Enabling addional bands - Moto G6 Play Questions & Answers

Hi, i have moto g 6 play (aljeter) which doesn't have enabled 800MHz frequency for LTE. But operator in my country using this one and i wanna enable this. I tried this guide: https://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059 but without succes. I figured out instead of changing USB settings i must reboot into bootloader and select BP Tools, but when i did that phone starts to boot, device menager showing 3 unknow devices for a moment then phone boots normally. How can i enable that band? BTW i am running custom ROM (HavocOS v2.9 GSI with latest magisk)

Related

Add GSM and LTE bands in Brazil

I've spent 3 days trying to enable GSM and LTE bands in my Swift following this guide from here. But when I try to use the QPST, the software does not recognize my device.
Does anyone knows the secret code to enter in the USB Settings? I've tried a lot of them but without success.
My steps were:
Unlock the OEM - check
Install CyanogemMOD 13 (6.0.1. Marshmallow) - check
Enable Developer Options and enable debugging and Root Access (I couldnt install SuperSU coz I got bootloop twice) - check
Access to USB Settings to change from AP to CP - uncheck
Does anybody knows how to proceed?
I'm from Brazil and I really need to add new bands to get a better signal reception for GSM and the right band for LTE (700Mhz).
Anyone?
I just need the secret code to enable the usb settings.
The problem was my carrier and not the phone.
I've changed the carrier and boom... 4G working nicely.

Razr 5g - 5g netword mode setting ?

Hello,
I just received my Razr 5g and I have a question about 5g setting. I cannot choose 5G in the network mode setting, see attached picture, only 2G, 3G and 4G, is it normal ?? someone have 5G option available ?
Best regards
US Unlocked
Ok thank you !
NIco
Just got my Razr 5G
So I popped in my nano_sim card and booted up the phone. As it went through most of it's installation and download files, I went into the settings window and I have a similar window in that it has the option that says just "prefer 5G network" all on it's own.
By the way, I am in Canada on the Rogers network living in a 5G covered zone.
Cheers,
Vodafone UK with the expected network options of 5,4,3,2G / 4,3,2G / 3,2G / 3G / 2G
You can read my post here:
https://forum.xda-developers.com/t/5g-setting-not-appearing-on-5g-network.4229409/post-84931605
Lenovo/Motorola Rescue and Smart Assistant (RSA) saved my Razer 5G and upgraded it to Android 11 with added 5G option in network settings. I had only up to "prefer 4G" option under Android 10 latest update with february 2021 security patch. And it wouldn't see any Android 11 OTA update.
If you have the same issue, hit the link below and download the "Rescue and Smart Assistant" listed in the Help topics (and the USB drivers if not already installed). Then start the program, create and/or log in with your Lenovo account. You can now connect your Razr to your PC, with your USB cable and USB Debugging enabled in developers options (and probably also OEM unlock). Hit many times in the row the "Build number" under "About your phone" in the settings to activate developers options.
It should then ask you on the phone if you want to connect to this Windows PC bla-bla, click on always and accept.
You should now see Rescue and Smart Assistant connecting to your phone and asking you to grant some accesses on your phone. When you did so, the program will show your Razer's informations under "My Device" or "Rescue".
Under "Rescue", you should be offered the option to rescue it by downloading the corresponding latest firmware. My device wouldn't start beyond fastboot mode or system error message, but it still got recognized in fastboot mode and I could save it this way.
https://support.motorola.com/us/en/products/cell-phones/motorola-razr-family/razr
I have a German Razr 5G model XT-2071-4. And I can now confirm it happilly connects to 5G network where it's available. Only problem is that the internal antenna seems to have a weak reception quality, at least in 5G.
Maybe this information was already posted elsewhere in the forums, but I think it's important to have this information instead of staying locked under Android 10.

