Hi.
I have been using this forum for years but this is the first time I started a thread so I hope it hasn't been answered before. I did a search but didn't see anything that matches my query.
I have a Sony bravia XF9005 running android 7 and I haven't updated android since I bought it.
I was trying to get a video conferencing app to work on the TV because I had been using screen mirroring from apps on my phone but the quality was hit and miss and it wasn't as convenient as doing it directly on the TV.
I have managed to get Skype Lite, Zoom and Jami onto the TV and used TV App Repo to create shortcuts for them in the launcher.
I have connected a logitech C270 webcam to the TV and got it to work for video. I got this working by switching the TV to pro mode and running Skype which then connected to the camera. When I switch back to normal TV mode Skype, Zoom and Jami all work fine with the camera but the audio mic built-in to the camera is not working.
I got around this problem by connecting a USB mic to another USB port on the TV and it works well when I can get the apps to connect to it. The mic I am using is a Blue Yeti.
In Skype lite if I make a video call to another Skype account everything seems fine until both devices are connected but then I have no audio from the Yeti. I have found a quick way around this is to make an audio call to the other device, the yeti is recognised and the audio works perfectly, then I just switch on the video and both work fine. It is the same for receiving a Skype call, if I answer with video the Yeti doesn't work but if I answer as audio only it works fine, then I can just switch the video on and it's all good again. I'm not too bothered about this as the workaround is easy enough.
In Zoom I have been able to get it to work well with both the camera and the mic but there are problems with it too. When I first installed the latest Zoom app and started a meeting it asks me for permission to use my video and my audio. When I give permission both work perfectly and I have had 4 devices in a meeting with no problems at all. As long as I don't close the app I can go from meeting to meeting with no problem but when I close the app and open it again I have no audio from the Yeti. I found a workaround on this as well but it is not as easy as the Skype one. Before I open Zoom I go to the app settings and permissions and disable the microphone permission for Zoom. Then when I create a meeting the app asks me for the mic permission and everything works perfectly again.
I have gone into the developer options and changed the Select USB Configuration to Audio Source. I have also allowed zoom to automatically switch on the sound in one of its settings but neither has made any difference. It seems like after the app is closed it doesn't recognise the mic on the next use.
Is there a way of automatically disabling a permission for an app after the app is closed or does anyone know of another workaround. I know that the apps aren't designed to work on the Android TV version of Android but bar these little problems they do work well.
I haven't really played around with Jami as much as the others so I haven't looked to see if I can get the audio working with it but the video works fine. I also tried the normal Skype app but it tends to turn itself into portrait mode when you are making calls or changing settings whereas the Skype Lite app runs perfectly in landscape all the time and it is much quicker too.
I was going to try Tellybean but I haven't got around to it yet plus most people already know Skype and now Zoom whereas I'm not sure how wide Tellybean is known.
Thanks for any help.
Hmm, a difficult situation. Have you solved this problem yet? A friend of mine works with conferences on https://brightvisionevents.co.uk/conferences / and he often gives me advice about my work because I often use conferences. I had a similar situation. Most likely, this is an incorrect operation of the microphone drivers. I think either reinstalling Windows or removing the microphone drivers and installing them from the official website of your Blue Yeti microphone can help you. I hope my advice helped you and you will solve your problem. Write if you have succeeded in everything, maybe it will help someone. Good luck!
Related
some has ripped the new yahoo video app from a tmobile rom
http://forum.xda-developers.com/showthread.php?t=812548
has anyone tested it, report says the SGS only works with the rear camera, but can anyone with 2.2 test it and see if the front camera works.
Tested on JP6 and only rear camera available...
almi88 said:
Tested on JP6 and only rear camera available...
Click to expand...
Click to collapse
darn, have to wait for yahoo to fix it then
cant get it working, pressed Video but nothing happening :<
hopefully it will work one day
at least they're working on it
Edit: Got it working with the back camera calling to PC
better than nothing, thats progress at least
aim with vid would be nice
Working on froyo but the app use bak cam ugjhhh
Sent from my GT-I9000 using XDA App
Use the Options>About Messenger>Report A Problem menu to report this to yahoo if you want it to be fixed.
