| Need to revive my HARD-BRICKED Redmi 1s | First of all, let me clarify myself :
1. If I say SOFT-BRICKED, then that means the device is either stuck on boot screen or boot-loops., for which I don't need any assist, because one can still access the recovery mode (volume up + power button combination) or the fastboot mode (volume down + power button combination) and then you can flash proper stock ROM either {directly from recovery mode} or {through fastboot mode with the help of a PC and MiFlash Tool}. If that be the case then you can find proper ROM for your device on Mi official website with procedure on their forums and threads.
2. My problem is with HARD-BRICKED device, i.e. my Redmi 1s won't power on. And don't tell me to give the above mentioned solution for "SOFT-BRICKED" because I can't access neither the recovery mode nor the fastboot mode. If it did I would have already fixed it myself and 've no need to post this thread! Also the notification light on my Redmi 1s has gone dead, i.e. while charging it doesn't blinks anymore, nor does my PC recognizes it. Actually it is a problem of flashing wrong or improper ROM on the device.
Need Help ASAP
How to revive SOFT-BRICKED Redmi 1s
To revive your SOFT-BRICKED Redmi 1s, (i.e. the screen is stuck on boot screen) follow the procedure :
1. Download the Mi Flash Tool on your PC.
2. Download the latest Gloabal version of Redmi 1s Fastboot ROM on your PC.
3. Extract the ROM zipped file which you downloaded.
4. Open Mi Flash Tool. Browse and select the "images" folder inside the folder which you extracted.
5. Click on "Browse" to access drop-down menu and select "Advanced". In the new dialog box, make sure that FlashBoot Script is set default to "flash_all_except_storage.bat".
6. Now press the volume down + power button on your Redmi 1s till you see the Mi Fastboot Logo.
7. Now connect your Redmi 1s to your PC; and in Mi Flash Tool click refresh to view your device in the list below. Once displayed, select it and hit the "Flash" button.
8. Download the Gloabal version of Redmi 1s Recovery ROM on your PC. Note that this is Recovery ROM and the previous one was Fastboot ROM. They Both are not the same.
9. Once you've downloaded the Recovery ROM, rename the zipped file to "update.zip" and keep it permanently in the root-folder of your internal memory of Redmi 1s. This will help you to flash Stock ROM just by going into Recovery Mode (volume up + power button combination) and selecting install update.zip. Next time if the same problem occurs, you won't have to use the above procedure again. Just re-Flash the ROM from Recovery Mode.
Hope I could've helped.
Bu1ba$aur said:
To revive your SOFT-BRICKED Redmi 1s, (i.e. the screen is stuck on boot screen) follow the procedure :
Hope I could've helped.
Click to expand...
Click to collapse
You didn't understand that it can't acces the fastboot?
Because is not my work I give you the link:
HERE
Hope that you can solve your problem.
Solution?
Hi,
did you finally got a solution to your HARD bricked problem?
i have same issue (completely dead)
i do have the same problem please inform me if any gets solution for this
my redmi 1s is dead. i insert usb cable in phone then charging led blinking but not detected in windows. what can i do? plz help.............
same problem here, it detects COM10 port on windows7 pc
same problem here, it detects COM10 port on windows7 pc when connected, qualcomm device, any chance to get back from here, Authorised service center would be able to help me???
---------- Post added at 02:56 PM ---------- Previous post was at 01:59 PM ----------
Bu1ba$aur said:
| Need to revive my HARD-BRICKED Redmi 1s | First of all, let me clarify myself :
1. If I say SOFT-BRICKED, then that means the device is either stuck on boot screen or boot-loops., for which I don't need any assist, because one can still access the recovery mode (volume up + power button combination) or the fastboot mode (volume down + power button combination) and then you can flash proper stock ROM either {directly from recovery mode} or {through fastboot mode with the help of a PC and MiFlash Tool}. If that be the case then you can find proper ROM for your device on Mi official website with procedure on their forums and threads.
2. My problem is with HARD-BRICKED device, i.e. my Redmi 1s won't power on. And don't tell me to give the above mentioned solution for "SOFT-BRICKED" because I can't access neither the recovery mode nor the fastboot mode. If it did I would have already fixed it myself and 've no need to post this thread! Also the notification light on my Redmi 1s has gone dead, i.e. while charging it doesn't blinks anymore, nor does my PC recognizes it. Actually it is a problem of flashing wrong or improper ROM on the device.
