Hello,
I tried to flash my phone from global 8.0.3.0 stable to 8.2.4.0MAGCNDL China Stable. Miflash said flashing was successfull, but then I started my phone and was on a bootloop.
I cannot access edl mode via deep flash cable anymore, it´s just loading. My phone isn´t unlocked that´s why i can´t flash over fastboot. I already tried to the recover mode and downloaded a chinese version of Mi Pc Suite. It detects my device but when I try to recover it switches for like 3 secs to the right screen but then immediately switchs back to the first screen (connect device).
One thing i´ve noticed is there is an option to choose a xiaomi ota file, what is that, because I can´t find anything.
Is there any hope for my phone?
Not good, you shouldent even try to flash china stable(you can but why). so, i think you should enter EDL with testpoints, or you can try do hard reset, maybe this will work.
use this method and then flash your mi5s with stable global.
http://en.miui.com/thread-310325-1-1.html
Download Mi PC suite china version then enter recovery mode and connect the phone to pc,let it make the update and your done.
mezutelni said:
Not good, you shouldent even try to flash china stable(you can but why). so, i think you should enter EDL with testpoints, or you can try do hard reset, maybe this will work.
Click to expand...
Click to collapse
Thanks for your reply, how can I hard reset my device? And I watched a yt video for tespoints , is it the same procedure as with the mi5 ?
hzare2611 said:
use this method and then flash your mi5s with stable global.
Click to expand...
Click to collapse
I got a Edl cable, but I can´t get into edl.
XMoDuLeSx said:
Download Mi PC suite china version then enter recovery mode and connect the phone to pc,let it make the update and your done.
Click to expand...
Click to collapse
Not working, it just stops immediatly the process, if I press recover
Then u need to connect the phone via USB 2 not 3 and install the correct driver's. The phone must be detected Android adb interface
XMoDuLeSx said:
Then u need to connect the phone via USB 2 not 3 and install the correct driver's. The phone must be detected Android adb interface
Click to expand...
Click to collapse
I´ve installed all drivers and it´s connected to a usb 2 port. Phone is in Device Manager under "Kedacom USB Device/Android ADB Interface"
if you cannat connect the phone as edl,you should give it to mobile repaire center and they fix it with boot boxes for you.
Thanks for all your help guys, I finally recovered my phone and I´m on Lineage OS now.
Related
So, i unlocked bootloader, tried to install TWRP 3.0.0 by berkantkz but it didn't work, so i used the gottlasz guide, after going to recovery i installed the cm 13 unnofficial rom by pvineeth97, after this the phone just bricked I can enter recovery mode (which is not TWRP) but it doesn't change anything, I can enter download mode, but after entering the usb connects and disconnects, making it impossible to use the LGUP. Is there any hope or I can't recover my phone at all?
Mulukou said:
So, i unlocked bootloader, tried to install TWRP 3.0.0 by berkantkz but it didn't work, so i used the gottlasz guide, after going to recovery i installed the cm 13 unnofficial rom by pvineeth97, after this the phone just bricked I can enter recovery mode (which is not TWRP) but it doesn't change anything, I can enter download mode, but after entering the usb connects and disconnects, making it impossible to use the LGUP. Is there any hope or I can't recover my phone at all?
Click to expand...
Click to collapse
In case the usb connection doesnt stick it means you have exchange mother board... i`ve been in the same shoes bro. Tried everything.. no luck.
Mulukou said:
So, i unlocked bootloader, tried to install TWRP 3.0.0 by berkantkz but it didn't work, so i used the gottlasz guide, after going to recovery i installed the cm 13 unnofficial rom by pvineeth97, after this the phone just bricked I can enter recovery mode (which is not TWRP) but it doesn't change anything, I can enter download mode, but after entering the usb connects and disconnects, making it impossible to use the LGUP. Is there any hope or I can't recover my phone at all?
Click to expand...
Click to collapse
I don't understand what do you mean by "USB" connects and disconnects? What do you see on screen after entering download mode?
pvineeth97 said:
I don't understand what do you mean by "USB" connects and disconnects? What do you see on screen after entering download mode?
