Develop Bugs

Moto z problems

Phone - Moto Z play XT1635-02-DS
Android- 7.1.2
Installed TWRP 3.1.1.0
Viper addison 7.1.2
Here are my problem:
1. Flashed with supersu v2.79 and also v2.82, neither works. Phone still not rooted. When i tried toa access supersu app, it says "there is no su binary installed and supersu can't install it..."
2. Camera does open but it doesn't function, it stays dark. (I have custom gapps 7.1.x)
3. Proximity sensor does not seem to be working in other cases, but the phone goes dark as soon as i press dial or as soon as i pick a call and remains so untill the other party cuts the call. Otherwise i need to shut down the phone if i have to end the call from my phone.
4. When i shut down the phone, in order to reboot manually from recovery-reboot-bootloader. Otherwise it remains in twrp recovery.
Can anyone help please?

Have you tried flashing back to stock and seeing if that fixed these issues?

Pal Guite said:
Phone - Moto Z play XT1635-02-DS
Android- 7.1.2
Installed TWRP 3.1.1.0
Viper addison 7.1.2
Here are my problem:
1. Flashed with supersu v2.79 and also v2.82, neither works. Phone still not rooted. When i tried toa access supersu app, it says "there is no su binary installed and supersu can't install it..."
2. Camera does open but it doesn't function, it stays dark. (I have custom gapps 7.1.x)
3. Proximity sensor does not seem to be working in other cases, but the phone goes dark as soon as i press dial or as soon as i pick a call and remains so untill the other party cuts the call. Otherwise i need to shut down the phone if i have to end the call from my phone.
4. When i shut down the phone, in order to reboot manually from recovery-reboot-bootloader. Otherwise it remains in twrp recovery.
Can anyone help please?
Click to expand...
Click to collapse
This is not really a problem with the phone per se but the rom you chose to flash. The reboot issue can be checked by setting a command at bootloader using "fastboot oem fb_mode_clear".

gman88667733 said:
Have you tried flashing back to stock and seeing if that fixed these issues?
Click to expand...
Click to collapse
Thanks. But i don't have the stock rom. I didn't intend to use a custom rom. I tried to root it to recover some deleted photos and the moron that i am, i didn't back up the stock firmwares and while tweaking around in the recovery i somehow deleted the stock rom. This is my 1st time...

DroneDoom said:
This is not really a problem with the phone per se but the rom you chose to flash. The reboot issue can be checked by setting a command at bootloader using "fastboot oem fb_mode_clear".
Click to expand...
Click to collapse
Thanks... I tried the above command (it does recognize my device) bur this is what i get :
{bootloader} slot-count: not found
{bootloader} slot-suffixes: not found.

Pal Guite said:
Thanks... I tried the above command (it does recognize my device) bur this is what i get :
{bootloader} slot-count: not found
{bootloader} slot-suffixes: not found.
Click to expand...
Click to collapse
Is there an option for the bootloader in developer settings in your rom similar to the screenshot I attached? Make sure it's enabled.

DroneDoom said:
Is there an option for the bootloader in developer settings in your rom similar to the screenshot I attached? Make sure it's enabled.
Click to expand...
Click to collapse
Thanks for your concern. Developer option is 'on' and Multiprocess webView renderers seperately - 'on'. But i get the same problem. (and how do you attach screenshots ? I don't see any option for attaching files) In anycase, like you said, i think the problem has more to do with the rom. Can you please suggest me another rom or if possible link from where i can download stock rom for my phone.

Pal Guite said:
Thanks for your concern. Developer option is 'on' and Multiprocess webView renderers seperately - 'on'. But i get the same problem. (and how do you attach screenshots ? I don't see any option for attaching files) In anycase, like you said, i think the problem has more to do with the rom. Can you please suggest me another rom or if possible link from where i can download stock rom for my phone.
Click to expand...
Click to collapse
If your on xda with your browser, it's the paperclip icon to attach files. If you are using a 3rd party app that wraps xda into it then I can't help you there. As for going back to stock, Motorola made things a little critical when they released Nougat. Depending on how far you were on keeping the device up to date through stock, flashing the available stock images (which aren't signed) could brick the device if you aren't careful. There use to be an account on androidfilehost that uploaded current stock packages but it seems they're all gone now. If you remember the build number of the device before you rooted, that will help in picking the right stock files. I've taken a break in keeping my device rooted so I haven't kept track of the resources used to help go back to stock but they're in the MZP guide threads.
EDIT: a word of caution when reverting to stock:
-Don't use flash tools that don't let you see/edit the fastboot commands
-Do not use commands that touch modem/radio or gpt partitions
Found an upload of the latest build release keep it around when you figure out what you need to flash. It's best to clear system, data, and cache before flashing. Also have a rom (and twrp) at hand to adb sideload in case stock doesn't boot.
https://androidfilehost.com/?a=show&w=files&flid=215703
This Android version 7.1.1
Security patch: Sept 2017
Build number: NPN26.118-22-2

Thanks alot... ?

