MKUltraBlack N8 for S7/S7E/NFE
V1.O
https://www.androidfilehost.com/?fid=8889791610682879859
My First N8 port for S7/S7E/NFE
Bixby
Infinity wallpapers
Removed navbar
Decrypted omc
Telegram link in settings
Gametools
Long press restart to boot to recovery
Straight flash no aroma
USSD codes
Applock
Secure folder
Credits:
Special thank you to:
@Kill-Switch
For S7/S7E porting method and lots of other help including fixes
@ananjaser1211
For help with NFE method and updater script mods
@corsicanu
For long press boot to recovery method and other help including fixes
******************
How to install
custom rom
******************
You will need:
*PC with Odin 3.13.1 or above
(https://samsungodin.com)
*TWRP .tar image for your model
Flat: https://eu.dl.twrp.me/herolte/
Edge: https://eu.dl.twrp.me/hero2lte/
*Rom
(Stored on external memory/sdcard)
*Unlocked OEM
To unlock OEM
********************************************
Go to settings, phone information, and tap build number until it says developer options unlocked, press back twice and go into developer options turn on OEM unlock
********************************************
1. Put your phone into download mode by turning your phone off, now press volume down, power and home key at the same time until the screen turns green, then release the buttons.
2. Open Odin on your PC and plug the USB cable into your phone and press volume up.
You will see it is connected to Odin, (there will be a blue rectangle saying com(number)
3. Select the AP section and load your TWRP .tar image in there.
4. Get ready to press volume up, home and power button at same time on your phone now press start on Odin, it will only take a few seconds, as soon as the box goes green and says pass, press the volume up, home and power button combo until TWRP splash screen shows up on your phone screen. Now release button combo and unplug USB cable from your phone.
5. In twrp press wipe, then format. A keyboard will appear, type yes and press enter. Now press back to go to TWRP main screen and press reboot and select reboot to recovery. It will now reboot back into TWRP.
6. Press wipe again, then format, type yes, press enter. (Do this 3 times)
Press back to go to TWRP main screen and press wipe, select advanced wipe, check all boxes apart from OTG and SDCARD and swipe. (Do this 3 times)
Press back to go to TWRP main screen and press wipe then swipe to factory reset. (Do this 3 times)
********************************************
Your phone is now completely clear with no operating system and ready to flash a custom rom. When you downloaded your rom, you stored it on your sd card or external storage, you need to do this as when you do all the wipes it wipes your internal storage but not your sd card, that's why it says in advanced wipe don't check the sd card or OTG boxes.
********************************************
7. Press back until you go to main screen in TWRP and select install, select storage, external (sd card) and select the rom zip. Now just swipe to flash.
Normally it will go into aroma which contains check boxes of extra items to add into the rom, this rom however is a straight flash, it will automatically detect your phone model and select the correct kernel and battery capacity. It will say Installation finished when done. Now go back to main twrp screen and select reboot and press system. The phone will reboot, leave it 10-15mins to allow it to load the rom, be patient. Then you will be at the set up page just like starting a new phone. Set up from there and enjoy the rom.
Sent from my Note 8 using XDA Labs
Reserved too
Sent from my Note 8 using XDA Labs
Screenshots
Sent from my Note 8 using XDA Labs
I tried flashing this rom on my samsung galaxy s7 sm-g930k but the twrp recovery reported an error "can not install rom". While the MKUltraBlack NFE Rom I have installed and used very well on this device. Does this rom not support korea variant?
nil2009 said:
I tried flashing this rom on my samsung galaxy s7 sm-g930k but the twrp recovery reported an error "can not install rom". While the MKUltraBlack NFE Rom I have installed and used very well on this device. Does this rom not support korea variant?
Click to expand...
Click to collapse
It is for F variant but if you flashed the NFE it is also for F variant so it should work
Sent from my Note 8 using XDA Labs
nil2009 said:
I tried flashing this rom on my samsung galaxy s7 sm-g930k but the twrp recovery reported an error "can not install rom". While the MKUltraBlack NFE Rom I have installed and used very well on this device. Does this rom not support korea variant?
Click to expand...
Click to collapse
Does MKUltraBlack NFE V4.0 rom, work on G930K?
Please I need to know before flashing
stainlez32 said:
Does MKUltraBlack NFE V4.0 rom, work on G930K?
Please I need to know before flashing
Click to expand...
Click to collapse
Yes, it works very well and smoothly.
Just downloaded N8 base with August security patch, will be rebasing and publish in the next few days.
can you port one UI 2.0 from note 8? is it stable?
GameMountain said:
can you port one UI 2.0 from note 8? is it stable?
Click to expand...
Click to collapse
Note 8 does not have official One UI 2.0, not even 1.1, besides, we already have a ported One UI 2.5, FloyedQ, you should search more often.
It is strange how I didn't see this thread before :|
Mohamedkam000 said:
Note 8 does not have official One UI 2.0, not even 1.1, besides, we already have a ported One UI 2.5, FloyedQ, you should search more often.
It is strange how I didn't see this thread before :|
Click to expand...
Click to collapse
Oh sorry didn't reasearch it. Floyd q has lots of bugs, I want a stable one. I am not a developer btw, so, please don't tell me to make my own.
GameMountain said:
Oh sorry didn't reasearch it. Floyd q has lots of bugs, I want a stable one. I am not a developer btw, so, please don't tell me to make my own.
Click to expand...
Click to collapse
Of course I won't, common solutions are not always the right ones.
FloyedQ does not have that much of bugs to a point that makes it useless, it has only 2 major problems:
GearVR
High Wi-Fi uptimes (only on some devices)
The latter bug is probably related to kernel drivers, anyway, if GearVR is extremely important to you, then it's okay to search for another ROM.
I understand that you are not a developer, but as a user, at least you need to understand that ROMs can't be ported from any device, at least not without a bootable kernel.
A device with a similar, not too far chip will make it easier to port it's ROM, if Note 8 had One UI 2.x, of course by now it would have been a stable port, but sadly it doesn't. Give it time.
Mohamedkam000 said:
Of course I won't, common solutions are not always the right ones.
FloyedQ does not have that much of bugs to a point that makes it useless, it has only 2 major problems:
GearVR
High Wi-Fi uptimes (only on some devices)
The latter bug is probably related to kernel drivers, anyway, if GearVR is extremely important to you, then it's okay to search for another ROM.
I understand that you are not a developer, but as a user, at least you need to understand that ROMs can't be ported from any device, at least not without a bootable kernel.
A device with a similar, not too far chip will make it easier to port it's ROM, if Note 8 had One UI 2.x, of course by now it would have been a stable port, but sadly it doesn't. Give it time.
Click to expand...
Click to collapse
Thank you for your reply, I will check Floyd.
Related
UPDATED 7/01/2014: added a link to surdu_petru's cyanogenmod
added MIUI 3.12.6 instead of 3.12.22, the last one caused some troubles
added new instrustions for a working TWRP
thread organized for a better and easier view
Click to expand...
