Related
hello I have a tmobile s2 galaxy to blink to be root to odin not what went wrong and went on my PC that I needed to find this driver and install it QHSUSB try to put it into download mode but does nothing I connect it to pc and odin pc recognizes it and does nothing but flashing
is there any way to rescue thanks!
posting this in the development section. All of my why
i heard that posting in the right section helps resurrect deceased Galaxies
blackfix said:
hello I have a tmobile s2 galaxy to blink to be root to odin not what went wrong and went on my PC that I needed to find this driver and install it QHSUSB try to put it into download mode but does nothing I connect it to pc and odin pc recognizes it and does nothing but flashing
is there any way to rescue thanks!
Click to expand...
Click to collapse
I would help, but I need someone to help translate what you just said.
does your phone power on?
did you remove battery for 2 minutes and put it back in?
Wtf? Say that again? You tried to root using Odin butit either does not recognize the phone or just gets hung up?
Sent from my SGH-T989 using xda premium
blackfix said:
hello I have a tmobile s2 galaxy to blink to be root to odin not what went wrong and went on my PC that I needed to find this driver and install it QHSUSB try to put it into download mode but does nothing I connect it to pc and odin pc recognizes it and does nothing but flashing
is there any way to rescue thanks!
Click to expand...
Click to collapse
sad to say it, but your phone is dead...the driver your PC is asking for is the qualcom hardware interface driver.
there is a service to fix this type of brick, its around $50 - $80. did you try flashing the .pit file in the odin zip?
Sentence structure helps.
ufff es que nose nada de ingles pero hay voy ,yo intente hacerlo root y de momento odin se para y dice que fallo ok de momento la pc no lo reconoce yo cojo y le saco la bateria y trato de ponerlo en download mode pero el se queda en pantalla negra lo conecto al pc y sale que tengo que instalar uno driver como que no lo estaba reconociendo busco en google y en cuentro los driver lo instalo veo que odin lo reconoce y dise puerto 12 trate de flashar la rom de fabrica pero dice esperando por el dispositivo , e mirado todo sobre brick y nada de resucitarlo
Try this
blackfix said:
hello I have a tmobile s2 galaxy to blink to be root to odin not what went wrong and went on my PC that I needed to find this driver and install it QHSUSB try to put it into download mode but does nothing I connect it to pc and odin pc recognizes it and does nothing but flashing
is there any way to rescue thanks!
Click to expand...
Click to collapse
Try this, maybe it'll help you.
http://forum.xda-developers.com/showthread.php?t=1332103
*Remember the thanks button if it helps*
glensta said:
Try this, maybe it'll help you.
http://forum.xda-developers.com/showthread.php?t=1332103
*Remember the thanks button if it helps*
Click to expand...
Click to collapse
Yeah Sounds Like He Needs To Learn To Use Odin First Before Sending His Phone To Mobile Tech Videos On Case Of Hard Brick...
blackfix said:
ufff es que nose nada de ingles pero hay voy ,yo intente hacerlo root y de momento odin se para y dice que fallo ok de momento la pc no lo reconoce yo cojo y le saco la bateria y trato de ponerlo en download mode pero el se queda en pantalla negra lo conecto al pc y sale que tengo que instalar uno driver como que no lo estaba reconociendo busco en google y en cuentro los driver lo instalo veo que odin lo reconoce y dise puerto 12 trate de flashar la rom de fabrica pero dice esperando por el dispositivo , e mirado todo sobre brick y nada de resucitarlo
Click to expand...
Click to collapse
English.
Sent from my SGH-T989 using xda premium
BaconStep said:
English.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
phew is that nose no English but there I go, I try to do when odin root and stops and says ok for now ruling the pc does not recognize me lame and I take the battery and try to put it into download mode but is is in black screen I connect it to pc and out I have to install a driver as he was not seeking recognition and encounter on google I install the drivers I see odin design recognizes and try port 12 Flashar factory rom but says waiting for the device, and looked all over and nothing to resurrect brick
------------------------------------------------------------------------
Ok mira para que te puedan ayudar mas usa esta pagina en general si traduce la mayoria de las cosas
http://translate.google.com/
-----------------------------------------------------------------------
otra cosa que botones estan haciendo apretados antes de connectar a la computadora? y cual systema estas intentando poner nesesito todos los detalles incluyendo las paginas y todo el processo que estas haciendo......
byt3b0mb said:
sad to say it, but your phone is dead...the driver your PC is asking for is the qualcom hardware interface driver.
there is a service to fix this type of brick, its around $50 - $80. did you try flashing the .pit file in the odin zip?