Click to expand...
Click to collapse
After entering download mode, windows detects the phone, but after 1 sec it loses connection to the phone, in the K10 appears the normal download mode screen (after a little time, the phone reboots)
Mulukou said:
After entering download mode, windows detects the phone, but after 1 sec it loses connection to the phone, in the K10 appears the normal download mode screen (after a little time, the phone reboots)
Click to expand...
Click to collapse
did you use the original USB cable of k10? try to use LGbridge instead since LGUP doesnt work perfectly with K10 because it so hard to find its DLL file. If you are using LGUP to flash use it with Uppecut Software to bypass its incompatibility issue search it in google and you will find it xda.
ArcherEmiya said:
did you use the original USB cable of k10? try to use LGbridge instead since LGUP doesnt work perfectly with K10 because it so hard to find its DLL file. If you are using LGUP to flash use it with Uppecut Software to bypass its incompatibility issue search it in google and you will find it xda.
Click to expand...
Click to collapse
I used the original cable and tried LGBridge, didn't work.
Mulukou said:
So, i unlocked bootloader, tried to install TWRP 3.0.0 by berkantkz but it didn't work, so i used the gottlasz guide, after going to recovery i installed the cm 13 unnofficial rom by pvineeth97, after this the phone just bricked I can enter recovery mode (which is not TWRP) but it doesn't change anything, I can enter download mode, but after entering the usb connects and disconnects, making it impossible to use the LGUP. Is there any hope or I can't recover my phone at all?
Click to expand...
Click to collapse
First you don't install twrp you just boot it from fastboot.
Other thing is that if you read any post in that thread you would see that everyone who tried to install that rom got their phone bricked, some of them succeeded to bring phone back to life, and some killed their devices for good..
So if you can't have stable connection via usb then I have bad news for you..
Professor Woland said:
First you don't install twrp you just boot it from fastboot.
Other thing is that if you read any post in that thread you would see that everyone who tried to install that rom got their phone bricked, some of them succeeded to bring phone back to life, and some killed their devices for good..
So if you can't have stable connection via usb then I have bad news for you..
Click to expand...
Click to collapse
Yep I knew the risks, just wanted some hope i guess...
Mulukou said:
Yep I knew the risks, just wanted some hope i guess...
Click to expand...
Click to collapse
I don't understand why did'nt you read the forums before flashing it and moreover the ROM was just for testing purposes for advanced developers and it was clearly written at top of the page.
Hi,
My phone got a message about a virus which I assumed was a devious add, it wouldn't go away so I rebooted. It has gone into Mi-Recovery 3.0 and I cant get out. I've tried to connect to PC suite but it won't connect to my laptop
without debugging, which I can't do. I've wiped data but no good. Any ideas?
Flash full rom img via EDL mode and MiFlash software. Check out the official forums how to do it all.
For me the command fastboot oem edl works to get into edl mode.
pr0x2 said:
Flash full rom img via EDL mode and MiFlash software. Check out the official forums how to do it all.
For me the command fastboot oem edl works to get into edl mode.
Click to expand...
Click to collapse
Thank you for answering. I have downloaded a full rom and the MiFlash software. I have made an EDL cable but nothing happens. From what I read it says turn the phone off and connect the modified cable and it will enter EDL mode however it just stays on the Mi-Recovery 3.0 page. I've tried the command line you suggest but that can't find the phone. I've also tried the test point method and still can't get into edl mode. What am I doing wrong?
Sorry, I'm new to this so don't really know what I'm doing. Would you be able to give me some easy to follow advise or some links please.
Multi57 said:
Thank you for answering. I have downloaded a full rom and the MiFlash software. I have made an EDL cable but nothing happens. From what I read it says turn the phone off and connect the modified cable and it will enter EDL mode however it just stays on the Mi-Recovery 3.0 page. I've tried the command line you suggest but that can't find the phone. I've also tried the test point method and still can't get into edl mode. What am I doing wrong?
Sorry, I'm new to this so don't really know what I'm doing. Would you be able to give me some easy to follow advise or some links please.
