Related
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
mitch1490 said:
hi to everyone,
I have a htc desire 320 and I rooted it then flash a not compatible recovery moded and got in bootloop.
after this said the cellphone keeps restarting so I cant use the adb fastboot because its always disconnecting from computer.
I have no recovery to restore from my backup.
I have no OS to boot on.
I never had a bootloader locked or unlocked. none.
I have connecting problem to computer as adb should help.
my brain hurts and my phone is dead I think.
what should I do to just put on a recovery or unlock a bootloader I never had to bring everything back to normal ?
thanks in advance for support,
have a nice day.
Click to expand...
Click to collapse
Sorry this is for the desire.
Saf98 said:
Sorry this is for the desire.
Click to expand...
Click to collapse
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Help
mitch1490 said:
Whats the real codename of the desire 320 is it still like bravo
I finally had pass the problem with flashing it and facing error from the CID
supercid on this model is possible?
Click to expand...
Click to collapse
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Avan7 said:
Hello!
I also flashed a recovery.img which put the phone into a boot loop. I am not able to flash my backup because in SP Flash Tool my HTC Desire 320 keeps disconnecting (error 2004).
How did you manage to flash your phone? Could you please help? Or is my phone dead?
Thanks.
Click to expand...
Click to collapse
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
Thanks a lot! I am going to give it a try .
Blessings.
mitch1490 said:
dear Avan7,
I managed to flash it by doing checksum checked and usb high speed without battery inside press the volume down hold it and plug <-- important in the computer the usb cable...
you click download first then press button and plug the process will begin in SP flash tool my friend have a nice day....
PS: use the HTC_Desire_320_V01_U_K44_SENSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
its the rom I used and working perfectly moded from stock.
happy Christmas since im noel and have a nice day.
~no more errors peace
Click to expand...
Click to collapse
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
n3m37h said:
I have Tried plugging mine in holding down the down button and still just kept disconnecting and reconnecting. Is there any other way you know of to flash back to stock? or installing cwm/twrp?
I have even tried on multiple computers...
Click to expand...
Click to collapse
please try removing the battery first.
mitch1490 said:
please try removing the battery first.
Click to expand...
Click to collapse
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
n3m37h said:
Already tried, with battery in it boots and crashes, when plugged in without battery it just connects and disconnects over and over.
Have tried multiple cords, usb 2.0 & 3.0 ports. Same story.
Installed mediatek driver, uninstalled; you name it I tried it with the exception of opening it. Haven't got to that stage yet, I'm lazy.
Click to expand...
Click to collapse
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
This is a forum for the HTC Desire Bravo A8181.
This is a forum for the HTC Desire Bravo A8181.
See with your own eyes.
Help please
mitch1490 said:
if adb cant be able to be able to connect and stay connected ( bootloop or restarting problems )
then take SP Tool flasher to flash the Scatter MT6582 from stock KK by only remove battery first and let it out.
plug the universal usb port on cable but on the end of the cellphone dont plug it yet...
in SP Tool check the checkboxe in settings to checksum DL DA. and select usb high speed and W/O battery options.
then when the scatter is loaded then you ready to flash. the latest SF Tool is recommanded.
click on Download on SP tool when done the steps. it will hang on idle but at this moment press de volume down button first.
keeps holding that button until the end of flashing process and when hold it now plug the cable to your computer and bam you will be able to flash it to stock or custom your desire 320 without problems and its will not disconnect during process since you holding the volume down button.
that's how I did resolve my problem about months and find my own solution.
hope this helps... dont be shy to let me know if it worked for you or if you still need assitance.
have a nice day.
peace.
Click to expand...
Click to collapse
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Metal Addict said:
After searching and searching, seems someone actually had the same problem as I do. But for my part even when pressing the volume down before connecting to the computer doesn't keep the phone from connecting and disconnecting, even tried all the buttons combination you can imagine.
I'm wondering if it could be a driver issue, in your case was your device disconnecting every 5 seconds? And do you have any special driver that I should be aware of, personally I have Preloader USB VCOM port version 2.0.0.0...
I hope you got something in mind, I don't know where to look anymore haha.
Thanks again
PS I did everything else, remove battery, disable signature, got scatter MT6582 + download agent for flash tool (also updated), tried with ADB but can't detect device (of course it keeps deconnecting :silly: )
Click to expand...