Click to expand...
Click to collapse
Not Really Needed As Long As It Turns On At Leasts To The Samsung Screen Or Vibrates, Etc... He Said It Can Go Into Download Mode I Think And That Odin Recognizes It...
hayn_pryde46 said:
Not Really Needed As Long As It Turns On At Leasts To The Samsung Screen Or Vibrates, Etc... He Said It Can Go Into Download Mode I Think And That Odin Recognizes It...
Click to expand...
Click to collapse
yes to me it sounds like hes not pressing the right buttons to boot into download mode...
-----------------------------------------------------------------------------------------------------------
mis recomendaciones son estas....
1.Driver ---> http://www.mediafire.com/?6onrjbyd46j4lhj
2.Odin ----> http://www.mediafire.com/?u868rqz4qn0ta34
3.Recovery > http://www.mediafire.com/?5bktv62yoyh3wim
4.Rom ----->http://forum.xda-developers.com/showthread.php?t=1322642 <------- despues de installar recovery descargas este y lo pones en el root de tu memoria.
Source:
http://forum.xda-developers.com/showthread.php?t=1311194&page=70
http://forum.xda-developers.com/showthread.php?t=1322642
dtddemon said:
yes to me it sounds like hes not pressing the right buttons to boot into download mode...
Click to expand...
Click to collapse
Tell him To Hold Volume Buttons And Plug Usb In And Ask What Happens? I Had Two Hard Bricks One For The Vibrant And For An Att GS II...
The Only Ways I Know Of Is Messing With Bootloaders Or A Recovery Freeze While Deleting Partitions...
hayn_pryde46 said:
Tell him To Hold Volume Buttons And Plug Usb In And Ask What Happens? I Had Two Hard Bricks One For The Vibrant And For An Att GS II...
Click to expand...
Click to collapse
yea bro i told him to break it down of what hes doing to ping point what he is doing wrong, and pretty much the instructions on how to do it lol. well see what he says.
Here's another thread that could help ya - good luck bro. I know what's it's like bricking a phone. When I had a Vibrant, I bricked 6 different vibrants until I finally learned how to search and read, cuz that was embarrassing returning to the store and looking at the facial expressions on the employees.
http://forum.xda-developers.com/showthread.php?t=1414341
Buena Suerte !
hayn_pryde46 said:
Not Really Needed As Long As It Turns On At Leasts To The Samsung Screen Or Vibrates, Etc... He Said It Can Go Into Download Mode I Think And That Odin Recognizes It...
Click to expand...
Click to collapse
he says he has a black screen.
We need a more detailed description.. DID IT WORK BEFORE? because it sounds like he never even got to flashing anything.
Teo032 said:
he says he has a black screen.
We need a more detailed description.. DID IT WORK BEFORE? because it sounds like he never even got to flashing anything.
Click to expand...
Click to collapse
Did He Try Pulling Everything Including Sim And Memory Card Wait a Little While Plug Usb In Hold Volume Up And Down Replace Battery ( Without Memory Card And Sim ) If That Doesnt Work He Had A Hard Brick... Thats My Last Check Or A Usb Jig... Does It At Least Have The Soft Brick Triangle And Odin Reads The Phone (Like Com 5 Or Something)?
Ohhhh goddd...cant...control...hulk smash
"Asshole mode activated"
I think you should get you a translator to follow you around bro.
I think My badass hercules almost overheated trying to translate what you said.
Tried over in another forum, got no help.... Hoping someone here has an idea.
A local seller sometimes has phones and I bought an Arc S that worked great recently. Last week he has a Play so I picked it up from him cheap.
This phone is dead. Really dead. No lights, no beeps, no screen activity. Absolutely no reaction to being plugged in on the phone or on the PC (checked under flashtools, PC companion and EMMA).
I opened the phone and checked for water or drop damage, there is none.
I have tried all different USB cables and chargers, including ones that work on my Arc S just fine. I also re-flowed the solder on the USB connector when it was open (I had tried charging previously with no results). The micro USB port looks good. The battery also looks ok, it has no swelling or damage and is a genuine Sony battery.
I hate to put so much effort into it, but I have old phones that have been drowned in salt water and left to rust and they still have SOME response, or phones that have literally been smashed that will at least light the notification light. Seems odd to have this Play do nothing at all.
Any other tricks I can try with this thing?
Anybody? Anything? Wonder why posts that ask something easily Google'able/searchable get 50 responses, legit questions seem to get ignored.
