Relock Bootloader Problem: Charging Overtime screen after relock bootloader - Oppo Realme 3 Questions & Answers

Hi guys, please help me i need some assist here.
the chronologies:
- please note that my realme 3 is unlocked and twrp installed (but blank when i reboot into twrp)
- i start the step with unlock tool (in-depth test) apk, install it on the phone, and trying to tap the button "apply to exit in-depth test" but not working with message that i should go to fastboot directly.
- then i run the adb, and reboot the device to fastboot (adb reboot bootloader)
- in the fastboot mode, i run the command fastboot flashing lock, then choose to lock the bootloader on the phone screen
- the phone screen asking for reboot to fastboot, recovery, or normal, here i cant move the arrow to choose one of them
- so i reboot the phone by pushing the power button
- the realme logo is show up, then continue to "charging overtime" warning
- i try to reboot to fastboot, but it fail. try to reboot recovery with the power button + vol combination, the screen still show the warning with a little "recovery mode" text on the bottom left of the screen.
- i connect the phone via USB, but nothing detected or happen
- i do not know, what can i do to solve this problem, so please help me to resolve this problem
here i attach the charging overtime warning screen photo.
thank you in advance,
best regards.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

arunajati said:
Hi guys, please help me i need some assist here.
the chronologies:
- please note that my realme 3 is unlocked and twrp installed (but blank when i reboot into twrp)
- i start the step with unlock tool (in-depth test) apk, install it on the phone, and trying to tap the button "apply to exit in-depth test" but not working with message that i should go to fastboot directly.
- then i run the adb, and reboot the device to fastboot (adb reboot bootloader)
- in the fastboot mode, i run the command fastboot flashing lock, then choose to lock the bootloader on the phone screen
- the phone screen asking for reboot to fastboot, recovery, or normal, here i cant move the arrow to choose one of them
- so i reboot the phone by pushing the power button
- the realme logo is show up, then continue to "charging overtime" warning
- i try to reboot to fastboot, but it fail. try to reboot recovery with the power button + vol combination, the screen still show the warning with a little "recovery mode" text on the bottom left of the screen.
- i connect the phone via USB, but nothing detected or happen
- i do not know, what can i do to solve this problem, so please help me to resolve this problem
here i attach the charging overtime warning screen photo.
thank you in advance,
best regards.
Click to expand...
Click to collapse
Did u get the solution of the problem, I am also having the same problem, so, if u have got the solution then please share with me, its urgent, I request you to please help me. :crying:

go to the realme service center, its free to have back the system normal.

Here is method
Hey dude don't worry you still have chance, just go on realme website and download latest update, after that massage ne i will give a img file then flash it and now install update by recovery as i provided realme recovery img . And now lock bootloader from pc . By command
Fastboot flashing lock(now tao the volume - button and power button)
Fastboot reboot

Same problem
How can i flash it.. can u send me that file..

Bro please help me
Bro you solve your realme 3 changing overtime error please help me how to solve it please please bro. If you go to service center then told me how many charhes to solve this problem and how many time they want to solve this problem. Due to lockdown i am unable to go into service center help me bro
---------- Post added at 10:18 PM ---------- Previous post was at 10:13 PM ----------
mohit310p said:
Hey dude don't worry you still have chance, just go on realme website and download latest update, after that massage ne i will give a img file then flash it and now install update by recovery as i provided realme recovery img . And now lock bootloader from pc . By command
Fastboot flashing lock(now tao the volume - button and power button)
Fastboot reboot
Click to expand...
Click to collapse
Bro when we connect it with pc they only show charging overtime error and unable to boot fastboot mode please help me give me a solution

mohit310p said:
Hey dude don't worry you still have chance, just go on realme website and download latest update, after that massage ne i will give a img file then flash it and now install update by recovery as i provided realme recovery img . And now lock bootloader from pc . By command
Fastboot flashing lock(now tao the volume - button and power button)
Fastboot reboot
Click to expand...
Click to collapse
will i be able to install latest update using sd card,? will flashing a new rom work or not

