Need help getting SM-N910P back to stock rom - Sprint Galaxy Note 4 Q&A, Help & Troubleshooting

Let me get you up to speed: From the latest update on the official marshmallow firmware (SM-N910P is my version), I rooted it using odin, then put the wrong version of TWRP on by accident (tbltespr = Note 4 Edge) but then put the right one on (trltespr) but as with everybody else that did this, I got stuck with that horrible screen offset. The *#2663# seemed to ve work until I reboot, so I put LineageOS (14.1 unofficial)(I had already been considering doing this before the incident) thinking it would fix it but all it did was make things worse. I am not stuck in a boot loop, even after all the crap I have tried, I can still flash LineageOS and yes, I can use my S Pen but there are a lot of things I use very often that it won't work with.
Now, on to what I have tried: EVERYTHING! The biggest problem to come out of putting LineageOS on there is that I can no longer downgrade (possibly not at all with any method) using ODIN. I have tried lots and lots of firmware, bootloaders, etc and everytime I get the same error (except for twrp, which I can flash):
SW REV CHECK FAIL : [aboot]Fused 5 > Binary 4
[1] eMMC write fail: ABOOT
So it seems using Odin is out of the question, I have tried downloading thing for custom 6.01 roms that either requires something to be flashed using Odin first, have a link that goes to a 404 page, or is not for my version. I have attempted multiple times to use Kies but it keeps rejecting my serial number. Under the battery, I only find the Hex and Dec, I have tried every number I can find on the box, in the battery, add a 1 or 0 there, shorten it here. I even got some serial number apps downloaded to confirm my serial number but still, nothing worked, so it seems Kies is out of the question as well.
Because I have come across nothing else, I can't confirm if TWRP will work or not so that is my best bet.
So here is what I have come to ask, I need a stock rom, whatever version (since I can just use the update later) that is TWRP flashable, let me repeat, TWRP flashable, no tar or md5 Odin files, TWRP! Thank you for anyone and everyone that help me. I apologize if I am breaking any forum rules, this is my first and most likely last post here.

Extra Tidbit of Info
Also, if this helps at all, this is what my Download Mode screen says when idle/(before I try to flash to it)
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T3, R1, A5, P1
SECURE DOWNLOAD : ENABLE
UDC START

Here is an idea, if someone out there could kindly do it for me. Make a TWRP backup image of a factory reset stock rom and share it on google or something. then I should just be able to flash the image, right?

I have a problem on note4 sprint. after install custom rom linkage 15 unofficial naughat, i want to restore to stock rom using odin3 but why always fail. but that is the last stock rom I use.

Related

[Q] ODIN won't flash anything on my Samsung Galaxy s3 - QUALCOMM SECUREBOOT: ENABLE

