Develop Bugs

[SCRIPT][BATCH][TOOL]Motorola Moto 360 Super Tool bootloader unlock, root, & Restore

[SCRIPT][BATCH][TOOL]Motorola Moto 360 Super Tool bootloader unlock, root, & Restore
Motorola Moto 360 Super Tool
View attachment 2962247
View attachment 2962248
WARNING USE THIS TOOL AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR ANY DAMAGE OR BRICKED DEVICES.
That Being said I have tested this on my device many times without any problems
Download the Super Tool HERE
Motorola Moto 360 Super Tool Options
1. Install adb and fastboot drivers from motorola and test them
2. unlock the bootloader of the watch
3. relock the bootloader of the watch
4. flash stock wear recovery image
5. flash stock wear boot image
6. restore your Moto 360 to stock KGW42N official
7. Root the Moto 360
8. flash TWRP recovery
9. boot to TWRP recovery from bootloader mode
VIDEO ON USING THIS TOOL
http://youtu.be/FMrywAnwqZ0
Latest Super Tool Version 5
CHANGE LOG
Version 1
based on KGW42N Firmware
Version 2
based on KGW42R Firmware
CLeaned up batch file script
Version 2.1
Added TWRP recovery
Added Lollipop Root with TWRP recovery and supersu.zip
Added boot to TWRP from Bootloader and removed boot to stock recovery from bootloader
Version 3
Based on LWX48T Firmware Lollipop android 5.0.1
Version 4
Based on LWX49L Firmware Lollipop android 5.0.2
Version 5
Based on LDZ22O Firmware Lollipop android 5.1.1
Requirements to use this Motorola Moto 360 Super tool
USB interface cable. if you need one watch this video on how to make it
Download the Super Tool HERE at RootJunkysdl.com
Know how to remove the watch band. check this VIDEO
May have a Video coming on how to use this tool soon

i downloaded version 2 and again it cannot send the boot.img
i tried to flash stock firmware and on the sending 'motoboot' it says FAILED data transfer failure (too many links)
The only thing i can do is lock and unlock the bootloader.

vincenzo697 said:
i downloaded version 2 and again it cannot send the boot.img
i tried to flash stock firmware and on the sending 'motoboot' it says FAILED data transfer failure (too many links)
Click to expand...
Click to collapse
It sounds like you didn't unlock your bootloader yet. That or your fastboot drivers are not installed. Run the driver test in the tool

The only thing i can do is lock and unlock my bootloader. Its weird because i follow all your steps

vincenzo697 said:
The only thing i can do is lock and unlock my bootloader. Its weird because i follow all your steps
Click to expand...
Click to collapse
I have a idea to clean up any problems you might be having. In my tool folder there is a program called rsdlite install it and then connect the device in bootloader / fastboot mode. Then it will show up in rsd lite. next select the XML file in the folder and flash the watch to factory. See if this fixes the problems

Tomsgt said:
I have a idea to clean up any problems you might be having. In my tool folder there is a program called rsdlite install it and then connect the device in bootloader / fastboot mode. Then it will show up in rsd lite. next select the XML file in the folder and flash the watch to factory. See if this fixes the problems
Click to expand...
Click to collapse
Thanks my friend. When I will go home I will try it and report back.

vincenzo697 said:
Thanks my friend. When I will go home I will try it and report back.
Click to expand...
Click to collapse
Good luck hopefully you have used rsd lite before.

Tomsgt said:
Good luck hopefully you have used rsd lite before.
Click to expand...
Click to collapse
I tried it but again it doesnt pass the first step. If you come with another idea please tell me.

Unfortunately, My comp doesnt reconize the watch. It just comes up with unreconized device. I have tried 2 diff cables, 3 diff comps, uninstalled, reinstalled drivers multiple times. ANY ideas what could be the issue??

suzook said:
Unfortunately, My comp doesnt reconize the watch. It just comes up with unreconized device. I have tried 2 diff cables, 3 diff comps, uninstalled, reinstalled drivers multiple times. ANY ideas what could be the issue??
Click to expand...
Click to collapse
manually install the motorola adb and fastboot drivers in device manager on the computer. the computer will say that they arent compatible but they will work.