pavan chaudhari said:
Bro you solve your realme 3 changing overtime error please help me how to solve it please please bro. If you go to service center then told me how many charhes to solve this problem and how many time they want to solve this problem. Due to lockdown i am unable to go into service center help me bro
---------- Post added at 10:18 PM ---------- Previous post was at 10:13 PM ----------
Bro when we connect it with pc they only show charging overtime error and unable to boot fastboot mode please help me give me a solution[/QUOTEyou need to go to service center because you losted your recovery by locking bootloader
---------- Post added at 02:08 AM ---------- Previous post was at 02:06 AM ----------
Darshilsolankiuser said:
How can i flash it.. can u send me that file..
Click to expand...
Click to collapse
I think your problem is solved if not then send me a mail i will give instant reply.
---------- Post added at 02:10 AM ---------- Previous post was at 02:08 AM ----------
zakria567 said:
will i be able to install latest update using sd card,? will flashing a new rom work or not
Click to expand...
Click to collapse
Yes you can install new updates by recovery like twrp and other but you need to decrypt it first.
Click to expand...
Click to collapse

mohit310p said:
pavan chaudhari said:
Bro you solve your realme 3 changing overtime error please help me how to solve it please please bro. If you go to service center then told me how many charhes to solve this problem and how many time they want to solve this problem. Due to lockdown i am unable to go into service center help me bro
---------- Post added at 10:18 PM ---------- Previous post was at 10:13 PM ----------
Bro when we connect it with pc they only show charging overtime error and unable to boot fastboot mode please help me give me a solution[/QUOTEyou need to go to service center because you losted your recovery by locking bootloader
---------- Post added at 02:08 AM ---------- Previous post was at 02:06 AM ----------
hello bro, i finally got the fix you just need to install the latest ozip file ( https://download.c.realme.com/osupdate/RMX1821EX_11_OTA_0280_all_3V2ARw7ZSbCv.ozip ) download from here, install it from stock recovery or any other twrp....just fixed my real me 3, which has the same issue,
I think your problem is solved if not then send me a mail i will give instant reply.
---------- Post added at 02:10 AM ---------- Previous post was at 02:08 AM ----------
Yes you can install new updates by recovery like twrp and other but you need to decrypt it first.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

about realme 3 charging overtime error
but I am unable to connect the phone to the pc because i am unable to boot into fastboot mode and the mobile phone is not detecting by computer please help me
---------- Post added at 08:12 AM ---------- Previous post was at 08:00 AM ----------
zakria567 said:
but bro when i open recovery they only show charging overtime and small recovery mode seen in the bottom left corner help me please help me
Click to expand...
Click to collapse

mohit310p said:
pavan chaudhari said:
Bro you solve your realme 3 changing overtime error please help me how to solve it please please bro. If you go to service center then told me how many charhes to solve this problem and how many time they want to solve this problem. Due to lockdown i am unable to go into service center help me bro
---------- Post added at 10:18 PM ---------- Previous post was at 10:13 PM ----------
Bro when we connect it with pc they only show charging overtime error and unable to boot fastboot mode please help me give me a solution[/QUOTEyou need to go to service center because you losted your recovery by locking bootloader
---------- Post added at 02:08 AM ---------- Previous post was at 02:06 AM ----------
I think your problem is solved if not then send me a mail i will give instant reply.
---------- Post added at 02:10 AM ---------- Previous post was at 02:08 AM ----------
Yes you can install new updates by recovery like twrp and other but you need to decrypt it first.
Click to expand...
Click to collapse
bro how can i flash the recovery if i cant go to fastboot mode and recovery mode?
how do you do that?
kindly give a instruction or video instruction for clear information..
Click to expand...
Click to collapse

If it's in warranty then go to realme service centre.
Have same problem it's free in warranty no matters if you unlock and relock bootloader it can be done in 5 mins in service centre but out of warranty may costs you larger amount of Rs.1700 in service centre but it can be done by online flashing in Rs.1200 in your local stores but their is a risk of emmc damage realme 3 PINOUT are very critical.
Recommend you to realme service centre.:angel:

about realme 3 charging overtime error
Tushar Rajput said:
Have same problem it's free in warranty no matters if you unlock and relock bootloader it can be done in 5 mins in service centre but out of warranty may costs you larger amount of Rs.1700 in service centre but it can be done by online flashing in Rs.1200 in your local stores but their is a risk of emmc damage realme 3 PINOUT are very critical.
Recommend you to realme service centre.:angel:
Click to expand...
Click to collapse
bro I am gone to realme service center the told me we hve to chang the motherboard they told me the price 7000 for 3 gb 32 gb varient .its very wrong please help me
---------- Post added at 04:10 PM ---------- Previous post was at 04:10 PM ----------
Tushar Rajput said:
Have same problem it's free in warranty no matters if you unlock and relock bootloader it can be done in 5 mins in service centre but out of warranty may costs you larger amount of Rs.1700 in service centre but it can be done by online flashing in Rs.1200 in your local stores but their is a risk of emmc damage realme 3 PINOUT are very critical.
Recommend you to realme service centre.:angel:
Click to expand...
Click to collapse
bro I am gone to realme service center the told me we hve to change the motherboard they told me the price 7000 for 3 gb 32 gb varient .its very wrong please help me