Click to collapse
In This thread i will keep an eye on every forum that has a HAM section to find every ROM being developed for out device
How to get TWRP
1_ Use TWRP recovery from the ascend P6 forum "credits to surdu_petru"
If you found the instructions a bit confusing then do as follows
a- Download this zip containing some files we need, extract it and copy the 4 files within to the root of your sd card
b- Install Touch Recovery.apk, launch the app then hit "Install Recovery" this will ask for root permission, when it done, hit "Reboot into Recovery"
c- When in CWM recovery, select "install zip" and look for "Touch Recovery Loader.zip" in your exterbal sd card
d- Selct "install zip" again and this time look for "TWRP_01" and "TWRP_02" install them both one by one.
e- Select Reboot System, when the phone rebootsn first you get to see the HUAWEI ASCEND logo, then the LED light will turn GREEN so quickly keep pressing "volume+" or "vomule-" til the LED light turns RED
f- If you did everything right you should be now in TWRP
2_ In TWRP recovery, select "Install" then flash the zip file you want
Click to expand...
Click to collapse
How to Flash a stock ROM
1_ download the rom and unzip it
2_ put the dload folder in the root of your external sd card
3_ make sure the folder dload contains one file names "UPDATE.APP"
4_ backup system settings and other configurations to external sdcard using the backup app from huawei
5_ go to settings>about phone>system update>local update>confirm
Click to expand...
Click to collapse
STOCK ROMs (Android 4.1.X/Emotion UI)
B113
DOWNLOAD
Android 4.1
EMUI 1.5
Version Number: V100R001C00B113
Update Package Size: 1.08 GB
Click to expand...
Click to collapse
[/CENTER]
B221
DOWNLOAD
Android 4.1.2
Current General Release from Huawei for the International Market, with Gapps
Click to expand...
Click to collapse
Credits to Onecton
STOCK ROMs (Android 4.2.X/Emotion UI)
B905
DOWNLOAD
Android 4.2.2.
Currently the Beta Chinese Version, No Gapps included
For Navigationbar Options Edit this in Build.prop:
ro.config.hw_navigationbar =false -> true
ro.config.hw_shownavisettings =false -> true
GApps which work with this Rom -> LINK
CWM for flashing said GApps -> LINK[
Click to expand...
Click to collapse
Credits to Onecton
B906
Android 4.2.2
EMOTION UI 1.6
Latest stable chinese version (multilang)
Three themes only
Click to expand...
Click to collapse
DOWNLOAD
DOWNLOAD mirror
B907
Android 4.2.2
EMOTION UI 1.6
Russian version (should work perfectly in other countries)
Click to expand...
Click to collapse
DOWNLOAD
CUSTOM ROMs
[UNOFFICIAL][CyanogenMod 10.1 [06/01/2013]
Credits to THE ONE THAT MADE IT @surdu_petru
10.1 is based on Android 4.2
builded from the last updated CyanogenMod 10.1 source ;
based on Firmware B125 !
build safe to test only if you follow the steps to Installation !
Include the last update TWRP Recovery R02.1 !!!
Not Working :
camera ;
maybe some other small stuff :
audio a2dp ;
Wi-Fi hotspot ;
Click to expand...
Click to collapse
For a download link please visit surdu_petru's thread HERE
FLASH with TWRP recovery
MIUI ROMs
MIUI 3.12.6
Based on Android 4.2.2
When bugs found, please report them here
Click to expand...
Click to collapse
How to flash
1_ Use TWRP recovery from the ascend P6 forum "credits to surdu_petru"
If you found the instructions a bit confusing then do as follows
a- Download this zip containing some files we need, extract it and copy the 4 files within to the root of your sd card
b- Install Touch Recovery.apk, launch the app then hit "Install Recovery" this will ask for root permission, when it done, hit "Reboot into Recovery"
c- When in CWM recovery, select "install zip" and look for "Touch Recovery Loader.zip" in your exterbal sd card
d- Selct "install zip" again and this time look for "TWRP_01" and "TWRP_02" install them both one by one.
e- Select Reboot System, when the phone rebootsn first you get to see the HUAWEI ASCEND logo, then the LED light will turn GREEN so quickly keep pressing "volume+" or "vomule-" til the LED light turns RED
f- If you did everything right you should be now in TWRP
2_ In TWRP recovery, select Install then flash the zip file
Download link
MIUI 3.6.9
Based on Android 4.1.2 and Emotion UI B114
Click to expand...
Click to collapse
DOWNLOAD
How to Flash
1_ Download and unrar the ROM
2_ Enable "USB Debugging"
3_ Change usb connection to MTP
4_ Run the file "flash_all.bat " then tap just "enter"
5_ When you see that the flash is done, press and hold the "volume up" on the phone + any key on PC
6_ Phone will automatically restarts when you see the Huawei logo, release the phone "volume up" key
7_ Perform a factory reset
Thanks a lot
Really appropriate this compilation , looking forward to seeing 4.3 or 4.4 even custom rom.
Thanks
Can the international version of Huawei Ascend Mate( 1Gb ram ) use all the above roms.
Hi Hamdimo.
Firstly :thumbup::thumbup::thumbup::thumbup: for this forum..
Is there any custom P6 rom available for mate? In the other forum someone mention porting p6 rom in our ham? Thanks
[email protected]
Just Want To Know If Whatsapp Work Perfectly In MIUI?
There is android 4.4 costom rom for the mate?
Gesendet von meinem HUAWEI MT1-U06 mit Tapatalk
CM 10.2 on Ascend Mate?
Does anyone know how hard it would be to get CM 10.2 to run on the Ascend Mate? Just got the phone and really love it but can't stand all the bloat which really kills the batty. Love to have something lean and mean like CM running on my phone.
Thanks.
vastphoto said:
Does anyone know how hard it would be to get CM 10.2 to run on the Ascend Mate? Just got the phone and really love it but can't stand all the bloat which really kills the batty. Love to have something lean and mean like CM running on my phone.
Thanks.
Click to expand...
Click to collapse
CM 10.1 is the best we can hope for until huawei release a 4.3 or 4.4 rom for the mate and then we will still need a way to flash a custom recovery. Until then our options are very limited.
But the updates its to slow...
Gesendet von meinem HUAWEI MT1-U06 mit Tapatalk
MIUI 5 3.8.12 for Huawei Ascend Mate.
Hey all, I found this ROM; an update (I think) to the previous MIUI ROM. I've loaded it up and have had no real problems. Pretty simple install. Skipped the MIUI and GMS downloads. Used latest Google Play apk instead. First off, the bottoms don't show. Go to settings and change nav button height (I changed both portrait and landscape to "52" and it looks nice).
Overall, this MIUI stuff seems pretty slick! =)
http://droidsans.com/node/136903
thegooz said:
Hey all, I found this ROM; an update (I think) to the previous MIUI ROM. I've loaded it up and have had no real problems. Pretty simple install. Skipped the MIUI and GMS downloads. Used latest Google Play apk instead. First off, the bottoms don't show. Go to settings and change nav button height (I changed both portrait and landscape to "52" and it looks nice).