I did the Android 4.3 upgrade to my Galaxy S3 and now I can't not flash anything on my phone.
In ODIN Mode displays the following:
ODIN MODE
PRODUCT NAME:SGH-T999
CUSTOM BINARY DOWNLOAD: YESS (4 COUNT)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOADER AP SWREV: 1
It seems that my bootloader is in lock mode
Any suggestions on how to fix this?
Thanks
So you try to root you're device 4 times !!! I got the solution on my sgh-t999, but I don't know if it's working on yours and I have no guarantee.
So how I solve this problem :
1. I'd installed TWRP via ODIN from HERE
2. I have an old backup(4.1.2 - T999UVDMD5, rooted) maked with TWRP
3. After install TWRP (worked for me), I deleted all internal storage from device from TWRP menu WIPE -- Advanced
4. I restored from old backup, and that's it. But again I'm not ofer you any guarantee.
Then you can reset your count from 4 to 0, but Warranty Bit and BOOTLOADER AP SWREV count will stay to 1.
Sounds like your eFuse may be blown. If that's not the case, then you might be able to proceed.
Try flashing Recovery as mentioned. Then flash SuperSU from Chainfire's thread.
If you took the 4.3 update, then you are stuck with 4.3 firmware. You can still flash recovrry and roms though.
If you want to remain on 4.3, I suggest flashing my rom in development.
If you just root as ut is now you will have alk sorts of troubke from knox.
DocHoliday77 said:
If you just root as ut is now you will have alk sorts of troubke from knox.
Click to expand...
Click to collapse
Burning midnight oil are we Doc ?
Stuck
Hello. I really need help. I followed the steps from this tutorial: http://forum.xda-developers.com/showthread.php?t=1840030 but I’m still stuck. First I had my Verizon Samsung GS3 rooted with 4.1.2. Everything was working just fine. The update 4.3 came out and I used Voodoo to keep my root on my phone. When the phone rebooted my root was gone but the superuser was still installed for some reason but I wasn’t able to use it. I went to root back to 4.1.2 and after ODIN was done and it said it “Passed”, when the phone boots I get the message: "System software not authorized by Verizon Wireless has been found on your phone... Please turn off phone and to Verizon Wireless store for help". I rebooted the phone in download mode again then selected cancel like some other people have done with the same problem but I get the same message. When I try to flash the “VRALEC bootchain” it gets to the part when it says: "NAND Write Start! Then it says FAIL! (Auth) All threads completed. (Succeeded 0 / failed 1). On the phone screen it says:”SW REV CHECK FAIL: Fused 1.Binary 0”. I tried the second bootloader that I downloaded the file named: BOOTLOADER_I535VRALF2_618049_REV09_user_low_ship.tar.md5”. It also fails. I used the md5 file checker to make sure the all the md5 files were good and they all passed with the correct signatures. No luck trying to flash the bootchains. I then tried to flash the “stock.vzw_root66.tar” with the “Auto reboot, F. Reset time and NAN erase all” selected. It goes through the whole cycle and it even says on the phone in blue: “ERASING USERDATA PARTITION”. The flash on Odin completes with no problems, but when the phone auto reboots, once again I get the: "System software not authorized by Verizon Wireless has been found on your phone... Please turn off phone and to Verizon Wireless store for help”. I rebooted the phone in recovery mode. I did the “wipe data/factory reset” and “wipe cache partition” then reboot the phone again. Once again I get the: "System software not authorized by Verizon Wireless has been found on your phone... Please turn off phone and to Verizon Wireless store for help". I also tried Hero’s bootloader unlock using “Root.66” and the pit file: “sch-i535-16gb.pit” except the part of updating the VRALHD baseband since I can’t even flash CWM. It passes but when it boots still get the "System software not authorized by Verizon Wireless has been found on your phone... Please turn off phone and to Verizon Wireless store for help” message again. I’ve tried flashing CWM and when it goes into the”NAND Write Start!!” It shows “FAIL! (Auth)”. I get the same error trying to flash TWRP. Even flashing the stock ROM 4.1.2 I get the "System software not authorized by Verizon Wireless has been found on your phone... Please turn off phone and to Verizon Wireless store for help”. I’ve tried to install .zip files from the “apply update from external storage” but then it gets as far as “Verifying update package… and then it goes into “E: signature verification failed. Installation aborted”. I tried h311sdr0id’s method flashing “BOOTLOADER_I535VRALF2_618049_REV09_user_low_ship.tar.md5” and it also fails. I am using the USB cord that came with the phone. I’m running Windows 8.1 but also tried using Windows 7. Any help would be appreciated. Thanks.
You can't downgrade to 4.1.2 with Odin once you've done the 4.3 official update.. Try flashing 4.3 in Odin
Sent from my SGH-M919 using Tapatalk
Found my solution here: http://forum.xda-developers.com/showthread.php?t=2586319 Thanks a lot
Sent from my SCH-I535 using Tapatalk
this worked for me
gsantiag said:
Hello. I really need help. I followed the steps from this tutorial: http://forum.xda-developers.com/showthread.php?t=1840030 but I’m still stuck. First I had my Verizon Samsung GS3 rooted with 4.1.2. Everything was working just fine. The update 4.3 came out and I used Voodoo to keep my root on my phone. When the phone rebooted my root was gone but the superuser was still installed for some reason but I wasn’t able to use it. I went to root back to 4.1.2 and after ODIN was done and it said it “Passed”, when the phone boots I get the message: "System software not authorized by Verizon Wireless has been found on your phone... Please turn off phone and to Verizon Wireless store for help". I rebooted the phone in download mode again then selected cancel like some other people have done with the same problem but I get the same message. When I try to flash the “VRALEC bootchain” it gets to the part when it says: "NAND Write Start! Then it says FAIL! (Auth) All threads completed. (Succeeded 0 / failed 1). On the phone screen it says:”SW REV CHECK FAIL: Fused 1.Binary 0”. I tried the second bootloader that I downloaded the file named: BOOTLOADER_I535VRALF2_618049_REV09_user_low_ship.tar.md5”. It also fails. I used the md5 file checker to make sure the all the md5 files were good and they all passed with the correct signatures. No luck trying to flash the bootchains. I then tried to flash the “stock.vzw_root66.tar” with the “Auto reboot, F. Reset time and NAN erase all” selected. It goes through the whole cycle and it even says on the phone in blue: “ERASING USERDATA PARTITION”. The flash on Odin completes with no problems, but when the phone auto reboots, once again I get the: "System software not authorized by Verizon Wireless has been found on your phone... Please turn off phone and to Verizon Wireless store for help”. I rebooted the phone in recovery mode. I did the “wipe data/factory reset” and “wipe cache partition” then reboot the phone again. Once again I get the: "System software not authorized by Verizon Wireless has been found on your phone... Please turn off phone and to Verizon Wireless store for help". I also tried Hero’s bootloader unlock using “Root.66” and the pit file: “sch-i535-16gb.pit” except the part of updating the VRALHD baseband since I can’t even flash CWM. It passes but when it boots still get the "System software not authorized by Verizon Wireless has been found on your phone... Please turn off phone and to Verizon Wireless store for help” message again. I’ve tried flashing CWM and when it goes into the”NAND Write Start!!” It shows “FAIL! (Auth)”. I get the same error trying to flash TWRP. Even flashing the stock ROM 4.1.2 I get the "System software not authorized by Verizon Wireless has been found on your phone... Please turn off phone and to Verizon Wireless store for help”. I’ve tried to install .zip files from the “apply update from external storage” but then it gets as far as “Verifying update package… and then it goes into “E: signature verification failed. Installation aborted”. I tried h311sdr0id’s method flashing “BOOTLOADER_I535VRALF2_618049_REV09_user_low_ship.tar.md5” and it also fails. I am using the USB cord that came with the phone. I’m running Windows 8.1 but also tried using Windows 7. Any help would be appreciated. Thanks.
Click to expand...
Click to collapse
factory reset then use odin to root and you will get a supersu unfortunately stopped after boot.......then download supersu.app and put on root of hdd then manually intall this will update and u should be able to disable knox at this point........then go download the odin mobile app from market load your stock 4.1.2 with keys .tar file and flash using odin mobile this should get u back to official 4.1.2 im working on the bootloader now its still locked but... now that I don't have knox it shouldn't be a problem
Adryanxxx said:
So you try to root you're device 4 times !!! I got the solution on my sgh-t999, but I don't know if it's working on yours and I have no guarantee.
So how I solve this problem :
1. I'd installed TWRP via ODIN from HERE
2. I have an old backup(4.1.2 - T999UVDMD5, rooted) maked with TWRP
3. After install TWRP (worked for me), I deleted all internal storage from device from TWRP menu WIPE -- Advanced
4. I restored from old backup, and that's it. But again I'm not ofer you any guarantee.
Then you can reset your count from 4 to 0, but Warranty Bit and BOOTLOADER AP SWREV count will stay to 1.
Click to expand...
Click to collapse
Hello when i enter my download mode it looks like this
ODIN MODE
PRODUCT NAME: SPH-L710
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: samsung official
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 0
BOOTLOADER AP SWREV: 1
What does this mean to me?? Am i locked to newer firmware update from Samsung.
Unfortunately, yes...butt you can read this and wait until developers will solve the KNOX problem...http://forum.xda-developers.com/showthread.php?t=2486346
hello ,problem
CyanogenMod 11 cm-11-20140217-NIGHTLY-d2tmo back to stock 4.1.2
odin 3.07 and 4.1.2 root66_TMO_T999UVDMD5.tar.md5
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> aboot.mbn
<ID:0/012> NAND Write Start!!
<ID:0/012> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
please help , any tutorial or video , sorry me bad english
same here i also need help because my galaxy s3 is bricked and everytime i flash it with odin the flash fails
mne displays the following:
PRODUCT NAME: SGH-1747
CUSTOM BINARY DOWNLOAD: Yes (3 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOM SECUREBOOT: ENABLE
WARRANTY BIT: 1
BOOTLOADER AP SWREV: 2
Are you certain you are trying to flash the correct firmware? I believe you'd need to be using the MJB firmware, but that's just a guess based on the software revision shown.
After booting into download mode, but before connecting to the computer, are you removing the debrick sdcard?
facing the same problem
T3chn0b0y15 said:
same here i also need help because my galaxy s3 is bricked and everytime i flash it with odin the flash fails
mne displays the following:
PRODUCT NAME: SGH-1747
CUSTOM BINARY DOWNLOAD: Yes (3 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOM SECUREBOOT: ENABLE
WARRANTY BIT: 1
BOOTLOADER AP SWREV: 2
Click to expand...
Click to collapse
did you fix this? can you let me know coz im stuck!!!
---------- Post added at 09:25 PM ---------- Previous post was at 09:20 PM ----------
alemosman said:
Hello when i enter my download mode it looks like this
ODIN MODE
PRODUCT NAME: SPH-L710
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: samsung official
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 0
BOOTLOADER AP SWREV: 1
What does this mean to me?? Am i locked to newer firmware update from Samsung.
Click to expand...
Click to collapse
did you ended up fixing it? please let me know!!
What version are you on and what version are you trying to flash?
help me s3 t999 can't flash with odin or recovery, root missing problem.
So I rooted my s3 t999 so I could get cyaneginemod. I used the flashing rom way, and it didn't work,(i used twerp recovery) it kept saying failed, and then I went to the easier way of installing the rom with, the new cyaneinge mod app, (I'm still rooted). Then after waiting for it too finish my phone rebooted, but cyaneinge was not on it, instead it came with a page that said root missing I clicked on yes fix the missing root, n well nothing happens I was back on touchwiz, superuser was their but Samsung Knox kept it from doing anything but I used supersu to disable it. I thought that knox was keeping the cyaneinge mod app from working, so I decided to downgrade to 4.1 when knox didn't exist, bless that time, but I couldn't since odin kept failing at flashing a stock rom, I did this soo msoon times I went through every firm ware n back to 4.3, it kept failing, im pretty sure its boot locked, but the root is also limited, every time I reboot n go to recovery n leave it asked me if it should fix the missing root, but yes or no, it wont change, n every time I reboot it says optimizing apps 0 of 48, it takes at least 5 min to go through. N after going through every forum, YouTube video, asking friends, I still can't find a solution, n im stuck on a screwd up root version of 4.3 plz help
Please only post your question once. There is no benefit to multiple posts.
Need Help Guys
]Well I have a Samsung t999 which had a USB problem it charge alright but my MTP wasn't working dunno why.. I figure it was a software problem so tried to flash it with cm11 but I 4got to backup and wiped everything in recovery mode and the cm11 didn't work now my Samsung is stuck in bootloop and I can't use Odin coz my USB cn only charge but not MTP mode... I rli need help... Is there any way I can flash my phone without using Odin... I rli love my phone we been thru alot together... Need help please
this may be crazy AND wrong. but can you put ext. sd card in another phone, download a ROM and whatever else you need. then put the ext.sd back in your phone and flash ?
i prob. got your problem wrong, but just an idea. :banghead:
err on the side of kindness

