| Need to revive my HARD-BRICKED Redmi 1s | First of all, let me clarify myself :
1. If I say SOFT-BRICKED, then that means the device is either stuck on boot screen or boot-loops., for which I don't need any assist, because one can still access the recovery mode (volume up + power button combination) or the fastboot mode (volume down + power button combination) and then you can flash proper stock ROM either {directly from recovery mode} or {through fastboot mode with the help of a PC and MiFlash Tool}. If that be the case then you can find proper ROM for your device on Mi official website with procedure on their forums and threads.
2. My problem is with HARD-BRICKED device, i.e. my Redmi 1s won't power on. And don't tell me to give the above mentioned solution for "SOFT-BRICKED" because I can't access neither the recovery mode nor the fastboot mode. If it did I would have already fixed it myself and 've no need to post this thread! Also the notification light on my Redmi 1s has gone dead, i.e. while charging it doesn't blinks anymore, nor does my PC recognizes it. Actually it is a problem of flashing wrong or improper ROM on the device.
Need Help ASAP
How to revive SOFT-BRICKED Redmi 1s
To revive your SOFT-BRICKED Redmi 1s, (i.e. the screen is stuck on boot screen) follow the procedure :
1. Download the Mi Flash Tool on your PC.
2. Download the latest Gloabal version of Redmi 1s Fastboot ROM on your PC.
3. Extract the ROM zipped file which you downloaded.
4. Open Mi Flash Tool. Browse and select the "images" folder inside the folder which you extracted.
5. Click on "Browse" to access drop-down menu and select "Advanced". In the new dialog box, make sure that FlashBoot Script is set default to "flash_all_except_storage.bat".
6. Now press the volume down + power button on your Redmi 1s till you see the Mi Fastboot Logo.
7. Now connect your Redmi 1s to your PC; and in Mi Flash Tool click refresh to view your device in the list below. Once displayed, select it and hit the "Flash" button.
8. Download the Gloabal version of Redmi 1s Recovery ROM on your PC. Note that this is Recovery ROM and the previous one was Fastboot ROM. They Both are not the same.
9. Once you've downloaded the Recovery ROM, rename the zipped file to "update.zip" and keep it permanently in the root-folder of your internal memory of Redmi 1s. This will help you to flash Stock ROM just by going into Recovery Mode (volume up + power button combination) and selecting install update.zip. Next time if the same problem occurs, you won't have to use the above procedure again. Just re-Flash the ROM from Recovery Mode.
Hope I could've helped.
Bu1ba$aur said:
To revive your SOFT-BRICKED Redmi 1s, (i.e. the screen is stuck on boot screen) follow the procedure :
Hope I could've helped.
Click to expand...
Click to collapse
You didn't understand that it can't acces the fastboot?
Because is not my work I give you the link:
HERE
Hope that you can solve your problem.
Solution?
Hi,
did you finally got a solution to your HARD bricked problem?
i have same issue (completely dead)
i do have the same problem please inform me if any gets solution for this
my redmi 1s is dead. i insert usb cable in phone then charging led blinking but not detected in windows. what can i do? plz help.............
same problem here, it detects COM10 port on windows7 pc
same problem here, it detects COM10 port on windows7 pc when connected, qualcomm device, any chance to get back from here, Authorised service center would be able to help me???
---------- Post added at 02:56 PM ---------- Previous post was at 01:59 PM ----------
Bu1ba$aur said:
| Need to revive my HARD-BRICKED Redmi 1s | First of all, let me clarify myself :
1. If I say SOFT-BRICKED, then that means the device is either stuck on boot screen or boot-loops., for which I don't need any assist, because one can still access the recovery mode (volume up + power button combination) or the fastboot mode (volume down + power button combination) and then you can flash proper stock ROM either {directly from recovery mode} or {through fastboot mode with the help of a PC and MiFlash Tool}. If that be the case then you can find proper ROM for your device on Mi official website with procedure on their forums and threads.
2. My problem is with HARD-BRICKED device, i.e. my Redmi 1s won't power on. And don't tell me to give the above mentioned solution for "SOFT-BRICKED" because I can't access neither the recovery mode nor the fastboot mode. If it did I would have already fixed it myself and 've no need to post this thread! Also the notification light on my Redmi 1s has gone dead, i.e. while charging it doesn't blinks anymore, nor does my PC recognizes it. Actually it is a problem of flashing wrong or improper ROM on the device.
Need Help ASAP
Click to expand...
Click to collapse
I found this on miui.com
thread-54139-1-1.html
try this and update ASAP here
Same but Different
@Bu1ba$aur I think i have the HardBricked symptoms but in my case when i do flash my MT6592 device it works... i mean, the program (SP Flash Tool) says it's complete, no problems, no errors, full progress bar but, at the end my phone doesn't nothing, no boot, no logo, no charging, and i've been tryng with its stock rom
Hello..I have a similar situation here. I Couldn't locate the solution here if there is any..can someone please point to the right direction.