Use Fingerprint to Lock and Unlock your device

This Mod uses your fingerprint to lock your device. Longer presses will take you to the reboot menu.
:good: Download in my rom section or this quicklink.
https://forum.xda-developers.com/devdb/project/dl/?id=29427

How can i remove it from my phone?

nemanco said:
How can i remove it from my phone?
Click to expand...
Click to collapse
Unfortunately I had to reinstall my rom. :x
The problem was that the FP sensor is way too sensitive after installing the mod.
I couldn't hold the phone in the hand without instantly triggering the FP sensor.
Foremost the FP sensor doesn't react not only to saved FP's.
You should definitely look into that, Jerome.
Or at least offer a patch to uninstall the mod.
Besides that it's a very good idea, but it needs fine tuning.

Could you please give me the uninstalation for the mode the fingerprint sensor is to sensitive, and i realy dont want to reflash the stock rom again ?

nemanco said:
Could you please give me the uninstalation for the mode the fingerprint sensor is to sensitive, and i realy dont want to reflash the stock rom again ?
Click to expand...
Click to collapse
Put without unzip inside this zip only the META-INF folder from the zip that you flashed meanwhile OP can solve this, hope this works
View attachment restore-fingerprint.zip

SubwayChamp said:
Put without unzip inside this zip only the META-INF folder from the zip that you flashed meanwhile OP can solve this, hope this works
View attachment 4505426
Click to expand...
Click to collapse
Worked as a charm, thanks! !!!

after flashing the zip file all working and really good but the volume rocker and power doesent work, I downloaded the removefingerprint.zip but also doesent work when I flashed the file.
My currently Rom is AOSP Extended 7.1
thanks.

mavid26 said:
after flashing the zip file all working and really good but the volume rocker and power doesent work, I downloaded the removefingerprint.zip but also doesent work when I flashed the file.
My currently Rom is AOSP Extended 7.1
thanks.
Click to expand...
Click to collapse
Almost any rom would need a proper remover/replacer zip, last was for miui roms so try this, read the post #5 and apply to this zip before flashing it. I hope it works
View attachment restore-fingerprint-aex71.zip

I installed the lineage os 15.1 on my xiaomi redmi 5 plus, but the fingerprint settings are not there and I do not know how to put them.
Are there any mods? How can I do?
thank you

Thanks for your amazing mod it's working prefect on my miui but now i installed pixel experience rom and the mod not work. Please update it for costume roms.

Tested on MIUI 10 RN5 Global (AI) and it broke both power button and fingerprint button.
EDIT: the fix provided did not work for me. Copied the folder as requested to the zip but even after flash the buttons are still broken (had to flash the ROM, just a system restore could not fix it too.)

it ****ed up my Redmi 5 Plus phone i don't want to reinstall my rom please publish uninstall for oreo or Pie patch .

sfnemis said:
it ****ed up my Redmi 5 Plus phone i don't want to reinstall my rom please publish uninstall for oreo or Pie patch .
Click to expand...
Click to collapse
Which version firmware are you using?

lock unlock fingerpriner
does it exist for redmi note 7?

Way to fix...
Perhaps a bit late, but...
For those who lost power and volume rockers the problems is file permissions.
You have to change file permission of 3 files on /system/usr/keylayout:
- Generic.kl
- uinput-fpc.kl
- uinput-goodix.kl
and set them to "-rw-r-r--"
also set them to be owned by root:root
While booting these files must be read for non root process. On some installs the last "r--" (other user privileges) are not set correctly.
Also, you must know that each keymapping files are for each brand and model. Where key 353 if for virtual fingerprint on RN5, the same "virtual fingerprint key" is number 96 on Mi Mix2, so if you flahed these files por RN5 on other model, you should find these files from a ROM (TWRP/nandroid backup from your device previous to the flash), or other rooted device and copy them to your own.
With these instructions you could prevent flashing entire rom

king.com said:
Perhaps a bit late, but...
For those who lost power and volume rockers the problems is file permissions.
You have to change file permission of 3 files on /system/usr/keylayout:
- Generic.kl
- uinput-fpc.kl
- uinput-goodix.kl
and set them to "-rw-r-r--"
also set them to be owned by root:root
While booting these files must be read for non root process. On some installs the last "r--" (other user privileges) are not set correctly.
Also, you must know that each keymapping files are for each brand and model. Where key 353 if for virtual fingerprint on RN5, the same "virtual fingerprint key" is number 96 on Mi Mix2, so if you flahed these files por RN5 on other model, you should find these files from a ROM (TWRP/nandroid backup from your device previous to the flash), or other rooted device and copy them to your own.
With these instructions you could prevent flashing entire rom
Click to expand...
Click to collapse
Hi, Is there a code you know for the mi A1 (tissot) is needed to lock the screen.
or there may be a hint on where to find it, thanks :victory:

