Hey guys,
was anybody of you able to install ViPER4Android on HTC 10 7.0 Nougat?
There is an official Nougat version released, the apk run's perfectly, nonetheless the app everytime returns that the audio drivers need to be updated/installed. After pressing "yes", my phone tells me the audio drivers were installed and I need to reboot the phone.
After the reboot the same message that there is the need to install the sound drivers?! Tried it a few times now.
And yes, my phone is rooted.
... and would you say it would make a difference to install ViPER4Android even if the Boomsound of the HTC 10 is already pretty nice?!
Thanks guys....
Hi,
It is necessary the version 2.5.0.5 and in Zip, not in Apk!
Diverse file are needed to work.
It is integrated into my Rom Pyrana NO7-0.8 with Dolby.
@+
In my honest opinion, A.R.I.S.E can do the same as what Viper4Android can do except it actually has huge device support.
I used to use it but I now don't need it due to an upgrade of the speakers I was connecting it to, works almost identically and can sometimes fix the secondary speaker that doesnt work on some ROMs. nothing third-party seems to be better optimized for boomsound though, the standard is usually the nicest sounding.
So recently @guitardedhero release and version of Dolby atmos for android Pie and i was excite about it but it only for for android pie only,so i try downgrade back to 9.0.17 but apparently the mod cause the phone go straight to crashdump mode and like hour ago he release couple more version but i was already on android 10 but after messing around with flash script i was able flash it on OOS10 imma attach the file i mod here for specific only for OOS10 only since this the only version that work flawless on OOS10 other test version i try they either force close the app or audio loss, highly recommended flash it along with Ainur Narsil---haven't test with other mod yet but in my opinion Dolby itself already better
https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
UPDATE: latest dolby re-port by reiryuki fixes full brightness issue working on (maybe)all custom rom available now for Oneplus 6t and maybe other device has FOD custom rom ! please head to his github repo link below for the download!
Download
Credit:
@guitardedhero (for The Port)
-Me (for testing and mod the file to work on OOS10)
-Reiryuki for the fix and new port
-Dolby (for Dolby Atmos)
_BГ@ckθut said:
So recently @guitardedhero release and version of Dolby atmos for android Pie and i was excite about it but it only for for android pie only,so i try downgrade back to 9.0.17 but apparently the mod cause the phone go straight to crashdump mode and like hour ago he release couple more version but i was already on android 10 but after messing around with flash script i was able flash it on OOS10 imma attach the file i mod here for specific only for OOS10 only since this the only version that work flawless on OOS10 other test version i try they either force close the app or audio loss, highly recommended flash it along with Ainur Narsil---haven't test with other mod yet but in my opinion Dolby itself already better
https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
Credit:
@guitardedhero (for The Port)
-Me (for testing and mod the file to work on OOS10)
-Dolby (for Dolby Atmos)
Click to expand...
Click to collapse
Can u help me why it would not open and crashing. I'm on iOS 10.3.0
tswb said:
Can u help me why it would not open and crashing. I'm on iOS 10.3.0
Click to expand...
Click to collapse
You had any sound mod install? And what magisk version you had?
I have install the Dolby atoms only and no audio mod. Latest magisk 20.3 and I try to set the storage it won't open the permission.how to get granted permission to the storage.
tswb said:
I have install the Dolby atoms only and no audio mod. Latest magisk 20.3 and I try to set the storage it won't open the permission.how to get granted permission to the storage.
Click to expand...
Click to collapse
Like dolby ask you to granted storage permission or magisk? Cause dolby not require to Grant any permission as far as i know!there is couple people has successful installed it without any issue so far
tswb said:
I have install the Dolby atoms only and no audio mod. Latest magisk 20.3 and I try to set the storage it won't open the permission.how to get granted permission to the storage.
Click to expand...
Click to collapse
Use Magisk 20.1 try it and test if works then update to Magisk 20.3 done
Mervingio said:
Use Magisk 20.1 try it and test if works then update to Magisk 20.3 done
Click to expand...
Click to collapse
OK I will try it. Thanks
it works this is the good news, the bad news is that my bluetooth then stops working, it can no longer be switched on
tswb said:
OK I will try it. Thanks
Click to expand...
Click to collapse
did you find a chance to try it ?
i wonder we loose modules or not after we downgrade to 20.1 ?
also dolby still works when we upgrade back to 20.3 ?
Can it work simultaneously with Dolby digital plus?
Also do I need to install anything (AML)?
lazye53 said:
Can it work simultaneously with Dolby digital plus?
Also do I need to install anything (AML)?
Click to expand...
Click to collapse
Give it a try! Haven't has time to test yet but i guess it should work!
the_poseidon said:
did you find a chance to try it ?
i wonder we loose modules or not after we downgrade to 20.1 ?
also dolby still works when we upgrade back to 20.3 ?
Click to expand...
Click to collapse
I got working on 20.1 but i notice the Bluetooth not working after I install the zip file.
tswb said:
I got working on 20.1 but i notice the Bluetooth not working after I install the zip file.
Click to expand...