Click to collapse
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
mitch1490 said:
even if you have mediatek usb vcom driver or adb drivers else original driver it works on all with the button press.
but set the setting like I said USB support normal without battery W/O and high speed.
don't set it to mediatek com ports on SP tool. but if you have mediatek com port change to port 20. that's what I did change the port com.
Click to expand...
Click to collapse
What version of SP Flashtool are you using?
Well I have tried everything everyone has said so far
No matter what I try I get
BROM ERROR: S_BROM_DOWNLOAD_DA_FAIL (2004)
[H/W] Fail to download DA to baseband chip's internal SRAM!
Have tried using both
SP_Flash_Tool_v5.1352.01
SP-Flash-Tool-v5.1532.00
Both do the exact same thing, tried checking the AD DL ALL with Checksum boxes, unchecked usb high speed and full speed. Pressing the down button before plugging it it, after. Nothing I do seems to work, in the device manager it just keeps appearing and disappearing over and over
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (http://mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : http://easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: http://4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Hi
I have desire 200 won't turn on,stay in HTC logo
I just have recovery and fastboot with hboot 1.20.0000,,,s-on
I want to flash any ROM on it
Any one help me,please?
Sent from my V3 Plus using Tapatalk
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
The correct version of the SP FlashTool we need for our device is the SP_Flash_Tool_v5.1348.01_SEC (mediafire.com/download/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar). I read somewhere that it was because of the HTC Desire 320 has a security boot.
If you got a 4008 error, it's probably because you're using Win8-Win10. You need Win7. I'm installing Win7 on my PC right now, so I will tell you more about it later.
If you looking for the stock roms, I found this site : easy-firmware.com/index.php?a=browse&b=category&id=1449
If you speak russian, feel free to correct me.
Have a good one guys.
Source: 4pda.ru/forum/index.php?showtopic=331715&st=12120#entry40719887 (Russian)
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
You my friend are a gentleman and a scholar! downloaded and flashed right away and booted up Am on Win 7 x64 Pro
cafestrabac said:
I think a found the solution guys. After a sleepless night , I stumble into a russian forum who got the same problems as ours.
EDIT: Alright guys, confirmed working with 0PF1IMG_V01_U_K44_SENSE52_Telus_1.02.661.2_Radio_MOLY_WR8_W1315_MD_WG_MP_V42_F1_P9_release on Windows 7 x64. Model: OPF1100
If you got a CID Error, it's probably because you have flash the wrong rom for your device. I didn't have to restore the NVRAM after this flash, but maybe you will have to.
Click to expand...
Click to collapse
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Leoisback said:
Thanks for it, i've got that problem after trying to install custom recovery. I also got the error 2004 but i fixed myself by using DA_SWSEC.bin. Not sure if it work for ur guys or not.
I also learn that althrough HTC 320 is Mt6582 devices but we cant use the method they wrote in mtkrom site to install custom recovery. Now i can find the stock rom of my phone to check flashing custom rom via splashtool. I used telus rom above and i got problem wrong CID and the flash camera not work, if i have msg or phone call missing, it flashes like notice led! At least now my phone is working ok then. I'll try to contact HTC to get stock rom of my phone
Click to expand...
Click to collapse
Yeah I forgot to mention that, you need to use the DA_SWSEC on the SP Flashtool. What's your htc 320 model? Your probably have the wrong rom. The telus one is only for NA device.
EDIT: Are you using the HTC Desire 320 with dual sim: http://drop.ndtv.com/TECH/product_database/images/15201573649PM_635_htc_desire_320.jpeg
If this is your device, the Telus rom is not for your device.
This is the EU rom: http://www.mediafire.com/download/z...NSE53_htc_europe_1.00.401.3_by_jamesjerss.zip
Hello guys,
After an update to android 7.0 my cell phone started to show difficulties to load. When I connect it on it gives the following message: Caution: High temperature of the device.
This happened after I updated the firmware to the latest version. I wonder if it is to restore the system and go back to version 6.0 of android?
Thank you all,
Best regards
Lando
I have a feeling you'd need to unlock the bootloader. Even so it may not allow you to install MMon it...
Usually the newer firmware replaces the bootloader that rejects older versions of the OS to be flashed.
Help
ultramag69 said:
I have a feeling you'd need to unlock the bootloader. Even so it may not allow you to install MMon it...