For "charging overtime" error
Some people got "charging overtime" error after relocking bootloader with third party recovery.
Do not do this mistake.
Finally there is a solution for this. U have to flash ur phone on EDL mode.thats all and finally ur phone will boot up.

Rajatkumar825 said:
Some people got "charging overtime" error after relocking bootloader with third party recovery.
Do not do this mistake.
Finally there is a solution for this. U have to flash ur phone on EDL mode.thats all and ur phone finally boot up.
Click to expand...
Click to collapse
How to go to EDL mode?
I think EDL mode can be enabled through recovery. And my phone is not going to recovery !
Plz reply ASAP

There are many ways to access EDL mode.
- You have to install mtk drivers on ur PC first,then switch off your phone and connect to pc simultaneously pressing vol+- key .
You can see at device manager there is a mtk device connected.
If u have any problem then contact me. I am happy to help u.

Rajatkumar825 said:
There are many ways to access EDL mode.
- You have to install mtk drivers on ur PC first,then switch off your phone and connect to pc simultaneously pressing vol+- key .
You can see at device manager there is a mtk device connected.
If u have any problem then contact me. I am happy to help u.
Click to expand...
Click to collapse
Not working bro....
any other method to access the EDL mode?

Hey .. if anyone has solve this problem .. chargin overtime then please reply....

Samyak Bendre said:
Hey .. if anyone has solve this problem .. chargin overtime then please reply....
Click to expand...
Click to collapse
I think XDA Forum is completely dead now. They no longer replay nor have solutions to provide.
i am waiting for atleast 1/2 month for "Charging overtime" error, but getting no help from here.
i Tried myself to fix this but was unable to do so.
Then i visited the realme center and they told me that u need to change the motherboard(costs Rs. 7000).
Now i bricked my device ! lol

Bro... Do u think with the help of SP flash tool we can make our device normal?