I was just using this today. Its pretty f'n awesome; Being able to video call to yahoo users really opens up the functionality. Lets hope they add support for the front facing cam soon...
you can always talk in a mirror
it is currently working fine with video chat, it just picks the back camera instead of the front
I tried it at home from my SGS to PC and it worked decently enough
however i tried from my SGS to my friend's iphone4 who is half the world away and it was pretty laggy :<
And the iphone app is still miles better than the android one when it comes to speed. Hope they optimize it soon!
also they released video calling for iphone but it doesnt work on the ipod touch 4 which has 2 cameras.
Has anybody tried voice calling sans the video? How do you rate that? Does it work with earphones? Can you use earphones with video calling and use back camera for that?
You cannot skip the video. Or, at least, I didn't realized how to do that.
I am in London , And i have Galaxy S with Three ....
Some how i cannot Make Video Call .... It Just COmes on a Blank Screen where says Calling and then nothing happens for along time , then i just end call ...
Using Three Custom Stock ROM
any help
lover_faizy said:
I am in London , And i have Galaxy S with Three ....
Some how i cannot Make Video Call .... It Just COmes on a Blank Screen where says Calling and then nothing happens for along time , then i just end call ...
Using Three Custom Stock ROM
any help
Click to expand...
Click to collapse
I'm with ya on that one...it just sits there "calling".
Yup with ya. Installed Yahoo messenger and set up a second test account. Try calling from phone or PC and nothing happens on the other. Call is not notified and ends as unanswered.
May be there are only some lucky people who can Make Video Calls Right Now ... Looks like we will have to wait for the Official Yahoo Video Version for Us
aditya104 said:
Has anybody tried voice calling sans the video? How do you rate that? Does it work with earphones? Can you use earphones with video calling and use back camera for that?
Click to expand...
Click to collapse
I'm running SGS with 2.2 froyo here, and the answer is no it doesn't work with headset, and there is a big feedback between the phone speaker and its mic, you'll keep on hearing echo.
By the way it works when you call the computer with the phone but not vice versa. The voice quality was great, if you are hearing it from the computer but if you are using the phone you will keep on hearing echoes.
It only recognize the back 5mp camera, and even there is a switch camera option, still you couldn't choose the front camera when chatting.
But still this was one great app, at least somehow it is working... hope there will improvements when it comes to compatibility with SGS when the official version comes out.
I have searched and can't find a way to achieve this but I need to record video but use a connected Bluetooth headset as the mic source. Is there custom camera app that can handle this? I used recording apps which work until I try to record video, it just refuses to record. Then I tired to use btmono but that did the same. Any ideas? I'm using my phone as a camera for a blog.
I switched from the Apple TV2 that I loved so much but started to crash a lot with Kodi.
Loving the FireTV, but was going insane trying to get my airplay setup working. I use airfoil from my mac to stream spotify to 3 airplay zones. With all the FireTV apps I downloaded, there was some latency issues that would be off during every connect and reconnect. Adjusting the settings didn't matter as it would be off again the next connect.
Tried Kodi's Airplay support, and not all that bad, though no volume (didn't know when I bought it that FireTV can't adjust internal audio), and no album artwork on the screen.
Thought about it for a few days and remembered that Airfoil has a speakers app for Android phones to turn it into an Airfoil receiver. I side loaded the app and Viola, all zones play simultaneously and album art on the screen. Tried the volume up and down on my mac (master volume) and low and behold it adjusts the volume on the FireTV. So happy that I have all the functionality of my AppleTV in a much more dynamic and faster device. Thought I would post this in case it helps someone else out as I have seen a few people ask about this in other forums, but haven't come across this solution.
grinny11 said:
I switched from the Apple TV2 that I loved so much but started to crash a lot with Kodi.
Loving the FireTV, but was going insane trying to get my airplay setup working. I use airfoil from my mac to stream spotify to 3 airplay zones. With all the FireTV apps I downloaded, there was some latency issues that would be off during every connect and reconnect. Adjusting the settings didn't matter as it would be off again the next connect.
Tried Kodi's Airplay support, and not all that bad, though no volume (didn't know when I bought it that FireTV can't adjust internal audio), and no album artwork on the screen.