Tomsgt said:
manually install the motorola adb and fastboot drivers in device manager on the computer. the computer will say that they arent compatible but they will work.
Click to expand...
Click to collapse
Well, where are the drivers????? I have the packages in the download, but there are no seperate drives. Thanks for the reply

suzook said:
Well, where are the drivers????? I have the packages in the download, but there are no seperate drives. Thanks for the reply
Click to expand...
Click to collapse
in device manager you will see update devices click it then click manually install. next look at both compatible and uncompatible drivers until you find the motorola drivers. then pick one if it works good and if not then try a different one.
Some times i have to install them manually like this. also make sure usb debugging is turned on on the moto 360 watch. the computer will not see it without this step.

Tomsgt said:
in device manager you will see update devices click it then click manually install. next look at both compatible and uncompatible drivers until you find the motorola drivers. then pick one if it works good and if not then try a different one.
Some times i have to install them manually like this. also make sure usb debugging is turned on on the moto 360 watch. the computer will not see it without this step.
Click to expand...
Click to collapse
Thanks, i have tried all that...im just about out of options.

suzook said:
Thanks, i have tried all that...im just about out of options.
Click to expand...
Click to collapse
Are you sure you are connecting the cable to the correct 4 pins on the watch? This can be confusing because if you flip it over to connect the cable the connections flip also.

Tomsgt said:
Are you sure you are connecting the cable to the correct 4 pins on the watch? This can be confusing because if you flip it over to connect the cable the connections flip also.
Click to expand...
Click to collapse
Yup, double checked wiring, pin, 3 diff comps, everything. Guess I wont have root if I can never get the proper drivers installed. Bummer, thanks for your time.

Hello
Download link is dead
upload new link pls

scumpicule said:
Hello
Download link is dead
upload new link pls
Click to expand...
Click to collapse
download link works fine try again

No more USB after Root??
I was able to unlock the BL and Root my Moto 360 with your tool, thank you very much for the "easy way"!! My concern is that now I cannot reconnect via USB. I have even made 2 more connectors and nothing, not even the USB connection sound. Is this a normal side effect? or did I screw it up? I'm leaning on user error because I was pulling the connector off the watch before unplugging it from the computer and it zapped, shut down the PC and rebooted the watch. Watch seems to be fine, no noticeable issues after it rebooted. So I dunno...

burkebacar said:
I was able to unlock the BL and Root my Moto 360 with your tool, thank you very much for the "easy way"!! My concern is that now I cannot reconnect via USB. I have even made 2 more connectors and nothing, not even the USB connection sound. Is this a normal side effect? or did I screw it up? I'm leaning on user error because I was pulling the connector off the watch before unplugging it from the computer and it zapped, shut down the PC and rebooted the watch. Watch seems to be fine, no noticeable issues after it rebooted. So I dunno...
Click to expand...
Click to collapse
you probably need to uninstall the device in device manager then let the drivers install again

Tomsgt said:
you probably need to uninstall the device in device manager then let the drivers install again
Click to expand...
Click to collapse
I'll give that a shot! Thanks
I'll report back with how it goes.

[Q] Missing bootloader

Hello all, I've made a bit of a balls up and appear to have deleted the bootloader on my G3 (D855) when I tried to install TWRP. Every time I start the phone or try to get in to the bootloader I end up on the TWRP screen. I have ADB access but I have no idea where to start to recover from this. I think I may installed twrp-2.8.0.0_d855-signed.img instead over the bootloader. Is that even possible?
Any help or advise will be greatly appreciated.
Cheers,
Peter

I do the Same things first time i flash twrp.
Reflash à kdz with flashtool save me.
Tapatalked

Actually, its not what I thought. I've managed to get in to the original bootloader. So the question is why is it taking me to TWRP screen all the time?

LonPete67 said:
Actually, its not what I thought. I've managed to get in to the original bootloader. So the question is why is it taking me to TWRP screen all the time?
Click to expand...
Click to collapse
if u flashed it via flashify maybe u chose kernel.img instead of recovery

I think you're right, but how do I get do I fix it? I've manged to reflash a ROM and it says it worked but I always end up at the TWRP screen after a reboot.