Related

[q] lg optimus g f180s stuck in starting logo: Please help me

HELLO BROTHERS AND FRIEND,
I AM USING LG OPTIMUS G F180S. AFTER UPDATING THE KITKAT VERSION, I WAS TRYING TO DEGRADE IT TO JELLYBEAM FOR ROOTING. AFTER COMPLETION UPGRATION, THE PHONE WAS STUCK IN LOGO MOOD. PLEASE HELP ME TO SOLVE THIS. PLEASE PLEASE PLEASE PLEASE.
pLEASE HELP ME BROTHER'S.
REGARDS IN ADVANCE AND ALWAYS.
CLICKANU
while updating again in download mode, it shows phone not found
clickanu said:
hello brothers and friend,
i am using lg optimus g f180s. After updating the kitkat version, i was trying to degrade it to jellybeam for rooting. After completion upgration, the phone was stuck in logo mood. Please help me to solve this. Please please please please.
Please help me brother's.
Regards in advance and always.
Clickanu
Click to expand...
Click to collapse
please help me
please help me
Now it shows this error (attached) while updating the file again
clickanu said:
please help me
please help me
Click to expand...
Click to collapse
help me please!!!!!!!
Help me please!!!!!
Regards
http://forum.xda-developers.com/showthread.php?t=2010624&page=49
Have you tried this method? Can you connect your phone in download mode?
Please see these attached files
clickanu said:
help me please!!!!!!!
Help me please!!!!!
Regards
Click to expand...
Click to collapse
while try to upgrading kitkat, it shows "extract file error" and after restart "the logo appears only"...see the video.
Please help me !!! Please someone help me dear (
regards..
Thanks for reply
ahmed xperia p said:
http://forum.xda-developers.com/showthread.php?t=2010624&page=49
have you tried this method? Can you connect your phone in download mode?
Click to expand...
Click to collapse
yes, i can connect the phone in download mode...
Regards,
clickanu said:
yes, i can connect the phone in download mode...
Regards,
Click to expand...
Click to collapse
Ok relax if you can connect in download mode 90% chances are your phone will be recovered.
---------- Post added at 11:46 PM ---------- Previous post was at 11:36 PM ----------
clickanu said:
yes, i can connect the phone in download mode...
Regards,
Click to expand...
Click to collapse
What kdz are you trying to flash? Broken kdz file also results in extract error, try downloading some other kdz specific to your phone model.
Please help me out
Ahmed Xperia p said:
Ok relax if you can connect in download mode 90% chances are your phone will be recovered.
Click to expand...
Click to collapse
Dear Brother,
the link you provided, i couldnt understand. I am almost new user and new in LG. Please help me out, If you tell me the steps, how to solve...then i will be very much grateful to you Brother.
Regards,
clickanu said:
Dear Brother,
the link you provided, i couldnt understand. I am almost new user and new in LG. Please help me out, If you tell me the steps, how to solve...then i will be very much grateful to you Brother.
Regards,
Click to expand...
Click to collapse
Just check first post of the given link . It's easy .
---------- Post added at 11:57 PM ---------- Previous post was at 11:52 PM ----------
what i understand is you successfully flashed jelly bean kdz but after that you are stuck in bootloop? If that is the case all you need is to wipe your phone and itll boot
how do i wipe the phone, cause there is no recovery mode found in my phone
Ahmed Xperia p said:
Just check first post of the given link . It's easy .
---------- Post added at 11:57 PM ---------- Previous post was at 11:52 PM ----------
what i understand is you successfully flashed jelly bean kdz but after that you are stuck in bootloop? If that is the case all you need is to wipe your phone and itll boot
Click to expand...
Click to collapse
I dont find any recovery mode in my phone to wipe and reboot...
and why it is not updated to kitkat through kdz, it is shown file extract error....Please help.
Sorry for bothering you.
regards and thanks.
Pleas switch off your phone. Press volume -- volume down key and press power button together. On screen display you will get option for hard reset your phone, click power button twice, then your phone will boot after 5 to 10 seconds after a hard reset..
clickanu said:
I dont find any recovery mode in my phone to wipe and reboot...
and why it is not updated to kitkat through kdz, it is shown file extract error....Please help.
Sorry for bothering you.
regards and thanks.
Click to expand...
Click to collapse
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Follow this procedure and download wipe batch file from here http://www.mediafire.com/?ru7erfxsz7p7s3p
All credit goes to @potatohead for his useful thread
---------- Post added at 12:22 AM ---------- Previous post was at 12:19 AM ----------
cooljay5 said:
Pleas switch off your phone. Press volume -- volume down key and press power button together. On screen display you will get option for hard reset your phone, click power button twice, then your phone will boot after 5 to 10 seconds after a hard reset..
Click to expand...
Click to collapse
This is the most easiest way to fix .
Ahmed Xperia p said:
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Follow this procedure and download wipe batch file from here http://www.mediafire.com/?ru7erfxsz7p7s3p
All credit goes to @potatohead for his useful thread
Click to expand...
Click to collapse
Extract file error could be because of a broken kdz or once a kdz larger than 1 gb is flashed using kdz updater it also gives this error
Thanks Seniors...Grateful....to You
Ahmed Xperia p said:
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Follow this procedure and download wipe batch file from here http://www.mediafire.com/?ru7erfxsz7p7s3p
All credit goes to @potatohead for his useful thread
---------- Post added at 12:22 AM ---------- Previous post was at 12:19 AM ----------
This is the most easiest way to fix .
Extract file error could be because of a broken kdz or once a kdz larger than 1 gb is flashed using kdz updater it also gives this error
Click to expand...
Click to collapse
Another thing, now my phone doesnt show any IMEI no, and please suggest me how do i get it and how do i update the kitkat version now...can i root the phone after updating the kitkat or now?
Please suggest...You are just Great
Regards and Thanks,
clickanu said:
Another thing, now my phone doesnt show any IMEI no, and please suggest me how do i get it and how do i update the kitkat version now...can i root the phone after updating the kitkat or now?
Please suggest...You are just Great
Regards and Thanks,
Click to expand...
Click to collapse
No IMEI means you need to restore EFS backup ,which i doubt you did not make
I didnt know anything about EFS backup....!!! Is there anything wrong with my phone.!
Ahmed Xperia p said:
No IMEI means you need to restore EFS backup ,which i doubt you did not make
Click to expand...
Click to collapse
I dont know anything about EFS??? Please let me know and help me out Brother, You are the boss. How do i get it back? How do i remove the korean system softwares. Please help me out....Regards
signal working fine and phone recognizes sim card ? Check if imei is shown without sim ? Currently you're on which firmware and what firmware you flashed earlir?
Sent from my LG-E975 using XDA Premium 4 mobile app
Thanks Senior for your patience to reply....
Ahmed Xperia p said:
signal working fine and phone recognizes sim card ? Check if imei is shown without sim ? Currently you're on which firmware and what firmware you flashed earlir?
Sent from my LG-E975 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yees, Signal working fine and phone recognizes the sim card.
IMEI not shown without sim Dear Brother. Currently I am on version 4.1.2, jellybean,
I flashed with jellybeam F180S20d_00.kdz.
Please suggest me and help me out
Thanks and regards,
clickanu said:
Yees, Signal working fine and phone recognizes the sim card.
IMEI not shown without sim Dear Brother. Currently I am on version 4.1.2, jellybean,
I flashed with jellybeam F180S20d_00.kdz.
Please suggest me and help me out
Thanks and regards,
Click to expand...
Click to collapse
Another interesting thing is that, in my phone it is shown F180S but when i connect it to computer via usb, the LG support tool software shows it LGV500.
What about the matter Brother???
Thanks and Regards
If you've lost your imei without making EFS backup , you've lost it forever. There's no fix for this i guess. Best bet for you is use your phone as it is.
Sent from my LG-E975 using XDA Premium 4 mobile app
---------- Post added at 02:06 AM ---------- Previous post was at 02:05 AM ----------
You can try flashing stock kdz for your modle, it may help you but nit guaranteed.
Sent from my LG-E975 using XDA Premium 4 mobile app
Can i root my phone now or after updating to kitkat?