[UNOFFICIAL][ROM] LineageOS 14.1 for Galaxy Tab E [SM-T561/SM-T560]

Code:
[B][U]Disclaimer:[/U][/B]
I am not responsible for any damage to you your device. Everything you do, you do on your own risk!
Last year I got a Galaxy Tab E (SM-T560) from Samsung for free as gift to my new mobile phone.
Unfortunately the ROMs for SM-T560NU tabs are not working on that device, but I found a working ROM of LineageOS 14.1 (Android Nougat 7.1.2) on the following page:
How to install Android Nougat on the Galaxy Tab E (SM-T561)
Click to expand...
Click to collapse
Original source (Russian language)
Click to expand...
Click to collapse
LineageOS 14.1 (formerly known as CyanogenMod) ROM is based on the Android stock ROM released by Google, which the LineageOS team modifies.
Credits go to the LineageOS team for making this ROM available to many devices and to independent developers like Ma3a_XaTa for porting this ROM to the Tab E SM-T561.
Click to expand...
Click to collapse
Just installed it to my tab and it seems working well!
I used the instructions from a comment at the bottom of the page:
Downloads:
ROM: LineageOS 14.1
Gapps: The Open GApps Project
Boot Image: boot.img
SoftKeyFix: KeyFix
Recovery: TWRP Recovery for Tab E
Root: SuperSU
Click to expand...
Click to collapse
Prerequisites:
1. Make sure you have TWRP 3 installed (HowTo)
2. Move the downloaded files to your Micro SD Card (>4GB recommended)
3. >50% battery charge
4. Some patience.
Click to expand...
Click to collapse
Installation:
1. Boot to TWRP 3 (Power + Home + Volume Up) and Swipe to allow modifications
Note: Make sure to Backup EFS and Modem to Micro SD Card in TWRP.
2. Wipe > Advanced Wipe > (Select Dalvik Cache, System, Data, Internal Storage, Cache ONLY) > Swipe to WIPE
3. Install > Select Storage > Micro SD Card > Select lineage-14.1-20180419-UNOFFICIAL-gtel3g.zip
4. Add More Zips > open_gapps-arm-7.1-pico-2018xxxx.zip
5. Add More Zips > keys.zip
6. Swipe to confirm flash and wait for 5-10 mins
7. After the Flash process DO NOT restart system.
8. Go back to Install > Install Image > boot.img > Select Boot Partition > Swipe to confirm flash
9. After the boot.img has been flashed DO NOT restart system IF you want Root.
10. Go back to Install > Install Zip > SR3-SuperSU-v2.82-SR3-20170813133244.zip > Swipe to confirm flash
11. Now Restart System.
12. Wait 10-15 mins, it will take some time.
13. Enjoy Lineage OS!
Click to expand...
Click to collapse
Known bugs:
- Charging while the device is off works, but does not show battery charge indicator animation.
Click to expand...
Click to collapse
Good luck and enjoy!
Code:
[B][U]Miscellaneous:[/U][/B]
[URL="https://www.hardreset.info/devices/samsung/samsung-t560-galaxy-tab-e-96-wifi/download-mode/"]HowTo bring the Tab to DownloadMode[/URL]

Hints & Tips:
1. To improve the speed of the tablet, turn of animations inside Developer Options.
2. You can also install an app freezer called "Icebox" to temporarily disable RAM hungry apps like Facebook, Chrome etc.
3. To ensure longer battery life, disable “double tap to wake” hidden somewhere in the settings (use the app called "Kernel Adiutor" from the Playstore).
4. If you don’t plan to put a SIM on this thing or if you are having a SM-T560 only, put it in airplane mode and then turn on your WiFI when needed. Turn of GPS/location or even sync when not necessary.
5. Disable "Adaptive Display" in the settings. It seems to make the tablet slower.
6. Improve the battery life of the tab by using an app called “L Speed“ (available in Playstore).

Hello, great post. I used this ROM before, but after some time it just stops working. You can't boot it anymore.
How long do you use it already?

mimuta said:
Hello, great post. I used this ROM before, but after some time it just stops working. You can't boot it anymore.
How long do you use it already?
Click to expand...
Click to collapse
I'm using it now for approx. 3 weekswithout any problems. How long did you use it?
BR, See

SeeDoubleYous said:
I'm using it now for approx. 3 weekswithout any problems. How long did you use it?
BR, See
Click to expand...
Click to collapse
I was wondering what version are you running? Everytime j download one it fails to flash through TWRP? You got a link to a download ??