Overall, this MIUI stuff seems pretty slick! =)
http://droidsans.com/node/136903
Click to expand...
Click to collapse
Nice catch, i'll include this rom here as an update
thegooz said:
Hey all, I found this ROM; an update (I think) to the previous MIUI ROM. I've loaded it up and have had no real problems. Pretty simple install. Skipped the MIUI and GMS downloads. Used latest Google Play apk instead. First off, the bottoms don't show. Go to settings and change nav button height (I changed both portrait and landscape to "52" and it looks nice).
Overall, this MIUI stuff seems pretty slick! =)
http://droidsans.com/node/136903
Click to expand...
Click to collapse
hi thegooz,
i hv downloaded it. just in case would you be kind to include how you flash it with a guide? thanks.
i read the guide but just in case someone would want to ask the same question over and over again, they'll have the flashing guide.
i havent install it yet, wanna try when i get back.
by the way, i revert back to B221, will it be compatible? i also had downloaded the Official B907 from the russian site but have not flash yet.
just want to know anyone experiences towards these.
I feel that i've made a mistake.
I try flashing the miui rom from thegooz link. Its stuck in bootloop/keep restarting when still reading files during the last system reading. That was in 60% batt.
Now keep restarting that way.
When i discionnect the charging cable it turn off and restarting again. Same as when i connect the cable again.
Any suggestion guys.
T28#HOX
theoppositeman said:
hi thegooz,
i hv downloaded it. just in case would you be kind to include how you flash it with a guide? thanks.
i read the guide but just in case someone would want to ask the same question over and over again, they'll have the flashing guide.
i havent install it yet, wanna try when i get back.
by the way, i revert back to B221, will it be compatible? i also had downloaded the Official B907 from the russian site but have not flash yet.
just want to know anyone experiences towards these.
Click to expand...
Click to collapse
I've used the B907 as well. It's just a dload onto the SDcard and install. That ROM seems to be the best one in my experience. However, I couldn't the hide/show nav buttons to work. I ended up using Ultimate Dynamic Navbar Lite by Pavel (googleplaystore) to get the effect.
I'll probably switch back to it soon. I like MIUI but, it isn't as smooth although it looks better; and some things don't work well, i.e., voice assistant is in Chinese, MIUI audio player doesn't work with APEX launcher....things like that.
This is how I installed it. You might have to unplug/replug the usb and start over if it doesn't read Daemon. just unplug phone, close bluish/green window and try again. It took me a couple of times.-
Unzip ROM to desktop.
Put your usb cable in your pc and your phone.
Check if it is in debug mode (I was connected as Huwaei suite option).
If it isn't in debug, then go to settings developer options put usb debugging on.
Open ROM folder on desktop and press shift and double click on flash_all (its a batch file)
A command line window will appear in blueish/green (it's in Chinese).
Just press 1 on your keyboard and press enter (rom)
Then press enter again.
The phone will shutdown and will immediately will reboot you will get the Huawei ascend logo en the files will transfer now wait the phone will boot into the new ROM and your done (give it a while and don't unplug until the window appears to be completed).
I've done before and was able to dload back to B907 off SD card.
I've a 1.5gb version phone.
Good luck.
I am now stuck in bootloop. Mistakrnly didnt realised the battery is low 4+%.
At first try it went to bootloop so i restart in recovery force update with dload in ext sd card. Until 'Checking Module SYSTEM' phone restart in the middle and keep restarting at huawei logo.
I think battery not enough. So now i need help if anyone knows how to deplete
The battery so can charge. No led light when connect to usb cable/ no signal of the mate charging.
T28#HOX
theoppositeman said:
I am now stuck in bootloop. Mistakrnly didnt realised the battery is low 4+%.
At first try it went to bootloop so i restart in recovery force update with dload in ext sd card. Until 'Checking Module SYSTEM' phone restart in the middle and keep restarting at huawei logo.
I think battery not enough. So now i need help if anyone knows how to deplete
The battery so can charge. No led light when connect to usb cable/ no signal of the mate charging.
T28#HOX
Click to expand...
Click to collapse
You will probably need to leave ur mate on charge for sometime before ur mate is able to return to its normal state.
Try also the force installation method to install the B907 ROM to revive ur unit.
(with or without the charger connected).
Hope this helps..
Sent from my HUAWEI MT1-U06 using xda app-developers app
syaah said:
You will probably need to leave ur mate on charge for sometime before ur mate is able to return to its normal state.
Try also the force installation method to install the B907 ROM to revive ur unit.
(with or without the charger connected).
Hope this helps..
Sent from my HUAWEI MT1-U06 using xda app-developers app
Click to expand...
Click to collapse
Agreed. Or try holding all three buttons (pwr/volume +/_-) and wping/ clearing data then any ROM from SDcard (dload)
Thanks gooz n syaah.
It seems when i connected to cable to charge its not charging but turn on and stuck on the huawei logo. Cant turn it off except if i disconnect the cable. Theres no led light when connect to cable too.
When i press both vol button it will start the sdcard update but stuck in the last 'Checking Module SYSTEM' and when its in middle loading it restarted either back to the sdcard update or stuck in the logo screen.
I did left the phone stuck on the logo for a night hoping it will deplete the batt but to no avail. Still the same situation.
T28#HOX
Hello !
As I can see , you are able to use TWRP Recovery !
Now you can test a beta CyanogenMod 10.1 , should be ok also on HAM !
Good luck !
surdu_petru said:
Hello !
As I can see , you are able to use TWRP Recovery !
Now you can test a beta CyanogenMod 10.1 , should be ok also on HAM !
Good luck !
Click to expand...
Click to collapse
Do you really think it's possible? do we have a device tree now?
i have your TWRP on my device and it works just PERFECT.
Hello,everybody,since no developers working on custom rom for P20,we have to flash a treble rom,or,like you see here,flash a P20pro rom.
After several days trying,I finally suggest you to flash the lineage15.1 rom ported to P20 pro from Luk.
Now,it's time to escape from Huawei EMUI，out of the limit(like more apps background running).
What's the good thing?
Fingerprint yes! Fast charge yes! Full screen apps yes! Even stock camera(from Androlark).
Any bugs?
NFC(not working at all) ,wifi-hotspot(you can use USB tethering instead).
Here is a guide for flashing:
Before you go,make sure a unlocked bootloader,and twrp for installing gapps/migisk/stock camera.And you must do a full factory reset,it's very important ,otherwise the rom can't boot.
A flashable system.img link(extract from Luk's P20 pro rom)
One-click ADB
Flash it using ADB tool.
Type the following line:
Code:
fastboot erase system
Code:
fastboot -u flash system p20-lineage15.1-system.img
Then reboot.