[Q] Firmware upgrade encountered an issue?

I have a Sprint Samsung Galaxy s3 (Pebble Blue).
I downloaded Odin and tried to root it to CF-Root-SGS3, but using this tutorial video: youtube com watch?v=mndQZqom3Ac
Yes, I am a complete noob, therefore it failed. When I tried to turn it back on, it showed me this:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I did perform a full back up of my phone on Kies before starting, thankfully, but when I tried performing the emergency firmware recovery, it won't show my device in the list of devices requiring emergency recovery. I also don't know what the recovery code would be.
I also tried performing the firmware upgrade and initialization process, but it required my IMEI number, and I don't know how to find that without my phone working properly.
This is the other info my phone is showing:
ODIN MODE
PRODUCT NAME: SPH-L710
CUSTOM BINARY DOWNLOAD: Yes (4 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 0
BOOTLOADER RP SWREV: 1
Please help. Thank you so much in advance!
Did you get this taken care of? Hopefully you havent been phoneless for the past few days. Can you still boot into download mode? if you can you should try to Odin the stock tar file for the latest firmware/system update (ND8). It's in a thread here http://forum.xda-developers.com/showthread.php?t=2738533 You should be able try rooting again after this gets your phone up and running again. The only thing to worry about is that YOU CAN NOT DOWNGRADE FIRMWARE after MK3 or ND8 without bricking your phone.
Thank you!
I replied to your message, thanks again!