V3rdeV1ntage said:
I was wondering what version are you running? Everytime j download one it fails to flash through TWRP? You got a link to a download ??
Click to expand...
Click to collapse
What version of TWRP are you using & what error do you get?

Have someone passed safetynet check ? Can you help me with pass?

The ROM is running ok so far on my T560, but I noticed some problems:
* If the tablet runs out of battery with Wifi activated, charging and booting it up causes a boot loop until Wifi is turned off. Something like that... it sometimes gives you the time to open the settings and turn off Wifi before it reboots.
* The Tablet's battery is drained by "Mobile Standby" in approx. two days, regardless of power save, battery saver and/or flight mode. When the Tab is idle all the time, the battery graph runs down in a straight diagonal line until the battery is empty, approx. 2 % per hour. Did not find a way to disable Mobile Standby on my T560 which doesn't even have a modem (maybe that's the problem).
* The system is a bit laggy given that it's a quad core, but turning off Animations helped. I suspect hardware acceleration does not work.
I'd switch to a better rom if I find one. But thanks anyways for the information and work! Better than nothing, I guess

Problems of ignition and charge of battery
Hello friends, I need a help I have a Samsung Tab E 9.6 = SM.T561, I installed Roon Custom Lineage 14.1 with TWRP, but the Tablet was downloaded and I can not charge it or turn it on, I searched everywhere and nobody gives me answers . I appreciate the help given. Thank you

Hi, I hope someone who has tried this rom can give me some feedback on it. My main concern its if this is stable and faster than ron. Any idea?

s5minimalist said:
The ROM is running ok so far on my T560, but I noticed some problems:
* If the tablet runs out of battery with Wifi activated, charging and booting it up causes a boot loop until Wifi is turned off. Something like that... it sometimes gives you the time to open the settings and turn off Wifi before it reboots.
* The Tablet's battery is drained by "Mobile Standby" in approx. two days, regardless of power save, battery saver and/or flight mode. When the Tab is idle all the time, the battery graph runs down in a straight diagonal line until the battery is empty, approx. 2 % per hour. Did not find a way to disable Mobile Standby on my T560 which doesn't even have a modem (maybe that's the problem).
* The system is a bit laggy given that it's a quad core, but turning off Animations helped. I suspect hardware acceleration does not work.
I'd switch to a better rom if I find one. But thanks anyways for the information and work! Better than nothing, I guess
Click to expand...
Click to collapse
I have my T560 all the time in airplane mode with Wifi on. Battery drain is no problem at all.
It is also written in my second post:
HTML:
https://forum.xda-developers.com/showpost.php?p=78977223&postcount=2
aribetty said:
Hello friends, I need a help I have a Samsung Tab E 9.6 = SM.T561, I installed Roon Custom Lineage 14.1 with TWRP, but the Tablet was downloaded and I can not charge it or turn it on, I searched everywhere and nobody gives me answers . I appreciate the help given. Thank you
Click to expand...
Click to collapse
I had a similar problem in the beginning. Seemed as the tab was in a bootlooporsomething similar with black screen.
The only solution I found was to wait some days until the battery was empty, charge the tab and directly started to download/recovery mode and flash it again.
Now it is working fine with this ROM.
Rittachi said:
Hi, I hope someone who has tried this rom can give me some feedback on it. My main concern its if this is stable and faster than ron. Any idea?
Click to expand...
Click to collapse
I am using it now for ~2.5 months and I am quite happy with it.
It is much better then the stock ROM.

Hi @SeeDoubleYous and guys. I was reading the Forum and decided to share with you my experience with this ROM. Well, I'm owner of a SM-T560 (in US and Canada this model is T560NU I don't know why it's different just in these two countries ). Anyway....
I made all the steps described on the step-by-step Instructions. (TWRP Recovery via ODIN, Root, ROM, GAPPS, etc etc etc).
I'll be honest with you. My t560 turned in a piece of sh... Very Slow, Apps Stucking all the time, sometimes bootlooping too... i used the Tab for almost 3 weeks. After that I decided to reset the device and I did all steps again using the same ROM (I reinstalled the TWRP RECOV via ODIN, proceeded a Factory + Internal Memory Wipe, Installed the LINEAGE 14.1 OS, etc, etc, etc) But this time I choose the "Micro" GAPPS option instead "PICO". Installed Root SU, etc, etc exactly as the directions wrote in the top page.
For my surprise, It's perfect Now!!!! ROM is great.... No problems of RAM, Bootlooping, Stucking, APP crashing... Absolutelly Nothing!
I don't know why, but it seems that the secret is install for first time and use for some weeks even its is not working fine. And After that, proceed All the step-by-step again from the very beggining. (Reinstall TWRP, ROM, GAPPS, Keys, "Boot Image" and ROOT SU). It will work fine on SM-T560 just from the second Install on.....
All Best guys

I need help. My screen is stuck on boot again
Am I bricked?