Click to collapse
If you remove module Bluetooth is not longer working
Well guy there is a news testing zip... currently at work now but ill test it after work and let you guy know! I still using the same zip and don't has any problem with Bluetooth or anything but ill update the new zip here a little bit!
https://forum.xda-developers.com/an...-atmos-axon-7-oreo-port-t3740508/post81515331
I was reading through a lot of that thread and it looks like it's still based for pie and there was a section in there saying that you have to change your build prop setting to SDK level 28 if you are on oxygen 10 and Android 10 you'll be SDK 29 so I was getting force closes and I took a big risk when do the build prop edited my SDK level 228 and went straight into a bootloop. So I had to actually do a factory reset. I then restore from twrp, but I screwed up and restored everything what I should have just done a system and data restore only because then I did a soft brick and had to use the MSM tool and start all over again at Android 9! Lol.. so I know guitardedhero was making special media files for audio library they were . so extensions... I'm going to keep digging because on Android 10 I've got ice sound working which is an Asus driver and I can even change the four configurations as well as the 11 different sound profiles fall through terminal emulator. I also have a flashable DTS 2.0
groovemetal81 said:
I was reading through a lot of that thread and it looks like it's still based for pie and there was a section in there saying that you have to change your build prop setting to SDK level 28 if you are on oxygen 10 and Android 10 you'll be SDK 29 so I was getting force closes and I took a big risk when do the build prop edited my SDK level 228 and went straight into a bootloop. So I had to actually do a factory reset. I then restore from twrp, but I screwed up and restored everything what I should have just done a system and data restore only because then I did a soft brick and had to use the MSM tool and start all over again at Android 9! Lol.. so I know guitardedhero was making special media files for audio library they were . so extensions... I'm going to keep digging because on Android 10 I've got ice sound working which is an Asus driver and I can even change the four configurations as well as the 11 different sound profiles fall through terminal emulator. I also have a flashable DTS 2.0
Click to expand...
Click to collapse
Yeah that what im concerned about to change the builprop SDK to 28 instead of that i change a code on the zip so it bypass the SDK check to able it flash on SDK 29....it was a test but apparently i didn't has any problem about a Bluetooth or anything! And there is couple people successful flash it as well but imma caught up with lastest zip and lemme see if i could mod it to work on OOS 10!and yep by default it only support Android pie only! So imma try troubleshooting as much as possible before releasing it!
Updated to latest Dolby Atmos 0.727 zip and it attached on the first page... I'll leave 0.64 zip there just in case anyone need it! And once 727 zip it work without any problem on 10.3.0 for me at least (testing on AAC,LDAC even aptx HD) but let me know
groovemetal81 said:
I was reading through a lot of that thread and it looks like it's still based for pie and there was a section in there saying that you have to change your build prop setting to SDK level 28 if you are on oxygen 10 and Android 10 you'll be SDK 29 so I was getting force closes and I took a big risk when do the build prop edited my SDK level 228 and went straight into a bootloop. So I had to actually do a factory reset. I then restore from twrp, but I screwed up and restored everything what I should have just done a system and data restore only because then I did a soft brick and had to use the MSM tool and start all over again at Android 9! Lol.. so I know guitardedhero was making special media files for audio library they were . so extensions... I'm going to keep digging because on Android 10 I've got ice sound working which is an Asus driver and I can even change the four configurations as well as the 11 different sound profiles fall through terminal emulator. I also have a flashable DTS 2.0
Click to expand...
Click to collapse
I would like to personally apologise to you for posting information that caused much frustration and inconvenience for you.
That was irresponsible of me to state workarounds to circumvent a restriction I implemented without knowing the risks that could be involved and not just taking out the restriction myself.
Thank you for sharing your experience. If I had not seen it just now, I would have still assumed such an action you took to be harmless.
I did remove this restriction many versions ago after learning that many were having success on Android 10 and the latest zip a couple hours ago seems to provide a much higher success rating and the support for existing audio mods and their effects seems to now be in place if you ever get an itch to try again without needing to do any hacky, ill-advised stuff like what I said last week.
:good:
My Bluetooth stops working after flashing. Reflash of OOS was necessary to get it back.
Guys in my device android 10 I installed viper4android and it's working without installing any driver any magisk module or root permission , how is that possible ? ? I just installed the apk from XDA and opened it , it started processing audio and showing that driver installed.
shivang_bagh said:
Guys in my device android 10 I installed viper4android and it's working without installing any driver any magisk module or root permission , how is that possible ? ? I just installed the apk from XDA and opened it , it started processing audio and showing that driver installed.
Click to expand...
Click to collapse
magic bro.
its happened sometimes in life.
Jai hind
Well I've been trying hardly to get the regular magisk viper4android to work, didn't work.
Seems y'all need to use the legacy version from the magisk installer to get it to work until the devs are solving the problem.
It's because of the separation of USB I guess.
If someone needs further assistance or advices feel free to comment!
I don't have my phone yet but last I heard magisk was not the way to get a working v4a for anyone. the last working version I had came from an apk install of version 2.7.1.0
[APP][ALL ROOT SOLUTIONS][6.0+]ViPER4Android FX 2.7
ViPER4Android FX By pittvandewitt and MrWhite214 Introduction Many users are enhancing their smartphone audio experience with the popular ViPER4Android software, but some of us have a hard time installing the driver or they don't like the look...
forum.xda-developers.com
I have made it work using audio modification library and audio compatibility patch
anyone with it working on enforcing 3.1 please share which version/s you used, steps required etc
@NoxOn3 @proyectos3d
Hello everyone
has anyone managed to install viper FX on oneplus 9pro?
i tried any solution but it doesn't install drivers..
isoladisegnata said:
Hello everyone
has anyone managed to install viper FX on oneplus 9pro?
i tried any solution but it doesn't install drivers..
Click to expand...
Click to collapse
Yes, on Android eleven there have been a couple reported storys of success. I personally installed the JamesDSP module, and then Android modification library module, and then viper, and all has been well.
Install JamesDsp.
Install AML.
Reboot.
Install SElinux permissive.
Reboot.
Install ViperFX.
Reboot.
Install driver.
Reboot.
Ok.
Now you can uninstall Selinux.
Samuel Holland said:
Yes, on Android eleven there have been a couple reported storys of success. I personally installed the JamesDSP module, and then Android modification library module, and then viper, and all has been well.
Click to expand...
Click to collapse
Tnk alot I have solved with James DSP and I have replaced "post-fs-data.sh in data/adb/modulo viper