LonPete67 said:
I think you're right, but how do I get do I fix it? I've manged to reflash a ROM and it says it worked but I always end up at the TWRP screen after a reboot.
Click to expand...
Click to collapse
You've reflashed a kdz?
Btw, this should be in Q&A not in development

Please do not post non development related threads in the development section
Questions belong in the Q&A section
Thread moved

Klyupp said:
You've reflashed a kdz?
Btw, this should be in Q&A not in development
Click to expand...
Click to collapse
I've got the kdz file but I'm not sure how I would do that via ADB?

LonPete67 said:
I've got the kdz file but I'm not sure how I would do that via ADB?
Click to expand...
Click to collapse
You don't. Flash with flashtool

Klyupp said:
You don't. Flash with flashtool
Click to expand...
Click to collapse
I've been trying the the last 2 days to sort this out but have come against a stone wall. I've tried on 3 PCs and I cannot get the phone connected via USB (other than with ADB or MTP). To clarify my situation (as my initial post is probably incorrect)....I have manged to "replaced" the Android OS with a TWRP. Every time I start the phone I end up on the TWRP screen. I can boot in to the stock recovery. I have the correct KDZ file and Flash Tool but can't connect to the phone to re-flash.
Please, any help will be greatly appreciated.

What does it say on the PC when you plug it in?
Is it picked up in Device Manager?
Can you get in download mode?

Yep, its picked up as "G3" but with no drivers. I've downloaded and installed the LG unified drivers without any luck. From other pots I think I should be seeing it as "LGE AndroidNet USB Serial Port"?

Download mode? Not sure what you mean.

LonPete67 said:
Download mode? Not sure what you mean.
Click to expand...
Click to collapse
Now I know what download mode is! And yes, I'm in download mode now. The drivers have loaded!! Going to try a reflash now.

Thank you everybody who helped, the phone is working again! Clearly what I thought I knew does not match what I actually knew!!

LG G4 bootloop.... Need expert help... Ready to pay the price

Hello,
I had been using a H815T, locked bootloader, running Seven HD rom v6.1 for more than 2 months flawlessly. Suddenly yesterday my phone was in charge and it restarted and went into bootloop. Since I tried many things and I went to some local technicians as well as one LG engineer, but all failed to gimme any solution. And I don't have any warrenty, I couldn't ask for a replacement for anyone.
So here's what I tried:
1. Flashing international KDZ
2. Flashing default KDZ
3. Formatting from recovery mode
4. Changing battery
Here's what works:
1. Download mode
2. Recovery mode
So I am ready to pay if anyone gimme a solution out of this. Any help will be appreciated as I am in real trouble coz I cannot afford a new phone now.
With thanks

nipun1110 said:
Hello,
I had been using a H815T, locked bootloader, running Seven HD rom v6.1 for more than 2 months flawlessly. Suddenly yesterday my phone was in charge and it restarted and went into bootloop. Since I tried many things and I went to some local technicians as well as one LG engineer, but all failed to gimme any solution. And I don't have any warrenty, I couldn't ask for a replacement for anyone.
So here's what I tried:
1. Flashing international KDZ
2. Flashing default KDZ
3. Formatting from recovery mode
4. Changing battery
Here's what works:
1. Download mode
2. Recovery mode
So I am ready to pay if anyone gimme a solution out of this. Any help will be appreciated as I am in real trouble coz I cannot afford a new phone now.
With thanks
Click to expand...
Click to collapse
that block at 9% and told you to remove batery unplug phone etc etc?

i have same problem and no 2nd phone here -.- we need a Updated LG Flash Tool 2014 to flash the 20A.kdz

fr33kiLL said:
i have same problem and no 2nd phone here -.- we need a Updated LG Flash Tool 2014 to flash the 20A.kdz
Click to expand...
Click to collapse
unfortunaly we can wait a long time maybe ...

nipun1110 said:
Hello,
I had been using a H815T, locked bootloader, running Seven HD rom v6.1 for more than 2 months flawlessly. Suddenly yesterday my phone was in charge and it restarted and went into bootloop. Since I tried many things and I went to some local technicians as well as one LG engineer, but all failed to gimme any solution. And I don't have any warrenty, I couldn't ask for a replacement for anyone.
So here's what I tried:
1. Flashing international KDZ
2. Flashing default KDZ
3. Formatting from recovery mode
4. Changing battery
Here's what works:
1. Download mode
2. Recovery mode
So I am ready to pay if anyone gimme a solution out of this. Any help will be appreciated as I am in real trouble coz I cannot afford a new phone now.
With thanks
Click to expand...
Click to collapse
stock recovery or twrp..