Click to expand...
Click to collapse
You need your normal USB C cable. When you are in fastboot you need to type "fastboot oem edl" your screen will go to black and you are now in EDL mode. Now flash full img via miflash software.
pr0x2 said:
You need your normal USB C cable. When you are in fastboot you need to type "fastboot oem edl" your screen will go to black and you are now in EDL mode. Now flash full img via miflash software.
Click to expand...
Click to collapse
I cant get to fastboot as I'm stuck in Recovery. My only choices are Reboot to System and Back to Main Menu. When I'm in Main Menu my choices are Reboot, Wipe Data or Connect with MIAssistant.
Multi57 said:
I cant get to fastboot as I'm stuck in Recovery. My only choices are Reboot to System and Back to Main Menu. When I'm in Main Menu my choices are Reboot, Wipe Data or Connect with MIAssistant.
Click to expand...
Click to collapse
When you turn off the phone and press vol down + power what does that do?
It shows the Mi start screen then boots strait into recovery Main Menu. I can't turn the phone off without it rebooting.
Does anyone know how I can get around this? I've run out of things to try.
Did you try reflashing the recovery maybe that fixes it?
Sent from my MI 5s using Tapatalk
Can you explain how I do that? I can't connect to my computer so not sure what you mean. I'm new at this so unsure of the options.
Multi57 said:
Can you explain how I do that? I can't connect to my computer so not sure what you mean. I'm new at this so unsure of the options.
Click to expand...
Click to collapse
Oh hmm never mind. Ignore what I said above. I thought you had TWRP recovery but you've got the stock one.
Sent from my MI 5s using Tapatalk
templeka said:
Oh hmm never mind. Ignore what I said above. I thought you had TWRP recovery but you've got the stock one.
Sent from my MI 5s using Tapatalk
Click to expand...
Click to collapse
Is there no way of getting out of stock recovery?
Maybe your volume rocker buttons are faulty .
Happened with one of my friend his device was only booting into recovery mode on reboot because vol+ button was permanently stuck ?
Try to lift up the button if it is stuck or
press button repeatedly for sometime .
Ashish 289, you are right, it was a faulty volume rocker. Once disconnected it booted. Thanks.
Multi57 said:
Hi,
My phone got a message about a virus which I assumed was a devious add, it wouldn't go away so I rebooted. It has gone into Mi-Recovery 3.0 and I cant get out. I've tried to connect to PC suite but it won't connect to my laptop
without debugging, which I can't do. I've wiped data but no good. Any ideas?
Click to expand...
Click to collapse
now its my turn brother got my mi5 bricked in the same way .
it stays in mi recovery 3.0 always . if you tell me what you did after these steps not working ? could you do anything ?
need a solution man, please help .
thanks in advance.
Hello everyone, I have rooted and used my MI 9 SE for at atbout one month normally. Today, phone discharged and since that time after charged, Iam not able to boot everywhere, except "fastboot screen", while trying anything like (power and +; power and - etc..) phone always vibrates and boots into fastboot screen.
unfortunatelly, I so far I havent managed to connect it to PC and reflash anything, it is not visible and does nothing, when try to connect to PC (tried all USB ports etc).
Also MI flash tool doesnt do anything with that, so, any idea or solution?
Thank you, sorry for my english.
MTAVALI said:
Hello everyone, I have rooted and used my MI 9 SE for at atbout one month normally. Today, phone discharged and since that time after charged, Iam not able to boot everywhere, except "fastboot screen", while trying anything like (power and +; power and - etc..) phone always vibrates and boots into fastboot screen.
unfortunatelly, I so far I havent managed to connect it to PC and reflash anything, it is not visible and does nothing, when try to connect to PC (tried all USB ports etc).
Also MI flash tool doesnt do anything with that, so, any idea or solution?
Thank you, sorry for my english.
Click to expand...
Click to collapse
So you can boot into fastboot but somehow your PC still won't see the phone?
xXPhoenixXx said:
So you can boot into fastboot but somehow your PC still won't see the phone?