Installation on Moto G8 Power, Sofiar RETEU, XT2041-3

I just bought this phone and installed LineageOS 17.1.
Dual SIM / 64GB / 4GB version
I pretty much followed these instructions: https://asineth.ml/post/android-rav/
One issue I ran into was that the "OEM unlock" option in the UI was disabled (greyed out) because you need to be online for that. After connecting to Wifi i was able to continue.
Another issue: I couldnt execute `fastboot reboot fastboot` because my adb/fastboot binaries were to old. I followed https://wiki.lineageos.org/adb_fastboot_guide.html to get the latest versions.
I do experience some small bugs that I also had with 17.1. on my previous phone (Moto G7 Plus)
- cellular data stops working for some reason, turning mobile data off and on again fixes the problem until it occurs again.
- sometimes i cannot click "Read" on text notifications in the notification area.
- the signal cellular bar appears with a little x in the bottom right corner and I dont know what the x is supposed to indicate.
feel free to ask for help if you have the same phone and get stuck in the process.
cheers
sadly more bugs
- if I turn off wifi hotspot the phone freezes and reboots
- sometimes the phone swallows text messages that are sent to me

How To Guide working method to enable Volte and Vowifi using PDC (no root)

1. install Logkit v1.0.apk, and Engineering Mode v1.01.0.171117173719.apk
2. Open Phone and type *#800# select Engineering Mode
3. Oneplus Logkit ---> Function Switch ---> enable VoLTE, VoWifi и VT
4. Reboot
5. Open settings and enable VOLTE and voWi-fi
6. Open Phone and type *#801# select Engineering Mode
7. Switch to full port switch
8. Open settings and enable debugging by usb mode
9. adb reboot ftm
10. adb shell
11. setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
12. Open PDC and select profile ( sub0 and sub1 then click activate for VoLTE PTCRB for example)
13. Close PDC
14. adb reboot
Thanks that worked perfectly. Do you know how to enable 5G? it doesn't show up in setting as an option
bilaloga said:
Thanks that worked perfectly. Do you know how to enable 5G? it doesn't show up in setting as an option
Click to expand...
Click to collapse
*#*#4636#*#* then Phone Information -> Set preferred network type. Choose :
NR/LTE/TDSCDMA/CDMA/EvDo/GSM/WCDMA
Or
NR/LTE/TDSCDMA/GSM/WCDMA
try this first
it works, thank you
Obeid Allah said:
1. install Logkit v1.0.apk, and Engineering Mode v1.01.0.171117173719.apk
2. Open Phone and type *#800# select Engineering Mode
3. Oneplus Logkit ---> Function Switch ---> enable VoLTE, VoWifi и VT
4. Reboot
5. Open settings and enable VOLTE and voWi-fi
6. Open Phone and type *#801# select Engineering Mode
7. Switch to full port switch
8. Open settings and enable debugging by usb mode
9. adb reboot ftm
10. adb shell
11. setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
12. Open PDC and select profile ( sub0 and sub1 then click activate for VoLTE PTCRB for example)
13. Close PDC
14. adb reboot
Click to expand...
Click to collapse
First of all, apologies for asking such basic questions.
I have done something similar to this procedure on a 5 and a 6 previously, but now I am the proud owner of a 9 pro europe variant and would like to enable VOLTE as per your instructions.
where do I find th apk's listed on your instructions list?
What version of PDC is needed, I have one installed from 1 year ago is it the same one?
Awakensoul said:
First of all, apologies for asking such basic questions.
I have done something similar to this procedure on a 5 and a 6 previously, but now I am the proud owner of a 9 pro europe variant and would like to enable VOLTE as per your instructions.
where do I find th apk's listed on your instructions list?
What version of PDC is needed, I have one installed from 1 year ago is it the same one?
Click to expand...
Click to collapse
apks
Awakensoul said:
First of all, apologies for asking such basic questions.