If you want to flash gapps,after boot worked,turn the "Developer options"-"Advanced restart",then reboot to twrp,wipe data cache dalvik again(it's necessary,if not ,you will see the apps forceclosing again and again)
Cheers:highfive:
Thanks @LuK1337 again
Reserved for Q&A.
Thanks for the thread man !
But with the upcoming update of Pie, i will wait a little bit before jumping on a new rom than the EMUI, otherwise i would already installed it.
maxime4611 said:
Thanks for the thread man !
But with the upcoming update of Pie, i will wait a little bit before jumping on a new rom than the EMUI, otherwise i would already installed it.
Click to expand...
Click to collapse
I can't wait,so I flash the rom. Apart from that,I also like original Android,with much more freedom
qisu2011 said:
I can't wait,so I flash the rom. Apart from that,I also like original Android,with much more freedom
Click to expand...
Click to collapse
Finally able to boot on the rom.
If you have trouble for install : try a different version of adb, and after a full factory reset, go to twrp and wipe dalvik, cache and internal storage again then flash.
How come hotspot is broken here but not on the official Treble Lineage 15.1 ?
maxime4611 said:
Finally able to boot on the rom.
If you have trouble for install : try a different version of adb, and after a full factory reset, go to twrp and wipe dalvik, cache and internal storage again then flash.
Click to expand...
Click to collapse
That's right bro,sorry I didn't help you in time yesterday,I'm in China,there's a time difference between us.
Upload an ADB tool I'm using,for those who need it.
One-click ADB
Thanks for the tool
- Fingerprint working
- Root & magisk supported.
- Stock Camera mod also works
- Always on display (but i really don't like it and no stock setting to disable it completely, only hide it when you turn off the screen)
So far the bugs i encounter are:
- No notch support (but icons are spread between the edge of the status bar, so only the speed meter is hidden in my case)
- The home button only works for fingerprint sensor if you have virtual button enabled.
-NFC ? (i don't use it)
Here's some screenshots to show the notification system's behavior (yes, they are expandable from the notification drawer and lockscreen :good: )
I attach a link for a simple script tool that I have used which is very useful for creating flashable system images from system.new.dat.br and system.transfer.list files.
Extractor 3.5
I have attached this so that people can make their own system image files when the Linage OS rom is updated rather than wait for someone to upload their own image files.
Instructions
1. Extract Extractor folder from attached zip.
2. Extract system.new.bat.br and system.transfer.list from rom zip file.
3. Place files in folder labelled "place_for_supported_files_here".
4. Run Extraktor_EN.cmd
5. Select option 9.
6. Use the system.new.img and flash using fastboot as detailed in the original post.
maxime4611 said:
Thanks for the tool
- Fingerprint working
- Root & magisk supported.
- Stock Camera mod also works
- Always on display (but i really don't like it and no stock setting to disable it completely, only hide it when you turn off the screen)
So far the bugs i encounter are:
- No notch support (but icons are spread between the edge of the status bar, so only the speed meter is hidden in my case)
- The home button only works for fingerprint sensor if you have virtual button enabled.
-NFC ? (i don't use it)
Here's some screenshots to show the notification system's behavior (yes, they are expandable from the notification drawer and lockscreen :good: )
Click to expand...
Click to collapse
There are options in system settings bro.
Display-advanced
At first thanks for your work :good:
Which one of Luk's builds you took?
The new (25.09.2018) or the old (28.08.2018) one ?
Schubi97 said:
At first thanks for your work :good:
Which one of Luk's builds you took?
The new (25.09.2018) or the old (28.08.2018) one ?
Click to expand...
Click to collapse
new
Man, I really want Lineage 16 instead... I've had no luck finding any Pie based rom for the P20.
qisu2011 said:
There are options in system settings bro.
Display-advanced
Click to expand...
Click to collapse
Exact i checked the same options, but when you receive a notification, it still displays the notification on the ambiant display mode... When you turn on the phone or touch it, you activate the lockscreen.
With that black screen, i miss notifications if the phone is laying on the table for exemple ...
Muscar said:
Man, I really want Lineage 16 instead... I've had no luck finding any Pie based rom for the P20.
Click to expand...
Click to collapse
That's the problem,no pie rom for p20 can boot except emui9 beta at the moment. I tried all I could find, including aosp pie for Honor v10,which is based on emui8.1 vendor,can boot on p20 pro.
USB C headphones doesn't work
Theo1218 said:
USB C headphones doesn't work
Click to expand...
Click to collapse
No they dont, adapter works..
maxime4611 said:
Exact i checked the same options, but when you receive a notification, it still displays the notification on the ambiant display mode... When you turn on the phone or touch it, you activate the lockscreen.
With that black screen, i miss notifications if the phone is laying on the table for exemple ...
Click to expand...
Click to collapse
I have tested for days bro,it's normal on my phone.
I flashed the rom based EMUI version 167sp1(for CN EML-AL00). Maybe this is the point?
maxime4611 said:
Exact i checked the same options, but when you receive a notification, it still displays the notification on the ambiant display mode... When you turn on the phone or touch it, you activate the lockscreen.
With that black screen, i miss notifications if the phone is laying on the table for exemple ...
Click to expand...
Click to collapse
I have tested for days bro,it's normal on my phone.
I flash the rom based EMUI version 167sp1(for EML-AL00),could this be the point?
Anyone tried this on their P20 yet?
https://forum.xda-developers.com/hu...r-forget-emui-9-install-aosp-android-t3855930
Code:
[B][U]Disclaimer:[/U][/B]
I am not responsible for any damage to you your device. Everything you do, you do on your own risk!
Last year I got a Galaxy Tab E (SM-T560) from Samsung for free as gift to my new mobile phone.
Unfortunately the ROMs for SM-T560NU tabs are not working on that device, but I found a working ROM of LineageOS 14.1 (Android Nougat 7.1.2) on the following page:
How to install Android Nougat on the Galaxy Tab E (SM-T561)
Click to expand...
Click to collapse
Original source (Russian language)
Click to expand...
Click to collapse
LineageOS 14.1 (formerly known as CyanogenMod) ROM is based on the Android stock ROM released by Google, which the LineageOS team modifies.
Credits go to the LineageOS team for making this ROM available to many devices and to independent developers like Ma3a_XaTa for porting this ROM to the Tab E SM-T561.
Click to expand...
Click to collapse
Just installed it to my tab and it seems working well!
I used the instructions from a comment at the bottom of the page:
Downloads:
ROM: LineageOS 14.1
Gapps: The Open GApps Project
Boot Image: boot.img
SoftKeyFix: KeyFix
Recovery: TWRP Recovery for Tab E
Root: SuperSU
Click to expand...
Click to collapse
Prerequisites:
1. Make sure you have TWRP 3 installed (HowTo)
2. Move the downloaded files to your Micro SD Card (>4GB recommended)
3. >50% battery charge
4. Some patience.
Click to expand...
Click to collapse
Installation:
1. Boot to TWRP 3 (Power + Home + Volume Up) and Swipe to allow modifications
Note: Make sure to Backup EFS and Modem to Micro SD Card in TWRP.