Stuck Asus Logo And Cant Boot Recovery [HELP]

i double flash twrp with original recovery.img on my zenfone 2 and bootloop asus logo , cant access recovery mode
i try power + volume up and its back to asus logo help me pls
Help Me pls
TitusTeguh said:
Help Me pls
Click to expand...
Click to collapse
Can you enter bootloader ?
what phone ?
Build number ?
IFWI version in bootloader ?
Power and volume up, once vibrates and looks like it going into a boot sequence, keep holding volume up but let go of the power button
timbernot said:
Can you enter bootloader ?
what phone ?
Build number ?
IFWI version in bootloader ?
Click to expand...
Click to collapse
phone : zenfone 2 ze551ml
i dont know version bootloader
i try power + volume up its turn off and automatic going turn on and stuck asus logo
cant do anything
uniacidz said:
Power and volume up, once vibrates and looks like it going into a boot sequence, keep holding volume up but let go of the power button
Click to expand...
Click to collapse
i did but for 1 min and its going turn off itself
TitusTeguh said:
phone : zenfone 2 ze551ml
i dont know version bootloader
i try power + volume up its turn off and automatic going turn on and stuck asus logo
cant do anything
Click to expand...
Click to collapse
You can`t enter bootloader , then you are bricked .
Lots of unbricking threads here on XDA:good:
timbernot said:
You can`t enter bootloader , then you are bricked .
Lots of unbricking threads here on XDA:good:
Click to expand...
Click to collapse
how ?? , yes in xda much method to unbrick but they can turn on or can going to bootloader i cant do both
i cant even connect my phone to my pc
TitusTeguh said:
how ?? , yes in xda much method to unbrick but they can turn on or can going to bootloader i cant do both
i cant even connect my phone to my pc
Click to expand...
Click to collapse
How ?
By reading the unbrick threads.
If you get vibes when long pressing power button , blank screen etc , your phone can be revived.
timbernot said:
How ?
By reading the unbrick threads.
If you get vibes when long pressing power button , blank screen etc , your phone can be revived.
Click to expand...
Click to collapse
all method using fastboot ==
i cant go to fastboot / recovery mode
i know how to solve this ... i faced the same problem .. i tried to flash TWRP M ..to install naugot ... but thn i damaged the recovery and i couldnt boot to bootloader .. i can help anyone who needs it ! contact me on whatsapp +918050234291
---------- Post added at 01:43 PM ---------- Previous post was at 01:42 PM ----------
TitusTeguh said:
all method using fastboot ==
i cant go to fastboot / recovery mode
Click to expand...
Click to collapse
i know how to solve this ... i faced the same problem .. i tried to flash TWRP M ..to install naugot ... but thn i damaged the recovery and i couldnt boot to bootloader .. i can help anyone who needs it ! contact me on whatsapp +918050234291
JB_jeet said:
i know how to solve this ... i faced the same problem .. i tried to flash TWRP M ..to install naugot ... but thn i damaged the recovery and i couldnt boot to bootloader .. i can help anyone who needs it ! contact me on whatsapp +918050234291
---------- Post added at 01:43 PM ---------- Previous post was at 01:42 PM ----------
i know how to solve this ... i faced the same problem .. i tried to flash TWRP M ..to install naugot ... but thn i damaged the recovery and i couldnt boot to bootloader .. i can help anyone who needs it ! contact me on whatsapp +918050234291
Click to expand...
Click to collapse
i cant whatsapp u no phone can u just explain here? pls
I originally flashed TWRP with bootloader locked and I was still able to get back into bootloader and initiate fastboot cmds. This was on a ZE500CL Z00D.
I think i just power cycled the phone a few times. I did some combos that brought up the intel inside then after that it brought fastboot up.