Need Help ASAP
Click to expand...
Click to collapse
I found this on miui.com
thread-54139-1-1.html
try this and update ASAP here
Same but Different
@Bu1ba$aur I think i have the HardBricked symptoms but in my case when i do flash my MT6592 device it works... i mean, the program (SP Flash Tool) says it's complete, no problems, no errors, full progress bar but, at the end my phone doesn't nothing, no boot, no logo, no charging, and i've been tryng with its stock rom
Hello..I have a similar situation here. I Couldn't locate the solution here if there is any..can someone please point to the right direction.
My Situation:- My Redmi 1s does not recognize by the PC nor in Linux using lsusb command. I had also tried the "Touch point" Method as advised in the official Miui Forum. In Nutshell, My device is hard bricked and there is noway to revive it per my knowledge. So, If anyone can help me out here would be great..and I would appreciate it greatly.
Thanks.
i think this could help you all. follow the instructions carefully
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292
Hi
Redmi 1S
same problem.
The above link tried not working cause unable to go to fastboot mode.
Help please
Thanks in advance
my 1s got stuck at mi logo screen, but i flashed successfully via fastboot mode. Still it doesnt workout,pls help asap!
Bu1ba$aur said:
| Need to revive my HARD-BRICKED Redmi 1s | First of all, let me clarify myself :
1. If I say SOFT-BRICKED, then that means the device is either stuck on boot screen or boot-loops., for which I don't need any assist, because one can still access the recovery mode (volume up + power button combination) or the fastboot mode (volume down + power button combination) and then you can flash proper stock ROM either {directly from recovery mode} or {through fastboot mode with the help of a PC and MiFlash Tool}. If that be the case then you can find proper ROM for your device on Mi official website with procedure on their forums and threads.
2. My problem is with HARD-BRICKED device, i.e. my Redmi 1s won't power on. And don't tell me to give the above mentioned solution for "SOFT-BRICKED" because I can't access neither the recovery mode nor the fastboot mode. If it did I would have already fixed it myself and 've no need to post this thread! Also the notification light on my Redmi 1s has gone dead, i.e. while charging it doesn't blinks anymore, nor does my PC recognizes it. Actually it is a problem of flashing wrong or improper ROM on the device.
Need Help ASAP
Click to expand...
Click to collapse
Just see this tutorial it will definitely help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
amas said:
Hi
Redmi 1S
same problem.
The above link tried not working cause unable to go to fastboot mode.
Help please
Thanks in advance
Click to expand...
Click to collapse
This will help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
:good::good::good::good:
adharshvr said:
Just see this tutorial it will definitely help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
This will help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
:good::good::good::good:
Click to expand...
Click to collapse
Can anyone proof if this works?
Or will this work on xiaomi note pro ?
I have problem is 2013029 redmi 1s flash after dead only show red light... Qualcomm port 9008 port not show only show 9006 port than not a flash any tool. please any solution is hardware issue ya software issue guide me
my redmi 1s is stuck in bootloop
I cant access recovery mode or Fastboot mode
Device restarts by itself once i plug in battery.
Help please
hi !!
i will try to explain my problem sorry for my bad english
mi redmi note 5a its bricked and i flashed a ROM with diferent versions of miflash i used testpoint method because my bootloader is blocked ,the most of versions of miflash that i try end with sucess but when my phone boot only appear in the screen a little penguin of linux and i can´t enter to fastboot and recovery and is the same result when i restart with power button also i tried drain my battery and remove the conector ,conect my charger and reconnect the battery conector for the charge start correctly.
i know what is the correct solution for this thanks for help !!
A BIG SORRY for a long post. But I am sure its worth reading step by step. Because many peoples are stucked in same situation, no straight forward solution for this issue is available till now. All solutions are based on 50/50 success ratio.
I think if my issue is resolved then it can become WORLD's FIRST SOLUTION to UNBRICK NOTE 5 PRO with 100/100 success ratio.