Either mainboard broken or battery totally drained. Try charging the battery with an external charger? Not sure if it works but worth a try
jeff7424 said:
Either mainboard broken or battery totally drained. Try charging the battery with an external charger? Not sure if it works but worth a try
Click to expand...
Click to collapse
Thanks. Do you know if the Play will do anything at all if the battery is removed but it is connected to USB? I know the Arc will loop the logo.
If not I'll order a battery, if it should be flashing or showing the logo without the battery then I'll assume a bad MB.
I don't have an answer but... I hope this helps...
I have the same problem, my xperia play is/was totally new, i did a kernel flash with flashtool everything was succesful acording with the status window of flashtool, but when I unplug it and tried to turn it on... dead, totally not even a single glimpse of life, not even the notification led.
I hope you and I find a way to bring it back to life... It was only a few hours since it's firts turn on :crying:
New development....
Was about to order a battery/charger for it and remembered I had an old camera battery charger around. Got the prongs lined up right and got a charge on the battery.
Unfortunately all the phone does is vibrate as soon as the battery goes in, and it continues to vibrate no matter what is pressed... and would keep doing it till the battery dies. So at this point I'm guessing bad motherboard.
My battery was full when I did the kernel flash, I plugged it to charge the battery after the incident.
Have you tried to flash a new kernel? I did, but it doesn't respond when I plug it with the back button pressed...
---------- Post added at 05:59 AM ---------- Previous post was at 05:39 AM ----------
jaxmoto said:
New development....
Was about to order a battery/charger for it and remembered I had an old camera battery charger around. Got the prongs lined up right and got a charge on the battery.
Unfortunately all the phone does is vibrate as soon as the battery goes in, and it continues to vibrate no matter what is pressed... and would keep doing it till the battery dies. So at this point I'm guessing bad motherboard.
Click to expand...
Click to collapse
I read a post about some repair of SEMCboot with setool writing a new firmware, or something like that but I didn't understand what it means, here is the link:
I can't posts links so I going to quote:
Alejandrissimo
Miembro del foro
Compra y venta: (1)
Fecha de Ingreso: feb 2011
Localización: Mexico
Mensajes: 69
Modelo de smartphone: Galaxy SIII, Galaxy Note, iPad 3
Versión de ROM: 4.1.1
Tu operador: TELCEL
Reparar Xperia Play Bricked (Luz Roja) (aunque no lo reconozca la PC)
Hola, se me ocurrio crear este tema para ayudar a la comunidad en medida de lo posible.
Veran, hay ocaciones en que durante un mal proceso de flasheo o liberacion o simple mala suerte nos encontramos con que nuestro Xperia no enciende mas y no podemos revivirlo con el flashtool o el pc companion ya que la computadora no detecta el telefono o lo decta como dispositivo desconocido.
SETool es un herramienta poderosa que entre otras cosas puede reparar el SEMCboot de los Xperia, esto es lo que se necesita arreglar para que el telefono vuelva a ser dectecado por flashtool y asi reescribirle el firmware.
Basicamente el proceso es sencillo.
1. Se repara el SEMCboot por testpoint y alternative bypass con SETool.
2. Se escribe un firmware nuevo y fresco con SETool o flashtool.
Listo eso es todo y el movil queda vivito de nuevo.
Lo peor que puede pasar despues de revivirlo es que no acepte ningun SIM. Esto no suele pasar a menos de que el problema estuviera desde antes de revivirlo. Sin embargo es facil de arreglar, aunque desafortunadamente no hay manera gratuita de hacerlo ya que para este particular proceso el setool necesita creditos de servidor.
Volviendo al tema. El proceso de Recovery (como se le conoce) necesita de setool que a su vez require tener SETool box o dongle conectada, la cual como se imaginan no es gratuita ni barata.
Sin embargo ofresco este servicio de Recovery sin costo a los amigos de HTCMania.
Asi mismo se aceptan donaciones alegremente
Maybe you can investigate some more about it...
Hi Guys,
I have a very strange issue in my grand past 3 days i notice that in night when my phone is not in use idle and in morning when press the power key to wake the phone its completely dead it doesn't respond, i have to remove and reinsert the battery and after that phone works normal, then again next day same issue,
Is any one having the same issue.
ROM?
Rooted?
Hi Guys,<br />
<br />
I have a very strange issue in my grand past 3 days i notice that in night when my phone is not in use idle and in morning when press the power key to wake the phone its completely dead it doesn't respond, i have to remove and reinsert the battery and after that phone works normal, then again next day same issue, <br />
<br />
Is any one having the same issue.