My Situation:- My Redmi 1s does not recognize by the PC nor in Linux using lsusb command. I had also tried the "Touch point" Method as advised in the official Miui Forum. In Nutshell, My device is hard bricked and there is noway to revive it per my knowledge. So, If anyone can help me out here would be great..and I would appreciate it greatly.
Thanks.
i think this could help you all. follow the instructions carefully
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292
Hi
Redmi 1S
same problem.
The above link tried not working cause unable to go to fastboot mode.
Help please
Thanks in advance
my 1s got stuck at mi logo screen, but i flashed successfully via fastboot mode. Still it doesnt workout,pls help asap!
Bu1ba$aur said:
| Need to revive my HARD-BRICKED Redmi 1s | First of all, let me clarify myself :
1. If I say SOFT-BRICKED, then that means the device is either stuck on boot screen or boot-loops., for which I don't need any assist, because one can still access the recovery mode (volume up + power button combination) or the fastboot mode (volume down + power button combination) and then you can flash proper stock ROM either {directly from recovery mode} or {through fastboot mode with the help of a PC and MiFlash Tool}. If that be the case then you can find proper ROM for your device on Mi official website with procedure on their forums and threads.
2. My problem is with HARD-BRICKED device, i.e. my Redmi 1s won't power on. And don't tell me to give the above mentioned solution for "SOFT-BRICKED" because I can't access neither the recovery mode nor the fastboot mode. If it did I would have already fixed it myself and 've no need to post this thread! Also the notification light on my Redmi 1s has gone dead, i.e. while charging it doesn't blinks anymore, nor does my PC recognizes it. Actually it is a problem of flashing wrong or improper ROM on the device.
Need Help ASAP
Click to expand...
Click to collapse
Just see this tutorial it will definitely help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
amas said:
Hi
Redmi 1S
same problem.
The above link tried not working cause unable to go to fastboot mode.
Help please
Thanks in advance
Click to expand...
Click to collapse
This will help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
:good::good::good::good:
adharshvr said:
Just see this tutorial it will definitely help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
---------- Post added at 10:30 AM ---------- Previous post was at 10:29 AM ----------
This will help you : http://en.miui.com/forum.php?mod=viewthread&tid=54139&extra=&highlight=redmi+1S+no+fastboot&page=1
:good::good::good::good:
Click to expand...
Click to collapse
Can anyone proof if this works?
Or will this work on xiaomi note pro ?
I have problem is 2013029 redmi 1s flash after dead only show red light... Qualcomm port 9008 port not show only show 9006 port than not a flash any tool. please any solution is hardware issue ya software issue guide me
my redmi 1s is stuck in bootloop
I cant access recovery mode or Fastboot mode
Device restarts by itself once i plug in battery.
Help please
Hey guys,
My Remdi 1S was bricked during flashing a wrong Rom,
Now screen not turning on,recovery is not opening,also fastboot is not opening.
Mi Flash detects device at COM 10 but i cannot enter into fastboot so its showing error.
Whenever i plug data cable into device,led notification light glows once(for 0.1sec) and then goes off.
In charging mode led notification light also does not glows.
Any tool for snapdragon like SP FLASH tool which works on MTK devices which was capable to unbrick Hard Bricked devices too.
did you try this
http://en.miui.com/thread-54139-1-1.html
hi !!
i will try to explain my problem sorry for my bad english
mi redmi note 5a its bricked and i flashed a ROM with diferent versions of miflash i used testpoint method because my bootloader is blocked ,the most of versions of miflash that i try end with sucess but when my phone boot only appear in the screen a little penguin of linux and i can´t enter to fastboot and recovery and is the same result when i restart with power button also i tried drain my battery and remove the conector ,conect my charger and reconnect the battery conector for the charge start correctly.
i know what is the correct solution for this thanks for help !!
After I try to flash twrp using Miui 11 the device turned brick, follow the tutorial to resurrect the RN8PRO without using Mi Authorized Account:
0 - If your RN8PRO turns brick and is connected to USB on the pc just 5 seconds make this tutorial.
1 - This method works only if you have installed TWRP and the device turned brick.
2 - Disassemble your device by doing test point your device asks for mi.
3 - After trying to pass the official rom via miflash or sptools, the RN8PRO asks for the authorized account. CANCEL.
4 - Disconnect all devices from the motherboard, GPS, 3G ANTENNA, CAMERAS and WIFI, leave only the battery on, if the procedure does not work disconnect the battery too.
5 - At this point your device will be working perfectly, plug in the USB cable, press the power button + volume button - the device will go into fastboot, flash to rom STOCK by miflash leaving selecting the Clean All option only. Wait to flash the rom , this process may take 15 minutes.
6 - After Flash your device will turn on normally, turn off the device, remove the USB cable, reconnect all previously disconnected devices, close the device and turn on again.