[Q] Static screen upon boot, no PIT in Odin

Hi, so I recently rooted, flashed TWRP, and put SlimKat on my phone, and it worked great for a few days, but then all of a sudden it would freeze on the lockscreen. To fix this I would need to pull out the battery or do the hard reboot. Then, today, after doing that once again, when I tried to boot normally or into recovery, it showed static (I'll include an image). It does, however, boot into download mode.
So then, I thought I would try and put a new recovery on it through Odin to see if that would fix anything, but upon pushing start in Odin it says no PIT partition and fails.
I have a Nandroid backup made through TWRP (I'm not sure if the one on hand is from stock or right after flashing SlimKat).
In case you need this info, here is what it says when download mode is booted:
ODIN MODE
PRODUCT NAME: SGH-T889
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 0
AP SWREV:
I'm hoping it isn't a hardware issue and that I can, if anything, put it back to stock.
Any help is greatly appreciated! Thank you!
Any update? I have read that when it loses model number it is one of the IC's. I still have model number when linked to odin.
Flashing in Odin may require the original Samsung USB cable in order to read the phone'a partition information.

Strange bricked GT-I9195 (bootloop and no recovery mode)

Hi all!
I've got a bricked Samsung S4 mini.
It's stuck in a bootloop and I've got no recovery mode (No command with dead droid). Kies doesn't recognize it.
I've tried:
- flashing CWM and TWRP to get recovery mode up and running but no luck. Odin completes fine and it restarts (tried to enter on first reboot as described) but still "No command".
- flashing stock firmware from sammobile.com. I completes fine but when i restart its no difference (bootloop and no recovery)
- flashing stock firmware (all files with pit file) https://forum.xda-developers.com/showthread.php?t=2751224. This gets error in Odin and "SW REV CHECK FAIL: FUSED 2 > BINARY 0" in on the phone. I suspect its the wrong firmware.
In download mode:
Code:
CURRENT BINARY: Samsung Official
SYSTEM STATYS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
BOOTLOADER AP SWREV: 2
WRITE PROTECTION: Enable
I'm all out of ideas and would love some help. I've found some similar threads on this but no solution.
How do i find out exactly what model number I've got. The back says GT-I9195 and the Samsung Warrany site says "cant find product". I guess its because its a Scandinavian phone.
Any help much appreciated.
/Daniel
Reply.
What was the last thing you did that caused the boot loop and made recovery inaccessible?
Exanneon said:
What was the last thing you did that caused the boot loop and made recovery inaccessible?
Click to expand...
Click to collapse
I got it from a friend and he said that it started to behave strange. So he decided to try flashing a custom rom.
It seems to have been a little bit to custom for this device Maybe he flashed the wrong version.
Reply.
Flashing a "wrong version" can be fatal to an android device, this has happened to 2 of my phones to my younger, more inexperienced self (around 4 years ago), for one of the phones recovery and download mode became corrupted (inaccessible), and the other phone became a complete and utter "brick" (useless), it was unable to even be turned on!
My point is that if he had flashed a rom, or even worse; a stock firmware for his phone this can seriously kill it, I suggest asking him what rom and what model the rom was built for.
Update me once you find out.
Exanneon said:
Flashing a "wrong version" can be fatal to an android device, this has happened to 2 of my phones to my younger, more inexperienced self (around 4 years ago), for one of the phones recovery and download mode became corrupted (inaccessible), and the other phone became a complete and utter "brick" (useless), it was unable to even be turned on!
My point is that if he had flashed a rom, or even worse; a stock firmware for his phone this can seriously kill it, I suggest asking him what rom and what model the rom was built for.
Update me once you find out.
Click to expand...
Click to collapse
He said that he doesn't know exactly. He tried a few but all should have been for the GT-I9195.
Reply.
If all of them were for the GT-I9195, then please list them for me, or at least the last one that was flashed, as I can't help you if I'm told that everything was done correctly.
Sure
- I9195XXUCPE1 (https://www.sammobile.com/firmwares/galaxy-s4-mini/GT-I9195/NEE/download/I9195XXUCPE1/78908/)
- I9195XXSCQA3
- I9195XXUBML4-D-BT (4 files + PIT-file CSB_signed_SERRANOLTE_ONEPIT_OPEN_130523)
Reply.
So you haven't been flashing roms, but rather stock firmwares, what odin were you using?
Exanneon said:
So you haven't been flashing roms, but rather stock firmwares, what odin were you using?
Click to expand...
Click to collapse
My friend said that he initially flashed a Cyanogenmod rom and it worked but he didin't like it and the troubles started when he tried to revert to stock.
Odin version: 3.09
Thanks.
Reply.
That's unusual, flashing stock firmware is very unlikely to cause any problems but fix everything...Could you please give me the link to the stock firmware your friend was flashing? (If you have it)
standarggbg said:
Hi all!
I've got a bricked Samsung S4 mini.
It's stuck in a bootloop and I've got no recovery mode (No command with dead droid). Kies doesn't recognize it.
I've tried:
- flashing CWM and TWRP to get recovery mode up and running but no luck. Odin completes fine and it restarts (tried to enter on first reboot as described) but still "No command".
- flashing stock firmware from sammobile.com. I completes fine but when i restart its no difference (bootloop and no recovery)
- flashing stock firmware (all files with pit file) https://forum.xda-developers.com/showthread.php?t=2751224. This gets error in Odin and "SW REV CHECK FAIL: FUSED 2 > BINARY 0" in on the phone. I suspect its the wrong firmware.
In download mode:
Code:
CURRENT BINARY: Samsung Official
SYSTEM STATYS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
BOOTLOADER AP SWREV: 2
WRITE PROTECTION: Enable
I'm all out of ideas and would love some help. I've found some similar threads on this but no solution.
How do i find out exactly what model number I've got. The back says GT-I9195 and the Samsung Warrany site says "cant find product". I guess its because its a Scandinavian phone.
Any help much appreciated.
/Daniel
Click to expand...
Click to collapse
same problem. did you find any luck fixing your phone? wanna try it too if so :good:
He doesn't remember but think it was I9195XXSCQA3.
ddikere said:
same problem. did you find any luck fixing your phone? wanna try it too if so :good:
Click to expand...
Click to collapse
Nope. Not yet.

