S9+ (SMG-9650) Bootloop - Samsung Galaxy S9 Questions & Answers

Hi to all!!
My name is lucas, I rooted my S9+ smg9650 with @klabit87 posts and info (TWRP installed). Everything perfect, root working. Today i Wanted to upgrade my ROM from android 8.0 to 10. had problems with data partition but got them repaird with TWRP, but muy problem was that ODIN did not flash the new ROM, it stayed frozen "SetupConnection.." or "initialization.. " and then FAIL, USB debugging and OEM unlock were set. Finally I got tierd and decided that i wanted to set everything to stock, so i made a full buckup, and i dont know why, i flashed a recovery image from a andoid 10 rom, using TWRP app, when rebooted, stays at bootloop, i can use download mode, but cant flash TWRP back with odin, nor any other firmwere. Cant turn phone off, Cant get to recovery mode.
Left cornet message on bootloop., (Same massage on download screen)
RPMB fuse blown
RPMB provisoned
Current binary: custom
System status: custom
FRP lock off
oem lock: off
warranty void: 0x1 (0x30c)
qualcomm secreboot: Enable
RP SWREV : B3 (2,2,2,3,2) K3 S3
SECURE DOWNLOAD : ENABLE
DID: 20208B33D8317411
Any ideas, i beel reading every post i could find online, but cant get to solve this.
any idea could help.
Thanks!!

Move post
should be moved to S9+ threads, i will try to find out how.
Sorry

Canita2000 said:
should be moved to S9+ threads, i will try to find out how.
Sorry
Click to expand...
Click to collapse
sorry can't help you out hopefully you will get out of the problem. anyway great job keep it up [emoji106][emoji106][emoji108][emoji108]
Sent from my SM-G965F using Tapatalk

Related

S6 Edge Brick HELP!

Hello all,
I rooted my G925T device 1-2 weeks ago (SUPERSu?) and haven't had any major problems. Yesterday my phone died and while charging, I turned it back on only to get stuck on the T-mobile screen. I tried most everything including using Odin to reset to stock 5.1.1 firmware but I am getting a FAILED response (can't open the serial(com) port).
Some notes (not sure if relevant):
-90% sure my SuperSU was not enabled when my phone died and this started happening
-Pretty sure I unchecked the USB Debugging right after I rooted
-I wiped all my data from the recovery mode
Any help, tips, suggestions? THANKS!
bodef said:
Hello all,
I rooted my G925T device 1-2 weeks ago (SUPERSu?) and haven't had any major problems. Yesterday my phone died and while charging, I turned it back on only to get stuck on the T-mobile screen. I tried most everything including using Odin to reset to stock 5.1.1 firmware but I am getting a FAILED response (can't open the serial(com) port).
Some notes (not sure if relevant):
-90% sure my SuperSU was not enabled when my phone died and this started happening
-Pretty sure I unchecked the USB Debugging right after I rooted
-I wiped all my data from the recovery mode
Any help, tips, suggestions? THANKS!
Click to expand...
Click to collapse
Try this. Smart Switch usually can fix your boot loops. Be warned though you will lose everything on the phone. It will be reset to like you got it from the store. Except with the latest firmware.
can be deleted
jmc302005 said:
Try this. Smart Switch usually can fix your boot loops. Be warned though you will lose everything on the phone. It will be reset to like you got it from the store. Except with the latest firmware.
Click to expand...
Click to collapse
Hey, thanks for the reply.
Problem is, when I am in download mode it only tells me the following:
ODIN MODE (in red)
Product Name: SM-G925T
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
Secure Download: Enabled (in blue)
KNOX WARRANT VOID: 1
RP SWREV: Letter:Number Letter:Number Letter:Number
And then Downloading... Do not turn off target
Flash Latest Stock ROM
bodef said:
Hey, thanks for the reply.
Problem is, when I am in download mode it only tells me the following:
ODIN MODE (in red)
Product Name: SM-G925T
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
Secure Download: Enabled (in blue)
KNOX WARRANT VOID: 1
RP SWREV: Letter:Number Letter:Number Letter:Number
And then Downloading... Do not turn off target
Click to expand...
Click to collapse
FIrst Flash Full Stock Firmware than See if work .
1.If not work flash Unikernel V8-002 in odin.. ( it must work )
2.If both not work download firmware in 4 parts ...(BL,AP,CP,& CSC)
Just Flash only BL and AP (it work 100% Tested )
These must work ..
try and post result
The Emergency Recovery Smart Switch method worked!
I was able to find my s/n when I selected to view the barcode before going into download mode.
I thought s/n would be IMEI but its not.
bodef said:
The Emergency Recovery Smart Switch method worked!
I was able to find my s/n when I selected to view the barcode before going into download mode.
I thought s/n would be IMEI but its not.
Click to expand...
Click to collapse
I was just about to tell you that you need to press Home button to see S/N before you press Vol-Up. Glad you got it worked out. Please hit the thanks button if I helped you out.