7 - Ready your device will be working again. :fingers-crossed:
8 - If the procedure is unsuccessful, wait for 4 to 5 days for his battery to completely exhaust, charge it for 3 hours and then redo the process. :good:
portugueiz2 said:
After I try to flash twrp using Miui 11 the device turned brick, follow the tutorial to resurrect the RN8PRO without using Mi Authorized Account:
0 - If your RN8PRO turns brick and is connected to USB on the pc just 5 seconds make this tutorial.
1 - This method works only if you have installed TWRP and the device turned brick.
2 - Disassemble your device by doing test point your device asks for mi.
3 - After trying to pass the official rom via miflash or sptools, the RN8PRO asks for the authorized account. CANCEL.
4 - Disconnect all devices from the motherboard, GPS, 3G ANTENNA, CAMERAS and WIFI, leave only the battery on, if the procedure does not work disconnect the battery too.
5 - At this point your device will be working perfectly, plug in the USB cable, press the power button + volume button - the device will go into fastboot, flash to rom STOCK by miflash leaving selecting the Clean All option only. Wait to flash the rom , this process may take 15 minutes.
6 - After Flash your device will turn on normally, turn off the device, remove the USB cable, reconnect all previously disconnected devices, close the device and turn on again.
7 - Ready your device will be working again. :fingers-crossed:
8 - If the procedure is unsuccessful, wait for 4 to 5 days for his battery to completely exhaust, charge it for 3 hours and then redo the process. :good:
Click to expand...
Click to collapse
This is good for a last resort.. Specially since this phone doesn't have water proofing..
Thread cleaned
Please do not request/advertise/exchange remote unlock services on xda-developers(see Forum Rules 7,11,13):highfive:
Thank you all!
strongst
Forum Moderator
Hi, my r8 pro has bricked recently, i'm really scared, can you help me? i already tried these options:
°boot > recovery = black screen
°boot > fastboot = black screen
°boot = black screen
°i disassembly my cellphone and disconected and re conected the battery but nothing
°i'm trying to drain battery power to 0% because it was charged to 80% and now i'm connecting some things to negative and positive parts of the cable of the battery to consume energy and drain the battery
°i tried "test point" but it is the same has enter to the recovery (vol+ pwr) because it boot to the recovery, and it ask me for MI account authorized when i try to flash stock rom in sp download tool
my redmi note 8 pro only led blinks when i connect the usb to my pc or when i charge it.
Can you help me? please. my discord
zumboy#2354
zumboy said:
Hi, my r8 pro has bricked recently, i'm really scared, can you help me? i already tried these options:
°boot > recovery = black screen
°boot > fastboot = black screen
°boot = black screen
°i disassembly my cellphone and disconected and re conected the battery but nothing
°i'm trying to drain battery power to 0% because it was charged to 80% and now i'm connecting some things to negative and positive parts of the cable of the battery to consume energy and drain the battery
°i tried "test point" but it is the same has enter to the recovery (vol+ pwr) because it boot to the recovery, and it ask me for MI account authorized when i try to flash stock rom in sp download tool
my redmi note 8 pro only led blinks when i connect the usb to my pc or when i charge it.
Can you help me? please. my discord
zumboy#2354
Click to expand...
Click to collapse
Discharging battery will only be useful for when recovery/boot are not crashed. When anything happened, installing twrp, boot image etc, it will very easy to crash, based on your desc, it's hard bricked, need authorised account to refresh. Prepare for $30 to deep flash....
Hi I recently try to flash a Stock Android One to my Xiaomi Mi a2 lite (Global Version of Redmi 6 pro).
I used Mi flashtool and I download a Fastboot Image file that matches my device model but my phone is bricked
the notification light is blinking when ever I push the power button. And I cannot know when my phone is charging there are no display that my phone is charging and when I press the Volume down and Power button I cannot access the Fastboot mode so I just simply attached my phone to the Computer and I shocked when I heared of a sound that my device was read by the computer but the phone is dead that time so I use the Miflash tool and It detect my phone but when I use powershell and command fastboot devices it doesnt recognized or detecting my phone.
So I decided to flash the rom to my phone because it can detect it, but Its taking too long to flash, 1500 seconds has passed but the flashing is not finish so I decided to unplug my phone but the xiaomi flash tool is still flashing so I thought that the app is corrupted so I just exit the app and open it again and do the flashing again but 2000 seconds has passed and still its the same thing I unplug the phone and the flashing still continue so I decided to stop it.
After some time I try to plug my device again but the computer dont recognized the phone anymore, the connected device sound has not triggered and the miflash tool has not recognized my phone anymore and the blinking notification light is not present too.
Please anyone help me I need this phone to attend my Online Classes please.
Similar situation here. Tried to flash Magisk. Stuck on a boot loop. Then I tried to flash Global a2 lite ROM.
Now my phone is stuck in EDL mode with 900E Drivers I see random numbers in MiFlash. When I install 9008 drivers I see the COM10 and the same random numbers on the device info in the MiFlash tool.
Taking like 30 minutes to flash and never ends. If someone has the Auto unbrick Mi a2 Lite software
please post it here so we can try to flash with this one.