Click to expand...
Click to collapse
Maybe it was software problem. :what:
Sent from my GT-I9082 using xda premium
IM on stock rom
xenon92 said:
ROM?
Rooted?
Click to expand...
Click to collapse
Xenon_Izec said:
Maybe it was software problem. :what:
Sent from my GT-I9082 using xda premium
Click to expand...
Click to collapse
IM on stock rom :angel:
hellraiser said:
IM on stock rom :angel:
Click to expand...
Click to collapse
I hope you have tried everything by searching on google.
Last resort - try a factory reset.
Your contacts are backed up on google. Signing in again on the phone after factory reset will bring your contacts back.
For backing up your app data. Use Helium
If after factory reset also things dont get resolved, take it to the service center.
Hello I have the same problem, my phone is new, 1 day use.
When I switch off the screen after some minutes dosnt recieve whatsapp, when I switch on the screen all notification appear.
It happends always when I use wifi and sometimes in 3G.
There are solution?, is a general problem for this phone?.
Thanks.
version anbdroid 4.1.2
kernel 3.0.31-1088096
[email protected]@1
compilation JZO54K.I9082XXAMF3
Solved, this is the solution in my phone.
Solución confirmada, en mi caso, me di cuenta por casualidad, en un punto de acceso que tengo sucedía que al apagar pantalla pasados unos minutos no recibida notificaciones de nada, pues por un causal se me conectó al otro punto de acceso y en ése no pasaba. Solo me pasaba en el primero, es un conceptronic algo más viejo.
Puede ser que el problema sea de algunos ap / routers que no se llevan bien con el teléfono.
He puesto otro punto de acceso tplink y perfecto, creo que es lo que le puede pasar a todo el mundo.
Hi everyone,
I have a big problem since yesterday, I am under the version Miui 11 Android 10 rooted under TWRP unofficial and I wanted to install a Rom Custom, I of which wanted to install the official version of TWRP, when I have Flash Recovery Recovery.img after restarting... BLACK SCREEN I could not have returned to FASTBOOT mode and in RECOVERY only the NOTIFICATION which is on, when I stay press POWER + VOLUM UP I have a SOUND on PC like what the PHONE is connected for 5 SECONDS after it DISCONNECTS, so I followed a tutorial to open my phone and disconnect my BATTERY... always the same problem :/
if you can help me please :/
I would like to specify that I never know that when I wanted to put the official version of TWRP my phone was around 30% ... ?
Thanks you.
Test Point
Tiix31Dev said:
Hi everyone,
I have a big problem since yesterday, I am under the version Miui 11 Android 10 rooted under TWRP unofficial and I wanted to install a Rom Custom, I of which wanted to install the official version of TWRP, when I have Flash Recovery Recovery.img after restarting... BLACK SCREEN I could not have returned to FASTBOOT mode and in RECOVERY only the NOTIFICATION which is on, when I stay press POWER + VOLUM UP I have a SOUND on PC like what the PHONE is connected for 5 SECONDS after it DISCONNECTS, so I followed a tutorial to open my phone and disconnect my BATTERY... always the same problem :/
if you can help me please :/
I would like to specify that I never know that when I wanted to put the official version of TWRP my phone was around 30% ... ?
Thanks you.
Click to expand...
Click to collapse
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
javizeta said:
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
The first time it crashed I revived it waiting for the battery to drain (post # 196) and now I have it back
to briquet when flashing wrong twrp and I have not waited for it to be exhausted again but I have done it
with a test point.
In photos two and three I show you where you have to connect the cable and privately I send you a link to an explanatory video
because I don't know if I can put links to youtube here.
It worked perfectly for me on the first try.
Click to expand...
Click to collapse
hey how to do me a favor pass the tutorial because I have the same problem:fingers-crossed:
maikiller said:
hey how to do me a favor pass the tutorial because I have the same problem:fingers-crossed:
Click to expand...
Click to collapse
I used the google search engine: tutorial to unbrick Chinese MTK phone and in the results I chose the Azlan Laion video.
Utilicé el buscador de google: tutorial desbrickear telefono MTK chino y en los resultados elegí el video de Azlan Laion.
Updated post # 2
Read please
Actualizado post #2
Leer, por favor
I definitely would appreciate anything that would get this flash to go through... I already have mine apart and have been trying everything to get it unbricked with no success as of yet...
Sent from my Redmi Note 8 Pro using XDA-Developers Legacy app
javizeta said:
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
Click to expand...
