Develop Bugs

[Q] Error lg mobile support tool

Hello everyone I have a problem with LG Mobile Support Tool.
Every time I follow a guide for unbrick my phone gives me this error:
Please disconnect the cable from your cell phone in order and remove and connect the battery.
Power on your cell phone and press the Restart button to resume update.
If LG Support Tool is stopped abnormally, try with [Options] - [Upgrade Recovery] in the tool menu.
The error is when it comes to 13-15%
I tried to reinstall it but nothing changes.
has anyone had this problem and how did you solve it?
goodbye
sorry for my bad english :/

Yeah,kdz updater. If you have an aosp rom installed,lg mobile tool won't work. Click my signature and read there
Sent from my EchoEd GT-I9505/smart phones,dumb people.

Did you end up getting this fixed?
I have the same problem. Did you end up getting this resolved? If so what did you do?

oaksu said:
I have the same problem. Did you end up getting this resolved? If so what did you do?
Click to expand...
Click to collapse
me too

oaksu said:
I have the same problem. Did you end up getting this resolved? If so what did you do?
Click to expand...
Click to collapse
crizalid8 said:
me too
Click to expand...
Click to collapse
Do you guys have acces to recovery mode?
If so, then you should be able to flash a custom rom through adb sideload function.
If not, then either of these threads might help you out:
http://forum.xda-developers.com/showthread.php?t=2010624
http://forum.xda-developers.com/showthread.php?t=2249500

howaboudno said:
Do you guys have acces to recovery mode?
If so, then you should be able to flash a custom rom through adb sideload function.
If not, then either of these threads might help you out:
http://forum.xda-developers.com/showthread.php?t=2010624
http://forum.xda-developers.com/showthread.php?t=2249500
Click to expand...
Click to collapse
problem solved
I used lg flash tool
select type: CDMA
phone mode: CS_EMERGENCY
CSE Flash
sorry for my bad english

Unbrick bricked by writing boot.img to wrong mmcblk

Hello community members,
TL;DR no adb, no fastboot, no flashmode, no QDloader (or similar) ... how to unbrick it?
I was trying to force Android to allow lower lcd backlight brightness levels by patching framework-res.apk and I had the edited zip file ready to flash. Then I realized that my Android 7 Ressurection remix ROM (thread) flashed Cyanogenmod recovery, which I don't like. So I decided to reflash TWRP 3.0.2 (link) ( edit: using "fastboot flash boot twrp.img", which was almost fatal mistake) and it has gone almost well. The phone started to boot into recovery mode everytime (and took a long time doing so). So I googled a bit and found this thread which lead me to this thread. I was looking forward to seeing my display brightness at lower than default values, so I probably skipped some security checks and texts with red color, so I flashed the zip with the boot.img replaced. After flashing I chose reboot and nothing happened since.
The problem is I flashed something that was not for my device (extracted boot.img to wrong mmcblk). The command that bricked my phone is (from META-INF/com/google/android/updater-script):
Code:
package_extract_file("boot.img", "/dev/block/mmcblk0p6");
After that it doesn't boot, doesn't light up LED (even when charging), doesn't get detected by PC in any state.
So I have no adb, no fastboot and no flashmode and not even a QDloader or similar mode.
Is there a way to unbrick it?
EDIT: How to unbrick it using JTAG interface? If I find somebody that has the required equipment, what data do I need to give them?

Hey there! Did you manage to solve the issue, because I just got into the same situation after the zip didn't save the corrected partitions but the initial ones... So i ended up without any signs of life in my phone

valkata752 said:
Hey there! Did you manage to solve the issue, because I just got into the same situation after the zip didn't save the corrected partitions but the initial ones... So i ended up without any signs of life in my phone
Click to expand...
Click to collapse
Nope, I found no solution ... even some kind of Qualcomm flashing mode via COM (serial port over USB) does not show up nowhere. I gave up and bought a used S5 mini, which is full of features I appreciate.
I'm gonna keep this Xperia M for some time if some solution comes up.

hi , can you boot into recovery ? ..if yes, i can maybe help

olibub said:
hi , can you boot into recovery ? ..if yes, i can maybe help
Click to expand...
Click to collapse
No, as I said, the phone does not react on anything. I would be able to put it back together if this was possible.