925t stuck at boot screen after odin update to doj7

So guys, bought this phone used 3 days ago. The phone was rooted and the fingerprint scanner was not working giving some error. So I decided to get the phone returned back to stock.
I flashed the G925TUVU3DOJ7_G925TTMB3DOJ7_G925TUVU3DOJ7_HOME.tar file via odin 3.10.6. All files were successfully flashed with pass message but now i am stuck on the boot screen at s6 edge logo. I did a factory reset and wiped the cache but no luck.
The recovery shows an error of dm-verity verification failed... as well in the bottom. I can get the phone in download mode. The current binary is samsung official but in system status it still says Custom. I tried flashing G925TUVU2COF6_G925TTMB2COF6_G925TUVU2COF6_HOME.tar but it doesn't let me flash it as I read i cannot downgrade.
I have tried searching at different places but couldn't seem to find any appropriate solution as most of them are for cof6 or cof8 firmware. I would appreciate a lot if someone could guide me step-by-step procedure to get my phone working back.
Note: I think that the phone IMEI was also repaired as the IMEI on back glass and in the system does not match.
I also cannot get any assistance from t-mobile as I live in Pakistan. I could not attach shots as i have less than 10 posts so writing the status:
In download mode:
PRODUCT NAME: SM-G925T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0301)
AP SWREV: B:3 K:2 S:2
Recovery error at the bottom:
dm-verity verification failed. . .
Need to check DRK first. . .
It sounds like there may be an issue with your IMEI. I think you should try and use Smart Switch on your PC to do an emergency recovery. It will completely wipe the phone and reset everything to how it should be.
Emergency recovery requires the serial number in order to proceed. You can get that by going into Download mode but before you hit Vol Up to continue hit Home instead. It will show IMEI and Serial Number (the bottom number).
Samsung Smart Switch for PC can be downloaded from Here. Install Smart Switch. Start up Smart Switch and click more in upper right corner. If you don't have the Samsung drivers installed you can install them from here. Or if you would like to reinstall them.
After you are done with drivers connect your phone to the PC and click more and click "Emergency software recovery and initialization" (the first option). It should ask for your serial number. enter it and it should start doing it's thing.
Hopefully this works for you and good luck.
Thanks for the fast reply. I flashed it using the smart switch software. The program completed successfully but still the same result. Stuck at boot logo and same dm-verity error in recovery
DM Verity Verification failed
muhsaad said:
Thanks for the fast reply. I flashed it using the smart switch software. The program completed successfully but still the same result. Stuck at boot logo and same dm-verity error in recovery
Click to expand...
Click to collapse
Hello , if you still facing this issue after flash full stock
try to write unikernel v8-002 (remember FRP LOCK = OFF )
It must work ,
i am sure after flash Unikernel is will work
post result if not work
Thanks alot @jayshaa. Finally booted up... Hats off to you man...!! :good:
Sorry to disturb again... Today when I restart the phone, I couldn't pass the boot screen as I gave me the error Custom Binary blocked by FRP Lock. Frp lock turned on automatically and now I am again stuck at the boot screen. I again flashed the stock rom but the frp lock is still on. I couldn't flash the kernal as well because of this lock.
Someone please guide me to turn this frp lock off and get my phone working again.
Need to check DRK first. .
This error means at some point your efs probably was wiped meaning the drk was wiped... unless this is fixed the phone will boot loop everytime you update unless you flash a modified kernel...
So how do I fix that or turn frp lock off?
Anyone???
muhsaad said:
Sorry to disturb again... Today when I restart the phone, I couldn't pass the boot screen as I gave me the error Custom Binary blocked by FRP Lock. Frp lock turned on automatically and now I am again stuck at the boot screen. I again flashed the stock rom but the frp lock is still on. I couldn't flash the kernal as well because of this lock.
Someone please guide me to turn this frp lock off and get my phone working again.
Click to expand...
Click to collapse
That can only be turned off via Developer Options in Settings. If you flashed a custom kernel then you cannot turn it off because you will boot loop. You must flash stock kernel. Or just reflash the stock firmware package.
After you get back to stock. get to developer options and turn off the FRP lock. Then you can flash away.