Google~Android said:
stock recovery or twrp..
Click to expand...
Click to collapse
we have not access at twrp anymore .... and kdz method doesnt work . phone recognized in all lg software ... support tool 9% and issue

shudoha said:
we have not access at twrp anymore .... and kdz method doesnt work . phone recognized in all lg software ... support tool 9% and issue
Click to expand...
Click to collapse
did you have an unlocked bl or not?

Google~Android said:
did you have an unlocked bl or not?
Click to expand...
Click to collapse
of course for flash first twrp and after flash all autoprime files and after this .. impossible to have access at twrp . hard reset work . but nothing happens boot loop kdz for rollback doesnt work too . still blocked at 9% on the tool and 0 on my phone and ask me to remove the battery etc etc i did that too much time . but for nothing and the worst . bridge .. support tool recognize my phone like H815 then no driver problem

i have unlocked BL but didnt have access to ADB and Fastboot(idk why) and got stock recovery after flashing so no chance to go in TWRP

Does the phone freeze at random times? Like no matter where its at, sometimes it boots to the operating system?

Hardware
It's starting to sound more and more like a MEM BLOCK corruption..

Have you tried this: Firmware to Stock with kdz and tot?

Noo

shudoha said:
that block at 9% and told you to remove batery unplug phone etc etc?
Click to expand...
Click to collapse
No..nothing like that

mr turtle droid said:
It's starting to sound more and more like a MEM BLOCK corruption..
Click to expand...
Click to collapse
What's that and what's the remedy? And usually what causes it?

martinsavvy said:
Does the phone freeze at random times? Like no matter where its at, sometimes it boots to the operating system?
Click to expand...
Click to collapse
To me it used to happen sometimes while charging. I had to manually switch off the screen and when i switched on the screen, it became normal for a while. I thought it was due to heavy xposed customizations.

michael08071984 said:
Have you tried this: Firmware to Stock with kdz and tot?
Click to expand...
Click to collapse
That's the KDZ method. Yah I tried it as I mentioned.

michael08071984 said:
Have you tried this: Firmware to Stock with kdz and tot?
Click to expand...
Click to collapse
tested but like i told you .... blocked at 9% and remove battery unplug etc etc and nothing happend

Try this:
copy all zip files you need to reflash (10D or similar) to a memcard
Also download latest twrp and copy it to the directory where you have adb.exe
Open a Command prompt on your PC (where adb is located) and powerup the phone,
open up the Device Manager on your PC to see when the adb device is there,
in the moment where you see the adb device fire up the comand:
adb reboot bootloader
if that works enter the comand:
fastboot boot twrp-2.8.7.0-h815.img
this will boot directly into Twrp without flashing twrp and you can try things from twrp
I hope this will help here, helped me with the phone from a friend of me who had a similar problem.

fire3d said:
Try this:
copy all zip files you need to reflash (10D or similar) to a memcard
Also download latest twrp and copy it to the directory where you have adb.exe
Open a Command prompt on your PC (where adb is located) and powerup the phone,
open up the Device Manager on your PC to see when the adb device is there,
in the moment where you see the adb device fire up the comand:
adb reboot bootloader
if that works enter the comand:
fastboot boot twrp-2.8.7.0-h815.img
this will boot directly into Twrp without flashing twrp and you can try things from twrp
I hope this will help here, helped me with the phone from a friend of me who had a similar problem.
Click to expand...
Click to collapse
problem boot loop when i open my phone even with hard reset that change nothing and adb said : device not found when all program like lg support or bridge recognize my phone like h815 ... then not solution

Help me root this thing PLEASE

So here's the thing: I've just gotten hands on my G4, and I've been sitting here for 6 HOURS straight trying to root it, so I could install TWRP and then install CM13. But it's being F***** IMPOSSIBLE, I've tried loads of guides and tools and all I've got so far was a soft brick (which I managed to fix after a hard reset) and a big headache. Also, is there anyway I could root it on Android 6.0? Because when I tried to root it earlier I had to download this 1.4GB file that would literally take 10 hours to download. NOPE. Either I root it on Android 6.0 or anyone links me someplace else to download it, or it's not gonna happen. So anyway, any good sould would PLEASE explain me step by step how to do this? I used to mod phones a lot back in 2014 but it's been a while since I did it. My G4 is the H815.