Click to collapse
----------
Your method does not work because it depends on the motherboard you are using, for example the Mediatek uses another type of test point and they are blocked, I think that is why Xiaomi does not want to give more support to the Xiaomi Redmi Note 8 Pro (Begonia) as devices!
I have tried it several times and it does not work, the only thing is a working method is: Having the volume up pressed until the Mode Flash mode is activated and with the SP Flash Tool. The problem is that it asks for an Authorized Account and it is what I am looking for (of course to payment)
The Procedure
0. Unzip your device's firmware.
1. Install MiFlashPro.
2. Navigate to (installation_directory)/MiFlashPro/SP_Flash_Tool/mi and run "account_auth.exe" (Run as administrator). In the window that opens, log in with an authorized Xiaomi Account.
3. Navigate to (installation_directory)/MiFlashPro/SP_Flash_Tool nad run "flash_tool.exe". The SP_Flash_Tool interface opens. Now you have to select the 3 files:
Download-Agent: (installation_directory)/MiFlashPro/SP_Flash_Tool/MTK_AllInOne_DA_mt6765_mt6785.bin
Scatter-loading File: You will find this one on your stock rom folder, especially on the folder called "images".
Authentication File: (installation_directory)/MiFlashPro/SP_Flash_Tool/auth_sv5.auth
4. Press the "Download" button.
5. Connect the USB cable to your PC but NOT YET to your phone.
6. Hold the vol+ button on your phone pressed and NOW connect the cable to it.
7. The program should now react and start the flashing process without giving an error.
8. Wait for the flashing process to end and enjoy!
javizeta said:
I am writing this for anyone to use at their own risk, it is not complicated.
Once updated from Indonesia Miui 11 Android 9 rom to Android 10 and installed a recovery incorrectly and I have returned to
lock my Redmi Note 8 Pro (Begoña) and this time I have not waited for the battery to drain as in the previous one (post # 196)
I have used the Test Point method.
This is what I have done:
-Copied the folder from the Indonesian rom V10.4.2.0, once the zip is unzipped, in Computer> C
-Installed SP Flash Tool v5. 1924 Win also in C
-Removed the back of the mobile and removed the housing that is above the battery (Photo 1).
-Prepared a piece of fine copper wire, I have connected one end to a screw on the mobile plate making ground (Photo 2) and to
the other end I have connected a nail (Photo 4) .Then I have opened the Flash Tool and I have put the scatter that
*it is in the "images" folder of the rom that I had copied in C, and the DA and the authentication file that is in it
*Flash Tool folder and I have connected the usb cable to the mobile, only to the mobile.
-I pressed "Download Only" and connected the other end of the copper cable, prepared with a nail, in the
*point Kcol0 (Photo 3) and I have connected the usb cable to the computer. The bottom bar of the FlashTool has started to fill in
*color red first and then change color until the "Download Ok" symbol appears
*I have done it with the battery disconnected (others say it is connected) and with all the files marked on the
*Flash Tool (others say that you only have to mark the preolader) and it has worked for me.
*
After a few minutes the mobile has started with MIUI 10 and Android 9, as expected by the rom with which I have done it and
then I have already installed MIUI 11 and then I have updated to Android 10, both with MiFlash20191206 of Xiaomi. To finish
installing the appropriate recovery, this time yes, and doing root
If you have disconnected the battery, open the phone as in photo 1 of the three that I attach.
Esto lo escribo para que lo use quien quiera siempre bajo su propia responsabilidad, no es complicado.
Una vez actualizado de rom Indonesia Miui 11 Android 9 a Android 10 e instalado un recovery de forma incorrecta y he vuelto a
bloquear mi Redmi Note 8 Pro (Begoña) y esta vez no he esperado a que se agote la batería como en la anterior (post #196)
sino que he usado el método del Test Point.
Esto es lo he hecho:
-Copiado la carpeta de la rom de Indonesia V10.4.2.0, una vez descomprimido el zip, en Equipo > C
-Instalado SP Flash Tool v5. 1924 Win también en C
-Desmontado la trasera del móvil y quitado la carcasa que hay por arriba de la batería (Foto 1).
-Preparado un trozo de cable fino de cobre, un estremo lo he conectado a un tornillo en la placa del móvil haciendo masa(Foto 2)
y al otro extremo le he conectado un clavo (Foto 4).luego he abierto el Flash Tool y he puesto el scatter que
hay en la carpeta "images" de la rom que que había copiado en C, y el DA y archivo de autentificación que hay en la propia
carpeta del Flash Tool y he conectado el cable usb al móvil, solo al móvil.