[HELP] GT-i9190 "Recovery Booting.... warranty set bit: recovery"

Hello y'all, this is my first post, I'm not so new in this forum, I've been reading hundred of posts here, but I think it's time to ask for some help because I'm really going insane (lol).
Ok, so let's begin... I made a mistake upgrading my Mini S4 (GT-9190) to 4.4.2 and installing TWRP 3.0.3... Since my phone was in a logo stuck statement, I wanted it to work. I thought that "rooting" it via recovery (TWRP) would be good, but it was a big mistake.
When I tried to load a new 4.4.2 firmware on Odin, it just got stuck (Odin) at writing the recovery.img showing up a blue box with "RECOVERY" in it. I waited hours, and nothing. I had to disconnect the phone, pull the battery off, and reset.
I flashed it again, it was "successful"
Now.. the phone is showing me this annoying message when I try to boot recovery:
RECOVERY BOOTING....
warranty set bit: recovery
I read this was caused because I don't have installed the stock recovery, but how could it be that? I mean, I'm installing stock firmwares only. (4.4.2 versions, since the annoying knox doesn't allow to downgrade these phones, AT LEAST from what I've read and tried on my own...)
Also, when I try to do a "normal boot" (only Power button pressed) this screen goes directly to ODIN MODE showing up the following text on the top:
Could not do normal boot.
ODIN MODE
PRODUCT NAME: GT-I9190
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
BOOTLOADER AP SWREV: 2
WRITE PROTECTION: Enable
I've flashed like 10 different roms by now, and still no luck I don't know what to do. If someone knows, please let me know asap. I'll be extremely glad with any response.
Thanks in advice. Mr. Rage~
P.S: I can't post images because I'm new and this is my first thread. Sorry.
Nobody knows? Oh well... :crying:
AlvyRage said:
Nobody knows? Oh well... :crying:
Click to expand...
Click to collapse
U can enter in Download Mode? Is your answer is positive, try this method:
https://forum.xda-developers.com/showthread.php?t=2751224
I have a problem like you, but none work for me..

Strange bricked GT-I9195 (bootloop and no recovery mode)

Hi all!
I've got a bricked Samsung S4 mini.
It's stuck in a bootloop and I've got no recovery mode (No command with dead droid). Kies doesn't recognize it.
I've tried:
- flashing CWM and TWRP to get recovery mode up and running but no luck. Odin completes fine and it restarts (tried to enter on first reboot as described) but still "No command".
- flashing stock firmware from sammobile.com. I completes fine but when i restart its no difference (bootloop and no recovery)
- flashing stock firmware (all files with pit file) https://forum.xda-developers.com/showthread.php?t=2751224. This gets error in Odin and "SW REV CHECK FAIL: FUSED 2 > BINARY 0" in on the phone. I suspect its the wrong firmware.
In download mode:
Code:
CURRENT BINARY: Samsung Official
SYSTEM STATYS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
BOOTLOADER AP SWREV: 2
WRITE PROTECTION: Enable
I'm all out of ideas and would love some help. I've found some similar threads on this but no solution.
How do i find out exactly what model number I've got. The back says GT-I9195 and the Samsung Warrany site says "cant find product". I guess its because its a Scandinavian phone.
Any help much appreciated.
/Daniel
Reply.
What was the last thing you did that caused the boot loop and made recovery inaccessible?
Exanneon said:
What was the last thing you did that caused the boot loop and made recovery inaccessible?
Click to expand...
Click to collapse
I got it from a friend and he said that it started to behave strange. So he decided to try flashing a custom rom.
It seems to have been a little bit to custom for this device Maybe he flashed the wrong version.
Reply.
Flashing a "wrong version" can be fatal to an android device, this has happened to 2 of my phones to my younger, more inexperienced self (around 4 years ago), for one of the phones recovery and download mode became corrupted (inaccessible), and the other phone became a complete and utter "brick" (useless), it was unable to even be turned on!
My point is that if he had flashed a rom, or even worse; a stock firmware for his phone this can seriously kill it, I suggest asking him what rom and what model the rom was built for.
Update me once you find out.
Exanneon said:
Flashing a "wrong version" can be fatal to an android device, this has happened to 2 of my phones to my younger, more inexperienced self (around 4 years ago), for one of the phones recovery and download mode became corrupted (inaccessible), and the other phone became a complete and utter "brick" (useless), it was unable to even be turned on!
My point is that if he had flashed a rom, or even worse; a stock firmware for his phone this can seriously kill it, I suggest asking him what rom and what model the rom was built for.
Update me once you find out.
Click to expand...
Click to collapse
He said that he doesn't know exactly. He tried a few but all should have been for the GT-I9195.
Reply.
If all of them were for the GT-I9195, then please list them for me, or at least the last one that was flashed, as I can't help you if I'm told that everything was done correctly.
Sure
- I9195XXUCPE1 (https://www.sammobile.com/firmwares/galaxy-s4-mini/GT-I9195/NEE/download/I9195XXUCPE1/78908/)
- I9195XXSCQA3
- I9195XXUBML4-D-BT (4 files + PIT-file CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523)
Reply.
So you haven't been flashing roms, but rather stock firmwares, what odin were you using?
Exanneon said:
So you haven't been flashing roms, but rather stock firmwares, what odin were you using?
Click to expand...
Click to collapse
My friend said that he initially flashed a Cyanogenmod rom and it worked but he didin't like it and the troubles started when he tried to revert to stock.
Odin version: 3.09
Thanks.
Reply.
That's unusual, flashing stock firmware is very unlikely to cause any problems but fix everything...Could you please give me the link to the stock firmware your friend was flashing? (If you have it)
standarggbg said:
Hi all!
I've got a bricked Samsung S4 mini.
It's stuck in a bootloop and I've got no recovery mode (No command with dead droid). Kies doesn't recognize it.
I've tried:
- flashing CWM and TWRP to get recovery mode up and running but no luck. Odin completes fine and it restarts (tried to enter on first reboot as described) but still "No command".
- flashing stock firmware from sammobile.com. I completes fine but when i restart its no difference (bootloop and no recovery)
- flashing stock firmware (all files with pit file) https://forum.xda-developers.com/showthread.php?t=2751224. This gets error in Odin and "SW REV CHECK FAIL: FUSED 2 > BINARY 0" in on the phone. I suspect its the wrong firmware.
In download mode:
Code:
CURRENT BINARY: Samsung Official
SYSTEM STATYS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
BOOTLOADER AP SWREV: 2
WRITE PROTECTION: Enable
I'm all out of ideas and would love some help. I've found some similar threads on this but no solution.
How do i find out exactly what model number I've got. The back says GT-I9195 and the Samsung Warrany site says "cant find product". I guess its because its a Scandinavian phone.
Any help much appreciated.
/Daniel
Click to expand...
Click to collapse
same problem. did you find any luck fixing your phone? wanna try it too if so :good:
He doesn't remember but think it was I9195XXSCQA3.
ddikere said:
same problem. did you find any luck fixing your phone? wanna try it too if so :good:
Click to expand...
Click to collapse
Nope. Not yet.

