Information
Status: Stable

Sorry a noob here Can i flash this without rooting or flashing twrp? like a normal firmware update?

Oshanru said:
Sorry a noob here Can i flash this without rooting or flashing twrp? like a normal firmware update?
Click to expand...
Click to collapse
yes ofc, first download the rom global or china version (check your mobile for this) then search " Local Update method " in this forum , you can find flashing instructions step by step.

Global version its multi language? Can you make some ss of rom if you using that version?

Sorry, do I need to flash gapps as I'm currently on the MIUI 12 Beta?

Why no direct link? How did u find stable rom? I can't see any info it's already released

Hi, We will get ota updates too right?

This is beta tester room

nagar.xda said:
This is beta tester room
Click to expand...
Click to collapse
ok so we don't need to install beta rom & it's better to wait few more days for the official release

it's better to wait few more days for the official release

This is only a Beta Stable released for the selected MIUI 12 Beta testers.

link are update

links updated

goziedrew said:
Sorry, do I need to flash gapps as I'm currently on the MIUI 12 Beta?
Click to expand...
Click to collapse
no

[OFFICIAL][DEPRECATED][A11] crDroid v7.13 - Xiaomi Mi A2 Lite (daisy)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
Gapps (Download from here)
Magisk 21.4 or newer for root (after first boot) - (Download from here)
First time installation:
Flash stock FW 11.0.4.0 (if you have not so again)
Boot to TWRP via fastboot
Format data
Flash the ROM zip and the TWRP installer zip
Reboot to recovery
Flash Gapps (Optional)
Format data
Reboot to system
Update installation:
Go to Settings -> System -> Updater and check for updates
Click "Download" and select "Install" once that is done
Press "Reboot" to continue
Sources:
ROM: Source code
Kernel: Kernel URL
Device tree: Device Tree
Vendor tree: Vendor
Download:
ROM: https://crdroid.net
Known issues:
- Flashlight is dead in some apps when Camera2API (HAL3) is enabled. This issue can be worked around by setting the Camera HAL version to HAL1 to use affected apps and back to HAL3 for GCams
(Settings -> System -> Advanced -> Camera HAL Switch)
Visit official website @ crDroid.net
ccrDroid daisy Telegram
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs

You changed your mind, lol.
Nice to witness a rebirth.
Congrats.

And we are now official

Have anyone tried it? Is it stable enough for daily usage?
I am considering switching from the official ROM.

Pawel_ said:
Have anyone tried it? Is it stable enough for daily usage?
I am considering switching from the official ROM.
Click to expand...
Click to collapse
This is official too though

what about gapps?
why FlameGApps?
why not opengapps?
does anyone have a logcat already?
and when TWRP upgate && TWRP upgrade -y ???

thx for share. looks good for now

New update is up with the December security patch!

LinkBoi said:
New update is up with the December security patch
Click to expand...
Click to collapse
Catched ota update, magisk is ok, no reflash needed

Hello, it seems impossible to install new update, neither by system/update nor by twrp. In both case smartphone remains stuck with no system installed.

stratonz said:
Hello, it seems impossible to install new update, neither by system/update nor by twrp. In both case smartphone remains stuck with no system installed.
Click to expand...
Click to collapse
I'd recommend you to do a clean flash, it works perfectly for me.

LinkBoi said:
Flash stock FW 11.0.4.0 (if you have not so again)
Click to expand...
Click to collapse
why 11.04?
what is the reason for this?
and what are the consequences if I install on 11.21?

It probably WILL boot on V11.0.21.0. I had this version on my phone and was trying to run Havoc OS, then Arrow 12, and a few others from this forum. Only crDroid booted.
Then I found this guide where it is stated that you should have 10.0.18.0 for customs roms and after downgrading to this version all tested custom ROMs are booting correctly.

@LinkBoi is another security patch update / general update planned?
Thanks for your work, the ROM works just great.

Fernandus91 said:
@LinkBoi is another security patch update / general update planned?
Thanks for your work, the ROM works just great.
Click to expand...
Click to collapse
Not for A11

Does it pass SafetyNet?