Click to expand...
Click to collapse
Yeap
MTAVALI said:
Yeap
Click to expand...
Click to collapse
Are you using USB 2.0 or USB 3.0?
Edit: there is this: https://www.xiaomitool.com/V2/
I used this to unlock my bootloader, though I've noticed that it has "unbrick" feature, whatever that may be, haven't tried it before, see if it helps. If you cannot get fastboot working, you're in deep sh*t.
I'm afraid I can't help beyond this, I never bricked a phone badly enough to ruin fastboot, so at this point I'm clueless what you can do other than returning the phone. They unbrick it for you and the warranty wont be void but you'll have to pay.
xXPhoenixXx said:
Are you using USB 2.0 or USB 3.0?
Edit: there is this: https://www.xiaomitool.com/V2/
I used this to unlock my bootloader, though I've noticed that it has "unbrick" feature, whatever that may be, haven't tried it before, see if it helps. If you cannot get fastboot working, you're in deep sh*t.
I'm afraid I can't help beyond this, I never bricked a phone badly enough to ruin fastboot, so at this point I'm clueless what you can do other than returning the phone. They unbrick it for you and the warranty wont be void but you'll have to pay.
Click to expand...
Click to collapse
OK will try.
Thank U
MTAVALI said:
Hello everyone, I have rooted and used my MI 9 SE for at atbout one month normally. Today, phone discharged and since that time after charged, Iam not able to boot everywhere, except "fastboot screen", while trying anything like (power and +; power and - etc..) phone always vibrates and boots into fastboot screen.
unfortunatelly, I so far I havent managed to connect it to PC and reflash anything, it is not visible and does nothing, when try to connect to PC (tried all USB ports etc).
Also MI flash tool doesnt do anything with that, so, any idea or solution?
Thank you, sorry for my english.
Click to expand...
Click to collapse
Have you tried to flash from fastboot with MiFlash?
Download here fastboot image and extract it, than Google for MiFlash ver. 2016.08.30 and just unbirck your phone...
sHAKaJaada said:
Have you tried to flash from fastboot with MiFlash?
Download here fastboot image and extract it, than Google for MiFlash ver. 2016.08.30 and just unbirck your phone...
Click to expand...
Click to collapse
Yes that looks working ..) Very thanks
After booting you have to reboot to bootloader and reflash twrp (if you need them) and if you want to flash some dev rom wipe: DALVIK, CACHE and DATA ONLY from WIPE menu, NOT System, than flash dev rom if you like ...
Sent from my Mi 9 SE using XDA Labs
Hello, i tried helping my grandmother by installing the global rom on her Xiaomi Mi Pad 5 Pro WIFI, however as it didn't work i tried forcing the rom onto it by flashing it manually using fastboot, after this i am not able to power it on, or reach fastboot. It's just a black screen it doesn't matter how long you hold the power key it's just completely black.. Is there something i can do???? Or is it completely destroyed?
Global ROM is not available for PRO version. Probably you flashed a wrong one. Try flashing back the CN one matches your model.
mkcs said:
Global ROM is not available for PRO version. Probably you flashed a wrong one. Try flashing back the CN one matches your model.
Click to expand...
Click to collapse
Ahh thats the thing, it won't even power on now, i cannot even access fastboot
desyncccccccc said:
Ahh thats the thing, it won't even power on now, i cannot even access fastboot
Click to expand...
Click to collapse
long press "Volume Down" + "Power" for a few seconds at the same time and then release only"Power" once the fastboot logo appears, finally release "Volume Down" to enter the fastboot mode
Its for xiaomi mi5
Maybe helps
Is there anything I can do? Brick help
My Xiaomi mi5 does not turn on. No lights, fastboot is not accessible, resetting it does not do anything. Basically for any combination of buttons that I press, nothing happens and the screen stays black - it is completely dead. However, when I...
forum.xda-developers.com
Keyvannn said:
Its for xiaomi mi5
Maybe helps
Is there anything I can do? Brick help
My Xiaomi mi5 does not turn on. No lights, fastboot is not accessible, resetting it does not do anything. Basically for any combination of buttons that I press, nothing happens and the screen stays black - it is completely dead. However, when I...
forum.xda-developers.com
Click to expand...