Need help getting SM-N910P back to stock rom

Let me get you up to speed: From the latest update on the official marshmallow firmware (SM-N910P is my version), I rooted it using odin, then put the wrong version of TWRP on by accident (tbltespr = Note 4 Edge) but then put the right one on (trltespr) but as with everybody else that did this, I got stuck with that horrible screen offset. The *#2663# seemed to ve work until I reboot, so I put LineageOS (14.1 unofficial)(I had already been considering doing this before the incident) thinking it would fix it but all it did was make things worse. I am not stuck in a boot loop, even after all the crap I have tried, I can still flash LineageOS and yes, I can use my S Pen but there are a lot of things I use very often that it won't work with.
Now, on to what I have tried: EVERYTHING! The biggest problem to come out of putting LineageOS on there is that I can no longer downgrade (possibly not at all with any method) using ODIN. I have tried lots and lots of firmware, bootloaders, etc and everytime I get the same error (except for twrp, which I can flash):
SW REV CHECK FAIL : [aboot]Fused 5 > Binary 4
[1] eMMC write fail: ABOOT
So it seems using Odin is out of the question, I have tried downloading thing for custom 6.01 roms that either requires something to be flashed using Odin first, have a link that goes to a 404 page, or is not for my version. I have attempted multiple times to use Kies but it keeps rejecting my serial number. Under the battery, I only find the Hex and Dec, I have tried every number I can find on the box, in the battery, add a 1 or 0 there, shorten it here. I even got some serial number apps downloaded to confirm my serial number but still, nothing worked, so it seems Kies is out of the question as well.
Because I have come across nothing else, I can't confirm if TWRP will work or not so that is my best bet.
So here is what I have come to ask, I need a stock rom, whatever version (since I can just use the update later) that is TWRP flashable, let me repeat, TWRP flashable, no tar or md5 Odin files, TWRP! Thank you for anyone and everyone that help me. I apologize if I am breaking any forum rules, this is my first and most likely last post here.
Extra Tidbit of Info
Also, if this helps at all, this is what my Download Mode screen says when idle/(before I try to flash to it)
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T3, R1, A5, P1
SECURE DOWNLOAD : ENABLE
UDC START
Here is an idea, if someone out there could kindly do it for me. Make a TWRP backup image of a factory reset stock rom and share it on google or something. then I should just be able to flash the image, right?
I have a problem on note4 sprint. after install custom rom linkage 15 unofficial naughat, i want to restore to stock rom using odin3 but why always fail. but that is the last stock rom I use.

Categories

Resources