I have done something similar to this procedure on a 5 and a 6 previously, but now I am the proud owner of a 9 pro europe variant and would like to enable VOLTE as per your instructions.
where do I find th apk's listed on your instructions list?
What version of PDC is needed, I have one installed from 1 year ago is it the same one?
Click to expand...
Click to collapse
latest qpst with pdc
Obeid Allah said:
latest qpst with pdc
Click to expand...
Click to collapse
Thank you so much!
I am still not able to complete the full procedure though.
After step 11, the shell accepts the command but when I load pdc the phone does not show up in pdc.
I used the pdv version in the attachment. Any ideas on why this is happening?
Awakensoul said:
Thank you so much!
I am still not able to complete the full procedure though.
After step 11, the shell accepts the command but when I load pdc the phone does not show up in pdc.
I used the pdv version in the attachment. Any ideas on why this is happening?
Click to expand...
Click to collapse
try install latest qualcomm drivers
Reinstalling Qualcomm drivers did the trick with PDC recognizing the phone.
I tried to use two different profiles that used to work on my 5 with VODAFONE PORTUGAL, and as such i tried with India-volte-vodafone and with telefonica_uk_Commercial.
None of them gave me working VOLTE with Vodafone Portugal.
For both of them I activated sub0 and then sub1 and confirmed that the status on PDC shows as active, then rebooted but phone is not showing VOLTE enabled. And under the SIM settings the VOLTE switch is enabled.
Any ideas? Maybe a different profile?
Awakensoul said:
Reinstalling Qualcomm drivers did the trick with PDC recognizing the phone.
I tried to use two different profiles that used to work on my 5 with VODAFONE PORTUGAL, and as such i tried with India-volte-vodafone and with telefonica_uk_Commercial.
None of them gave me working VOLTE with Vodafone Portugal.
For both of them I activated sub0 and then sub1 and confirmed that the status on PDC shows as active, then rebooted but phone is not showing VOLTE enabled. And under the SIM settings the VOLTE switch is enabled.
Any ideas? Maybe a different profile?
Click to expand...
Click to collapse
Flash the following magisk module
Awakensoul said:
Reinstalling Qualcomm drivers did the trick with PDC recognizing the phone.
I tried to use two different profiles that used to work on my 5 with VODAFONE PORTUGAL, and as such i tried with India-volte-vodafone and with telefonica_uk_Commercial.
None of them gave me working VOLTE with Vodafone Portugal.
For both of them I activated sub0 and then sub1 and confirmed that the status on PDC shows as active, then rebooted but phone is not showing VOLTE enabled. And under the SIM settings the VOLTE switch is enabled.
Any ideas? Maybe a different profile?
Click to expand...
Click to collapse
Try using Vodafone UK volte profile and close the pdc application after activation before restarting
Steve0007 said:
Flash the following magisk module
Click to expand...
Click to collapse
This for rooted phones not suitable for his case
I did everything according to this guide and finally got VoLTE. Thank you.
For me 5G is not working, but I have 4G+ all the time, even during phone calls
procent said:
I did everything according to this guide and finally got VoLTE. Thank you.
For me 5G is not working, but I have 4G+ all the time, even during phone calls
Click to expand...
Click to collapse
Obeid Allah said:
*#*#4636#*#* then Phone Information -> Set preferred network type. Choose :
NR/LTE/TDSCDMA/CDMA/EvDo/GSM/WCDMA
Or
NR/LTE/TDSCDMA/GSM/WCDMA
try this first
Click to expand...
Click to collapse
Anyone have a link to the APK?
Obeid Allah said:
apks
Click to expand...
Click to collapse
daltonhrrll said:
Anyone have a link to the APK?
Click to expand...
Click to collapse
You're so helpful lol
This worked perfectly. Thnx