Click to collapse
Yeah so the only problem with this is that mine won't even show up even though i have said drivers installed.. I'm starting to think it's hard bricked
Hello, yes same as me. The tablet are in the 9008 edl state when you put it on your computer. there are many flashing tools out there, the problem are the flash authentification from xiaomis side. i prepared a empty pc with windows 10 and loaded the last fastboot image. then i got a telegram contact from a russian guy who was able to use the xiaomi auth procedure, cost me 30 dollar and 3 days to find out this crap
Xiaomi needs a better way to unbrick its devices instead of Authorized Mi Accounts
Xiaomi has locked down the EDL mode on all of its devices, making it nigh impossible to unbrick a device without an Authorized Mi Account. Read on for more!
www.xda-developers.com
desyncccccccc said:
Hello, i tried helping my grandmother by installing the global rom on her Xiaomi Mi Pad 5 Pro WIFI, however as it didn't work i tried forcing the rom onto it by flashing it manually using fastboot, after this i am not able to power it on, or reach fastboot. It's just a black screen it doesn't matter how long you hold the power key it's just completely black.. Is there something i can do???? Or is it completely destroyed?
Click to expand...
Click to collapse
When it's plugged into the PC, is it recognised with "fastboot devices" or "adb devices"?
If it is you should be able to wipe with "fastboot -w" and start again.
Google detailed instructions.
mikefnz said:
When it's plugged into the PC, is it recognised with "fastboot devices" or "adb devices"?
If it is you should be able to wipe with "fastboot -w" and start again.
Google detailed instructions.
Click to expand...
Click to collapse
Unfortunately no, i do not get any response from fastboot whatsoever, there's no device detection in either fastboot or device manager. I even tried on my laptop which is brand new still no sign of life
fritzeman said:
Hello, yes same as me. The tablet are in the 9008 edl state when you put it on your computer. there are many flashing tools out there, the problem are the flash authentification from xiaomis side. i prepared a empty pc with windows 10 and loaded the last fastboot image. then i got a telegram contact from a russian guy who was able to use the xiaomi auth procedure, cost me 30 dollar and 3 days to find out this crap
Click to expand...
Click to collapse
Where would i be able to get in contact with someone like that??
desyncccccccc said:
Unfortunately no, i do not get any response from fastboot whatsoever, there's no device detection in either fastboot or device manager. I even tried on my laptop which is brand new still no sign of life
Click to expand...
Click to collapse
Try different cable & different pc usb slot?
Try flashing using * Xiaomi professional pro tools . Buy credit and all done,
mikefnz said:
Try different cable & different pc usb slot?
Click to expand...
Click to collapse
Unfortunately any cable/pc i try i get the same result, i'm debating wether i should just get a new one for her with global rom instead
desyncccccccc said:
Unfortunately any cable/pc i try i get the same result, i'm debating wether i should just get a new one for her with global rom instead
Click to expand...
Click to collapse
Don't give up yet!
Charge the tablet with another cable that you know works.
Make sure that you have the most up to date version of Platform Tools.
Make sure that when you're in the Command Prompt that you are in the Platform Tools folder.
Check connections with another device....
mikefnz said:
Don't give up yet!
Charge the tablet with another cable that you know works.
Make sure that you have the most up to date version of Platform Tools.
Make sure that when you're in the Command Prompt that you are in the Platform Tools folder.
Check connections with another device....
Click to expand...
Click to collapse
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
desyncccccccc said:
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
Click to expand...
Click to collapse
Buy an EDL Cable For Qualcomm 9008 Mode for deep flashing
desyncccccccc said:
Hello again, i tried with all possible cables and or devices, somehow it still does not show up, i am rather confused and thinking that i might've broke it fully
Click to expand...