mik13ST said:
No, as I said, the phone does not react on anything. I would be able to put it back together if this was possible.
Click to expand...
Click to collapse
:/ this will be a problem... try look here http://rootmyandroid.org/how-to-unbrick-your-android-device-the-ultimate-guide.html/
and find this article "Unbrick any android device with Once Click Unbrick tool"

mik13ST said:
No, as I said, the phone does not react on anything. I would be able to put it back together if this was possible.
Click to expand...
Click to collapse
can you still access fastboot mode? anyway you need to know first what is exactly partition that you overwrite with boot.img :/
. That was really critical -_-

olibub said:
:/ this will be a problem... try look here http://rootmyandroid.org/how-to-unbrick-your-android-device-the-ultimate-guide.html/
and find this article "Unbrick any android device with Once Click Unbrick tool"
Click to expand...
Click to collapse
Nice looking tutorial, but I cannot find any download link for that One Click Unbrick Tool in that article. I doubt it would work, they are not explaining what it does.
Nicklas Van Dam said:
can you still access fastboot mode? anyway you need to know first what is exactly partition that you overwrite with boot.img :/
. That was really critical -_-
Click to expand...
Click to collapse
No, as I said. The partition that got overwritten was /dev/block/mmcblk0p6. It was overwritten by boot.img from LG OPTIMUS 3D that I link to in the main post.

here you can download unbrick tool https://forum.xda-developers.com/showthread.php?t=1153310

olibub said:
here you can download unbrick tool https://forum.xda-developers.com/showthread.php?t=1153310
Click to expand...
Click to collapse
I don't think this has any chance that it will work.
"This Software:
Will work on all Samsung devices which use Odin3"

Do you know how to use Flashtool?
If so, did you already attempt flashing a ftf via Flashmode (Hold VolDown)?

PhoenixTwoFive said:
Do you know how to use Flashtool?
If so, did you already attempt flashing a ftf via Flashmode (Hold VolDown)?
Click to expand...
Click to collapse
I know what Flashtool is. I know what ftf is. I used it once I think.
But the phone does not boot into flashmode as I mention in the main post.

ZenFone 2 Bootloader problem. Need help.

I recently recoverd from a brick using the usual xfstk downloader asus flash tool ect... i think i quit the asus flash tool too early and it left me with a buggy android. my problem is. there is no bootloader! when i try get to it ( even through adb) theres nothing there! but theres a fully working android. I tried to use xfstk downloader again, and when it says "continuing to os" all it does is put me in android with no bootloader. I really want a way to fully wipe my device so i can start fresh again. Is this safe? is there a better way?

that's why i always recommend to use commands method to flash after xfstk. any ways enable developer option and usb debugging. then connect to pc and run command adb reboot recovery. most probably you will boot into recovery factory reset there and sideload latest firmware downloaded from asus website.
if you are rooted then you can flash bootloader via dd commands

sukhwant717 said:
that's why i always recommend to use commands method to flash after xfstk. any ways enable developer option and usb debugging. then connect to pc and run command adb reboot recovery. most probably you will boot into recovery factory reset there and sideload latest firmware downloaded from asus website.
if you are rooted then you can flash bootloader via dd commands
Click to expand...
Click to collapse
I tried to do the adb thing. and it just took me into the os
i am not rooted. is there any hope for me?

aceaidan said:
I tried to do the adb thing. and it just took me into the os
i am not rooted. is there any hope for me?
Click to expand...
Click to collapse
then do xfstk again and flash raw via commands

sukhwant717 said:
then do xfstk again and flash raw via commands
Click to expand...
Click to collapse
I know it sounds like allot, but can you tell me how to do these things. I'm a total noob and you sound like a nice guy.

sukhwant717 said:
then do xfstk again and flash raw via commands
Click to expand...
Click to collapse
Also the xfstk won't complete because when it says continuing to os. It just takes me back to android.