TheBloodEagle27 said:
So here's the thing: I've just gotten hands on my G4, and I've been sitting here for 6 HOURS straight trying to root it, so I could install TWRP and then install CM13. But it's being F***** IMPOSSIBLE, I've tried loads of guides and tools and all I've got so far was a soft brick (which I managed to fix after a hard reset) and a big headache. Also, is there anyway I could root it on Android 6.0? Because when I tried to root it earlier I had to download this 1.4GB file that would literally take 10 hours to download. NOPE. Either I root it on Android 6.0 or anyone links me someplace else to download it, or it's not gonna happen. So anyway, any good sould would PLEASE explain me step by step how to do this? I used to mod phones a lot back in 2014 but it's been a while since I did it. My G4 is the H815.
Click to expand...
Click to collapse
There is an excellent guide right here on the forums:
http://forum.xda-developers.com/g4/general/howto-complete-guide-to-unlock-twrp-t3370003

Vseprz said:
There is an excellent guide right here on the forums:
http://forum.xda-developers.com/g4/general/howto-complete-guide-to-unlock-twrp-t3370003
Click to expand...
Click to collapse
>fastboot oem device-id
> waiting for any device
And it just stays like that...

TheBloodEagle27 said:
>fastboot oem device-id
> waiting for any device
And it just stays like that...
Click to expand...
Click to collapse
Are you using the stock cable and a usb 2.0 port? Did you install the drivers linked to in the guide?

Vseprz said:
Are you using the stock cable and a usb 2.0 port? Did you install the drivers linked to in the guide?
Click to expand...
Click to collapse
1. Yes
2. Not sure, I think all my USB ports are 3.0
3. Yes, installed the 15 sec adb drivers
Also, running win 10 x64
Edit: Yep, no 3.0 ports on my pc: http://imgur.com/shDGoFb

TheBloodEagle27 said:
1. Yes
2. Not sure, I think all my USB ports are 3.0
3. Yes, installed the 15 sec adb drivers
Also, running win 10 x64
Click to expand...
Click to collapse
Look at the port. If it is blue it is a 3.0. Try to find one that is not.

Vseprz said:
Look at the port. If it is blue it is a 3.0. Try to find one that is not.
Click to expand...
Click to collapse
Still nothing, tried all my usb ports

I FIGURED IT OUT: I needed to disable windows 10 driver signature, I did this by clicking on the windows icon, holding shift and pressing restart. Then going into troubleshoot, startup and pressing the 7 key, BOOM, got the fastboot oem device-id command working. Now when I try to unlock the bootloader it says that the LGH815P is not supported? NO WAY

ASUS Zenfone 2 Stuck on Logo

After looking online for solutions, I cannot get my device to boot up. It started when I tried to flash CM when it failed (BTW I used flashboot since my recovery couldn't work) Then I tried flashing the stock rom again but it did not work so I factory reset and my device couldn't boot and it would boot into recovery. I used adb to try to reflash firmware but it would always say remote permission denied I tried AFT but that screwed up everything. I couldn't use recovery and I only had access to bootloader. I then tried to reflash recovery, fastboot, and boot img and now my phone cannot access bootloader!:crying: I also tried xFSTK but it always returned with a fail. I deleted my only backup as it couldn't restore in CWM flashboot so now I'm stuck with a phone that cannot boot and would always loop the ASUS logo. My device model is ZE551ML. It was rooted prior to this.
UPDATE: My phone cannot turn on after flashing again with xFSTK. It only has a black screen even with hours of charging.
UPDATE 2:xFSTK has installed FW...... used wrong gp override value with 5 zeros instead of 4...
UPDATE 3: Used ADB to flash files onto phone and the phone is erasing with Android bot and reboots. Phone now works!

