So...the latest update (the one with interactive watch faces) broke theater mode for me. I turn it on but it doesn't actually work. It appears to turn itself off. Anyone else notice this? How do I fix it?
Check if you can wake the watch by touching the screen.
It's not that it is broken but, when you press the power button it automatically turns it off. But not pressing the button you shouldn't be able to wake up the screen...
BrunoJ
BRunohenri said:
Check if you can wake the watch by touching the screen.
It's not that it is broken but, when you press the power button it automatically turns it off. But not pressing the button you shouldn't be able to wake up the screen...
BrunoJ
Click to expand...
Click to collapse
So...
-I turn theater mode on.
-At some point later I start getting notifications on my watch.
-Moving my arm wakes it up.
-Theater mode appears to be turned off mysteriously when I go to turn it on.
I can report the same issue. Theather mode is completely broken for me as well. Turns itself off all the the time. I'm also noticing random artifacts on the screen, this update seems pretty buggy.
I had a problem with it before the update. after a restart it would turn the mode off. after the update its worse.
BinaryW01f said:
I can report the same issue. Theather mode is completely broken for me as well. Turns itself off all the the time. I'm also noticing random artifacts on the screen, this update seems pretty buggy.
Click to expand...
Click to collapse
I am seeing artifacts too. When I swipe down from the top with the watch showing, when the battery % fades out there is an artifact right of the %.
Sent from my LG-VS980 using Tapatalk
I also have had the same problem with cinema/theater mode since updating to Android Wear 1.3. When I activate it and then later press the home button, it then deactivates and automatically turns off cinema mode. Today I raised this issue and wrote to Motorola hoping for a response soon.
Yes, its broken. I turn the Theater mode on. At some point when I press the power button to wake the device for a quick glance, theater mode is off.
The most common use case to conserve battery in Moto 360 was to keep it in Theater mode during regular day. While in Theater mode single press turned screen on momentarily for a quick glance. Then it went back to theater mode automatically. This no longer works. Single press now turns Theater mode off instead of just turning screen on momentarily.
Just checked the issue!
I don't want to manually set Cinema Mode ON after checking notifications.
Update = Fail
Broken on my watch too...
The marshmallow update for the moto 360 comes, again, with broken theater mode. Anyone else having this issue?
People who have updated their watch to 6.0.1, probably noticed that it is impossible now to turn off the display function "Theater Mode" during charging. I found a way:
- Turn on "Developer options" (by repeatedly pressing the build number in the information)
- select "Options Wear for a programmer"
- leater Turn on "Force protection against firing"
From the moment you turn on "theater mode", eg by double depressing side button, the screen during charging blank, as was the case for 5.1.1.
There sugerujcie a message about the "Introduction of amendments to restart." It's probably a mistake translate (should rather be "to restart"). Restart, not only that it does not change, but also removes the "Developer options" and you have to call them again.
Sorry bad my engish
Theater mode while charging still works the same for me on 6.0.1 as it did on 5.1.1. I double press the side button and theater mode is enabled until I press the side button to enable regular display mode.
Me after a while, you turn on ambient mode
I have a head unit where the volume knob also acts as a power button when pressed and puts the device on stand by. When I put press the power button, the screen goes blank. The next time the unit boots up, the wifi is disabled. I have to go into settings and turn it on. Is there a way to prevent this from happening or is there a why to turn on wifi automatically on every boot?
A few time this has happened now....phone won't turn back on. Buttons do nothing---however, the logo is breathing from a notification (which I have no idea how to change per app). Have to force a reboot via power button. Anyone else having this?
I get this in 1 specific scenario.
When my phone is plugged in charging using my Anker Qualcomm 3.0 car charger, and I turn the engine off. The screen suddenly goes black, and it won't come back on until I restart it.
I can even hear it make the unlock noise when I use the fingerprint scanner, so the device seems to still be functional, just the screen is off.
I have to charge my razer using a slower speed car charger in order to avoid this - or remember to unplug the phone before turning off the engine.
My Xtrons system running Hal9K 3.2.1 with MCU version MTCE_GS_V3.01_2 is reacting very strange during wake up.
Most of the time it all goes wel. As soon as I turn my car key system wakes up within seconds and runs normally. Even after days of not using my car.
On the other hand, sometimes, system starts up, but now showing the Android and Car logo. This means system did shutdown instead of go to sleep when leaving the car.
But since a couple of weeks I am having a new issue.
As soon as turn the key, all the lights on head unit go on, but screen does not light up.
Pressing the left button on the unit does not do anything.
Only thing that works is pressing the reset button. This morning , even pressing the reset button did not wake up the unit.
After several attempts , reset and power button, finally system woke up and run normally.
Wonder what this problem could be?
Why does the unit one day wake up fine, an other it restarts ? And what could cause the problem that lately i need to use the reset button?
Hi,
I am experiencing a similar issue. As soon as it gets around 0°C the unit does a full reboot. I guess it has something to do with the power supply circuit. I am also running the Hal9k ROM but on a Witson device with a different MCU version.
I have a 1 yr old LM px5 with boot issues.
I used to have on auto sleep but the damn thing would never wake up. Even pressing the on off button.
Now I have it on sleep after 1/2 or so which was a little better, and reverse cam worked if I have to re-start.
Once on it works and runs fine and has never turned itself off, so I dont suspect any lose power wires.
However I have briefly had issues with my canbus due to a faulty alarm unit. Since repaired but ever since steering controls have sometimes been erratic . That I can live with but its the not turning on thats the problem.
To me it seems like its (sometimes) not getting the 'turn on' command.
Can anyone advise please, because this unit 'should' work without canbus - yes ? If so how can I turn on without canbus, when its getting power.
It always turns off fine when I press the button but will never turn on just by the button. Even if car is running.
Answer: Whisper sweet nothings
Really ? ... ?