I recommend to use this guide
https://forum.xda-developers.com/showthread.php?p=68477856
It's the only way to get my ZE551ML run again.
After using xfstk, go forward without AsusFlashTool and do all steps manually as described in the guide. It helped me to get my bricked ZF2 run again with newest MM.
Good luck.

aceaidan said:
Also the xfstk won't complete because when it says continuing to os. It just takes me back to android.
Click to expand...
Click to collapse
here are few things you can do! wipeout ifwi on emmc. and then use latest MM ifwi on marshmallow. if still same open back panel of the phone disconnect battery connector and place small paper under connector leave it like 7 days and after that try xfstk again with original files

mobil_z said:
I recommend to use this guide
https://forum.xda-developers.com/showthread.php?p=68477856
It's the only way to get my ZE551ML run again.
After using xfstk, go forward without AsusFlashTool and do all steps manually as described in the guide. It helped me to get my bricked ZF2 run again with newest MM.
Good luck.
Click to expand...
Click to collapse
Can you please link me to the manual files for mm in stuck on the first stock android.

aceaidan said:
Can you please link me to the manual files for mm in stuck on the first stock android.
Click to expand...
Click to collapse
didnt get you point!
what does you mean by first stock android?
what files you are asking for MM?
what exactly you want to do?

aceaidan said:
Also the xfstk won't complete because when it says continuing to os. It just takes me back to android.
Click to expand...
Click to collapse
It may be a fault in some other guides by addressing in xfstk.
The right address is 0x80000807, some other guides show 0x800000807, one 0 too much!
The guide I linked to does it right.

sukhwant717 said:
didnt get you point!
what does you mean by first stock android?
what files you are asking for MM?
what exactly you want to do?
Click to expand...
Click to collapse
My acrossim running android 5.0 and I want my bootloader back and then I want the mm files like system.img ect... So I can get mm

aceaidan said:
So I can get mm
Click to expand...
Click to collapse
If you finally want to go to MM, you can install it directly if your phone is broken now. So you will get a very clean MM without messed up from updading from LP! Really recommend.

hey ,i have same problem with my asus zenphone 2 , had you got any perfect solution? please help!!
every time i tried to flash files using xfstk is show countinuing to os and then show error - enable to connect with device!!

redmi note 5 dead please help!

i bought redmi note 5 two month ago , yesterday i was watching youtube and a freeze happened so i rebooted than it was stacked on boot , i hard reset it and try wiped all data but the process stacked on 99.9% than i rebooted again and nothing happened , no boot no fastboot , it was dead and show qualcomm ........! on device manager . please help

Flash using boot points. You have to open the phone. This is the last resort.

method please

Benyahia Mohamed said:
method please
Click to expand...
Click to collapse
There is guide in this forum. Dont be lazy to search. Qfil method

Benyahia Mohamed said:
method please
Click to expand...
Click to collapse
First try this method: https://forum.xda-developers.com/re...ccessful-redmi-note-5-pro-bypass-edl-t3843173
If this won't help, then you'll be forced to go into edl mode using pins on the motherboard.

Benyahia Mohamed said:
method please
Click to expand...
Click to collapse
me too - are you fix it ?? my note 5 dead

Verity. said:
First try this method: https://forum.xda-developers.com/re...ccessful-redmi-note-5-pro-bypass-edl-t3843173
If this won't help, then you'll be forced to go into edl mode using pins on the motherboard.
Click to expand...
Click to collapse
i tried the first methode and not working
what is the edl mode?

Benyahia Mohamed said:
i tried the first methode and not working
what is the edl mode?
Click to expand...
Click to collapse
Benyahya Can you contact with me in Facebook Just Write "OuahsSouneMido" And send me Request

Benyahia Mohamed said:
i tried the first methode and not working
what is the edl mode?
Click to expand...
Click to collapse
You must open the phone to use those pins. Just google how to enter edl mode unbrick.. etc. There are guides everywhere, you can even find guides on youtube, it's not very hard to search.