Click to collapse
Have you got the most up to date version of Platform-tools installed and are you checking the connection from a CMD prompt in that Platform-tools folder?
mkcs said:
Buy an EDL Cable For Qualcomm 9008 Mode for deep flashing
Click to expand...
Click to collapse
Could you please link me one of those? I'm over in the EU so maybe they'll be fairly easy to find?
mikefnz said:
Have you got the most up to date version of Platform-tools installed and are you checking the connection from a CMD prompt in that Platform-tools folder?
Click to expand...
Click to collapse
Yeah, i've been doing all of that. I just now found out that there's an EDL cable specifically made for flashing in that mode
So I downloaded pixelos and wished to revert to stock miui, i was using the miflash tool and in the first few seconds my usb disconnected. Then i could not exit fastboot no matter what I pressed. I've tried to flash miui again but am getting the error "data transfer error" and "data transfer time unknown". I could really use the help. Thank you
This kind of crap happened to my Redmi K30 Pro as well. The only difference is that mine did not turn on anymore after I tried to restart it. Both Recovery Mode and Fastboot are unaccessible.
I think there's always a risk going from a custom rom back to miui, specially so when using fastboot.
If u can access EDL mode either via touch point or EDL Usb cable, do that and try flashing the MIUI again through Mi-Flash. Make sure you're using the same MiAccount and hope they will flag it as authorized, otherwise you'll be forced to take it to a service center and have the whole motherboard replaced.
You can also use QFIL but that's a unreliable tool and it always spouts out Sahara error messages.
iceman0826 said:
This kind of crap happened to my Redmi K30 Pro as well. The only difference is that mine did not turn on anymore after I tried to restart it. Both Recovery Mode and Fastboot are unaccessible.
I think there's always a risk going from a custom rom back to miui, specially so when using fastboot.
If u can access EDL mode either via touch point or EDL Usb cable, do that and try flashing the MIUI again through Mi-Flash. Make sure you're using the same MiAccount and hope they will flag it as authorized, otherwise you'll be forced to take it to a service center and have the whole motherboard replaced.
You can also use QFIL but that's a unreliable tool and it always spouts out Sahara error messages.
Click to expand...
Click to collapse
I am not familliar with EDL mode, any tutorials you know to get into that? I really appreciate it.
Google is your bestfriend. If ur going with touch point method, know that it will void the warranty as you'll have to open it and short the pins, to invoke EDL mode.
EDL cable is advisable so try that first and follow the instructions that came with the package. It's a cable with a button.
iceman0826 said:
Google is your bestfriend. If ur going with touch point method, know that it will void the warranty as you'll have to open it and short the pins, to invoke EDL mode.
EDL cable is advisable so try that first and follow the instructions that came with the package. It's a cable with a button.
Click to expand...
Click to collapse
And once im in EDL mode, do i just have to try the miflash tool again?
Also can i try get TWRP again and try boot a rom from there, could that be possible?
If u can access the recovery mode then try that first.
For EDL mode, yes you have to use MiFlash for this. Make sure you're using the same Mi Account that you've used when you unlocked the bootloader and do not remove the device from the Mi Account. This way, it will recognized it as authorized and it will flash successfully.
iceman0826 said:
If u can access the recovery mode then try that first.
For EDL mode, yes you have to use MiFlash for this. Make sure you're using the same Mi Account that you've used when you unlocked the bootloader and do not remove the device from the Mi Account. This way, it will recognized it as authorized and it will flash successfully.
Click to expand...
Click to collapse
Okay I've managed to get TWRP installed, any idea what to do from here?
I'm sure you're knowledgeable in flashing, and knows how to use google. I'm sure u also know that accessing TWRP is a good sign and u can now access fastboot or EDL via adb from there.
iceman0826 said:
I'm sure you're knowledgeable in flashing, and knows how to use google. I'm sure u also know that accessing TWRP is a good sign and u can now access fastboot or EDL via adb from there.
Click to expand...
Click to collapse
I've only flashed one custom rom so not too knowledgable, I would probably try to get a miui recovery file and transfer it to my phone and then install from twrp. I think that would work
Also i cant decrypt my data despite entering the only pin I have ever used