Unlock network bands, enable voLTE and 5G on nonsupported countries

Hi,
Other phone models can use EFS Tool, QPST tool to do all the mentioned tasks.
And some phones to do that requires rooting phone since they dont have Engineering mode, and some with Engineering mode support doesnt need rooting to use the mentioned tools for example OnePlus phone.
So my question, does LG phone also has this thing called Engineering mode? since LG wing is not supported for bootloader unlocking by LG yet.
Anyone has more experience with LG phone and perhaps the mentioned tool can shed some lights on the concern? Thanks.
Goid app. Well made
on LM-F100EMW,
1) use dialer code #*462633*#100#
2) go to Field Test > LTE Data Test > Tethering Mode, and select QMICM
3) go all the way back to first menu and go to SVC Menu> Port Check Test> Port Check Test and select enable
after that I am able to connect QPST. I used EFS explorer to fix CA-combos and carrier policy for my region/provider.
After doing your work, revert the changes to have a regular USB connection!!
for VOLTE first try to
1) make a new file or folder with name "enable_ue" (without quotes) on your phone's internal storage.
2) use dialer code #*462633*#100#
3) go to Field Test> Universal Enabler > Create New Config , enable VoLTE and confirm.
to add VOLTE indicator next to battery and signal strength on notification bar
1) use dialer code #*462633*#100#
2) go to Field Test > GPRI VoLTE/VoWiFi > IMS> select Sim Slot > Registration > VoLTE > and enable VoLTE Indication.
after all these
1) use dialer code #*462633*#100#
2) go to Field Test> IMS Settings> select Sim Slot > Test > Restart IMS process > select Yes
now you should have VoLTE enabled with notification bar indication
rigasLee said:
on LM-F100EMW,
1) use dialer code #*462633*#100#
2) go to Field Test > LTE Data Test > Tethering Mode, and select QMICM
3) go all the way back to first menu and go to SVC Menu> Port Check Test> Port Check Test and select enable
after that I am able to connect QPST. I used EFS explorer to fix CA-combos and carrier policy for my region/provider.
After doing your work, revert the changes to have a regular USB connection!!
Click to expand...
Click to collapse
rigasLee said:
on LM-F100EMW,
1) use dialer code #*462633*#100#
2) go to Field Test > LTE Data Test > Tethering Mode, and select QMICM
3) go all the way back to first menu and go to SVC Menu> Port Check Test> Port Check Test and select enable
after that I am able to connect QPST. I used EFS explorer to fix CA-combos and carrier policy for my region/provider.
After doing your work, revert the changes to have a regular USB connection!!
Click to expand...
Click to collapse
This is a good write up!Thanks for this!But,what modifications are you making in EFS Explorer to fix CA-combos and the carrier policies?I have a T-Mobile branded Wing,and I'm trying to enable VoLTE AND VoWifi for AT&T since this 3g shutdown went in effect?Mostly conerned with the VoLTE part because I can't make voice calls without it.Thanks for your help.
surgemanx said:
This is a good write up!Thanks for this!But,what modifications are you making in EFS Explorer to fix CA-combos and the carrier policies?I have a T-Mobile branded Wing,and I'm trying to enable VoLTE AND VoWifi for AT&T since this 3g shutdown went in effect?Mostly conerned with the VoLTE part because I can't make voice calls without it.Thanks for your help.
Click to expand...
Click to collapse
For volte i didnt change anything from EFS.
The changes i did in EFS was to add 5G for any carrier, because my carrier was not supported, and also to take the CA string from another phone's firmware, that my carrier has good support, and paste it where the outdated ca string was inside my wing's EFS.
rigasLee said:
For volte i didnt change anything from EFS.
The changes i did in EFS was to add 5G for any carrier, because my carrier was not supported, and also to take the CA string from another phone's firmware, that my carrier has good support, and paste it where the outdated ca string was inside my wing's EFS.
Click to expand...
Click to collapse
Okay thank!I've been trying to get this to work for 2 days now,and so far no go.I have even tried loading the mbn files with PDC and still no luck...
surgemanx said:
Okay thank!I've been trying to get this to work for 2 days now,and so far no go.I have even tried loading the mbn files with PDC and still no luck...
Click to expand...
Click to collapse
Try to extract and load .mbn file from T-mobile's firmware
rigasLee said:
Try to extract and load .mbn file from T-mobile's firmware
Click to expand...
Click to collapse
I'm on T-Mobile firmware,and I have tried and no go.If you extract modem_a or modem_b from the firmware it has all the carriers listed.
Hi. I have LG wing unlocked dual sim. But not getting volte. Tried the hidden menu option. It is showing in settings but looks ims not registered. Can you tell if you were able to get Volte on LG Wing without mbn loading. Also if mbn loading is needed, what is the process and where do you find the files for LG wing Malaysia carriers that I can use. I have another Samsung phone and that is fully volte supported. Can I copy something from it?