Lenovo vibe k5 plus keep reboot when starting. Can anyone help me?

Hello everyone. I have a problem with my lenovo vibe k5 plus. When I turn it on, I can see lenovo logo and then it reboot again. It repeat forever. I didn't use custom room and my phone wasn't root. Can anyone help me? Sorry for my bad english.
v7676uy said:
Hello everyone. I have a problem with my lenovo vibe k5 plus. When I turn it on, I can see lenovo logo and then it reboot again. It repeat forever. I didn't use custom room and my phone wasn't root. Can anyone help me? Sorry for my bad english.
Click to expand...
Click to collapse
The same problem with my device and have not found a solution
Please help me pm telegram @ muzz17
---------- Post added at 06:42 PM ---------- Previous post was at 06:35 PM ----------
Syara said:
The same problem with my device and have not found a solution
Please help me pm telegram @ muzz17
Click to expand...
Click to collapse
3 files stock rom successfully downloaded via qfil but still the same
I continue to install twrp via fastboot also successfully but still not enter recovery mode
What method should I do to get my device back to normal
Syara said:
The same problem with my device and have not found a solution
Please help me pm telegram @ muzz17
---------- Post added at 06:42 PM ---------- Previous post was at 06:35 PM ----------
3 files stock rom successfully downloaded via qfil but still the same
I continue to install twrp via fastboot also successfully but still not enter recovery mode
What method should I do to get my device back to normal
Click to expand...
Click to collapse
Do you think the problem is EMMC IC was damaged?
v7676uy said:
Do you think the problem is EMMC IC was damaged?
Click to expand...
Click to collapse
Yes it is possible: rolleyes:
I think you should go to lenovo care. In past I also faced this issue. And they solved my problem.

Bootloop on download mode.