Samsung Note II Boot Loop

Hi,
I am facing boot loop issue on my N7100 from the time since I updated software.
My Note II motherboard went dead a long time ago so I thought to buy a new motherboard(International Version) from China which I received yesterday. I was able to install the board successfully, phone started working in normal condition, I was really Happy. Very soon, new software update popups started appearing which I decided to install one by one. Initial were some patches, then a big update came for around 800Mb which was for addition of KNOX and other features. The download was completed successfully & and I tried to Install it.
After the installation my phone went into boot loop. The Samsung logo comes and disappears and the cycle goes on.
> I am not able to get phone in recovery mode ( Vol Up+Home+Power).
> Yes, I am able to get phone in download mode (Vol Down+Home+Power).
Following is the status in download mode:
Product Name: GT-N7100
Custom Binary Download: No
Current Binary: Samsung Official
System Status: Custom
Knox Warranty Void: 0
AP SWREV: A2
I did try to re-install ROM using ODIN but failed.
ROM Link : https://www.needrom.com/server/download.php?name=/2017/09/KSA-N7100XXUFNL1-20150518112800.zip
Currently,
a) I don't know the details of motherboard ( S/N, Country Origin, PDA Number, CSC Number ).
b) Developer options were not enabled while phone was in working condition.
c) Tried my best to restore ROM but failed.
I need support to make this phone functional again. I need to know whether the board has gone faulty or can be repaired using software stuff?
Earliest response will be highly appreciated.
Thankyou so much!
Regards
Nikhil
Did you try to flash any non-Samsung software via Odin? I ask because I see the word "custom" in download mode.
What happens when you try to boot into recovery? What happens when you try to flash a stock ROM?
Try flashing a stock recovery from sammobile.com or updato.com.

Categories

Resources