Hi guys, I've got a T560 tablet with the official ROM and I'm researching to upgrade it's software.
Currently I'm away off-shore for work but as soon as I get home I'll try this ROM.
I've been a fan of CyanogenMod since the early days and I'm eager to try it so I can bring some new life into my old tablet.
Since this ROM is for the SIM card variant T561 I was searching for a way to disable the Radio altogether and I found this:
https://android.stackexchange.com/q...le-radio-signal-in-a-phone-without-a-sim-card
Basically it disables the RIL with a simple Terminal Command:
Code:
su -c "setprop persist.radio.noril 1"
Can someone try this and see if its working properly? (OFC after a Back-up is done) Its persistent through reboots so you don't need to use Airplane Mode anymore and maybe it will help with the battery draining problem.
Also one question for the guys who are currently using this ROM:
Is Magisk working? After everything is set-up can we uninstall SuperSU and install Magisk for root?
Thank you,
Have a nice day!

SpawNyK said:
Code:
su -c "setprop persist.radio.noril 1"
Click to expand...
Click to collapse
I've tried the command and it worked, no reboots even if the airplane mode is off and no problem so far.
I don't know if the battery life is better now because I've just done it.
For the other question, I haven't tried because I like SuperSu, but I think there's no problem.

gucio1976 said:
And what do you think about it.
https://mega.nz/#!49QXRIAb!7FtqWknBNzIe5-Ak-Jgmq7N71JB4TcGEi-MjuQCuvhw
Click to expand...
Click to collapse
Can you please provide a guide for flashing this?
Like which GApps version should I use, etc...

I get in red, does something affect ROM? e: unknown command [log]

Hey,
does this rom works with SM-T562??? (3G)

Is there any updated ROMs like LOS 15 or 16 for SM-T561 (gtel3g), I tried to Port LOS 16 but I get error 7 while flashing in TWRP(V3).

gucio1976 said:
And what do you think about it.
https://mega.nz/#!49QXRIAb!7FtqWknBNzIe5-Ak-Jgmq7N71JB4TcGEi-MjuQCuvhw
Click to expand...
Click to collapse
gucio1976 said:
I found it here .
https://www.youtube.com/watch?v=-4h_3qDRiv8
Click to expand...
Click to collapse
Why should you use the old version, if this thread offers a newer one?
gucio1976 said:
---------- Post added at 11:33 ---------- Previous post was at 11:13 ----------
Something else. Maybe it will be useful to someone.
https://www.youtube.com/watch?v=7JpUomQs2ok
Click to expand...
Click to collapse
I think that's the same version as offered here...
shreejalm said:
Is there any updated ROMs like LOS 15 or 16 for SM-T561 (gtel3g), I tried to Port LOS 16 but I get error 7 while flashing in TWRP(V3).
Click to expand...
Click to collapse
I did not find any new version. The ones available are only working with the SM-T560NU....
Sorry!

How I can flash a GSI ROM for Redmi Note 8 Pro?

Hello everyone, Im trying to understand how to flash a GSI img ROM (I want to try AOSP stock, or Havoc OS) but, I saw some posts and looks like is a bit hard to do.
I had TWRP installed (unofficial begonia) and magisk installed.
some informations I found: this device is just A slot supported
What exactly I need?
Orange Fox recovery?
Before flash need to disable something in recovery?
A arm64 slot IMG?
And gapps?
What are the steps?
Im waiting your answer

So far with my personal experience trying to flash Lineage 17 GSI on my RN8Pro and have had no luck. Lost baseband and both imei #'s in the process too (still trying to figure out how to restore).

Finally was lucky!
Flash LR Team TWRP:
https://mega.nz/#!B75xWQQQ!8DQdy09luHihxCziRX7ywUWkAwmAahjnWOQDgHxcTPA
Enable debugging and make sure computer has permission to use
On command promp adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot (immediately disconnect phone and hold volume up)
In twrp go to advanced and Select "Close AVB2.0" swipe to confirm
Go back to twrp home -> Wipe -> Format
Flash gsi
And presto!
I just flashed Lineage 17 GSI as of now I wouldn't recommend it. Fixing to flash ASOP 10 GSI from phhusson see if it is any better!
Also as a favor since I lost baseband and imei for my phone could you please create a backup through twrp of your nvram and nvdata and PM it to me?
If you need any help just pm me!