Usually the newer firmware replaces the bootloader that rejects older versions of the OS to be flashed.
Click to expand...
Click to collapse
Yes, actually I already unlocked but it did not work. When I try to flash the ROM it says that the version is impractical with the CPU. And nothing truth is not because I've tried more than 5 old roms.
Please if anyone knows how I do this downgrade help me, because I have to have to try several times to load the phone with it turned off.
Many thanks to any help!
landognr said:
Yes, actually I already unlocked but it did not work. When I try to flash the ROM it says that the version is impractical with the CPU. And nothing truth is not because I've tried more than 5 old roms.
Please if anyone knows how I do this downgrade help me, because I have to have to try several times to load the phone with it turned off.
Many thanks to any help!
Click to expand...
Click to collapse
Boot latest twrp
wipe everything on phone in twrp (tick all boxes)
Flash the correct (2.4ghz or 2.15ghz) android 6.0 rom from the asus website. You will need to transfer the zip file to your phone from computer while in recovery. Sometimes you have to reboot twrp after wiping to see the storage on your computer.
Be careful as wiping you phone will remove the os and will result in soft brick if u don't flash the android 6.0 rom.
I have reverted to android 6.0 twice on the sd821 variant but still only do this if you are confident.
I am not responsible if you brick your phone
Brick
Huffy1 said:
Boot latest twrp
wipe everything on phone in twrp (tick all boxes)
Flash the correct (2.4ghz or 2.15ghz) android 6.0 rom from the asus website. You will need to transfer the zip file to your phone from computer while in recovery. Sometimes you have to reboot twrp after wiping to see the storage on your computer.
Be careful as wiping you phone will remove the os and will result in soft brick if u don't flash the android 6.0 rom.
I have reverted to android 6.0 twice on the sd821 variant but still only do this if you are confident.
I am not responsible if you brick your phone
Click to expand...
Click to collapse
Hello friend,
Unfortunately at the time of doing the procedure by an oversight on my part I forgot to do the full wipe. I circled the correct ROM for my phone, but did not do the wipe.
The phone rebooted, hung up and did not call anymore. I can not believe it looks like it gave soft brick due to this my carelessness.
It does not go into fasboot or recovery mode. It gets totally off and when I connect to the pc it recognizes as Qualcomm hs-usb qdloader 9008.
I'm desperate, have I lost my phone? Is there any way to fix this friend? Please ask if anyone knows any procedure to correct it.
Thank you from the heart.
=(
landognr said:
Hello friend,
Unfortunately at the time of doing the procedure by an oversight on my part I forgot to do the full wipe. I circled the correct ROM for my phone, but did not do the wipe.
The phone rebooted, hung up and did not call anymore. I can not believe it looks like it gave soft brick due to this my carelessness.
It does not go into fasboot or recovery mode. It gets totally off and when I connect to the pc it recognizes as Qualcomm hs-usb qdloader 9008.
I'm desperate, have I lost my phone? Is there any way to fix this friend? Please ask if anyone knows any procedure to correct it.
Thank you from the heart.
=(
Click to expand...
Click to collapse
Hi sorry I'm having trouble understanding what your stuck at. You saying the phone doesn't boot at all?
Huffy1 said:
Hi sorry I'm having trouble understanding what your stuck at. You saying the phone doesn't boot at all?
Click to expand...
Click to collapse
Exactly! My phone doesn't boot, just recognizes how QUalcomm HS-USB QDLoader 9008 in my PC. He's dont boot or fastboot mode and dont recovery. Could you help me please?
landognr said:
Exactly! My phone doesn't boot, just recognizes how QUalcomm HS-USB QDLoader 9008 in my PC. He's dont boot or fastboot mode and dont recovery. Could you help me please?
Click to expand...
Click to collapse
Ok restoring your phone with the Qualcomm loader is a very lengthy and complicated process. When the phone is completely off. Hold down the volume up button and power button for a while until the Asus logo appears on the screen. Then open cmd in your android-sdk folder and type "fastboot devices." Let me know if it detects the phone
Huffy1 said:
Ok restoring your phone with the Qualcomm loader is a very lengthy and complicated process. When the phone is completely off. Hold down the volume up button and power button for a while until the Asus logo appears on the screen. Then open cmd in your android-sdk folder and type "fastboot devices." Let me know if it detects the phone
Click to expand...
