Hi all , just a quick question ,
My wife dropped her phone and broke screen and digitizer,
I bought a new one and fitted the new screen , screen comes on , but I have no touch response , I have replaced the ribbons with new ones and factory reset the phone.
But still not touch response.
Any Ideas or have I just got to resign to the fact my wife now has a paper weight .
Cheers in advance
Related
I have recently bought a HTC mozart. I recently broke the glass of the touch screen. The touch screen still works and everythings alright except for the glass. Ive seen replacement screens on ebay. Does anyone know how to change the touch screen on the mozart? thx
That is not good news, I cracked the screen on my HD2 and I had to send it away to get replaced. With the HD2 it is a tough job as the lcd and the glass are attached and it is difficult to change glass only. I replaced glass and lcd.
Unfortunately I was not much help, but I feel your pain.
Good luck..
Well i have a LCD which is broken by fallen and which bought by ebay but i do't know how to replace it
Can't find anything on this
Would be awesome if someone made a guide of some sort.
evilightningod said:
I have recently bought a HTC mozart. I recently broke the glass of the touch screen. The touch screen still works and everythings alright except for the glass. Ive seen replacement screens on ebay. Does anyone know how to change the touch screen on the mozart? thx
Click to expand...
Click to collapse
Im in the middle of changing mine thought i had everything i needed untill i found out that the screen has a glue holding it in. takin ages to sort and i dunno what glue i should get to stick the new one on its annoyin thought it would have been easier than this!!
If you could make a video of it would be awesome.
really wanna fix my shattered screen
hi guys. i broke my hox screen. only the touch panel broken but, yellow tint occured on screen, so i have to change whole screen. do you know a trusted seller for hox screen on ebay etc. ? thanx a lot.
I know this question has been asked in the past but as there was no solution I am posting in the hope of some help.
I replaced my son's cracked digitizer screen (that was working!) with a new replacement screen. The disassembly went well (easy really) and the cracked screen was removed. The new screen was fitted and the assembly went well. All ribbons fittted easily and everything was back in place. I fired on the phone. Everything still fine. When the phone was ready to go I tried to swipe the unlock on screen and ......nothing! The touchscreen was completely unresponsive. I disassembled a further two times in case ribbons were not inserted correctly but still nothing from the screen.
Has anyone attempted the digitizer replacement and encountered this problem and then solved it? Please help my son is so unhappy without his phone.
Theres a chance you bought a faulty digitizer. Your best bet is to buy anotehr xperia off of ebay.
Hi all, i recently bought a new touch panel for my HOX couse the old one is semi working due a fall. With great surprise i see that the original lcd is literally attached to touch glass. So trying to remove original touch, is equal to break original LCD. And this happen to me. However, i bough the a new lcd and finally remount my HOX. But there something strange. The touch is in contact with the display, stange artifacts are visible on the screen on the contact points and the touch has only a semi working response. I've tried to move away the touch from the lcd to be sure that the new components are working...and infact are working well. So i understood thath i must use something to prevent the touch came in contact with the LCD. What can or must i use to complete the remount? Thanks
stalvatero said:
Hi all, i recently bought a new touch panel for my HOX couse the old one is semi working due a fall. With great surprise i see that the original lcd is literally attached to touch glass. So trying to remove original touch, is equal to break original LCD. And this happen to me. However, i bough the a new lcd and finally remount my HOX. But there something strange. The touch is in contact with the display, stange artifacts are visible on the screen on the contact points and the touch has only a semi working response. I've tried to move away the touch from the lcd to be sure that the new components are working...and infact are working well. So i understood thath i must use something to prevent the touch came in contact with the LCD. What can or must i use to complete the remount? Thanks
Click to expand...
Click to collapse
And that is the reason why you can find lcd panel + touch assembly (yes its more expensive), touch panel is already glued to lcd with "special" compound. It is not glued actually, more like adhesive compound.. When you broke lcd you should go for lcd+touch..
But you can check this one, maybe you find some answers :http://forum.xda-developers.com/showthread.php?t=1720900 and here :http://www.repairsuniverse.com/htc-one-x-screen-repair-video.html
Hey guys
so.. I had the usual touch screen issues which seemed to come and go.. I tried to open the back of the case with my bare hands to re-seat the cable and i managed to crack the screen AND digitizer
Ive now replaced the screen and digitizer with a cheapie off ebay and about 3/4 of the touch screen works now, the top and left edge areas don't work!!!
its a different issue to what i had originally which was just phantom presses, do you think its a dodgy digitizer, i need a new cable or maybe Ive just installed the digitizer wrong? personally i thought i did a really good job.
cheers
gfunk