2. Wipe > Advanced Wipe > (Select Dalvik Cache, System, Data, Internal Storage, Cache ONLY) > Swipe to WIPE
3. Install > Select Storage > Micro SD Card > Select lineage-14.1-20180419-UNOFFICIAL-gtel3g.zip
4. Add More Zips > open_gapps-arm-7.1-pico-2018xxxx.zip
5. Add More Zips > keys.zip
6. Swipe to confirm flash and wait for 5-10 mins
7. After the Flash process DO NOT restart system.
8. Go back to Install > Install Image > boot.img > Select Boot Partition > Swipe to confirm flash
9. After the boot.img has been flashed DO NOT restart system IF you want Root.
10. Go back to Install > Install Zip > SR3-SuperSU-v2.82-SR3-20170813133244.zip > Swipe to confirm flash
11. Now Restart System.
12. Wait 10-15 mins, it will take some time.
13. Enjoy Lineage OS!
Click to expand...
Click to collapse
Known bugs:
- Charging while the device is off works, but does not show battery charge indicator animation.
Click to expand...
Click to collapse
Good luck and enjoy!
Code:
[B][U]Miscellaneous:[/U][/B]
[URL="https://www.hardreset.info/devices/samsung/samsung-t560-galaxy-tab-e-96-wifi/download-mode/"]HowTo bring the Tab to DownloadMode[/URL]
Hints & Tips:
1. To improve the speed of the tablet, turn of animations inside Developer Options.
2. You can also install an app freezer called "Icebox" to temporarily disable RAM hungry apps like Facebook, Chrome etc.
3. To ensure longer battery life, disable “double tap to wake” hidden somewhere in the settings (use the app called "Kernel Adiutor" from the Playstore).
4. If you don’t plan to put a SIM on this thing or if you are having a SM-T560 only, put it in airplane mode and then turn on your WiFI when needed. Turn of GPS/location or even sync when not necessary.
5. Disable "Adaptive Display" in the settings. It seems to make the tablet slower.
6. Improve the battery life of the tab by using an app called “L Speed“ (available in Playstore).
Hello, great post. I used this ROM before, but after some time it just stops working. You can't boot it anymore.
How long do you use it already?
mimuta said:
Hello, great post. I used this ROM before, but after some time it just stops working. You can't boot it anymore.
How long do you use it already?
Click to expand...
Click to collapse
I'm using it now for approx. 3 weekswithout any problems. How long did you use it?
BR, See
SeeDoubleYous said:
I'm using it now for approx. 3 weekswithout any problems. How long did you use it?
BR, See
Click to expand...
Click to collapse
I was wondering what version are you running? Everytime j download one it fails to flash through TWRP? You got a link to a download ??
V3rdeV1ntage said:
I was wondering what version are you running? Everytime j download one it fails to flash through TWRP? You got a link to a download ??
Click to expand...
Click to collapse
What version of TWRP are you using & what error do you get?
Have someone passed safetynet check ? Can you help me with pass?
The ROM is running ok so far on my T560, but I noticed some problems:
* If the tablet runs out of battery with Wifi activated, charging and booting it up causes a boot loop until Wifi is turned off. Something like that... it sometimes gives you the time to open the settings and turn off Wifi before it reboots.
* The Tablet's battery is drained by "Mobile Standby" in approx. two days, regardless of power save, battery saver and/or flight mode. When the Tab is idle all the time, the battery graph runs down in a straight diagonal line until the battery is empty, approx. 2 % per hour. Did not find a way to disable Mobile Standby on my T560 which doesn't even have a modem (maybe that's the problem).
* The system is a bit laggy given that it's a quad core, but turning off Animations helped. I suspect hardware acceleration does not work.
I'd switch to a better rom if I find one. But thanks anyways for the information and work! Better than nothing, I guess
Problems of ignition and charge of battery
Hello friends, I need a help I have a Samsung Tab E 9.6 = SM.T561, I installed Roon Custom Lineage 14.1 with TWRP, but the Tablet was downloaded and I can not charge it or turn it on, I searched everywhere and nobody gives me answers . I appreciate the help given. Thank you
Hi, I hope someone who has tried this rom can give me some feedback on it. My main concern its if this is stable and faster than ron. Any idea?
s5minimalist said:
The ROM is running ok so far on my T560, but I noticed some problems:
* If the tablet runs out of battery with Wifi activated, charging and booting it up causes a boot loop until Wifi is turned off. Something like that... it sometimes gives you the time to open the settings and turn off Wifi before it reboots.
* The Tablet's battery is drained by "Mobile Standby" in approx. two days, regardless of power save, battery saver and/or flight mode. When the Tab is idle all the time, the battery graph runs down in a straight diagonal line until the battery is empty, approx. 2 % per hour. Did not find a way to disable Mobile Standby on my T560 which doesn't even have a modem (maybe that's the problem).
* The system is a bit laggy given that it's a quad core, but turning off Animations helped. I suspect hardware acceleration does not work.
I'd switch to a better rom if I find one. But thanks anyways for the information and work! Better than nothing, I guess
Click to expand...
Click to collapse
I have my T560 all the time in airplane mode with Wifi on. Battery drain is no problem at all.
It is also written in my second post:
HTML:
https://forum.xda-developers.com/showpost.php?p=78977223&postcount=2
aribetty said:
Hello friends, I need a help I have a Samsung Tab E 9.6 = SM.T561, I installed Roon Custom Lineage 14.1 with TWRP, but the Tablet was downloaded and I can not charge it or turn it on, I searched everywhere and nobody gives me answers . I appreciate the help given. Thank you
Click to expand...
Click to collapse
I had a similar problem in the beginning. Seemed as the tab was in a bootlooporsomething similar with black screen.
The only solution I found was to wait some days until the battery was empty, charge the tab and directly started to download/recovery mode and flash it again.
Now it is working fine with this ROM.
Rittachi said:
Hi, I hope someone who has tried this rom can give me some feedback on it. My main concern its if this is stable and faster than ron. Any idea?
Click to expand...
Click to collapse
I am using it now for ~2.5 months and I am quite happy with it.
It is much better then the stock ROM.
Hi @SeeDoubleYous and guys. I was reading the Forum and decided to share with you my experience with this ROM. Well, I'm owner of a SM-T560 (in US and Canada this model is T560NU I don't know why it's different just in these two countries ). Anyway....
I made all the steps described on the step-by-step Instructions. (TWRP Recovery via ODIN, Root, ROM, GAPPS, etc etc etc).
I'll be honest with you. My t560 turned in a piece of sh... Very Slow, Apps Stucking all the time, sometimes bootlooping too... i used the Tab for almost 3 weeks. After that I decided to reset the device and I did all steps again using the same ROM (I reinstalled the TWRP RECOV via ODIN, proceeded a Factory + Internal Memory Wipe, Installed the LINEAGE 14.1 OS, etc, etc, etc) But this time I choose the "Micro" GAPPS option instead "PICO". Installed Root SU, etc, etc exactly as the directions wrote in the top page.