JuanM2020 said:
Finally was lucky!
Flash LR Team TWRP:
https://mega.nz/#!B75xWQQQ!8DQdy09luHihxCziRX7ywUWkAwmAahjnWOQDgHxcTPA
Enable debugging and make sure computer has permission to use
On command promp adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot (immediately disconnect phone and hold volume up)
In twrp go to advanced and Select "Close AVB2.0" swipe to confirm
Go back to twrp home -> Wipe -> Format
Flash gsi
And presto!
I just flashed Lineage 17 GSI as of now I wouldn't recommend it. Fixing to flash ASOP 10 GSI from phhusson see if it is any better!
Also as a favor since I lost baseband and imei for my phone could you please create a backup through twrp of your nvram and nvdata and PM it to me?
If you need any help just pm me!
Click to expand...
Click to collapse
What problems were there with the los 17 gsi?

Please share what's working on the GSI ROM and what's not. Thank you.

polfrank said:
What problems were there with the los 17 gsi?
Click to expand...
Click to collapse
Off the bat, Bluetooth did not work it just kept giving a Bluetooth has stopped message. Didn't have face unlock. Screen would suddenly flash as if display were damaged and would suddenly freeze when opening stock apps. And a few other things I don't remember as I already flash off of it.

Helhound0 said:
Please share what's working on the GSI ROM and what's not. Thank you.
Click to expand...
Click to collapse
I've flashed Havoc OS 2.9 GSI and after resizing and disabling HW overlays the ROM works near perfectly albeit some camera issues.

JuanM2020 said:
Finally was lucky!
Flash LR Team TWRP:
https://mega.nz/#!B75xWQQQ!8DQdy09luHihxCziRX7ywUWkAwmAahjnWOQDgHxcTPA
Enable debugging and make sure computer has permission to use
On command promp adb reboot bootloader
fastboot flash recovery twrp.img
fastboot reboot (immediately disconnect phone and hold volume up)
In twrp go to advanced and Select "Close AVB2.0" swipe to confirm
Go back to twrp home -> Wipe -> Format
Flash gsi
And presto!
I just flashed Lineage 17 GSI as of now I wouldn't recommend it. Fixing to flash ASOP 10 GSI from phhusson see if it is any better!
Also as a favor since I lost baseband and imei for my phone could you please create a backup through twrp of your nvram and nvdata and PM it to me?
If you need any help just pm me!
Click to expand...
Click to collapse
Of course and thanks dude. In a few hours i will attach the files.

yayimathrowaway said:
I've flashed Havoc OS 2.9 GSI and after resizing and disabling HW overlays the ROM works near perfectly albeit some camera issues.
Click to expand...
Click to collapse
Newbie here. Please let me know what is it for and how to "resizing and disabling HW overlays"

yayimathrowaway said:
I've flashed Havoc OS 2.9 GSI and after resizing and disabling HW overlays the ROM works near perfectly albeit some camera issues.
Click to expand...
Click to collapse
That sounds good. Thanks for sharing. Did you use GSI since you flashed or did you restore MIUI?

Sorry for my ignorance, but what is a GSI ROM?

montechristos1 said:
Sorry for my ignorance, but what is a GSI ROM?
Click to expand...
Click to collapse
Generic System Image. Basically a single ROM image that should technically work in any device running Android 8.1 or newer. It contains the generic AOSP (Pure android) source.

Helhound0 said:
Generic System Image. Basically a single ROM image that should technically work in any device running Android 8.1 or newer. It contains the generic AOSP (Pure android) source.
Click to expand...
Click to collapse
Thanks.
So people were able to flash LOS GSI on their Redmi Note PRO?
No specific thread for this?
(I am one of the people that are waiting for one of the custom open-source ROMs to replace the (ihmo) horrible MUI)

MarkLev said:
Newbie here. Please let me know what is it for and how to "resizing and disabling HW overlays"
Click to expand...
Click to collapse
Disabling HW Overlays means that your GPU is the only thing that will handle all of the graphics on your phone. If this is not on in some GSI ROMs the screen will flicker when it's about to go to sleep and at other random times. It can be accessed in Developer options.
Additionally, as this is a GSI made to work on many different phones, the proportions on the screen are off when you first install it. On Havoc, all of the resizing options are in Havoc Settings. In other ROMs without customization options, there are ADB commands that can resize your ROM. Specifically, the problems I initially experienced were involving the status bar icons and clock only partially being on the screen.
---------- Post added at 07:57 AM ---------- Previous post was at 07:46 AM ----------
Helhound0 said:
That sounds good. Thanks for sharing. Did you use GSI since you flashed or did you restore MIUI?
Click to expand...
Click to collapse
I am actually using the GSI right now. I didn't restore MIUI because I just did not like it. I think I'll stay on this GSI. Again, after some modifications in Settings, the ROM I'm using works near perfectly.
The cameras, of course, are kind of messed up though. No matter what camera app I use I cannot access the 64MP camera and anything other than the camera app that came with the GSI (which is pretty bad) randomly flickers the screen while I'm taking a picture or recording a video, even after disabling HW Overlays in Developer Options. Maybe could be fixed by flashing a third party camera app as a system app.
Other than that, no problems whatsoever.
---------- Post added at 08:04 AM ---------- Previous post was at 07:57 AM ----------
KonahZave said:
Hello everyone, Im trying to understand how to flash a GSI img ROM (I want to try AOSP stock, or Havoc OS) but, I saw some posts and looks like is a bit hard to do.
I had TWRP installed (unofficial begonia) and magisk installed.
some informations I found: this device is just A slot supported
What exactly I need?
Orange Fox recovery?
Before flash need to disable something in recovery?
A arm64 slot IMG?
And gapps?
What are the steps?
Im waiting your answer
Click to expand...
Click to collapse
If you still need some help, I have a full guide on how to flash here