Click to collapse
Hello friend,
Unfortunately this procedure dont work, my device dont turn on. With power + vol up or power + vol down or both at the same time dont work, because he gives no sign of life. All I can do is connect the PC and recognize how Qualcomm hs-usb qdloader 9008 in device manager. You know others procedure to do?? Thank you
landognr said:
Hello friend,
Unfortunately this procedure dont work, my device dont turn on. With power + vol up or power + vol down or both at the same time dont work, because he gives no sign of life. All I can do is connect the PC and recognize how Qualcomm hs-usb qdloader 9008 in device manager. You know others procedure to do?? Thank you
Click to expand...
Click to collapse
What phone version do u have? S821 or s820?
Huffy1 said:
What phone version do u have? S821 or s820?
Click to expand...
Click to collapse
I think s820, my phone is CPU 2.15GHz version. Thank your repply
landognr said:
I think s820, my phone is CPU 2.15GHz version. Thank your repply
Click to expand...
Click to collapse
Ok well unfortunately my phone is s821. You need someone here that has a s820 to factory reset then backup their phone. Then you can use the Qualcomm loader to restore your phone.
Huffy1 said:
Ok well unfortunately my phone is s821. You need someone here that has a s820 to factory reset then backup their phone. Then you can use the Qualcomm loader to restore your phone.
Click to expand...
Click to collapse
Ok man, but where can i find files to do a factory reset?
im searching in.web but i cant find. Please bro help me, i dont know what do. You are my last hope to solve this, thanks
landognr said:
Ok man, but where can i find files to do a factory reset?
im searching in.web but i cant find. Please bro help me, i dont know what do. You are my last hope to solve this, thanks
Click to expand...
Click to collapse
Like I said as this is such an uncommon phone it probably doesn't exist. You need someone willing to upload a backup of their phone 2.15ghz for u to restore.
Huffy1 said:
Like I said as this is such an uncommon phone it probably doesn't exist. You need someone willing to upload a backup of their phone 2.15ghz for u to restore.
Click to expand...
Click to collapse
Ok Man, but can you send me the step by step of how you managed to solve your problem, regardless of whether rom is different? I know you have nothing to do with it, but I have spent all my savings on this device and need to work out a way to recover it.
Thanks Huffy :good:
landognr said:
Hello guys,
After an update to android 7.0 my cell phone started to show difficulties to load. When I connect it on it gives the following message: Caution: High temperature of the device.
This happened after I updated the firmware to the latest version. I wonder if it is to restore the system and go back to version 6.0 of android?
Thank you all,
Best regards
Lando
Click to expand...
Click to collapse
Did you success?Have you unlock the bootloader of your phone?unlock is necessary!(even though somebody say it work on locked phone)
Here come the tip from Taiwan forum~
link
samson1357924 said:
Did you success?Have you unlock the bootloader of your phone?unlock is necessary!(even though somebody say it work on locked phone)
Here come the tip from Taiwan forum~
link
Click to expand...
Click to collapse
Yes, The bootloader was already unlocked before the problem happened on my phone. I dont think you really understood my problem. What I need is to recover the bootloader from my device.
You said: wonder if it is to restore the system and go back to version 6.0 of android?
So I give you the way to downgrade~It’s not difficult.
I don't know that you had brick your phone......
samson1357924 said:
You said: wonder if it is to restore the system and go back to version 6.0 of android?
So I give you the way to downgrade~It’s not difficult.
I don't know that you had brick your phone......
Click to expand...
Click to collapse
Will QuickCharge 3.0 work again if you return to Android 6 (given that it was removed in Android 7)?
AWT86 said:
Will QuickCharge 3.0 work again if you return to Android 6 (given that it was removed in Android 7)?
Click to expand...
Click to collapse
It was never removed it works fine on Android 7.0. Sometimes you have to factory reset your phone to get it working after an upgrade.
You do have to use the supplied ASUS charger though which is really annoying to get qc3.0 speeds. Other qc certified quick charge 3.0 will only charge at normal speeds. Something Asus have blocked themselves.
Hello,
I tried to flash my phone from global 8.0.3.0 stable to 8.2.4.0MAGCNDL China Stable. Miflash said flashing was successfull, but then I started my phone and was on a bootloop.