Did you try this https://forum.xda-developers.com/showthread.php?t=3452785
Sent from my ASUS_Z00A using Tapatalk

BlastZones said:
After looking online for solutions, I cannot get my device to boot up. It started when I tried to flash CM when it failed (BTW I used flashboot since my recovery couldn't work) Then I tried flashing the stock rom again but it did not work so I factory reset and my device couldn't boot and it would boot into recovery. I used adb to try to reflash firmware but it would always say remote permission denied I tried AFT but that screwed up everything. I couldn't use recovery and I only had access to bootloader. I then tried to reflash recovery, fastboot, and boot img and now my phone cannot access bootloader!:crying: I also tried xFSTK but it always returned with a fail. I deleted my only backup as it couldn't restore in CWM flashboot so now I'm stuck with a phone that cannot boot and would always loop the ASUS logo. My device model is ZE551ML. It was rooted prior to this.
Click to expand...
Click to collapse
xFSTK what error it gives? does it give storage programmer error?

I have tried every method. As I said above, xFSTK and ASUS Flash Tools do not work since I cannot access bootloader and xFSTK does not work

sukhwant717 said:
xFSTK what error it gives? does it give storage programmer error?
Click to expand...
Click to collapse
It just says OS and Firmware not installed and I cannot get it to boot to bootloader.

BlastZones said:
It just says OS and Firmware not installed and I cannot get it to boot to bootloader.
Click to expand...
Click to collapse
it must be giving error why not installed.. can you share log?

sukhwant717 said:
it must be giving error why not installed.. can you share log?
Click to expand...
Click to collapse
Where are the logs located? Also, Since I do not have the hanging wire (had one but solved it), it does not install the os since it keeps trying to connect to the device.

BlastZones said:
Where are the logs located? Also, Since I do not have the hanging wire (had one but solved it), it does not install the os since it keeps trying to connect to the device.
Click to expand...
Click to collapse
try using ifwi from latest stock MM firmware if fails then charge your device for few hours. then open back cover and remove battery connector. place some small paper connector so it does not make any connection. now keep it like this for few days. after 5 days try again you will solve continue to os waiting for device issue

sukhwant717 said:
try using ifwi from latest stock MM firmware if fails then charge your device for few hours. then open back cover and remove battery connector. place some small paper connector so it does not make any connection. now keep it like this for few days. after 5 days try again you will solve continue to os waiting for device issue
Click to expand...
Click to collapse
Could you provide a link to the MM bin files? Also, my model is the ZE551ML so I cannot get into the battery. I can stop it from looping but it just turns off.

BlastZones said:
Could you provide a link to the MM bin files? Also, my model is the ZE551ML so I cannot get into the battery. I can stop it from looping but it just turns off.
Click to expand...
Click to collapse
https://drive.google.com/open?id=0B72QQTXqZSRwSkZVYzgzV3phWU0

sukhwant717 said:
https://drive.google.com/open?id=0B72QQTXqZSRwSkZVYzgzV3phWU0
Click to expand...
Click to collapse
Thanks for the link So how do I flash the bin files? xFSTK disconnect from my phone when it tries to flash the OS.
EDIT: After flashing, the phone cannot turn on. I don't know if it is because of the firmware flash. I will charge the phone for a couple of hours.

BlastZones said:
Thanks for the link So how do I flash the bin files? xFSTK disconnect from my phone when it tries to flash the OS.
EDIT: After flashing, the phone cannot turn on. I don't know if it is because of the firmware flash. I will charge the phone for a couple of hours.
Click to expand...
Click to collapse
if you are disconnected at os download even with above fwimage file. then charge it for few hours and then remove the battery connector and leave it for few days as long as you have patience 5 to 7 days. and then try again

sukhwant717 said:
if you are disconnected at os download even with above fwimage file. then charge it for few hours and then remove the battery connector and leave it for few days as long as you have patience 5 to 7 days. and then try again
Click to expand...
Click to collapse
Actually, it turns on again after disconnecting from xFSTK not because of battery. Im starting to believe that it is dead.

BlastZones said:
Actually, it turns on again after disconnecting from xFSTK not because of battery. Im starting to believe that it is dead.
Click to expand...
Click to collapse
Not dead yet I used the wrong value by an extra zero. Now charging up my device to make sure it will boot into bootloader!