About Me: I am an ordinary Android user since years. I know how to root and install TWRP and Custom ROMs on any Android Phone. I am not a Developer, every thing discussed here is purely gained by experiments by playing with my phone.
After playing with my bricked phone I reach at a point where I am hopeless and I think at this stage a Developer can help me only, who have deep knowledge of android OS. That's why I called Devs to help me.
About Phone I have Note 5 Pro Global (whyred)M1803E7SG. Phone is under warranty but unfortunately Front Glass of my phone is broken few months ago but still working, so Mi Service Center refused to accept my phone under warranty due to broken Front Glass. Tried to repair my phone by a local Phone Service Shop, thay have all professional tools like UMT, Avangers, MedusaPro etc. but they were also unable to repair my phone. Now I have no option left other than I should repair it by myself.
Phone was on ARB4, was working fine. Bootloader Unlocked and I have rooted it long time ago and was playing with it since it is rooted by flashing different Custom ROMs on daily basis.
Currently phone was working fine on Masik X 4.1 ROM. Some days ago I flashed Masik X 5.0 ROM via TWRP on my phone and after reboot phone became dead and went to EDL 9008 mode. I noticed that I flashed Masik X 5.0 for Note 6 Pro (tulip) ROM on it mistakenly.
Journey Stats Here:
1 - After bricking my phone I tried to flash fastboot ROM for whyred in EDL mode, phone flashed successfully but still stucked in EDL mode. Tried all fastboot ROMs from ARB2 to ARB4 but still no sign of life, phone was not coming out of EDL mode. Also tried "test anti4.zip" files as well but phone is still in EDL mode after a successful flashing.
2 -After that I tried to flash fastboot ROM of Note 6 Pro (tulip) in EDL mode, after flashing complete when I tried to turn ON my phone, I noticed that phone try to start with vibrate and charging light blinks for a while but nothing on Screen and phone dead again. I checked with USB cable attached to laptop, nothing appear in Device Manager. Here I opened my phone and bring it to EDL mode via Test Point method.
3 - Then after searching on internet I saw on a forum where another person was in same situation. He mentioned his phone display was turning ON on a Mi 6X (wayne) ROM but with "Press any key to shutdown" message on screen. So tried same with Mi 6X (wayne) ROM. Phone is turning ON with "Press any key to shutdown". So I started playing with Mi 6X ROM. I started replacing Mi 6X ROM file with Note 5 Pro files one by one and flashing my phone again and again with every one new file (took so many hours in playing with my phone:crying. Initially had many issues like: missing keymaster64.mbn file as Mi 6X uses keymaster64.mbn but Note 5 Pro is using keymaster.mbn file (so corrected .xml and .bat files according to need), Unable to mount Persist partition in TWRP (corrected it by terminal method in TWRP by using command "make_ext4fs /dev/block/bootdevice/by-name/persist", phone was going to Fastboot for a while, Not going to recovery mode, No USB detection on laptop in Device Manager. Fastboot lasts for a half second and then phone goes off.
In short at the end finally I noticed only three files "abl.elf, pmic.elf, xbl.elf" from Mi 6X ROM are responsible for turning my phone ON.
4 - So I replaced "abl.elf, pmic.elf, xbl.elf" files from Mi 6X ROM with Note 5 Pro ROM files and flashed my phone with this new modified ROM in EDL mode. Phone turned on without any "Press any key to shutdown" message on screen. Now phone can go to fastboot mode and detected on USB on my laptop. But not going to Recovery mode, after pressing Vol UP + Power Button, only a black screen and nothing happening on my laptop Device Manager (no driver at all). In fastboot mode I flashed "PitchBlack-whyred-2.9.0-20190501-1030-OFFICIAL" recovery (initially I tried TWRP Recovery for whyred but in TWRP phone was not detected as MTP device on my laptop, so I used Pitchblack Recovery) and after issuing boot command to recovery.img I can go to Pitchblack recovery mode, phone detected on USB port as "Note 5 Pro", MTP drive appear in My Computer, I can copy/paste files in phone Storage. In Recovery mode I flashed Official "miui_HMNote5Global_V10.3.1.0.PEIMIXM_d4d2c9f2aa_9.0" ROM. Phone flashed successfully but after reboot phone went to EDL mode again. So I revived it again with modified ROM.