My Mi Note 8 Is Hard Bricked

Hey thank you for reading this my mi note 8 is hardbricked are there any ways to fix it
i tryed to install a stable rom with twrp i cant go to fastboot and recovery mode
Please help me
If you can help me with fixing this i could pay if you want
Greetings Jerano

Jerano said:
Hey thank you for reading this my mi note 8 is hardbricked are there any ways to fix it
i tryed to install a stable rom with twrp i cant go to fastboot and recovery mode
Please help me
If you can help me with fixing this i could pay if you want
Greetings Jerano
Click to expand...
Click to collapse
Did you try to use MiFlash tool? If you don´t want to use test point then probably you could enter to EDL using hardware buttons, in other Xiaomi devices that I owned the combination key was keeping pressed both volume buttons at same time (it´s an accuracy timing move) that you connect with PC, open device manager in windows and see if device is detected under Qualcomm HS-USB QDLoader 9008, install first the proper drivers https://www.themefoxx.com/2018/07/qualcomm-hs-usb-qdloader-9008-driver.html

SubwayChamp said:
Did you try to use MiFlash tool? If you don´t want to use test point then probably you could enter to EDL using hardware buttons, in other Xiaomi devices that I owned the combination key was keeping pressed both volume buttons at same time (it´s an accuracy timing move) that you connect with PC, open device manager in windows and see if device is detected under Qualcomm HS-USB QDLoader 9008, install first the proper drivers https://www.themefoxx.com/2018/07/qualcomm-hs-usb-qdloader-9008-driver.html
Click to expand...
Click to collapse
Now this method won't work as flashing in EDL mode requires you to have an authorized account which xiaomi provides only to the service centers.

the_weird_aquarian said:
Now this method won't work as flashing in EDL mode requires you to have an authorized account which xiaomi provides only to the service centers.
Click to expand...
Click to collapse
Have the same problem with the account.
Will there be any way to install without the account?

Demon6672 said:
Have the same problem with the account.
Will there be any way to install without the account?
Click to expand...
Click to collapse
nah man, only way is to visit service center if you're stuck on EDL mode without recovery or fastboot.

the_weird_aquarian said:
Now this method won't work as flashing in EDL mode requires you to have an authorized account which xiaomi provides only to the service centers.
Click to expand...
Click to collapse
Oops, I completely forgot this, all my previous devices didn´t need it (Mi Max, R5+, Mi8L, MiA2L). Anyway double check before to try something weird with this device, in many countries (including mine) no service center available for. Thx for the info.

@Jerano : I don't know the status of your phone, but take a look here : http://4pda.ru/forum/index.php?showtopic=973206&st=420#entry91980022
(use online translators)

SubwayChamp said:
Oops, I completely forgot this, all my previous devices didn´t need it (Mi Max, R5+, Mi8L, MiA2L). Anyway double check before to try something weird with this device, in many countries (including mine) no service center available for. Thx for the info.
Click to expand...
Click to collapse
Yes I know...it worked on previous phones...but now xiaomi has started this new thing to give authorized accounts only to service center...
fratellos said:
@Jerano : I don't know the status of your phone, but take a look here : http://4pda.ru/forum/index.php?showtopic=973206&st=420#entry91980022
(use online translators)
Click to expand...
Click to collapse
That won't work either... it's a different thing..if your system is destroyed you'll get an error and your phone will still be able to boot to fastboot....if your phone doesn't boot to fastboot then you can't flash vbmeta.img

the system has been destroyed? on your screen?

Lanzer0 said:
the system has been destroyed? on your screen?
Click to expand...
Click to collapse
flash fastboot rom with miflash tools.

raptorddd said:
flash fastboot rom with miflash tools.
Click to expand...
Click to collapse
[ERROR] missing files script?sorry my English

Lanzer0 said:
[ERROR] missing files script?sorry my English
Click to expand...
Click to collapse
extracted the fastboot file twice?? also check if fastboot file path has no spaces in patch name.. but for system destroyed you can just flash vbmeta and recovery no need to flash full fastboot rom

Jerano said:
Hey thank you for reading this my mi note 8 is hardbricked are there any ways to fix it
i tryed to install a stable rom with twrp i cant go to fastboot and recovery mode
Please help me
If you can help me with fixing this i could pay if you want
Greetings Jerano
Click to expand...
Click to collapse
Any errors on screen or something?..or just black screen nothing else?

I cannot enter fastboot or recovery mode and the only way is EDL, but when installing ask for the authorized account, my question is if it can be installed by EDL without an account

Demon6672 said:
I cannot enter fastboot or recovery mode and the only way is EDL, but when installing ask for the authorized account, my question is if it can be installed by EDL without an account
Click to expand...
Click to collapse
Unfortunately..the answer is no... previously it was possible..but now xiaomi has changed it...it requires authorized account for edl flashing which xiaomi provides only to service centers