For my surprise, It's perfect Now!!!! ROM is great.... No problems of RAM, Bootlooping, Stucking, APP crashing... Absolutelly Nothing!
I don't know why, but it seems that the secret is install for first time and use for some weeks even its is not working fine. And After that, proceed All the step-by-step again from the very beggining. (Reinstall TWRP, ROM, GAPPS, Keys, "Boot Image" and ROOT SU). It will work fine on SM-T560 just from the second Install on.....
All Best guys
I need help. My screen is stuck on boot again
Am I bricked?
Hi guys, I've got a T560 tablet with the official ROM and I'm researching to upgrade it's software.
Currently I'm away off-shore for work but as soon as I get home I'll try this ROM.
I've been a fan of CyanogenMod since the early days and I'm eager to try it so I can bring some new life into my old tablet.
Since this ROM is for the SIM card variant T561 I was searching for a way to disable the Radio altogether and I found this:
https://android.stackexchange.com/q...le-radio-signal-in-a-phone-without-a-sim-card
Basically it disables the RIL with a simple Terminal Command:
Code:
su -c "setprop persist.radio.noril 1"
Can someone try this and see if its working properly? (OFC after a Back-up is done) Its persistent through reboots so you don't need to use Airplane Mode anymore and maybe it will help with the battery draining problem.
Also one question for the guys who are currently using this ROM:
Is Magisk working? After everything is set-up can we uninstall SuperSU and install Magisk for root?
Thank you,
Have a nice day!
SpawNyK said:
Code:
su -c "setprop persist.radio.noril 1"
Click to expand...
Click to collapse
I've tried the command and it worked, no reboots even if the airplane mode is off and no problem so far.
I don't know if the battery life is better now because I've just done it.
For the other question, I haven't tried because I like SuperSu, but I think there's no problem.
gucio1976 said:
And what do you think about it.
https://mega.nz/#!49QXRIAb!7FtqWknBNzIe5-Ak-Jgmq7N71JB4TcGEi-MjuQCuvhw
Click to expand...
Click to collapse
Can you please provide a guide for flashing this?
Like which GApps version should I use, etc...
I get in red, does something affect ROM? e: unknown command [log]
Hey,
does this rom works with SM-T562??? (3G)
Is there any updated ROMs like LOS 15 or 16 for SM-T561 (gtel3g), I tried to Port LOS 16 but I get error 7 while flashing in TWRP(V3).
gucio1976 said:
And what do you think about it.
https://mega.nz/#!49QXRIAb!7FtqWknBNzIe5-Ak-Jgmq7N71JB4TcGEi-MjuQCuvhw
Click to expand...
Click to collapse
gucio1976 said:
I found it here .
https://www.youtube.com/watch?v=-4h_3qDRiv8
Click to expand...
Click to collapse
Why should you use the old version, if this thread offers a newer one?
gucio1976 said:
---------- Post added at 11:33 ---------- Previous post was at 11:13 ----------
Something else. Maybe it will be useful to someone.
https://www.youtube.com/watch?v=7JpUomQs2ok
Click to expand...
Click to collapse
I think that's the same version as offered here...
shreejalm said:
Is there any updated ROMs like LOS 15 or 16 for SM-T561 (gtel3g), I tried to Port LOS 16 but I get error 7 while flashing in TWRP(V3).
Click to expand...
Click to collapse
I did not find any new version. The ones available are only working with the SM-T560NU....
Sorry!
This is NOT my work (Ianmacd) and guide is written by Mr Pickles all credits to him for his install method.
Also this is just a copy and paste but the guide is well written and TWRP should cause less issues.
I'm sure Gieti94 is just perhaps busy with other commitments, credit also to him for his fantastic efforts.
Just a new space for the currently working TWRP so all don't get in a pickle.
----------------------------
Download Maintained By Pickles (best all in one convenient place) will have everything necessary for twrp functionality. Credit to pickles.....:good:
http://bit.ly/2VlcqYd
Excellent installation Guide below
Install Guide
---------------------------
- NOT A SINGLE STEP IS UNNESSECARY
- DO THEM _ALL_ EXACTLY!
- ALL YOUR DATA WILL BE GONE - BACKUP!
---------------------------------------
DO NOT INSTALL MODPACK FROM SOLDIER - IT BREAKS TWRP!
---------------------------------------
If you have any problems - contact @PiCkLeS or on Telegram by PiCkLeS or @rp4k
---------------------------------------
All development is by @ianmacd (Ian Macdonald).
---------------------------------------
0 - No matter what you have today, no root or Magisk-only solution or TWRP with Magisk-solution, do ALL the steps..
1 - Make sure you copy the "Magisk_Manager_Ian_install.apk" file and "Multidisabler-g97x_by_Ian.zip" file to your sd-card before you start!
2 - Download latest firmware via Samfirm or Frija or in any way you can, and unpack.
3 - Boot your phone to Download mode (Power+Bixby+VolDown) and remember to have the USB connected to your computer, it won't boot to DL-mode otherwise
4 - Keep autoboot etc in Odin settings, put each file in its place (AP, BL, CSC etc) and _dont_ use HOME_CSC, use CSC-only-file.
5 - After Odin is done, your phone will reboot automatically - let it! It can feel like forever, but let it do its restarts and stuff until you are in system-setup
6 - Do the setup as per usual, CONNECT TO WIFI but you can safely just say Skip on sign in and other stuff
7 - When setup says its all finished and you get to the standard launcher - go into Settings and enable Developer settings
8 - This step IS necessary.. If you don't do this step, you might get in pre-normal rrm state and you will have wait 7 days to try again: Enter Developer settings and look for the "OEM Unlock" switch - if you are rooting for the first time, Enable it. If you already have root since before or unlocked your bootloiader before, just confirm that its Enabled and graded out.
9 - If you already have an unlocked bootloader, skip to step 12. If not, continue with step 10.
10 - IF you never have unlocked your bootloader before, Power off the phone and boot into download mode again. You will see the long press volUp option for unlock bl, do that.
11 - IF you never have unlocked OEM before, boot the phone again, do the setup without signing in etc but connect to wifi, enable dev settings, go into dev settings and check that OEM now is enabled and grayed out.
12 - Reboot the phone in recovery mode (Power+Bixby+VolUp and keep holding until you are in stock recovery. Choose and do a factory reset.
13 - Reboot to bootloader with option in Recovery.
14 - Flash the tar you got (S10x-TWRP+Magisk_fixed_by_Ian.tar I Odin in the AP-slot. DISABLE auto reboot in Odin first!
15 - When the tar has flashed - Do as instructed on the phone, hold Power+VolDown for a few seconds and AS SOON AS THE SCREEN GOES BLACK -> quickly press power+bixby+volUp for a _long_ time, and I mean it can feel as if its a full minute! After a while you will see TWRP starting with its start screen, you can now let go and enter TWRP.