I cannot access edl mode via deep flash cable anymore, it´s just loading. My phone isn´t unlocked that´s why i can´t flash over fastboot. I already tried to the recover mode and downloaded a chinese version of Mi Pc Suite. It detects my device but when I try to recover it switches for like 3 secs to the right screen but then immediately switchs back to the first screen (connect device).
One thing i´ve noticed is there is an option to choose a xiaomi ota file, what is that, because I can´t find anything.
Is there any hope for my phone?
Not good, you shouldent even try to flash china stable(you can but why). so, i think you should enter EDL with testpoints, or you can try do hard reset, maybe this will work.
use this method and then flash your mi5s with stable global.
http://en.miui.com/thread-310325-1-1.html
Download Mi PC suite china version then enter recovery mode and connect the phone to pc,let it make the update and your done.
mezutelni said:
Not good, you shouldent even try to flash china stable(you can but why). so, i think you should enter EDL with testpoints, or you can try do hard reset, maybe this will work.
Click to expand...
Click to collapse
Thanks for your reply, how can I hard reset my device? And I watched a yt video for tespoints , is it the same procedure as with the mi5 ?
hzare2611 said:
use this method and then flash your mi5s with stable global.
Click to expand...
Click to collapse
I got a Edl cable, but I can´t get into edl.
XMoDuLeSx said:
Download Mi PC suite china version then enter recovery mode and connect the phone to pc,let it make the update and your done.
Click to expand...
Click to collapse
Not working, it just stops immediatly the process, if I press recover
Then u need to connect the phone via USB 2 not 3 and install the correct driver's. The phone must be detected Android adb interface
XMoDuLeSx said:
Then u need to connect the phone via USB 2 not 3 and install the correct driver's. The phone must be detected Android adb interface
Click to expand...
Click to collapse
I´ve installed all drivers and it´s connected to a usb 2 port. Phone is in Device Manager under "Kedacom USB Device/Android ADB Interface"
if you cannat connect the phone as edl,you should give it to mobile repaire center and they fix it with boot boxes for you.
Thanks for all your help guys, I finally recovered my phone and I´m on Lineage OS now.
Well, i'm kinda scared because i already installed a lot of custom rom's and everything works fine every time. Yesterday i installed the MIUI 12 Beta chinese version and after i saw that have one global beta version so i download the global one, installed the pre loader to prevent the bricked device and installed the twrp recovery to install the global rom. I wiped everything as always, installed the rom and reboot the phone... Now he doesnt show nothing, just died, he doesn't stuck at boot loader, if i connect him to the power the charging led turns on, he vibrate if i click at the power button but no image at all, nothing...
I tryed to connect to pc and turn it on at fastboot thinking that the ldc pannel was burned but no, the pc iddentifies a divice and 1 sec after he just unplug itself...
Can someone help me?
jhrolife said:
Well, i'm kinda scared because i already installed a lot of custom rom's and everything works fine every time. Yesterday i installed the MIUI 12 Beta chinese version and after i saw that have one global beta version so i download the global one, installed the pre loader to prevent the bricked device and installed the twrp recovery to install the global rom. I wiped everything as always, installed the rom and reboot the phone... Now he doesnt show nothing, just died, he doesn't stuck at boot loader, if i connect him to the power the charging led turns on, he vibrate if i click at the power button but no image at all, nothing...
I tryed to connect to pc and turn it on at fastboot thinking that the ldc pannel was burned but no, the pc iddentifies a divice and 1 sec after he just unplug itself...
Can someone help me?
Click to expand...
Click to collapse
What device shows up? Can you do a lsusb (if you're under linux or can run a linux distro)? If you press Vol+ does anything happen? Does SPFT work?
Beware some people reported problems using the preloader with Android 10.
MOD EDIT: Content removed
Si, ele vibra pero no aparece nada!
u8ububu said:
What device shows up? Can you do a lsusb (if you're under linux or can run a linux distro)? If you press Vol+ does anything happen? Does SPFT work?
Beware some people reported problems using the preloader with Android 10.
Click to expand...
Click to collapse
Well im not using a linux distro but i can install ubunto if needed!
If i pres vol + or - and power after like 10 sec he vibrates but nothing happens...