yayimathrowaway said:
I am actually using the GSI right now. I didn't restore MIUI because I just did not like it. I think I'll stay on this GSI. Again, after some modifications in Settings, the ROM I'm using works near perfectly.
The cameras, of course, are kind of messed up though. No matter what camera app I use I cannot access the 64MP camera and anything other than the camera app that came with the GSI (which is pretty bad) randomly flickers the screen while I'm taking a picture or recording a video, even after disabling HW Overlays in Developer Options. Maybe could be fixed by flashing a third party camera app as a system app.
Other than that, no problems whatsoever.
Click to expand...
Click to collapse
I don't really mind the cameras not working at a 100% tbh since i don't use them that much. However did you try GCam on GSI or any other API2 camera app?

Helhound0 said:
I don't really mind the cameras not working at a 100% tbh since i don't use them that much. However did you try GCam on GSI or any other API2 camera app?
Click to expand...
Click to collapse
Yeah, but the screen flashes randomly on them.
CameraMX works great with the cameras that it does support. CameraF5-V crashes randomly. GCam for RN8P can only take photos, and only supports 2 cameras. I think that some of these issues would be fixed if I flashed then as system apps, because the stock camera app works fine, albeit the fact that it's just not a very good camera app.

[ROM][UNOFFICIAL][W.I.P]LineageOS for Redmi Note 9S/9Pro[curtana/joyeuse]

tldr; use the LeddaZ build
Downloads:
ROM
Lineage Recovery
Hello XDA,
I'm posting a build using the unified curtana build code that's on github. I have a joyeuse (9 Pro) so I can't really test it on the 9S (curtana). I've been testing it out for a couple of days and haven't had any bugs other than status bar centered items.
Bugs / not working / To do:
Wireguard support Added 18-Sept
Play Store certification (Workaround using MagiskHide Props Config)
64 MP camera module seems to work only with the ANX Camera ver 185(not included). You must manually add all permissions.
Status bar text around the front camera
Code:
Source Code: https://github.com/LineageOS
Device: https://github.com/xiaomi-sm6250-devs/android_device_xiaomi_curtana-unified
Kernel: https://github.com/xiaomi-sm6250-devs/android_kernel_xiaomi_sm6250
Vendor: https://gitlab.com/m0sin/proprietary_vendor_xiaomi_curtana

Play Store certification: Have you tried with the latest gapps yet?

How to install? Anything I need to look at?

dungphp said:
Play Store certification: Have you tried with the latest gapps yet?
Click to expand...
Click to collapse
I have, it might be Magisk or I'm not hiding it properly.
Edit: I used the Magisk HideProps module and everything works fine now. I think the naming, curtana vs joyeuse and version number were causing the issue.

glurak888 said:
How to install? Anything I need to look at?
Click to expand...
Click to collapse
If you are coming from stock, I installed the Lineage recovery, installed the ROM. After it rebooted, I went back to install OpenGapps and Magisk.
I tried going from stock using Pbrp but it failed for me. After Lineage was installed, PBRP worked fine.

I have just installed it, anything I should know?

Installed successful on
Note pro 9 a Joyeuse (global) with 64mp cam , nfc and Lte aka a M2003J6B2G
Only recovery from lineage worked for me ... it also enables fastbootd !!
Rooting with magiskmanager wasnt possible via patching boot.img but flashing Magisk-v20.4.zip via recovery worked .
nfc works too
fastcharge seems so work fine ...
lte seems to work too
will try anx cam and 64 mpx tomorrow ... //edit - ANXCameraUnity_185.SaltyIntelligentPlainsqueaker and 48MPFixQ_170.SophisticatedFatBetafish make it work too ....
thx

I installed the ANXCameraUnity_185.SaltyIntelligentPlainsqueaker.zip and the camera app crash all time. Should I install and the 48MPFixQ_170.SophisticatedFatBetafish.zip?
Thank you for this nice rom, keep walking.

[email protected] said:
I installed the ANXCameraUnity_185.SaltyIntelligentPlainsqueaker.zip and the camera app crash all time. Should I install and the 48MPFixQ_170.SophisticatedFatBetafish.zip?
Thank you for this nice rom, keep walking.
Click to expand...
Click to collapse
Yes, install the 48 MP Fix to add the 48 MP camera. It's crashing because you need to manually fix the permissions on the app. After you allow everything it'll crash once then work fine.