Hello everyone,
I've tried to flash a rom using odin on my J610G and it failed. Now while trying to get into download mode the device restarts automatically. It's recognized by the computer but it won't stay on download mode. It won't boot into the OS since it prompts "An error has ocurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
I tried the smart switch but it won't stay on it, It keeps restarting. Any suggestion ?
I have the exact same problem too! It's so frustrating coz I just can't get my phone to stay on Odin mode without it restarting to that stupid error screen:crying:
Simple. Charge your battery with the mains charger, its flat.
Did you find a fix?
---------- Post added at 06:16 PM ---------- Previous post was at 05:39 PM ----------
I ****ed my mom's fone and its constantky restarts ; I can reach download mode but only for an instant. recovery isnt there at all. Please reply how you fixed it please I beg you. I want download mode to stay for some time so that i can boot new frimware but that isnt the case. I am crying man please help.
---------- Post added at 06:51 PM ---------- Previous post was at 06:16 PM ----------
ashyx said:
Simple. Charge your battery with the mains charger, its flat.
Click to expand...
Click to collapse
LiLJaY23 said:
I have the exact same problem too! It's so frustrating coz I just can't get my phone to stay on Odin mode without it restarting to that stupid error screen:crying:
Click to expand...
Click to collapse
ashyx said:
Simple. Charge your battery with the mains charger, its flat.
Click to expand...
Click to collapse
I ****ed my mom's fone and its constantky restarts ; I can reach download mode but only for an instant. recovery isnt there at all. Please reply how you fixed it please I beg you. I want download mode to stay for some time so that i can boot new frimware but that isnt the case. I am crying man please help. And phone only goes to bootloop when its on charge or usb else doesnt turn on at all.
rexytm said:
Did you find a fix?
---------- Post added at 06:16 PM ---------- Previous post was at 05:39 PM ----------
I ****ed my mom's fone and its constantky restarts ; I can reach download mode but only for an instant. recovery isnt there at all. Please reply how you fixed it please I beg you. I want download mode to stay for some time so that i can boot new frimware but that isnt the case. I am crying man please help.
---------- Post added at 06:51 PM ---------- Previous post was at 06:16 PM ----------
I ****ed my mom's fone and its constantky restarts ; I can reach download mode but only for an instant. recovery isnt there at all. Please reply how you fixed it please I beg you. I want download mode to stay for some time so that i can boot new frimware but that isnt the case. I am crying man please help. And phone only goes to bootloop when its on charge or usb else doesnt turn on at all.
Click to expand...
Click to collapse
I got the same problem. I had to extract the battery and charged it with a external battery charger, because if I tried to connect the phone with the normal usbC cable, the continued with the boot loop y download mode.
did you find a solution sir?
Xyanide.Fuentes said:
Hello everyone,
I've tried to flash a rom using odin on my J610G and it failed. Now while trying to get into download mode the device restarts automatically. It's recognized by the computer but it won't stay on download mode. It won't boot into the OS since it prompts "An error has ocurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
I tried the smart switch but it won't stay on it, It keeps restarting. Any suggestion ?
Click to expand...
Click to collapse
I recently tried to install a custom ROM in my samsung j6+ but halfway through it my PC turned off.
Then the problem starts i decided to reboot my phone but it shows this error "No command" " #Reboot recovery cause is [[check_bootmode]RebootRecoveryWithKey]#
Block-based OTA
Supported API: 3
# MANUAL MODE v1.0.0#
E:Failed to mount / cache: Invalid argument
The error message keeps appearing for just a fraction of a second then disappear and appear again
I tried to go to recovery mode but no luck i cant get to it
I drained the battery to turn off the device then go download mode but after get to it, it also keep restarting
help me please. thank you
I am having the same problem, is there a solution other than "Charge your Phone"?

Cant´t boot into system. Help, please

I have used MSM tool and it ended successfully. Now, I can boot to fastboot and recovery, but stuck in oneplus logo when I try to boot into system.. Several trials but same result.
shut your phone down and please go to this https://forum.xda-developers.com/oneplus-3/how-to/op3-collection-unbrick-tools-t3896722 and download android 8.0 version 5.08
unbrick tool and please run it and get back to me if you have any luck
Thanks so much , but same result.
are you the original owner or not because if you are the original owner and have all the information about the phone contact oneplus and they will help you better because on here if it is hardware there is not a lot we can do
---------- Post added at 07:45 PM ---------- Previous post was at 07:36 PM ----------
Also try and get into fastboot mode and try and flash the boot.img and system.img and user data.img and cache.img manually
Have you got it sorted
No. Maybe a hardware issue. Thanks anyway
Try going in fastboot mode and unlocking the bootlooder
kallum7 said:
Try going in fastboot mode and unlocking the bootlooder
Click to expand...
Click to collapse
Once I have used MSM Tool, I can't go to enable OEM unlock and USB debugging
Take the two screws out near the charging port and take the back cover off then disconnect the battery and reconnect it it sometimes help
kallum7 said:
Take the two screws out near the charging port and take the back cover off then disconnect the battery and reconnect it it sometimes help[/QUOTE
Like a miracle, my oneplus 3 is alive again. I used from https://forum.xda-developers.com/one...tools-t3896722 the repacked OOS905.
I got boot into system but the screen wasn't responssive.
I removed the back cover and reconnected all the conectors.
Then, turned on the device and the screen was responssive and I was able to turn on the OEM unlock and USB debugging.
Unlocked the bootloader and flashed Evolution X latest Q build.
All is working now.
Click to expand...
Click to collapse

Categories

Resources