What is SPFT ?
follow this guide
https://forum.xda-developers.com/redmi-note-8-pro/help/hardbrick-rn8p-t4064637
and use the files from this for your corresponding device
https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/
please dont flash the indian preloader or the lk files or itll be bricked again, use orange fox recovery for andoid 10 as recovery as to avoid bootloop in using reboot to recovery option. (saving you guys some money and time, had to reflash my phone a couple times before just sticking to miui 12 with custom recovery
jhrolife said:
Well im not using a linux distro but i can install ubunto if needed!
If i pres vol + or - and power after like 10 sec he vibrates but nothing happens...
What is SPFT ?
Click to expand...
Click to collapse
SPFT is Mediatek's flashing tool. It is used when their phones hardbrick. You should read about it now.
If the phone vibrates, you most likely have some preloader flashed, the question is which. You should follow the instructions mentioned in iRayn's post above. If you still got the factory preloader, you're in luck, the guide will definitely work.
If you don't have it, you'll likely need to use an authorized account, but first try getting a ubuntu image (you don't need to install it, just run a live version); there's some useful info that can be gathered from lsusb. Particularly if you see 0e8d:0003 in lsusb's output when pressing Vol+, try again with SPFT while pressing Vol+.
iRayn said:
follow this guide
https://forum.xda-developers.com/redmi-note-8-pro/help/hardbrick-rn8p-t4064637
and use the files from this for your corresponding device
https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/
please dont flash the indian preloader or the lk files or itll be bricked again, use orange fox recovery for andoid 10 as recovery as to avoid bootloop in using reboot to recovery option. (saving you guys some money and time, had to reflash my phone a couple times before just sticking to miui 12 with custom recovery
Click to expand...
Click to collapse
IT WORKS! My RN8P is alive !!! Thanks alot !!!! You really help me out!
jhrolife said:
IT WORKS! My RN8P is alive !!! Thanks alot !!!! You really help me out!
Click to expand...
Click to collapse
good to know, save files and links for future bricks
A desperate owner here, I recently tried to install a custom rom and to my surprise everything went wrong and to try to fix the problem I tried to flash my device through QFIL and now it doesn't get out of that anymore ...
I tried countless different ones but always the same result.
Can someone help me????
Hi, I am new to custom ROMs install , recently got a Poco F3 and When installing I run into a problem, the pc doesnt recognize the device after I run the batch install for the device, when running the console, it gets stuck here (Ill add a picture), its been one hour like this, whta can I do? I am using the lastest version of Pixel Extended.
Also I can no longer get back into normal MIUI so IDK what to do.
Thanks for any help and sorry if this sounds like such a noob mistake but I am really lost right now
Edit:
SOLVED! IDK how, but It was a drivers issue, had to install It and uninstall it multiple times, sometimes the device manager would recognize it but the console script wouldn't, don't know really why it happened but hey I fixed it and managed to install custom ROMs, thanks for the help.
looks like a driver issue when its rebooting fastboot mode,check device manager,might just need to unplug cable and then plug back in to get it working again.
if that doesnt help try a different driver on the pc.
metalspider said:
looks like a driver issue when its rebooting fastboot mode,check device manager,might just need to unplug cable and then plug back in to get it working again.
if that doesnt help try a different driver on the pc.
Click to expand...
Click to collapse
And which kind of driver should I get because in the MIUI unlock app, it says that the latest drivers are installed. Where could I get other drivers?
Bruh124 said:
And which kind of driver should I get because in the MIUI unlock app, it says that the latest drivers are installed. Where could I get other drivers?
Click to expand...
Click to collapse
are u able to boot to recovery? at this step, your phone should boot to recovery, and enter fastboot from there
if able to enter recovery, select advanced > enter fastboot
the installation should continue. dont seem a like a driver issue to me
keyoke87 said:
are u able to boot to recovery? at this step, your phone should boot to recovery, and enter fastboot from there
if able to enter recovery, select advanced > enter fastboot
the installation should continue. dont seem a like a driver issue to me
Click to expand...
Click to collapse
It DID get into recovery mode with the pixel experience logo in it but the script wouldn't move past after waiting for device(one time for like 2 hours)
In the end IDK how, but It was a drivers issue, had to install It and uninstall it multiple times, sometimes the device manager would recognize it but the console script wouldn't even start saying waiting for device , don't know really why it happened but hey I fixed it with that trick and managed to install custom ROMs, thanks for the help!!