hey guys, i have a SM-G960F
The s9 got bricked because a usb port failed whilst flashing with heimdall. It is hard bricked, (doesn't turn on, no download mode, no recovery and not charging) . I need a debrick.img for it, could someone very kindly give it to me?
and, could a usb jig take me to download mode?
I have to add, that i am willing to pay, to whoever gives me the debrick.img
Thank you very much
Ib
Related
My friend got his i747m hard bricked after downloading this app "RomDownloader_v3_-_FIXED_apk" which was for some tablet...
It asked it for superuser access when rebooting and from there it didnt power up..
Not going into recovery or download mode.What are the options? am not in the us ,so i cant get a usb jig or use jtag...
Please Help!!!
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
wisammeesh said:
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
Click to expand...
Click to collapse
completely dead means stuck at boot or no sign of any powering on?
first thing I would try is a JIG, force it into download mode and see if u can flash the original firmware
for firmware download, I recommend sammobile.com. They also have guides showing how to do so If you are uncertain or new to this
If u dont own a JIG and not willing to wait for one to be shipped, u can build it your own. it is pretty simple, just couple of resistors and a micro usb port
oh, and dont be shy about what you have done. Provide the essential details always for better assistance
wisammeesh said:
Hello Everyone
please I have bricked my T-Mobile S2 when I try to flash new Rom by Odin suddenly its turned of & wont turn on again now its completely dead .
help me please to flash the factory img.
Click to expand...
Click to collapse
Will your computer recognize it? If you connect it to your computer with the USB cable I mean. If it only makes 3 beeping noises (the computer) and doesn't recognize it, and the phone doesn't turn on at all you will need either a JIG service or a JTAG service (most likely JTAG)
Thank you 4 ur help
I will make my own Jig but can you please help with a guide 4 how to use the Jig to force flash new rom?
I have a very hard problem here guys! Please help me!
My prob is that my Note II is stuck in boot loop, and I cant even enter the recovery mode. Now here's to make things worse... my USB flex port is damaged and it wont connect to my computer. That made me insane! Now I cant even revert to the stock firmware.
Please help me guys! We'll have our school tomorrow and I won't have a phone to bring with me. Plus, I dont want to inconvenience my parents. One more problem. Im out of warranty period so ifI bring my phone to a service center, Im sure Ill have to pay a lot.
Please tell me some ways to fix my phone. Thanks!
P.S. My phone can go to Download Mode but not to recovery.
GZ0ne05 said:
I have a very hard problem here guys! Please help me!
My prob is that my Note II is stuck in boot loop, and I cant even enter the recovery mode. Now here's to make things worse... my USB flex port is damaged and it wont connect to my computer. That made me insane! Now I cant even revert to the stock firmware.
Please help me guys! We'll have our school tomorrow and I won't have a phone to bring with me. Plus, I dont want to inconvenience my parents. One more problem. Im out of warranty period so ifI bring my phone to a service center, Im sure Ill have to pay a lot.
Please tell me some ways to fix my phone. Thanks!
P.S. My phone can go to Download Mode but not to recovery.
Click to expand...
Click to collapse
You need the usb port to use odin for download mode.
Since you can't boot elsewhere, you really need to fix the port first. Then flash the stock firmware on your own.
erljayp said:
You need the usb port to use odin for download mode.
Since you can't boot elsewhere, you really need to fix the port first. Then flash the stock firmware on your own.
Click to expand...
Click to collapse
So now I really am screwed. Can you tell me how to fix the USB port, and if it damages the phone in any way?
JIG
Maybe you should try USB JIG http://usbjig.com/
How do you charge your battery?
There must be some way to use your SD card to flash something from it.
Verny if his USB is not working then how he could use the jig.
Sent from my GT-N7100
Oh, sorry, my english isn´t very well... My mistake
Here you go my friend, shouldn't be hard or expensive to find a replacement board.
http://www.ifixit.com/Guide/Samsung+Galaxy+Note+II+USB+Board+Replacement/16413
Hi, can anybody help me with make unbrick image ? I just searched whole internet and nothing found. My phone is completly dead after OTA update. No charging, no download mode, recovery, nothing. Only QUALCOMM HS-USB QDLOADER 9008 when connect to pc without battery.
This is instruction how to make unbrick image when you have working N910P
https://forum.xda-developers.com/note-4-tmobile/general/help-test-unbrick-method-note-4-t3379897
So if anybody can help me I will be very graceful. Thanks !
Check this thread out. You may only find temporary relief but the wake lock app may gain more relief, however long that helps. Posts 40 and 45 outline a fix through Samsung that takes about a week.
https://forum.xda-developers.com/showthread.php?p=68854735
Sent from my SM-N920P using Tapatalk
Yes, but Samsung wants about 70$, so it's now worth of the phone. Still best way is unbrick image made by anybody with n910p. I can find it for n910f/g/w8 but not for sprint version. Anybody with this phone please help.
Or if you know other way how to turn download mode please tell.
Hello, this is a newbie mistake which is kind of funny because I've been doing phone repair for quite a while. I flash my Samsung phone but it failed so instead of restarting it from dl mode I removed the battery and after that mistake the phone now is dead. It won't even charge or boot to dl mode even though I used JIG. I find out while searching that you can use JTAG but it's so expensive on my end. Can you guys suggest any other tool or anyone of you can help me fix it?
YRARG said:
Hello, this is a newbie mistake which is kind of funny because I've been doing phone repair for quite a while. I flash my Samsung phone but it failed so instead of restarting it from dl mode I removed the battery and after that mistake the phone now is dead. It won't even charge or boot to dl mode even though I used JIG. I find out while searching that you can use JTAG but it's so expensive on my end. Can you guys suggest any other tool or anyone of you can help me fix it?
Click to expand...
Click to collapse
If you're at the point where you would have to use JTAG to repair a device, you're better off giving up and getting a new one. Getting the binary images you'd need is next to impossible.