fuadhdmini said:
Hi,
Other phone models can use EFS Tool, QPST tool to do all the mentioned tasks.
And some phones to do that requires rooting phone since they dont have Engineering mode, and some with Engineering mode support doesnt need rooting to use the mentioned tools for example OnePlus phone.
So my question, does LG phone also has this thing called Engineering mode? since LG wing is not supported for bootloader unlocking by LG yet.
Anyone has more experience with LG phone and perhaps the mentioned tool can shed some lights on the concern? Thanks.
Click to expand...
Click to collapse
Were you able to get volte enabled on lg wing? I use this set in Malaysia.
rigasLee said:
for VOLTE first try to
1) make a new file or folder with name "enable_ue" (without quotes) on your phone's internal storage.
2) use dialer code #*462633*#100#
3) go to Field Test> Universal Enabler > Create New Config , enable VoLTE and confirm.
to add VOLTE indicator next to battery and signal strength on notification bar
1) use dialer code #*462633*#100#
2) go to Field Test > GPRI VoLTE/VoWiFi > IMS> select Sim Slot > Registration > VoLTE > and enable VoLTE Indication.
after all these
1) use dialer code #*462633*#100#
2) go to Field Test> IMS Settings> select Sim Slot > Test > Restart IMS process > select Yes
now you should have VoLTE enabled with notification bar indication
Click to expand...
Click to collapse
When i go to field test and click on ims settings it is showing not supported. I formated my phone and it became like this. Before formatting it used to work and I could see ims settings. My phone I bought from a shop and the shop keeper sent it rooted. Thatd when IMS settings were working..but after I did a reset saying not supported. How to bring it back?
surgemanx said:
This is a good write up!Thanks for this!But,what modifications are you making in EFS Explorer to fix CA-combos and the carrier policies?I have a T-Mobile branded Wing,and I'm trying to enable VoLTE AND VoWifi for AT&T since this 3g shutdown went in effect?Mostly conerned with the VoLTE part because I can't make voice calls without it.Thanks for your help.
Click to expand...
Click to collapse
Where are you located and what condition is your phone in? I've got an AT&T branded phone but I'm on TMO...maybe we can switch!
When I go to field menu in my Lg Wing, I go to IMS settings, it is completely blank. Someone please help me in registering the Volte in my Lg Wing. I am already rooted by able to patch the stock boot.img using magisk. My phone came with an unlocked bootloader and its the European firmware. I am trying to use this phone in Asia (Malaysia). Surprisingly, when I got the phone from the seller, it was not enabled volte but IMS settings in field menu would also show up (unlike now when I go there and it is blank), and also surprisingly, my volte worked also but by mistake I formatted my phone and after that it never worked. I then tried to flash the stock firmware and did root, installed voenabler but nothing seems to be helping.
I even tried loading mbn files of different carriers via PDC but no help. IMS settings always stay blank and volte doesn't get activated. Such a good phone but not able to work because my carrier here only supports volte.
If someone has an interest in helping, will be great.
How to edit CA String.
jazbaesu said:
When I go to field menu in my Lg Wing, I go to IMS settings, it is completely blank. Someone please help me in registering the Volte in my Lg Wing. I am already rooted by able to patch the stock boot.img using magisk. My phone came with an unlocked bootloader and its the European firmware. I am trying to use this phone in Asia (Malaysia). Surprisingly, when I got the phone from the seller, it was not enabled volte but IMS settings in field menu would also show up (unlike now when I go there and it is blank), and also surprisingly, my volte worked also but by mistake I formatted my phone and after that it never worked. I then tried to flash the stock firmware and did root, installed voenabler but nothing seems to be helping.
I even tried loading mbn files of different carriers via PDC but no help. IMS settings always stay blank and volte doesn't get activated. Such a good phone but not able to work because my carrier here only supports volte.
If someone has an interest in helping, will be great.
Click to expand...
Click to collapse
Lg g8x,g8,v60 Volte enable for all carriers, unlisted countries also
I will try to keep this post as small as possible. This will enable Volte for Phone ranging from Lg g8x, g8 and V60 without root or modifying the system files. Many have posted ways to get it, Iam only trying to help out the small bits missing...
forum.xda-developers.com
so i can just change my nt code to eu open with a korean firmware and volte and 5g starts working?

Categories

Resources