5 - After revival I tried to boot phone in normal way, I noticed that MI Splash screen is blinking with behavior: Splash screen appears fine for a while and on second blink Screen is inverted then 3rd blink Screen fine and 4th blink screen inverted and so on till I reach to MIUI10 welcome screen. On welcome screen the behavior is same like once fine then inverted. But here my touch screen is not working, I can't go after this screen. Phone is not allowing to touch Next button. I can charge my phone with charger connected. Phone detected as "Note 5 Pro" on my laptop.
6 - I rebooted phone to fastboot mode, tried to flash "whyred_global_images_V10.3.1.0.PEIMIXM_20190522.0000.00_9.0_global_8201319a7e" with MiFlash but can't flash due to "Product Mismatch" warning by MiFlash. Tried Mi 6X ROM and MiFlash started flashing fine.
7 - Then I flashed "boot.img, recovery.img, cust.img, system.img" files by using fastboot flash xx xxx.img commands for Note 5 Pro. Fastboot flashed all files successfully. But after rebooting phone behavior is same like blinking inverted screen and touch not working.
8 - Now I am helpless at this stage. Tried all ways to revive my phone. Nothing else is remaining as I think. No other file is remaining which I can try.
HELP REQUIRED FROM A Developer
I reached on a stage where my phone is now "Semi Unbricked" but is still useless for me. But I hope some Developer can help me to revive my phone.
My Note 5 Pro is converted to Mi 6X but touch screen is not working. Screen is working fine in Pitchblack Recovery mode, phone is responding in Fastboot mode but as it is the fastboot mode of Mi 6X on a Note 5 Pro so it is useless for my phone.
Kindly assist me further so I can replace Mi 6X fastboot with original Note 5 Pro fastboot so that I can flash Note 5 Pro ROM on it.
Waiting for a very positive and prompt reply.
Regards!
Any body knows about display/touch driver files inside Android OS???
My touch screen is not working at all on MIUI Welcome screen. I want to embed Display Driver files in ROM so I can go forward ahead of this Welcome Screen.
I have tried so many ROMs from different Xiaomi models, replaced so many files one by one, spent too much time on doing this all. But the only combination of files works mentioned below:
abl.elf (must be from wayne ROM)
pmic.elf (must be from wayne or tulip ROMs, both working)
xbl.elf (must be from wayne ROM)
All other files from whyred ROM are OK to flash to bring my phone alive.
ROMs Used:
whyred_global_images_V10.3.1.0.PEIMIXM_20190522.0000.00_9.0_global_8201319a7e
wayne_images_V10.3.3.0.PDCCNXM_20190514.0000.00_9.0_cn_1d4725ac4d
tulip_global_images_V10.3.2.0.PEKMIXM_20190426.0000.00_9.0_global_2264f9bd86
Now I concluded all this mess as: I can never go back to whyred original ROM. The only way left is to use my phone as a Mi 6X by name if touch screen of my mobile gets start working.
Some body please help me in replacing Display Driver files of whyred with wayne files.
Kindly assist me to pass through this step. I want to see what's working and what's not after MIUI Welcome Screen. e.g. IMEI, BT, WIFI, SOUND, CALL etc......
Please help
Hello everyone, I have and old Xiaomi Redmi 1s which is having an issue.
When I connect the phone to charging cable the red led blinks once and then nothing happens
When I connect the phone to pc. The pc recognizes it with the name something Qualcomm and nothing happens in the phone same red led blinks and then nothing
When the phone is connected to pc without the battery the mi logo flashes and turns off in every 2 sec, and when I press just the vol down button the fastboot mode flashes and stays there.
I have tried flashing .tgz fastboot rom from fastboot by miflash tool. But nothing happens same situation.
Plzz Help me.
Hi, I've successfully resuscitated my redmi 1W. The steps are the same except you have to select the redmi 1S rom from Xiaomi. LEt me know if you need help
The downside is that the phone now has a generic serial number. (If you know of now to reinsert the phone serial number, please let me know) So if you have apps that needs to detect the phone serial number, please do not follow these steps.
Redmi 1W recovery steps