16 - FORMAT data, then WIPE data AND Cache. DO NOT LET IT REBOOT
17 - Flash "Multidisabler-g97x_by_Ian.zip" from SD card
18 - Go back to start screen of TWRP, Choose Reboot, Choose Recovery - YOU MUST ALWAYS CHOOSE REBOOT TO RECOVERY and _NOT_ system!
19 - Let the phone reboot into system, it will do some reboots it self, and again it will feel like it takes FOREVER - Just let it do its thing and DO NOT PRESS ANY KEYS!
20 - When your phone is finally done booting, just do the normal setup/signing for real this time.
21 - When you are done and in system/launcher, install "Magisk_Manager_Ian_install.apk" from SD card and verify that you now have Magisk Manager installed.
22 - Start Magisk Manager and say YES to what it says, it will do some stuff and then say "Rebooting in 5 seconds" - LET IT BOOT AND DO NOT TOUCH ANY KEYS this time either..
23 - Now when booted to system, start Magisk Manager and see that you have all green and its installed.
24 - Now you have root.
** Every time you reboot manually, be prepared to hold Power+Bixby+VolUP until you see the Samsung S10x-logo, then release and let it reboot, you will have root.
** Every time you power off the phone, when you power ON again, hold Power+Bixby+VolUP until you see the Samsung S10x-logo, then release and it will boot with root.
** Every time you want to enter TWRP-recovery, do as above but KEEP HOLDING THE KEYS UNTIL TWRP-start screen shows then release. Remember to choose reboot to recovery afterwards and you will boot with root.
** IF you screw up and forget or miss the key combo, just let it boot to system, immediately when system is up - reboot again and do the key combo and all is fine again.
This is me just trying to get an emergency first aid space, nothing more, I'm NOT trying to take any credits or dismiss Gieti94.
Thanks All
Duncan1982 said:
This is NOT my work (Ianmacd) and guide is written by rp4k all credits to him for his install method.
Click to expand...
Click to collapse
This is my tutorial and not r4pk. And I'd prefer that you use the download I provide here and no where else to make sure the right files gets downloaded when updated.
http://bit.ly/2VlcqYd
/P
Yea I can keep the OP updated, this is just an emergency first aid thread, thanks to Pickles for his well written guide.
I'm really not wanting to offend anyone, just for all to make life a bit easier....
very nice to have a reliable twrp solution, pitty that we don't have too many things to flash in recovery
Please remove the alternate download link, I have updated the multidisabler zip with a important update, v1.1 and the one download link for all is just for things like that, the other download link still have the old zip.
Very important that everyone uses Ian Macdonald's new v1.1 multidisabler script.
/P
I can update the mega link with the new disabler I reposted it to mega because I can't access Google @PiCkLeS
And yes I never said I wrote the guide I just added myself for helping people
rp4k said:
I can update the mega link with the new disabler I reposted it to mega because I can't access Google @PiCkLeS
Click to expand...
Click to collapse
I understand. But that doesn't seem to be a big problem for any one else and the bigger problem is that you risk having a link that is being used by the people only see it here and don't read anywhere else, or this message, and end up with old information or even worse, outdated files.
I can help you get the files on PM but please remove these links outside of my drive, which I maintain every day and keep up to date. It's not for vanity, it's for safety.
For now please edit your text and remove the link. All must use v1.1 of the multidisabler zip by Ian.
/P
Maybe this thread was a bad idea, as stated I am around and willing to keep things up to date
I know the importance, and how things are at present.
Duncan1982 said:
Maybe this thread was a bad idea, as stated I am around and willing to keep things up to date
I know the importance, and how things are at present.
Click to expand...
Click to collapse
Listen, just to be clear. I and I dont think Ian have a problem with you having this thread.
All I am worried about is the download link. Things can and are happening fast. If there are multiple sources for downloading files in this case, and today one was updated with important improvements, and there are many places to download from people can miss that and download old files that can cause big problems.
Keep the downloading to one good source and everything will be fine. The thread in it self can do much good by showing that there is an alternative, it works and right now almost 100 people in 24 hours have used it. Fantastic!
So I dont think it was a bad idea, I just dont want PM:s from people in a week or two asking why their device suddenly lost data, only to find out that they downloaded from a source that didnt have the latest files.
Thats all.
//P
PiCkLeS said:
Listen, just to be clear. I and I dont think Ian have a problem with you having this thread.
All I am worried about is the download link. Things can and are happening fast. If there are multiple sources for downloading files in this case, and today one was updated with important improvements, and there are many places to download from people can miss that and download old files that can cause big problems.
Keep the downloading to one good source and everything will be fine. The thread in it self can do much good by showing that there is an alternative, it works and right now almost 100 people in 24 hours have used it. Fantastic!
So I dont think it was a bad idea, I just dont want PM:s from people in a week or two asking why their device suddenly lost data, only to find out that they downloaded from a source that didnt have the latest files.
Thats all.
//P
Click to expand...
Click to collapse
I fully appreciate and understand that, the reason I created as I have plenty of time to maintain, and will keep it up to date I have been around for quite some time, if you look at my posts (search) I have had almost every device you can think of, currently have the Vivo IQOO also, I have enough experience to understand the important and implications.
I don't want your PM's to be going crazy so I'll fully respect your decisions and will keep everything updated also. But it is better if everything is tody and not one thing here and there, OP has been updated with your direct link, is this cool?
Just thought by creating this thread that it might help, my sincere and good intentions are hopefully evident
PiCkLeS said:
Please remove the alternate download link, I have updated the multidisabler zip with a important update, v1.1 and the one download link for all is just for things like that, the other download link still have the old zip.
Very important that everyone uses Ian Macdonald's new v1.1 multidisabler script.
/P
Click to expand...
Click to collapse
Can I install multi Disabler 1.1 withouth lost data?
zubi182 said:
Can I install multi Disabler 1.1 withouth lost data?
Click to expand...
Click to collapse
Yes just flash it in twrp, nothing will be lost.
/P
I assume this is only for the Exynos version? Or does it work for Snapdragon as well?
mistermidas said:
I assume this is only for the Exynos version? Or does it work for Snapdragon as well?
Click to expand...
Click to collapse
You have a working snapdragon root? How did you get past step #9 of launching stock recovery after you flashed magisk
rp4k said:
You have a working snapdragon root? How did you get past step #9 of launching stock recovery after you flashed magisk
Click to expand...
Click to collapse
Man... did you even read my comment???
I was asking if this would work for Snapdragon, not saying I got it to work. It doesn't mention if it's a method for both versions in the OP or not.
mistermidas said:
Man... did you even read my comment???
I was asking if this would work for Snapdragon, not saying I got it to work. It doesn't mention if it's a method for both versions in the OP or not.
Click to expand...
Click to collapse
Sorry I responded when I was half asleep. My fault.
I will try this out and post and update, i had no luck with previous twrp, always boot loops regardless of what i do.