Thought about it for a few days and remembered that Airfoil has a speakers app for Android phones to turn it into an Airfoil receiver. I side loaded the app and Viola, all zones play simultaneously and album art on the screen. Tried the volume up and down on my mac (master volume) and low and behold it adjusts the volume on the FireTV. So happy that I have all the functionality of my AppleTV in a much more dynamic and faster device. Thought I would post this in case it helps someone else out as I have seen a few people ask about this in other forums, but haven't come across this solution.
Click to expand...
Click to collapse
This is why I love XDA, splendid.
Hi there,
Is this solution still working on your side? I tried the same last night and side loaded Airfoil speakers app. This is the first time I sideloaded anything. It is perfectly in sync with my other devices as long as I use my system audio from my PC. But when I try to use Spotify as source the app on the AFTS crashes. Do I need to have other apps services installed on my fire tv stick for this to work? What versions are you using?
I use apple music on my Macbook and it works fine. I use the latest version apk from the android play store.
Hi all,
I have a Nvidia shield TV with built in chromecast which works perfectly.
I could always cast directly with YouTube or whatever or use googles home app for mirroring video and audio when I wanted something that does not have build in cast option.
This has always worked with my opo1, opo3t, opo5 and my wife's Samsung s10.
Now with my rm5g I can cast when there is a cast option in the app flawlessly.
But the issue I have is when I try to cast/mirror with Google home.
Some how when I start mirroring everything works BUT sound keeps also coming from my mobile as well. If I lower volume or silence on mobile, it silences it on my shield as well.
The sound should be handled on my shield only and not on both devices, since now I need to have 100% volume on phone and duplicated sound on TV..... That's not what I want and it never needed this.
Normally you only have the mirrored video/chrome/etc in screen but no audio on your phone.
Is there a setting I'm missing on my red magic 5g? Or is this a flaw in the phone/software?
Does it work with you guys? For example mirroring a video on Chrome with Google home mirror function.
(ps, I have already looked in the home app, my shield TV and my phone but I can't find a solution to have the audio only on my shield. / I have not touched any settings when I changed my mobile from one plus 5 to red magic 5g / it still works perfectly on my opo5 and my wife's Samsung)
Nobody has this issue or have tried if it worked?
Just to add on the above info, reboot, factory reset was not helping.
I noticed the same issue with my Red Magic 5G, but unfortunately I don't know how to fix it. I think this is something only Nubia can fix.
Cast tru my 2 google nests and Hub are fine. Weird bug.
iPeck said:
Cast tru my 2 google nests and Hub are fine. Weird bug.
Click to expand...
Click to collapse
So your Google nest works fine, you don't have "double" audio then?
Kinda weird.
During the last days I've tried casting with my chromecast receiver on my other TV, a TV in my office and at a friend's place. Same result btw.
So it's not in the hardware of chromecast or Nvidia shield. It has to be in the red magic.
No double audio on my 3 devices. ??
I do have doubles displayed in the device cast menu but it doesnt affect anything.
I would like to bump this again to see if anyone else have this problem and a possible fix?
In the mean time my red magic had a software update, Google home updated a few times, my Nvidia shield had a software update.
I kinda hoped that 1 of these would fix it but I am still left with double audio. Right now my only solution is to cast what I want with audio on the phone and put my phone in the kitchen with the door closed so I won't be bothered by the double audio.
It's not really convenient....
Could anyone assist me?
Ps, tried a full reset on my 5g,no luck either.
Hi everyone,
I don't know if it's a coincidence but since my Honor View 20 PCT-L29 was upgraded to build 11.0.0.137 (C432E3R2P3) I can no longer view DRM Widevine-protected video streams via Kodi in desktop mode.
I don't think it's a Kodi's problem, because Netflix, Disney+ etc. work perfectly when the smartphone isn't connected to the external screen. I also don't think it's an HDMI cable problem, because everything worked great before the update.
Am I the only one who finds this problem? Can it affect the fact that I disabled HMS? However they were disabled before the last update and - as I said - everything worked fine before magic UI 4.0 arrived.
Oddly enough, I can see widevine-protected content without any problems on the external screen, if I use simple mirroring rather than desktop mode (audio is muted, but I can still hear it if I plug in a pair of headphones or an external speaker to the smartphone).
Very strange indeed, don't you think?