-He pulsado "Download Only" y he conectado el otro extremo del cable de cobre, preparado con un clavo, en el
punto Kcol0 (Foto 3) y he conectado el cable usb al ordenador. La barra de abajo del FlashTool ha empezado a rellenarse en
color rojo primero y luego cambia de color hasta que aparece el simbolo "Download Ok"
Lo he hecho con la batería desconectada (otros dicen que conectada) y con todo los archivos marcados en el
Flash Tool (otros dicen que sólo hay que marcar el preolader) y me ha funcionado.
Después de unos minutos se ha iniciado el móvil con MIUI 10 y Android 9, como era de esperar por la rom con la que lo he hecho y luego ya le he instalado
MIUI 11 y después he actualizado a Android 10, los dos con MiFlash20191206 de Xiaomi. Para terminar instalando el recovery
apropiado, esta vez sí, y haciendo root
Click to expand...
Click to collapse
excuse me , could u wirte in english on these pictures , i can not read ur Lang, please,:highfive::highfive: please
gadmei.tw said:
excuse me , could u wirte in english on these pictures , i can not read ur Lang, please,:highfive::highfive: please
Click to expand...
Click to collapse
These are the texts included in the photos translated into English using the google translator
Photo 2: It is to this screw that I have attached one end of the cable
Photo 3: Upper label: To this round contact you have to connect the other end of the cable
Bottom epigraph: It is just above the battery connector. Battery disconnected.
javizeta said:
These are the texts included in the photos translated into English using the google translator
Photo 2: It is to this screw that I have attached one end of the cable
Photo 3: Upper label: To this round contact you have to connect the other end of the cable
Bottom epigraph: It is just above the battery connector. Battery disconnected.
Click to expand...
Click to collapse
thank u!
i will try through these point
need video please/necesito el video por favor
hi budy, how could you send me the video?, i got the same problem with my redmi note 8 pro
Hola amigo, espero que te encuentres bien, ¿Como podrías enviarme el video?, tengo el mismo problema con mi redmi note 8 pro, se apagó y no ha encendido
leandro iván said:
hi budy, how could you send me the video?, i got the same problem with my redmi note 8 pro
Hola amigo, espero que te encuentres bien, ¿Como podrías enviarme el video?, tengo el mismo problema con mi redmi note 8 pro, se apagó y no ha encendido
Click to expand...
Click to collapse
What video are you referring to?
Tengo un xiaomi redmi 7 estaba en modo fastboot, en el momento de la instalacion del firmware se me desonecto el cable usb y quedo la pantalla en negro, supongo que es modo EDL porque la notebook me lo reconoce en 9008 (COM4), les agradecesia si me pudieran guiar par poder recuperarlo.
MOD EDIT: Please post only in English according to the FORUM RULES or at least add an English translation below your foreign language(Google translator for example), translation added below:
I have a xiaomi redmi 7 was in fastboot mode, at the time of the installation of the firmware I desonecto the usb cable and the screen is black, I guess it is EDL mode because the notebook recognizes it in 9008 (COM4), I would thank you if you could guide me to be able to recover it.
Gnar43 said:
Tengo un xiaomi redmi 7 estaba en modo fastboot, en el momento de la instalacion del firmware se me desonecto el cable usb y quedo la pantalla en negro, supongo que es modo EDL porque la notebook me lo reconoce en 9008 (COM4), les agradecesia si me pudieran guiar par poder recuperarlo.
MOD EDIT: Please post only in English according to the FORUM RULES or at least add an English translation below your foreign language(Google translator for example), translation added below:
I have a xiaomi redmi 7 was in fastboot mode, at the time of the installation of the firmware I desonecto the usb cable and the screen is black, I guess it is EDL mode because the notebook recognizes it in 9008 (COM4), I would thank you if you could guide me to be able to recover it.
Click to expand...
Click to collapse
If you have mac operating system then i think it is easy to flash fasboot rom through it but if you have windows also you can flash files chek in youtube to flash through windows or you can download fastboot official firmware from internet and flash with mac with easy steps
Rashik lama said:
If you have mac operating system then i think it is easy to flash fasboot rom through it but if you have windows also you can flash files chek in youtube to flash through windows or you can download fastboot official firmware from internet and flash with mac with easy steps
Click to expand...
Click to collapse
bro say it's easy.if realworld need edl auth account.not found for redmi 7 no neeed auth loader firehose.