My bootloader is unlocked but not grayed out. Can i still do it?
mercifool said:
I will try this out and post and update, i had no luck with previous twrp, always boot loops regardless of what i do.
My bootloader is unlocked but not grayed out. Can i still do it?
Click to expand...
Click to collapse
Yes, just do exactly all the steps and use the new files in the link and you will be fine.
//P
deleted
Carotix said:
hi ,
do you have the OEM switched to on?
if not , you need it ..... if you can't get it because you are waiting the 7 days , you can make this trick
open settings and set the date 8 days before ... then reboot
so you can enable OEM in developer settings
Click to expand...
Click to collapse
Hi there, are these instructions for Exynos only or can I apply it to Snapdragon as well, please advise. Thank!
Was over 2gb, currently installing on my At&t S10+.
Probably not going to do a factory reset today, but will within the week. I usually do that on major updates.
tele_jas said:
Was over 2gb, currently installing on my At&t S10+.
Probably not going to do a factory reset today, but will within the week. I usually do that on major updates.
Click to expand...
Click to collapse
Changelog?
tele_jas said:
Was over 2gb, currently installing on my At&t S10+.
Probably not going to do a factory reset today, but will within the week. I usually do that on major updates.
Click to expand...
Click to collapse
Good grief! 2GB!?!?! I have an AT&T S10+ here and I have yet to receive the update. I don't know if I even want it, but I know my phone will force it eventually.
This is beautiful news because now the unlocked model (U1) will get it officially soon as well.
Baseband version:
G970USQU2CSKP (GS10e)
G973USQU2CSKP (GS10)
G975USQU2CSKP (GS10+)
G977UUCS3YSJM (S10 5G)
Still no update here, AT&T is slow getting the update to my phone. I am kind of thankful as I like Android 9. And no I haven't tried to manually do it either.
Downloading now.
StoneyJSG said:
Still no update here, AT&T is slow getting the update to my phone. I am kind of thankful as I like Android 9. And no I haven't tried to manually do it either.
Click to expand...
Click to collapse
You can install any vendors rom since all US S10+ are the same. It will setup according to the installed sim card, if you odin in the rom. You don't have to wait for AT&T, just install any CSKP rom for the U version. They have not released the U1 version yet.
StoneyJSG said:
Still no update here, AT&T is slow getting the update to my phone. I am kind of thankful as I like Android 9. And no I haven't tried to manually do it either.
Click to expand...
Click to collapse
Thankful? Android 10 is not a major update, so you'll hardly notice any difference.
Oh I know, just waiting for AT&T to force the update on me so I don't have to ODIN around and it wipe all my data from flashing a ROM.
HolyHog said:
You can install any vendors rom since all US S10+ are the same. It will setup according to the installed sim card, if you odin in the rom. You don't have to wait for AT&T, just install any CSKP rom for the U version. They have not released the U1 version yet.
Click to expand...
Click to collapse
I thin you can do the same for the U1 versions, it's all the same across all carriers as well as the unlocked version.
Sent from my SM-G973U1 using Tapatalk
barondebxl said:
I thin you can do the same for the U1 versions, it's all the same across all carriers as well as the unlocked version.
Sent from my SM-G973U1 using Tapatalk
Click to expand...
Click to collapse
Yes, you can. I was on the beta 10 program with a U1 version and just loaded a U version of the official release to get off that beta. As soon as they make the U1 official, I will load it up.
HolyHog said:
Yes, you can. I was on the beta 10 program with a U1 version and just loaded a U version of the official release to get off that beta. As soon as they make the U1 official, I will load it up.
Click to expand...
Click to collapse
Ehy would you load it up if it's the same? Just curious. Where can I grab the S10 version?
Sent from my SM-G973U1 using Tapatalk
barondebxl said:
Ehy would you load it up if it's the same? Just curious. Where can I grab the S10 version?
Sent from my SM-G973U1 using Tapatalk
Click to expand...
Click to collapse
The U1 version has no vendor apps or bloat. The ROM itself installs smaller on your phone. The main reason I do it is to not have vendor apps installed that I will never use and typically can't un-install.
I get my roms from www.sammobile.com. It is slow download but always finishes properly. They also seem to be the first source to have the latest versions.
HolyHog said:
The U1 version has no vendor apps or bloat. The ROM itself installs smaller on your phone. The main reason I do it is to not have vendor apps installed that I will never use and typically can't un-install.
I get my roms from www.sammobile.com. It is slow download but always finishes properly. They also seem to be the first source to have the latest versions.
Click to expand...
Click to collapse
Thanks man. Do they have it for the regular S10? And do I flash it via Odin? I always forget how to do this.
Sent from my SM-G973U1 using Tapatalk
barondebxl said:
Thanks man. Do they have it for the regular S10? And do I flash it via Odin? I always forget how to do this.
Sent from my SM-G973U1 using Tapatalk
Click to expand...
Click to collapse
Yes, search for phone model as a U model.
Here are the instructions Sammobile gives you:
Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
Add each file to its respective field in Odin v3.14.1.3B Use CSC_*** if you want to do a clean flash OR HOME_CSC_*** if you want to keep your apps and data.
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP then USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Option 6 (Note10) POWER + VOLUME UP
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
© 2019 SamMobileSupportTeamGiveawayContactTerms & ConditionsPrivacy & CookiesPartner: Galaxy Club
HolyHog said:
Yes, search for phone model as a U model.
Here are the instructions Sammobile gives you:
Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
Add each file to its respective field in Odin v3.14.1.3B Use CSC_*** if you want to do a clean flash OR HOME_CSC_*** if you want to keep your apps and data.
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP then USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Option 6 (Note10) POWER + VOLUME UP
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
[emoji2398] 2019 SamMobileSupportTeamGiveawayContactTerms & ConditionsPrivacy & CookiesPartner: Galaxy Club
Click to expand...
Click to collapse
You rock thanks man!
Sent from my SM-G973U1 using Tapatalk
Does anyone have the AT&T user data file that comes with the One UI 2.0 update? I flashed the update without the user data file and I suspect that might have something to do with why my advanced messaging option (RCS) is no longer working in Samsung Messages.
Jomino said:
Does anyone have the AT&T user data file that comes with the One UI 2.0 update? I flashed the update without the user data file and I suspect that might have something to do with why my advanced messaging option (RCS) is no longer working in Samsung Messages.
Click to expand...
Click to collapse
For the user data file, talk to @iBowToAndroid about that.
My RCS in Samsung messages stopped working on the BSIP build. Currently on BSIW. AT&T hasn't forced me to update to Android 10 yet.
StoneyJSG said:
For the user data file, talk to @iBowToAndroid about that.
My RCS in Samsung messages stopped working on the BSIP build. Currently on BSIW. AT&T hasn't forced me to update to Android 10 yet.
Click to expand...
Click to collapse
So I've used @iBowToAndroid's AT&T user data file in the past with flying colors, but I wonder if AT&T has possibly altered the file with the new update? Probably not but right now i'm backing up my phone and doing a factory reset to see if that fixes anything.