Minor update:
September security patch
Added wireguard kernel support 1.0.20200908

moffa~ said:
If you are coming from stock, I installed the Lineage recovery, installed the ROM. After it rebooted, I went back to install OpenGapps and Magisk.
I tried going from stock using Pbrp but it failed for me. After Lineage was installed, PBRP worked fine.
Click to expand...
Click to collapse
so basically we flash on joyeuse a curtana recovery in order to flash a curtana rom and then we flash back the joyeuse recovery right?

didicola said:
so basically we flash on joyeuse a curtana recovery in order to flash a curtana rom and then we flash back the joyeuse recovery right?
Click to expand...
Click to collapse
Not sure I understand what you are saying. The build is joyeuse/curtana unified. I don't like not being able to flash zips without sideloading so I'm using the PBRP recovery. For the initial flash I used my PC and the Lineage Recovery.

Are the gapps included or do we need to flash them?

kalehrl said:
Are the gapps included or do we need to flash them?
Click to expand...
Click to collapse
Not included. Must be flashed.

Excellent rom, I have used it since its publication, and so far no problem. The performance of the battery seems to me outstanding, and to this day, it is the only one in which an indispensable application for me (Sony Music) works without problem. I hope the excellent work continues, and it even became an official version. Thanks!

I use redmi note 9s, can i flash this rom?

vanmaitrangchu said:
I use redmi note 9s, can i flash this rom?
Click to expand...
Click to collapse
Theoretically yes. Please share your experience if you try it out.

moffa~ said:
Theoretically yes. Please share your experience if you try it out.
Click to expand...
Click to collapse
When i used mi note 3, lineage is bettest rom for me. But it is officical. with mi note 9s (4/64) i got few bug, i try test it again.
first day i got:
when flash, i have some problem, but it easy, forget it. after that i reboot system, 2 minute its done. reboot to recovery to flash gapp (nano), reboot, but i can sync adress from google .
Try again, i wipe all data (rom in sd card), flash again. reboot device, wait rom instal, reboot recovery, flash gapp again, reboot, it ok :v i dont know why!
some thing i dont like with rom:
- dial not support dual sim, mean: icon sim1 sim2 when use dial pad. i use 2 sim.
- swicht speaker too much make phone restart (im shiper, i usally switch), it make me crazy.
- no 1 hand mod, i ussally use it with 1 hand, to big to use.
And else i like this rom, from mi note 3.
Sorry, my english very bad! I hope offical soon, thanks so much!

vanmaitrangchu said:
When i used mi note 3, lineage is bettest rom for me. But it is officical. with mi note 9s (4/64) i got few bug, i try test it again.
first day i got:
when flash, i have some problem, but it easy, forget it. after that i reboot system, 2 minute its done. reboot to recovery to flash gapp (nano), reboot, but i can sync adress from google .
Try again, i wipe all data (rom in sd card), flash again. reboot device, wait rom instal, reboot recovery, flash gapp again, reboot, it ok :v i dont know why!
some thing i dont like with rom:
- dial not support dual sim, mean: icon sim1 sim2 when use dial pad. i use 2 sim.
- swicht speaker too much make phone restart (im shiper, i usally switch), it make me crazy.
- no 1 hand mod, i ussally use it with 1 hand, to big to use.
And else i like this rom, from mi note 3.
Sorry, my english very bad! I hope offical soon, thanks so much!
Click to expand...
Click to collapse
Thanks for testing it out.
Unfortunately, I don't have a second sim card to test it with.
I have no problem using the speaker phone at all. Could you grab the logs, maybe I can look into it.
It looks like one-hand mode was removed from Lineage. There are gestures for navigation. It works about 90% of the time for me.
------Edit-------
I tested my phone out with a second sim card today and had no issues. Is anyone else having issues with a second sim card?

moffa~ said:
Thanks for testing it out.
Unfortunately, I don't have a second sim card to test it with.
I have no problem using the speaker phone at all. Could you grab the logs, maybe I can look into it.
It looks like one-hand mode was removed from Lineage. There are gestures for navigation. It works about 90% of the time for me.
------Edit-------
I tested my phone out with a second sim card today and had no issues. Is anyone else having issues with a second sim card?
Click to expand...
Click to collapse
The problem occurs when turning on the speakerphone while calling. End of the call without turning off the speakerphone, the next call will easily lose sound. Ratio 1/5. Trying to turn on and off the speakerphone is very easy to reset the device.
Regarding the 2 sim issue: I mean there is no separate button for the 2 sims in the dial pad. Like the dial pad of the EU version, very convenient.
I need one hand mod, too hight with my hand. like picture.